Wyniki wyszukiwania: braun

Sortowanie

357 modeli

P
PrintablesJolly

Braun Satin Hair 1 PowerPerfection HD180 Hair Dryer - Level Switch

The plastic switch of my aunt's hair dryer broke, so I did the only thing conceivable to a maker. I designed and printed the part. It took me a few tries to get the dimensions exactly right, but it worked in the end. I printed the part…

Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu

Pobrania
35
Polubienia
2
Ocena
0
P
Printables3DPrintM.D.

Replacement Lid and Knob plus a Silencer Kit for circa 1990 Braun 4045 Coffee Grinder

The lid and timer knob on my circa 1990 Braun Coffee Grinder broke and, even though it is very loud, I did not want to part with it. So, I created these 3D printed repair parts that both served as replacements for the lid and knob and…

Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
29
Polubienia
1
Ocena
0
P
PrintablesAndrás Bognár

Minimalist Oral-B Braun Electric Toothbrush Wall Mount

Every model I found for hiding the cable of the Braun / Oral-B toothbrush wall charger was not enough good/polished/perfect/minimal for me so I designed this and I hope you will enjoy this too. The design is based on the german 55mm…

Pobrania
3947
Polubienia
676
Ocena
4,93
P
PrintablesEve

Braun DN-40 Retro Phone Stand for iPhone 15 with Apple Original Case

I really liked the design from the Youtuber Scott Yu-Jan but I use a phone case so I made it bigger

Pobrania
1017
Polubienia
218
Ocena
4
P
Printablesadrianvm

Wall mount Oral-B / Braun Toothbrush Head Holder

I wanted a simple way to hang my toothbrush heads on the wall, and the models I found seemed overly big, so I made this simple model with four round-edged cradles to hold four heads. I printed in in PLA and I mounted it on the tile wall…

Pobrania
678
Polubienia
66
Ocena
5
P
PrintablesANR

Braun Silk Epil 5, 7, 9 gear collections

I present to you the gear collection prepared for the 5,7,9 series of Braun Silk Epilator models. In order to prevent global warming caused by excessive consumption, repairing and extending the life of your products will support the life…

Pobrania
600
Polubienia
33
Ocena
5
P
Printablesai91

Oral-B Toothbrush Braun 3757 dual wall mounts

Two holders: for dual toothbrush (3 different versions) for quad heads The thing was inspired and partially remixed from following sources: https://www.thingiverse.com/thing:1916335 - for toothbrush holder v2…

Pobrania
555
Polubienia
89
Ocena
5
P
Printablesjoeworks

Shaver and Grooming Tools Organizer Tray - CUSTOMIZABLE - Philips OneBlade, Braun S9 Pro, Brio Beardscape

This Shaver Organizer Tray is designed to fit my Philips OneBlade, Braun S9 Pro, Brio Beardscape, Safety Razor, Shaving Brush, Alum Block, etc. You can customize it to fit your shavers and other grooming tools by editing the included easy…

Pobrania
491
Polubienia
119
Ocena
5
P
PrintablesEvofab Inc.

Wall Mount for Braun Beard Trimmer

Wall Mount for Braun Beard Trimmer designed by 4iqvmk on Thingiverse. Print instructions Body (PLA z-marble) Printed on a Original PRUSA MK3SMMU2S. Infill: 20% Support: No Filament temperature: 210 Bed temperature: 60 Print settings :…

Pobrania
411
Polubienia
41
Ocena
5
P
Printablesjwr

Braun Series 5 Stand

A stand for a Braun Series 5 shaver. Designed to be simple, with minimal footprint, and still hold the shaver securely and allow for easy one-handed removal. There is a hole in the bottom so that any water can flow out, but there are no…

Pobrania
372
Polubienia
32
Ocena
5
P
PrintablesShinobu Tezuka

Braun Clean and Renew Reusable Cartridge

Water tightness: Due to the viscosity of alcohol I cannot guarantee water tightness. Depending on the print quality the seal is spill resistant not water tight . Do not transport this while it contains any fluids. Place the fluid in a…

Pobrania
345
Polubienia
42
Ocena
5
P
PrintablesJan Franzke

Braun Series 3 holder

One version uses two countersink screws to mount, one uses double sided tape. Easy printing, no supports, no orientation changes.

Pobrania
331
Polubienia
34
Ocena
5
P
PrintablesOkojo

Braun 3 Shaver Holder

I designed this holder for my Braun shaver. It has a slot for the cleaning brush, a hole for the charging cable, and a way to store the excess cable for the charger inside. I only printed the v2 model. The hole for v2 was slightly too…

Pobrania
328
Polubienia
37
Ocena
4,25
P
PrintablesKunzite

Toothbrush Stand for Oral B Braun

Credits A remix of the great design from 3aDri - Oral B toothbrush stand Description The holder can hold an Oral B toothbrush and two heads to the side. Print settings (suggestions) Filament : Prusament Green PLA. Infill : From 10% up to…

Pobrania
301
Polubienia
31
Ocena
5
P
PrintablesOskaras Spalvys

Braun Oral-B Toothbrush head holder

I was setting up a nice toothbrushing station for my family and found that there weren't many nice options for a holder so I spent some time and designed this. It looks great and holds the toothbrush heads firmly in place. There even is a…

Pobrania
299
Polubienia
25
Ocena
5
P
PrintablesChristian Glodt

Protective Cover for Braun Series 9 Pro Shavers

The Braun Series 9 Pro shavers come without any protective covers for the blades. This model is a snap-on cover for the shaver that protects the blades, eg. when traveling. The holes on the top provide ventilation, in case the shaver is…

Pobrania
293
Polubienia
22
Ocena
5
P
PrintablesFliegenfisch

Braun Series 9 Stand

Nachdem es für den Braun Series 9 keinen einfachen Ständer gibt habe ich kurz einen passenden konstruiert. Gedruckt mit Prusament PLA 0,2mm Schicht und 15% Infill

Pobrania
285
Polubienia
31
Ocena
5
P
Printablesentirepotato

Braun Oral-B Electric Toothbrush Head Holder

Simple holder for electrical toothbrush heads, designed to fit Oral-B heads. The bottom has notches for 6.4mm x 1.9mm self adhesive protective bumbers. Included step file for own adjustments, such as using different notches at the bottom…

Pobrania
267
Polubienia
33
Ocena
5
P
PrintablesBlue_S

Braun Hair Clipper - Attachment comb 3-24mm / trimmer

This is a replacement comb attachment for Braun Hair Clippers. The model was specifically designed and tested for the product HC5010 . However, it should also be compatible with similar Braun models marked HC5090, HC5030, HC5310 and…

Pobrania
266
Polubienia
15
Ocena
5
P
PrintablesHoneyBadger

Braun K850 K1000 K3000 3210 63210652 Replacement Part

This is a repair Kit for Braun “Universalschüssel” fitting the machines K850 K1000 K3000 3210. To remove the broken part you can drill a small hole in its center and punch it out with a nail. To press in the new part, i added two parts…

Pobrania
260
Polubienia
10
Ocena
5
P
PrintablesJelly

Oral B / Braun / Philips electric tooth brush holder

Electric tooth brush holder, one for charging and the other for storage.

Pobrania
253
Polubienia
37
Ocena
4,8
P
PrintablesS1lent

Minimalist Oral-B Braun Electric Toothbrush Wall Mount Remix

I printed the Toothbrush wallmount before, but 1 of my pet peeves was the almost inability of keeping the print clean without having it to taken apart. I already keep my brush and my unit very clean, but there will always be some yellow…

Pobrania
251
Polubienia
37
Ocena
0
P
Printables5ch4b381

Braun Oral B Advance Power Battery Cover / Batterie Deckel Kappe

Update (10/02/2024): EN Water resistance was improved by reducing the inner diameter. During a test, some water did get under the cap, but only up to the rubber ring. The clips were lengthened slightly so that the closure holds better. DE…

Pobrania
244
Polubienia
12
Ocena
5
P
PrintablesCrapsy

Braun silk-épil 9 - long gear

This print provide the model to replace the long gear inside the Braun silk-épil 9 that gets worn out quickly. The print was performed on a Prusa Mini with a 0.4 nozzle, supposedly a 0.25 nozzle would be better for such a small size.…

Pobrania
243
Polubienia
12
Ocena
0
P
PrintablesFilip

Oral-B Braun Stand

Oral-B Braun toothbrush stand. There are two versions of the stand, one with space for a brush head and the other without. If you want to attach it to some surface, you can use double-sided tape or something else. Basic parameters:…

Pobrania
220
Polubienia
27
Ocena
5
P
Printablesmaxmar

Stands for Braun Razor/Trimmer/Groomer and Accessories (Ablagen für Braun Haarschneider und Zubehör)

Two stands for the Braun MKG5544 electrical razor/trimmer/groomer and its accessories. The accessory stand is for the different heads of the device. The stands might also work for similar models made by Braun. The accessory stand is…

Pobrania
196
Polubienia
27
Ocena
4,5
P
PrintablesDampmaskin

Braun Oral-B dual holder

A simple toothbrush holder. Print with plenty of walls, especially around the base of the protuberances, and at least a couple of 100% infill layers directly below them.

Pobrania
196
Polubienia
16
Ocena
5
P
Printablesgroove1604

cell phone tripod mount remixed for BRAUN quick release

Please first see the original model: https://www.printables.com/model/124924-3d-printable-cell-phone-tripod-mount I modified the file “stemv2” and made it fit to the BRAUN quick-release plates for the Lightweight line-up. (May also fit…

Pobrania
196
Polubienia
23
Ocena
5
P
PrintablesVauWeh

Braun Food processor K3000 K3210 Replacement Part (upper driver)

An der Rührschüssel der Braun Küchenmaschine K3000 gibt es einen oberen und unteren Mitnehmer. Wenn diese reißen, funktioniert der Antrieb nicht mehr. Ersatzteile sind leider nicht mehr erhältlich. Hier ist der obere Mitnehmer, den…

Pobrania
190
Polubienia
5
Ocena
0
P
PrintablesUli

Braun Series 9 Pro Rasierer Wandhalterung Reinigungsstation/Razor cleaning station wall mount

Ich benötigte eine Wandhaltung für meine Braun Reinigungsstation. Da ich die Kartusche nicht dauerhaft in der Reinigungsstation eingebaut habe, sollte diese außerdem über ein extra Fach dafür verfügen. Wer dies nicht mag, kann hier…

Pobrania
188
Polubienia
15
Ocena
5
P
PrintablesAwesomous_Prime

Braun 5514 trimmer attachment

This is a first draft of the Braun 5514 bear trimmer attachment. It fits pretty well but could use improvements. PLA works fine

Pobrania
187
Polubienia
15
Ocena
0

Braun Multiquick 7 tray

An accessories tray for Braun multiquick 7 (might be usable for 9-series aswell) This will store all your loose accessories for your multiquick 7 neatly together Printed with eSUN ABS+ the model is scaled for ABS

Pobrania
185
Polubienia
17
Ocena
5
P
PrintablesBSolo09

Raspberry Pi Microscope WIP -- (Remix of BraunsCNC's designs)

I really enjoyed this awesome design from BraunsCNC but I wanted to make some modifications for the Raspberry Pi 4 and less restriction on purchasing manufactured components vs. printing them. Unfortunately, this project doesn't have…

Pobrania
182
Polubienia
25
Ocena
0
P
Printablesrbid

Another Oral-B (Braun) Electric Toothbrush stand

1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. The original Orab-B Electric Toothbrush has a stand that is connected to the charger, something I do not like to be next to the washbasin (Water…

Pobrania
180
Polubienia
20
Ocena
5
P
PrintablesHasenpups

Alcohol Pads B. Braun Dispenser

I designed a box for the alcohol pads that I use to clean my print bed. Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 20%

Pobrania
178
Polubienia
21
Ocena
4,75
P
PrintablesCamperinho

Braun Hand blender coupling Type 4191

This coupling fits for the hand blender Type 4191 from Braun. It may be possible, that it fits for other hand blender's too. Category: Hand Tools

Pobrania
178
Polubienia
8
Ocena
0
P
PrintablesSELBSTgedruckt

Station for Braun Thermoscan Thermometer

Halterung für Ohr-Termometer Braun Thermoscan 6 und andere Modelle von Braun Zur Aufnahme des Thermometers und der Hygieneschutzhüllen. Gedruckt mit PLA 0,2mm Layer - 20% Infill

Pobrania
175
Polubienia
25
Ocena
5
P
PrintablesMostly Flawles

Braun Oral-B Electric toothbrush holder with detachable wall mount

Braun Oral-B Electric toothbrush holder with detachable wall mount, only one version for three toothbrushes. Printed in 0,16. For my setup I needed some sanding, but I also wanted it to be a snug fit so it won't detach by it self.…

Pobrania
172
Polubienia
18
Ocena
0
P
PrintablesVC Design

Braun Mixer Coupling 4191 Part. 67050811

Print in Petg or ABS. The black rubber O-ring is stock

Pobrania
159
Polubienia
30
Ocena
0
P
Printablesinnercube

Braun XT3/XT5 comb/Attachment size 4

I have a Braun XT3. It comes with attachments size 3 and 5. But I wanted something in between. So I created this model. It is not easy to print because of the fine details. I would recommend printing it in ABS for more rigidity. It worked…

Pobrania
152
Polubienia
5
Ocena
5
P
PrintablesPiJey

Shaver Stand for Braun Series 5

Motivation Since I got a new shaver, I needed some stand to have the shaver and accessories handy. Print settings Brand Prusa Model i3 MK3 Material PLA (Prusament Galaxy Black in my print). I guess, PETG would work just as well. Supports…

Pobrania
151
Polubienia
7
Ocena
0
P
PrintablesPérez

Soporte BRAUN series 5 y series 7

Tres bloques para poner cabezales BRAUN serie 5 all in one según conveniencia. No necesita soportes Preferiblemente PLA aunque puede ser de diferentes materiales No hace falta mucho relleno, con un 10/20% está bien ya que no va a…

Pobrania
143
Polubienia
23
Ocena
5
P
PrintablesJeremo Moore

Braun series 3 holder

Remixed version of https://www.printables.com/model/179360-braun-3-shaver-holder

Pobrania
140
Polubienia
17
Ocena
0
P
PrintablesGroni3D

Braun Trimmer Series 5 stand (BT5430)

Hi. On the left you can place your trimmer. In the middle is place for your small attechments. And on the right you have place for attechment (size 1-10).

Pobrania
139
Polubienia
17
Ocena
5
P
PrintablesMax Ølsted

Screw Scrubber with Braun toothbrushes

Remix of Super Screw Scrubber: A Sensational Solution for Sparkling Screws (Powered by AI) to be used with Braun toot brushes. Used brushes works nice and saves money.

Pobrania
138
Polubienia
19
Ocena
5
P
Printablesnetpaq

Braun ThermoScan and lens filters storage box

The box is designed to hold: Braun thermometer. 60 lens filters out of their boxes or 2 boxes of 20 filters (40). The finger notch can be used to store the lens protector when permanently keeping a lens filter on the thermometer. I…

Pobrania
137
Polubienia
16
Ocena
0
P
Printableslehmi

Braun Oral B stand

no support needed, printed with 20% infill

Pobrania
135
Polubienia
14
Ocena
5
P

figurka Grzegorza Brauna

należy dodać podpory

Pobrania
133
Polubienia
7
Ocena
1
P
PrintablesErik

Braun Series 9 Beard trimmer tray/holder

A tray where you can put both the charger and the accessories to your Braun Series 9 beard trimmer. It has a place for the charger; with a groove for the charging cable. Also two stands for the blades, and a tray for the other…

Pobrania
132
Polubienia
18
Ocena
0
P

Shaver Stand for Braun S5 Electric Razor

Print on its side, tree supports worked well. Finished with a clear lacquer to seal and avoid water ingress.

Pobrania
123
Polubienia
13
Ocena
0
P
Printablesturbotimex

Braun 5500 Lumen LED Light Mounting Bracket

This is a direct ceiling mounting bracket for the Braun 5500 Lumen LED light bar from Harbor Freight. As my workshop is a basement with 8ft ceilings, hanging these lights from the included chains was undesirable. These brackets fit over…

Pobrania
119
Polubienia
12
Ocena
0
P
Printablesrbelnienk182

Braun Electrical Toothbrush Holder Bathroom (No Screw)

Holder for your Braun electrical Toothbrush. Mount to your bathroom wall with double sided Tape.

Pobrania
118
Polubienia
14
Ocena
5
P
PrintablesJaroslav Klaus

Braun BT7040 Trimmer adapter - 5 cm

WIP: It sort of fits the trimmer but is untested as to how long the beard is after trimming! Trimmer adapter (5 cm) for Braun BT7040 Print instructions Category: Bathroom Summary WIP: It sort of fits the trimmer but is untested as to how…

Pobrania
116
Polubienia
7
Ocena
0
P
PrintablesBeo666

Oral B iO Professional 3 - 5 Zahnbürste Braun

Suchst du eine effiziente Möglichkeit deine Zahnbürstenaufsätze im Bad zu organisieren? Dann bist du hier genau richtig. Bis zu 3 (oder wenn man Nähe nicht scheut, sogar 5) Aufsteckzahnbürsten für Oral B können in meiner Halterung…

Pobrania
114
Polubienia
15
Ocena
0
P
Printableshorrovac

Braun silk épil 5 epilator wall mount

If you want to use glue to attach the mount to the wall, print the appropriate model and use a construction type glue (like Pattex no more nails/Pattex kleben statt bohren), or some bathroom silicon. If you are gluing it to tiles, clean…

Pobrania
112
Polubienia
10
Ocena
4,6
P
Printablesa123qwertz567

Knife coupling for Braun hand blender type 4191 750-1000W

A friend of mine lost the coupling gear for her Braun hand blender spinning knife. So I created a new one. I suggest printing it in FDA approved PET-G. I had to use PLA because it was the only material with FDA rating I had. With PLA it…

Pobrania
112
Polubienia
12
Ocena
4
P
PrintablesBrom

Braun Multiquick Hand Blender Part Optimized for Prusa i3 MK3S

I remixed the original gear and optimized it for my Prusa i3 MK3S printer. I tweaked the physical size of the hole in the bottom of the gear. This fits nice and snug on my blender. The original part came off too easily. I have also…

Pobrania
112
Polubienia
10
Ocena
0
P
PrintablesDarkK3y

Braun EasyClick Organizer - Series 5, 6 & 7 Model 2020

Looking for a Quick and Easy Organizer for your Braun Attachments... Here you go =) This is my first real design I decided to share. I was trying to buy an Organizer for my Braun EasyClick Attachments, but there is noting to buy. So I…

Pobrania
110
Polubienia
16
Ocena
5
P
PrintablesSilent331

Oral-B Braun Electric Toothbrush and Charger Wall Mount

This is a wall mount for the Oral-B Braun electric toothbrush and charger. I printed it in matte white PLA and it is holding up very well. The fit on the chargers is pretty snug so they dont come out when lifting the tooth brushes. It has…

Pobrania
107
Polubienia
18
Ocena
5
P
PrintablesHorscht1810

Braun 5542 BT7240 25mm extra Aufsatz Bart Trimmer Rasierer

!!!Achtung Trimmer lässt sich nur noch um 5mm verstellen!!!

Pobrania
105
Polubienia
9
Ocena
0
P
Printablesdjk96

Braun ThermoScan 3 Box

Storage bock for fever thermometer and single use tip protectors. Glued in magnets.

Pobrania
105
Polubienia
16
Ocena
0
P
PrintablesMicroComa

Braun hand-blender holder

218mm x 96mm 3 holes (2 x 56mm, 1 x 49mm)

Pobrania
104
Polubienia
13
Ocena
5
P
Printablesholla2040

Eastwood PC Gun - Braun LED Pen Light Mount

Spray booth too dark? Add a $7 light weight pencil flashlight to your Eastwood gun. Click mounting, no screws, holds securely and very nice. Angle adjusted for 12" away from spray target. Print with PETG, no supports, no brim, 15% infill.…

Pobrania
103
Polubienia
8
Ocena
0
P
PrintablesK1000r

Braun Alarm Clock

A digital replica of my Braun Alarm Clock. Category: Scans & Replicas

Pobrania
98
Polubienia
31
Ocena
0
P
PrintablesPeter Henriksen

Kobling/Clutch for Braun Blender type 4126

Printed in Eryone PETG Gray, print with supports 50% infill. fits 100%.

Pobrania
98
Polubienia
11
Ocena
5
P
Printablesedi1000

Braun ThermoScan 3

This model is printable without supports. Attached is a .step file to modify.

Pobrania
97
Polubienia
9
Ocena
5

Braun Oral B - Replacement brushes holder

The connectable boxes are VERY tight so they will stay together when put together.

Pobrania
96
Polubienia
13
Ocena
5
P
PrintablesUenbzsto

Wall Mount for Braun Beard Trimmer

Wall mount for Braun beard trimmer. The trimmer I have is a BT5065, but there are others of the same form factor that look like they will fit. I used #8 x 1.25 inch flat head screws and drywall anchors to mount it to the wall. Similar…

Pobrania
95
Polubienia
4
Ocena
0
P
PrintablesLenbok

Braun Stick Mixer Coupling 4191

The mechanical coupling between the motor and attachment on our Braun stick mixer broke. A replacement part seems to be available on ebay, but it works out at a large fraction of the price of the mixer! My hopes were raised when I saw…

Pobrania
95
Polubienia
7
Ocena
5
P
Printablesm1rk00

Braun Beard Trimmer Docking Station

I didn't know how to store this trimmer in my bathroom, so I designed this docking station; I printed mine in PLA 1 year ago.

Pobrania
94
Polubienia
17
Ocena
5
P
PrintablesBitmag

Braun blender axial connection

Braun blender axial connection. No supports needed.

Pobrania
94
Polubienia
11
Ocena
0
P
PrintablesSpam Filter

Braun Oral B Toothbrush Stand

Braun Oral B Toothbrush Stand for dual electric toothbrushes, 6 brush heads and a small basket for toothpicks etc.. Since it's modular you can bring it with you on travels. Tried some toothbrush stands and found them lacking so i designed…

Pobrania
94
Polubienia
18
Ocena
5
P
Printablesspazzatura

Braun blender coupling, model 4179

Replacement coupling for braun blender 4179

Pobrania
93
Polubienia
5
Ocena
0
P
PrintablesJoachimVdG

Braun Oral-B Kids Toothbrush Mount

Dual mount for your Oral B Toothbrush. Designed around the kids version of the electric toothbrush. Easy storage on the sink. Print instructions Infill of 15% is enough. Print with a resolution of 0.2 Use PETG for water resistance

Pobrania
90
Polubienia
4
Ocena
3
P
PrintablesHarold Sullivan

Harbor Freight Braun Shop Light Mounts

Revamped version of the "A" and "B" light mounts for larger mounting screws. The originals seem to be designed for mounting screws along the lines of a #4 wood or sheet metal screw, which I simply don't have with sufficient length to…

Pobrania
90
Polubienia
14
Ocena
0
P
PrintablesIkeBerlin

Braun Shaver Holder

Printed with Prusa PETG Galaxy Black and sized it to 105%.

Pobrania
89
Polubienia
26
Ocena
5
P
PrintablesJSMPF

Braun Series 7 blade cover

Series 7 blade cover for travel

Pobrania
87
Polubienia
1
Ocena
5
P
PrintablesGroon

Toothbrush stand for BRAUN ORAL-B Pulsonic brush tips

I made a holder for pulsonic toothbrush tips, since standing them on end and knocking them over all the time got old really fast. STLs are ready in single, double, and triple versions. Prints best when oriented flat on its back, Settings…

Pobrania
87
Polubienia
5
Ocena
5
P
Printableskgerritzen Zz

Braun Series 3 Comb Organizer (300BT)

This is a shaving comb organizer for the Braun S3 (Model: 300BT) that i made a few years ago. It fits all five combs at once. The comb attachments are snapped into the organizer the same way they do into the shaver itself. The print does…

Pobrania
86
Polubienia
13
Ocena
5
P
Printablesshicks101

Braun blender coupler

Replacement coupler for Braun blender. Fusion file included if it needs to be modified. printed with 5 perimetrs (solid) for strength. Category: Kitchen & Dining

Pobrania
85
Polubienia
7
Ocena
0
P
PrintablesBMdesign

Braun KSM 1 coffee grinder replacement lid

A replacement lid for the Braun KSM 1 coffee grinder which was sold in the 70s and 80s. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Prusa PETG Clear Notes: The parts…

Pobrania
85
Polubienia
2
Ocena
0
P
PrintablesSimon Dietzel

Braun Trimmer S3 Holder/ Stand/ Display

Braun S3 Shaver Storage Solution This 3D model is specifically designed for storing the Braun S3 shaver and its accessories. It provides ample space for the shaver, the cleaning brush, and the matching travel case. The thoughtful…

Pobrania
84
Polubienia
4
Ocena
0
P
PrintablesSina Boluki

braun hl70 desk fan

Retro-style desk fan model allows you to extend the blades and hub based on your motor's power and volume. Ensure that the blades do not touch the casing, and feel free to use glue ! :)

Pobrania
84
Polubienia
42
Ocena
0

Braun (Harbor Freight) 5500 4ft LED Shop Light - 45° Mounting Bracket

This mounting system is for the newest version of Harbor Freight's Braun 5500 lumen 4ft. Linkable LED shop light. I don't like having the light directly in my eyes when working on my printers, so offsetting them by 45° helps cut down on…

Pobrania
82
Polubienia
18
Ocena
0

Braun trimmer stand

Stand for Braun trimmers and it's accessories. Trimmer slides in into corresponding slot. I position model top surface on the plate, so it gets texture. Slot for trimmer is printed with supports (however, you may try to use bridges).…

Pobrania
81
Polubienia
22
Ocena
0
P
Printablescpayne3d

1970/80's Braun Juicer Basket

About the Design The Braun juicer made in the 1970's and 80's was built so well that it still runs today. A coworker brought this to my attention that he still owns one of these juicers. The basket started to crumble so it was time to…

Pobrania
81
Polubienia
4
Ocena
5
P
Printablesopenscan

Historical Cathedral - Braunschweiger Dom - Germany

Created with photogrammetry (freeware: VisualSFM + Cloudcompare + Blender + Meshmixer) When you are interested in Lowest Budget 3D Scanning, you might also like: https://www.thingiverse.com/thing:2755968 Check out my other collections of…

Pobrania
80
Polubienia
15
Ocena
0
P
Printablesgpgg

Stand for Braun hand blender - rounded corners (Type: HB701 ActiveBlade)

This is a remix of the "Stand for Braun hand blender (Type: HB701 ActiveBlade)" with rounded corners. It's more aesthetically pleasing (in my opinion) and the base uses less space. Holds the blender super well.

Pobrania
79
Polubienia
7
Ocena
0
P
PrintablesSteffen

Braunvieh (Alpine Cow) Cookie Cutter

Created this model for a friend from the alps to make her feel more at home. Sadly the legs are not always working out with this cutter, so feel free to mix around with the STEP file or scale it up a little bit before printing.

Pobrania
78
Polubienia
7
Ocena
0
P
Printablesrainshine

Braun Oral-B 4 Toothbrush Holder

Modified the original and made the holes larger to accommodate third-party brushes, which can be slightly larger. Now the original brushes didn't stand up straight, so I added the middle pins. I also smoothed out the edges and added a…

Pobrania
78
Polubienia
4
Ocena
0
P
PrintablesGrzegorz
Pobrania
76
Polubienia
7
Ocena
5
P
Printablesmechanical0815

Shaver holder for Braun Series 5

Printing Material doesn't matter, I printed in PETG which is more flexible. Nozzle 0.4 mm, layer height 0.2 mm, no brim (if adhesion is good), 2 wall lines, infill 7% is enough. Use double-sided adhesive tape to attach it somewhere in the…

Pobrania
73
Polubienia
2
Ocena
0
P
PrintablesPunkt Sieben

Yet another Braun Oral B IO 6 stand

I was looking for a stand that covers 2 brush holder, 2 stands w/o charging and 1 charging spot for IO series 6. printed in ASA white edges are rounded or have a phase (whenever possible). back portion of the charging station requires…

Pobrania
73
Polubienia
7
Ocena
5
P
PrintablesMedimann

Braun Series XT5 Rasierer Ständer

Hi, das ist ein Ständer für den Braun XT5 Rasierer. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Filament: REDLINE PLA Elfenbein weiß Category: Bathroom

Pobrania
73
Polubienia
11
Ocena
5
P
Printablesnkh

IKEA Braunit battery adapter

This forms the basis for an adapter that can be plugged in as a replacement for the original battery. You need to add and route your own cables/connectors which depent on where you want them to exit the adapter (and where you want to put…

Pobrania
72
Polubienia
11
Ocena
0
P
PrintablesHalbur4754

Braun Rechargeable LED Light Hinge

I didn't bother to include the line-up grooves that join the mating surfaces on the original part for ease of printability in the orientation I chose. (Laying flat on mating surfaces.) I used PETG and all went well, though others may be…

Pobrania
72
Polubienia
5
Ocena
0
P
PrintablesShred

Braun Juicer 4161 switch spring

This is a replacement for the Braun Juicer 4161 switch spring (part #81262218). The original part got some fatigue cracks over the years. I was unable to obtain an original spare part, but I didn't want to throw away a good juicer, so I…

Pobrania
72
Polubienia
4
Ocena
0
P
Printablesfloano

Stand for Braun Multiquick 3 (4192) hand held mixer

The shaft clicks in place. Simple to print without supports.

Pobrania
69
Polubienia
9
Ocena
0
P
PrintablesLasse

Braun series 9 beard trimmer shaving heads stand

holder for the shaving heads of the Braun series 9 beard trimmer

Pobrania
68
Polubienia
7
Ocena
0
P
PrintablesSica

Universal Electric Toothbrush Wall Holder – Philips Sonicare / Oral-B / Braun, no supports, single part

This is a universal wall-mounted electric toothbrush holder designed to fit round and oval electric toothbrush handles . Compatible with most models from: Philips Sonicare Oral-B Braun Other electric toothbrushes with similar cylindrical…

Pobrania
68
Polubienia
1
Ocena
0