57 modeli
Stojan na pistoli zásobníky a náboje pro CZ 75. / Stand for pistol, magazines and bullets for CZ 75 Materiál / Materials: PLA+, PETG Tisknuto na / Printer: Kingroon KP3s Adheze na ploše / Rafts: No Podpory / Supports: No Rozlišení /…
Wydruk około 7,52 €–9,20 € nettoWstępna wycena jednego wariantu
Spring Gun V2 - Shoots fake bullets with magazine Spring gun v2 can fire multiple bullets one at a time thanks to the new magazine system. Reading the comments and advice from users, I designed version 2 of the spring gun. The new version…
Spring Gun - Shoots fake bullets and poop Single-piece printed spring gun that shoots fake bullets and poop, fast, easy to print and a lot of fun to use. I had to make several attempts to find the right ratio of spring length to spring…
It’s a verry good model and simple all you haft to do is put the bullets in the top piece slide it on and shoot
Inspired by basicweech , thank you! I'd seen bullet roller d6s, so I wanted to 3d print my own, and provide a spinning fidget case. I printed the dice in resin, and the case in FDM - but you could likely print both with either. Feel free…
These are 3D-printed 9mm Parabellum scale replicas. The bullets screws into the casing so they can be printed different colors and don't need glue to be assembled. I design full metal jacket, hollow point, and frangible bullets that all…
Foldable Spring Gun Shoots fake bullets and is foldable for easy transportation. Instructions after printing: take the gun from the sides and break the mini supports inside the joint so it can be released.
These models were made with dimensions found on Wikipedia, and are intended for prop usage. It is not recommended to load them. Add color with a height-based material change, or with the cut tool Additional cartridge types available by…
For the reenactors among us who need to fill a belt or bandoleer, this is the perfect solution. If you made one please let me know :) If you have suggestions to improve the design add it in the comments. Have fun printing!
Bullet for my 1:2 scale Good Samaritan. https://www.printables.com/it/model/178112-good-samaritan-hellboy-gun-scale-12 Update: 04/05/2022 -add new bullet type (Granade Bullet, Hunting bullet, Holy Bullet) -Separate parts for painting it…
M41A Bullet scaled to fit the M41A Pulse Rifle Model
series of bullets. 9mm, 556 and so on. 1 to 1 ratio. Have fun :)
These are bullets that can be used in Bang! The Dice Game and/or Bang! . They are divided into two parts to make it easier to print them in different colors. Update I added versions of the casing that has a "primer" on them, making them…
TPU/PLA Bullets (8x30mm) without MMU/glue! | REMIX for Glock 19 "working toy gun" G19 note: There are 4 DIFFERENT VERSIONS of the bullet (8x30mm) , see in the picture below! Select the preferred size of the tip & bullet to match them!…
This is a bullet tray and bullet for the Bang the Dice game. I love the game and thought I'd spiff it up a bit by adding realistic looking bullets and a bullet tray to hold them. Print instructions I printed this using my Prusa MK3 with…
Iconic Movie Moments - Neo Dodging Bullets in Bullet Time - 1999
Who Framed Roger Rabbit film Six Bullet Category: Other
****Important***** models are not scaled to any particular caliber and are quite larger than actual bullets. scaling is required to suit your needs.
This is ‘belt’ of bullets that goes well with the mini-gun for dummy 13. The size of the bullets is 200% of the standard size, so you may wish to downsize for a standard size Dummy 13 model.
I designed these for my mom after she lost one of her original ones. I used a ballistic chronograph to compare to the originals and was unable to see any difference in performance. Printing notes: The casing is printed in PETG, and the…
m1911 colt pistol bullets and clips
This is a bullet for Andew Forseter's Blade Runner Blaster: https://www.myminifactory.com/object/3d-print-deckards-blaster-blade-runner-5694 Each barrel fits 5 bullets.
I cleaned up the slide from CJay9209's https://www.thingiverse.com/thing:2521321 I also added sights :D Category: 3D Printing
Small sphere bullets for Nerf Rival blasters, recommended to print in TPU (or PLA if you really want to. Then, make sure you wear safety gear).
Fallout Guns and bullets -plasma Mag Lithophane
Six-round revolver cylinder as 45 Record Adapters
.22LR/Mag cylinder case with bullets Category: 3D Printing
Factory seating stem was leaving a ring from the interface between bullet and seating stem, so I modeled this seating stem with the profile of the X-treme bullet for the Hornady Seating Die. I printed at .12 layer height, 95% infill, and…
My remix of Shadow 2 model for AceXR.
Not perfect, but does the job. If I would print it again, I would raise the border of the base an bit. Now the lid snags sometimes and it's pretty tight fit First upload, let me know if you need something
You can easily print multiple from your slicers.
The types of bullets are, 22 short, 25 acp, 380 auto, 40 s&w, 9mm, 10mm, 45 acp, 17 Hmr, 22 Magnum, 7.5 burno, 357 magnum, 38 special, 50 AE, 44 magnum, 30 carbine, 22 hornet, 500 magnum, 458 socom.
English/Nederlands! 3D blowpipe with bullets and holder! Short video Also check out my youtube channel and support me by subscribing and possibly watching! www.youtube.com/@ElektroTechNL…
only the bullets from by bb gun toy
I made this remix really quick to fit it on a HSS (Humbucker, Singlecoil, Singlecoil) classic Fender stratocaster (or Squier).
Always check where the notch is on the rail and try to match it with the bump inside the accessory. PRINT WITH BRIM IF PRINTING VERTICALLY
Just some garden plant markers.
The stock Lee seating die deforms Hornady's FTX 357 bullets, as they have a softer nose. This die forms around that nose and reduces the deformation. It's been a while since I used this, but, if I remember right, I disassembled the die…
Print them out in different colors and keep them in a jar. You can shoot them without breaking the gun's seal. At 5 meters, they fly in a tight group. I've attached a SolidWorks file for editing the caliber. The default caliber is 5.5.
i had a confetti six shooter and it was boring so i made these they work really well there are two types, a flat bullet and a pointy one, i made the flat one first to see how it would shoot they are slightly smaller than the barrel so…
Bullets engraved with deny, defend, depose for pnzr's G26 shell ejecting blowback replica
The stock Lee seating die deforms Hornady's FTX 357 bullets, as they have a softer nose. This die forms around that nose and reduces the deformation. It's been a while since I used this, but, if I remember right, I disassembled the die…
Always check where the notch is on the rail and try to match it with the bump inside the accessory. PRINT WITH BRIM IF PRINTING VERTICALLY
Print them out in different colors and keep them in a jar. You can shoot them without breaking the gun's seal. At 5 meters, they fly in a tight group. I've attached a SolidWorks file for editing the caliber. The default caliber is 5.5.
These are 3D-printed 9mm Parabellum scale replicas. The bullets screws into the casing so they can be printed different colors and don't need glue to be assembled. I design full metal jacket, hollow point, and frangible bullets that all…
This is a mirror of my original upload on Thingiverse. This is a scale model of Axl's Double Bullet weapon from Rockman X7. It is made to scale with Kotobukiya's Axl model kit. It is a single piece print. Print two of them to complete the…
Print them out in different colors and keep them in a jar. You can shoot them without breaking the gun's seal. At 5 meters, they fly in a tight group. I've attached a SolidWorks file for editing the caliber. The default caliber is 5.5.
