Wyniki wyszukiwania: busbar

Sortowanie

Liczymy pasujące modele…

P
Printablesps915

Eve LiFePo4 LF304 busbar cover (nkon.nl)

Printed out of PETG, 0.2mm layer height. Clicks in it's place over the busbar. Balancing wires will go out at the sides you can feed multiple balance wires through the covers to simplify the wiring. Fits these busbars:…

Pobrania
506
Polubienia
55
Ocena
0
P
PrintablesMats E

Busbar

A frame to hold a copper bar acting as a busbar for high current connections at 12/24 volts. Print Settings Rafts: No Supports: No Infill: 35% Filament: addNorth PETG Category: Electronics

Pobrania
459
Polubienia
30
Ocena
5
P
Printablessmuk3d

Busbar cover for Eve LF280K Prismatic 280Ah Flex Bus Bar (one fits all)

for me it fits for all bars. so no need to print different ones, and that makes the asselmby much more easier ;-) it has also som gap in the construction that it fits thin isolator and also thicker ones .. see pics ^^

Pobrania
407
Polubienia
35
Ocena
5

Busbar cover for Eve LF280K Prismatic 280Ah

This is an easy to print cover for busbars to avoid shorts. It covers all metallic surfaces. clicks onto the busbar It has a slot for voltage taps (L and R version have slightly different location) Has space for 2 mm insulation between…

Pobrania
319
Polubienia
31
Ocena
4
P
Printablesexciler

ANL Fuse and Busbar Holder

I designed a custom busbar an fuse holder using ANL fuses for my Victron ESS system. You can print as many as you like an snap them together, just add a 40x5mm copper bar on top with M8 bolts.

Pobrania
290
Polubienia
45
Ocena
5
P
PrintablesRudolf Mašek

Busbar with a cover

Parts needed 9x M8 screws 9x M8 nuts 130x20 mm copper sheet Assembly manual Cut a copper sheet to a 130x20 mm strip. Drill 7 8mm holes into it. Place it into the holder and secure it with 7 M8 screws. The cover is also secured with M8…

Pobrania
275
Polubienia
17
Ocena
0
P
PrintablesTim

Busbar Cover (EVE 280ah, Envision 305Ah)

I had some issues with the original model from AuroraProjects, the covers didn't want to snap to the bus bars, and some of them cracked on the outer walls. I replicated the original design from the STL in onshape, with the follwing…

Pobrania
236
Polubienia
18
Ocena
0
P
Printablesexciler

Modular Busbar Holder

I designed a custom busbar holder for my Victron ESS system without fuses for the negative terminal. Just add a 40x5mm copper bar and use M8 bolts/nuts. You can find a variant with ANL fuseholder for positive terminal in my profile as well.

Pobrania
228
Polubienia
26
Ocena
5

Eve LF304 LiFePO4 cell busbar cover

Printed out of PETG, 0.2mm layer height. Clicks in it's place over the busbar and sits snug. It has small slot at the both sides for the balancing wire. Designed using busbars that came with my batteries from nkon.nl.

Pobrania
210
Polubienia
12
Ocena
4

Triple DC Busbar

Good quality busbars can be quite expensive, and most of them are of bad quality or completely unsafe. I made this one of a 20mm wide, 3mm thick copper flat bar, but you could go thicker if you have a need for it. Mine is for summing 2…

Pobrania
180
Polubienia
28
Ocena
0
P
PrintablesAndreas

Victron Lynx Power In Busbar Cover

This is a cover for the positive and negative busbar of the Victron Energy Lynx Power In 1000. The cover simply clips on top of the busbar, a small stretcher prevents it from sliding off when mounted in vertical direction. Preferably…

Pobrania
160
Polubienia
10
Ocena
0
P
PrintablesMorris Lazootin

EVE 280Ah LiFePO4 Terminal Busbar Covers

Covers the busbar (and the nuts!) to reduce the chance of a short circuit. Available in 2x and 4x cell configuration. Friction fits on 11.2mm nuts - this allows clearance on any BMS wires/attachments. No supports required - designed to be…

Pobrania
159
Polubienia
21
Ocena
4
P
PrintablesKévin Dhondt

Cache dent / protection de peigne électrique - Cap for busbar

Possibilité de faire bouger la taille dans Cura pour adapter au peigne.

Pobrania
142
Polubienia
5
Ocena
0
P
PrintablesNoiseLab

LiFePO4 Terminal / Busbar Cover, Strengthened & Improved

This is a quick remix of a terminal cover set for most 280-310Ah LiFePO4 Prismatic Cells. The original files for the busbars were well designed but unfortunately quite weak and so would consistently split apart when I tried to snap them…

Pobrania
121
Polubienia
4
Ocena
0
P
PrintablesParagon

Osłony Terminali Busbar Ogniw LiFePo4 280Ah

Do pobrania Projekt Osłon na terminale Busbary ogniw LFP 280Ah. Osłony zapobiegają przypadkowemu zwarciu, dodatkowo chronią terminale przed uszkodzeniem: Materiały ze składania magazynu na tej obudowie: - Jeżeli chciałbyś zapoznać się z…

Pobrania
115
Polubienia
9
Ocena
5
P
PrintablesAran J.J.

Busbar protector 20x90 LiFePo4

Busbar protector made around tipical 20x90mm for 280Ah LiFePo4. Depending on your printer, aditional supports recommended on the holes. Any material. Mines are tested and produced with PLA+

Pobrania
105
Polubienia
14
Ocena
5
P
PrintablesParagon

Osłony Terminali Busbar Ogniw LiFePo4 280Ah - V3

Do pobrania Projekt Osłon na terminale Busbary ogniw LFP 280Ah. Osłony zapobiegają przypadkowemu zwarciu, dodatkowo chronią terminale przed uszkodzeniem, dedykowane pod busbary elestyczne. Materiały ze składania magazynu na tej obudowie:…

Pobrania
90
Polubienia
14
Ocena
0
P
PrintablesTomHC

Prismatic LiFePO4 batteries M6 terminal/busbar cover

PETG should be used as non-flammable or less-flammable material. 15% infill is enough.

Pobrania
78
Polubienia
5
Ocena
5
P
PrintablesParagon

Osłony Terminali Busbar Ogniw LiFePo4 280Ah - V2

Do pobrania Projekt Osłon na terminale Busbary ogniw LFP 280Ah. Osłony zapobiegają przypadkowemu zwarciu, dodatkowo chronią terminale przed uszkodzeniem, dedykowane pod busbary elestyczne. Materiały ze składania magazynu na tej obudowie:…

Pobrania
70
Polubienia
7
Ocena
0
P
PrintablesSamPhoenix

Phase Busbar Touch Protection/Phasenschiene Berührungsschutz

🇩🇪 Deutsch Phasenschienen-Berührungsschutz (Schneider kompatibel) Dieser 3D-gedruckte Berührungsschutz für Phasenschienenkontakte wurde für Schneider Electric Phasenschienen entwickelt und kann auch mit baugleichen Phasenschienen anderer…

Pobrania
46
Polubienia
6
Ocena
0
P
PrintablesMarKiss

LiFePO4 MB31 cuprum busbar cover

Busbar cover for cuprum busbars. Typically sold on nkon.nl, but can be found on Aliexpress and Temu also.

Pobrania
46
Polubienia
6
Ocena
0

Eve LF304 LiFePO4 prismatic cell busbar

Original Eve busbar for LF304

Pobrania
44
Polubienia
4
Ocena
0
P
PrintablesParagon

Battery Busbars Aluminum Milling + Print 3D

Do pobrania mój projekt szyny zbiorczej dla baterii / magazynu energii, w zestawie wszystkie pliki potrzebne do wykonania projektu, jak wiadomo element oznaczony jako aluminium musimy wyfrezować na z aluminium na frezarce CNC :) .. Jest…

Pobrania
44
Polubienia
3
Ocena
0
P
Printablessmuk3d

Minus Pol Block Solar PV Akku LiPoFe M6 Busbar

Die sonst schon vorhanden Modelle im Netz erlauben es nicht das ankommende Kabel in die gleiche Richtung auszurichten wie das abgehende Kabel

Pobrania
41
Polubienia
4
Ocena
0
P
Printablesjedanson

Yinlong 66160 45ah LTO Cell Busbar

Learning to 3d model scale items. This is a model of the busbar for a Yinlong 66160 LTO 45ah Cell.

Pobrania
39
Polubienia
2
Ocena
0
P
PrintablesJR

Sammelschiene v2 12/24V mit Abdeckung - Busbar 12/24V with Cover

Sammelschiene für 12/24V Systeme Update V2 Der Träger wurde überarbeitet, die Schraubenköpfe haben jetzt Kontakt zur Kupferschiene. Die Heat Inserts wurden durch M4 Muttern ersetzt. Die Kupferschiene wir durch 2x M4 Schraube am Träger…

Pobrania
38
Polubienia
1
Ocena
0
P
PrintablesParagon

Better ESS Busbar Terminal Covers Diy Box 280Ah

Download Project Shield for Busbars terminals LFP 280Ah. Shields prevent accidental short-circuit, additionally protect terminals from damage: Materials from the assembly: ----------------------------------------------- - Facebook Group:…

Pobrania
34
Polubienia
2
Ocena
0

Victron Lynx Power In Busbar Cover With Side Opening

This is a remix of original model here https://www.printables.com/model/892072-victron-lynx-power-in-busbar-cover

Pobrania
34
Polubienia
4
Ocena
0
P
PrintablesAl

EVE LF280K Battery terminal and busbar covers

Printed in 0,2mm PETG. The terminal covers are with an hole for temperature sensors and an cable-tie attachment. The busbar are just to click on and slide together. All tight fit for car use.

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesNiels

Fuse and Busbar holder

I printed this at 0.6mm with a 0.8 nozzle in PETG, but your mileage may vary. Please do electrical wiring on your own risk and don't burn down your boat. I have used M5X6X7 knurled heat inserts from here: https://amzn.to/3voRAKV Busbars:…

Pobrania
19
Polubienia
7
Ocena
0
P
PrintablesDamian Breza

Busbar cover lifepo4

Just slide it on busbar.

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesRickB190

Busbar cap Victron Lynx Distributor and Power-In

Cover to be used in addition to the silicon covers provided by Victron. I was looking for a more finished look compared to the ends of the busbar just sticking out. The cover can be screwed to the backboard with a 4x30mm screw.

Pobrania
17
Polubienia
7
Ocena
0
P
Printablesnyz

Meanwell SP-200 series busbar cover with AC-14-F16A switch

Meanwell SP-200 series busbar cover with cutout for a AC-14-F16A power switch

Pobrania
16
Polubienia
0
Ocena
0
P
PrintablespoundCake

DIN Rail Busbar (2x8)

Mounting plate designed to hold two 2x8 busbars vertically on a DIN rail using clip.

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesJordi

Busbar Form

Make your own aluminium Busbars with this form. Cut a stripe, insert, press, fold, press & fold until desired thickness. Printed in PLA, 100% infill, 0,2 layer height. Holes are for weird 4mm studs that came on Oyestore Aliexpress…

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesShopie

Busbar 2p fork cover

Print: on its side. good result with PLA 0,2mm layer height Disclaimer: This is not an original Schneider part. This model is provided with no warranties express or implied. When using it, you are doing so at your own discretion and risk.

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesStepDoku

Comb Busbard End Caps

This is safety part of electrical and electronic wiring for a Comb Busbar to protect the ends of cut busbars from being touched accidentally in a live panel. This was made for a 2P busbar and fits snug.

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesShopie

Busbar 3p fork cover

Print: on its side. good result with PLA 0,2mm layer height Disclaimer: This is not an original FTG part. This model is provided with no warranties express or implied. When using it, you are doing so at your own discretion and risk.

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesxF4m3

Eve LiFePo4 LF304 busbar cover - Without nkon.nl Logo

Printed out of ASA with shrinkage compensated, 0.2mm layer height. Clicks in it's place over the busbar. Compatible with with: Eve LiFePo4 LF304 Terminal Cover Eve LiFePo4 LF304 Wirebox

Pobrania
9
Polubienia
0
Ocena
5
P
Printablesjackbauer

Jaguar IPace Battery Module Busbar

Simple busbar for connecting JLR IPace battery modules together in an EV Conversion or other project. A 3D print car be used as a drilling / cutting template or use the included DXF files with a CNC plasma or other automated process. I'm…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesGabrielawf

busbar lamp connector

busbar lamp connector, rail extension, so-called I

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesWebcae.com

Inverter Busbar Assembly — STEP CAD | WebCAE

Engineering STEP model by WebCAE for analysis and visualization. AI-assisted CAD design. Model files are provided in STEP format under CC BY 4.0.

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

Busbar cover lifepo4

Just slide it on busbar.

P
Printables

Phase Busbar Touch Protection/Phasenschiene Berührungsschutz

🇩🇪 Deutsch Phasenschienen-Berührungsschutz (Schneider kompatibel) Dieser 3D-gedruckte Berührungsschutz für Phasenschienenkontakte wurde für Schneider Electric Phasenschienen entwickelt und kann auch mit baugleichen Phasenschienen anderer…

P
Printables

busbar lamp connector

busbar lamp connector, rail extension, so-called I

P
Printables

LiFePO4 MB31 cuprum busbar cover

Busbar cover for cuprum busbars. Typically sold on nkon.nl, but can be found on Aliexpress and Temu also.

P
Printables

EVE LF280K Battery terminal and busbar covers

Printed in 0,2mm PETG. The terminal covers are with an hole for temperature sensors and an cable-tie attachment. The busbar are just to click on and slide together. All tight fit for car use.

P
Printables

Comb Busbard End Caps

This is safety part of electrical and electronic wiring for a Comb Busbar to protect the ends of cut busbars from being touched accidentally in a live panel. This was made for a 2P busbar and fits snug.

P
Printables

Busbar 3p fork cover

Print: on its side. good result with PLA 0,2mm layer height Disclaimer: This is not an original FTG part. This model is provided with no warranties express or implied. When using it, you are doing so at your own discretion and risk.

P
Printables

Busbar 2p fork cover

Print: on its side. good result with PLA 0,2mm layer height Disclaimer: This is not an original Schneider part. This model is provided with no warranties express or implied. When using it, you are doing so at your own discretion and risk.

P
Printables

Osłony Terminali Busbar Ogniw LiFePo4 280Ah

Do pobrania Projekt Osłon na terminale Busbary ogniw LFP 280Ah. Osłony zapobiegają przypadkowemu zwarciu, dodatkowo chronią terminale przed uszkodzeniem: Materiały ze składania magazynu na tej obudowie: - Jeżeli chciałbyś zapoznać się z…