P
PrintablesKenny
HP NC552SFP Dual Port 10Gbps SFP+ Card Low Profile Bracket
Printed with ERYONE PLA 180°C With support PRUSA i3 MKS+
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
- Pobrania
- 76
- Polubienia
- 6
- Ocena
- 0
Wyniki wyszukiwania: bps
28 modeli
P
Printablesludufre
NAS/Storage Mini-ITX 6 disks + 2.5Gbps
Mini ITX NAS with external power supply and 6 HDDs bays. Print parts with 30% infill and 0.20mm (Standard Quality) The dust.stl must be printed without top and bottom layers and with 75% or more infill. The…
- Pobrania
- 337
- Polubienia
- 75
- Ocena
- 0
P
PrintablesJulien L
Airbrush support for TIMBERTECH ABPST05
It's just a support for my airbrush compressor. It might fit to other compressor as its generic. Category: Art Tools
- Pobrania
- 257
- Polubienia
- 19
- Ocena
- 0
P
PrintablesMartinRowan
Dell QLogic 57810S Dual Port 10Gbps SFP+ Card Low Profile Bracket
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
- Pobrania
- 231
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJulien L
"NEO for IWATA" support on a TIMBERTECH ABPST05 compressor
t's just a support for my airbrush compressor. It might fit to other compressor as its generic. It fits perfectly (i think) for the "NEO for IWATA" airbrush. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes…
- Pobrania
- 70
- Polubienia
- 9
- Ocena
- 0
P
PrintablesHeXXy
6Gbps Mini-SAS SFF-8088 Recepticle Dust Cover
Designed this model to fill some unused SFF-8088 receptacles to prevent dust from getting in them. Printed in TPU with 98A hardness. Fits perfectly
- Pobrania
- 63
- Polubienia
- 7
- Ocena
- 0
P
PrintablesAdam Cwynar
Mini PCIE 2.5GBPS Gigabit Network Card model YM3712
I bought from aliexpress but with no pci barcket so i made it myself. Enjoy !
- Pobrania
- 50
- Polubienia
- 10
- Ocena
- 5
P
PrintablesKiko Lobo
74mm Model Rocket Tube Avionics Bay for BPS Blip
This is an avionics bay for BPS Blip Flight Computer + Fuselage Tube connector for a 74mm Model Rocket . It connects 2 (74mm) x cardboard body tubes and holds the battery and the BLIP PCB Board in place. It is designed to be used with…
- Pobrania
- 49
- Polubienia
- 5
- Ocena
- 0
P
Printablesczsmola
NICGIGA 10Gbps Network Switch Bracket
8 Port X 10Gb Base-T Ports, NICGIGA 10Gbps Network Switch Required a frame to mount the Ethernet switch to a wall. The Size has Been Adjusted from original to Fit different Device. 182mm x 45mm Very Tight Fit, Just Force it. I printed on…
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 0
P
Printablesdskowronski
UGREEN 40Gbps M.2 NVMe Enclosure and 40mm Fan Holder - 3D Parametric Model (stackable)
Intro 3D Parametric Model (OpenSCAD) of holder for UGREEN 40Gbps M.2 NVMe Enclosure and standard 40mm PC fan (stackable) Detailed model design description, as well as source code are hosted on GitHub Demo photos uploaded here are in two…
- Pobrania
- 27
- Polubienia
- 7
- Ocena
- 0
P
PrintablesParts Oven
Purium 5.5 Tbps Scoop
I'm a little over 3 weeks into an amazing 30 day transformation with Purium products. I feel great and am down over 15 pounds of flab! The kit doesn't include a scoop for the green drink so I made my own.
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
Printables4o66
MacBook Pro Simple Stand (MBPSS)
Designed to allow the screen to open 10º past vertical. CAD file is parametric: OnShape
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
Printablesaudries
ORICO 40Gbps M.2 NVMe SSD Enclosure Bumper
I print with no support in TPU
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMrMarco74
Under Desk Mount GiGaPlus 2.5Gbps 10 Port Switch
A simple designed under desk mount for a GiGaPlus 2.5Gbps 10 Port Switch. Print it front face down with supports.
- Pobrania
- 18
- Polubienia
- 4
- Ocena
- 0
P
PrintablesEttienne M
2" BSP to 3/4" bps pipe manifold adapter thing
I used two of these to connect 3 coils of ¾" ldpe pipe to the 2" pool pump outlet for swimming pool solar heating. Printed out of ABS, smoothed by acetone brushing. So far they've held up for 6 years.
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHigany
Wall mounting for BPST 1/2" water pipe
Wall mounting for BPST 1/2" water pipe. (Somewhat) Parametric Fusion360 project file included. The perpendicular side to the wall is 1mm shorter than the diameneter of the pipe to ensure tight mounting. This is parametric in the F360…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintableseuRYEne
BPS 7000 - Boxer Pro Buttplate
I give you the BPS-7000! The shoulder stock on the original Boxer Pro has an uncomfortable buttplate, way too small even for a small guy like me. Finally there is a fix! No hardware needed, just print it, snap it on and go dominate the…
- Pobrania
- 13
- Polubienia
- 7
- Ocena
- 0
P
PrintablesZiemniaczenka
Ugreen 9in1 5Gbps TPU cover
Designed to fit Ugreen 9in1 5Gbps version, might fit other from the series (model CM498). Two versions of the bottom piece: - short one only protects dock - long one additionally protects sticking out MicroSD card so you can carry it…
- Pobrania
- 12
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDonpro Research
Bps.space Logo-coin
This is a logo-coin i traced with lines form the new Bps.space Logo in Autodesk Fusion 360! I printed it in the original Prusa Mini with 2 Filament colours (Vanila White) and Galaxy Black. Additionaly and recommended is a Filament Change…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAniva
Dell H310 6Gbps SAS HBA, LSI 9211-8i. 1 slot Fan shroud
Laptop fan shroud for LSI 9211. You have to file and cut some parts.
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLev 3DD
Acasis 10-port 10Gbps USB Hub OpenGrid Mount
Acasis 10-port 10Gbps USB Hub OpenGrid Mount. Uses M4 hardware.
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHarryMax
UGREEN-SSD-Festplattengehäuse, 40Gbps
Da das Kabel zum Mac etwas steif ist, fällt das Gehäuse um und liegt auf der Seite. Das gefiel mir nicht. Deshalb 2 von diesen Standfüßen gedruckt und das Gehäuse eingeschoben. Nun bleibt das Ganze stehen.
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
PrintablesWorld Lord
MAIWO40Gbps + Deepcool CK-AM209 passive cooling radiator mount printable no support
MAIWO40Gbps + Deepcool CK-AM209 passive cooling radiator mount printable no support. I made it.
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
Printablesunderactive
UGREEN 40Gbps M.2 NVMe SSD Case Shell
Vented shell for the UGREEN 40Gbps M.2 NVMe SSD Enclosure ( https://www.ugreen.com/en-au/products/au-55316 ). This enclosure has heatsinks on both sides, so there's no flats for mounting to a laptop. This shell provides two 1" x 3"…
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRHX
ACASIS 40Gbps M.2 NVMe SSD Enclosure - TBU 405 Pro
3D-printable cradle/holster that wraps your ACASIS TBU405 PRO aluminium SSD enclosure and mounts it to the lid of a 13" MacBook Pro via a Quad Lock–compatible four-point twist lock. The drive slides in and is held by a snap-on end-cap;…
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDave Corder
PCI Low Profile bracket for Supermicro AOC-STGN-i1s 10Gbps card
Customized in OpenSCAD to fit the Supermicro AOC-STGN-i1s card
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLBENEGAS
Desk shelf to raise NICGIGA 8P 5gbps Switch from desk surface
Here are 2 platforms to raise the NICGIGA 8P 5gbps switch from the desk surface. Bottom switch plate get a tiny hot, so raising it helps with cooling. Then, you have 2 "arms" that allow you to install a Noctua NF-F12 (5v pwm) fan blowing…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCatServant
Braced BPS Rocket Cradle
This is a remix of Joe Barnard's BPS Rocket Cradle that adds interconnecting braces to maintain spacing between multiple cradles. The braces connect to the cradles using dovetail joints. Two different lengths of braces are included: 150mm…
- Pobrania
- 1
- Polubienia
- 2
- Ocena
- 0