3890 modeli
VW Bus Pen Holder with Accessories for someone who wants to decorate and organize his desk! HowToPrint : - Recommended Layer Height: 0,2mm ( 0,1mm / 0,05 for Logo & Lights) - Support: No - Infill: 20-25 % - PLA / PETG works fine. -…
This remix of my original Flat Pack Mini Box is customizable within PrusaSlicer and has the following features: Stores 9 Lucky 13 hands in sockets UPDATE: alternate version for 9 Mini 13 hands on ball posts Stores two original Lucky 13…
0.5mm extrusion width, No infill, 2 perimeters, side plates 100% infill M4x20 or M4x25 hardware, recommend wingnuts or 8-32 imperial All files have been test print on a MK3s+/CR10s printed in PETG. If there's a piece missing shoot me a…
With these holders, you can neatly store your Dyson accessories. Update: Added STL Files
Like, print and share! Dyson accessory holder for wall mounting. Compatible with Dyson V7-V11. V15 (verified by user) reversible, works with front release mechanism or facing the wall. works with simple and motorized accessories different…
Dyson V11/V10/V8/V7 Accessory Mount/Holder Additional double holder for Dyson accessories as wall mounting. This mount has only been tested with the V10, but it should also work with the V7, V8 and V11. This is a remix (original is from…
Due to a lot of flooding, mosquitos seem to have thrived recently. To both take less space in your gear and make it more accessible, this clip allows you to mount your Thermacell mosquito repellent on a backpack, bag or belt! The design…
I've been looking at Monitor Mounts for a while but just couldn't find one I liked at a decent cost. I printed these on The Original Prusa i3 MK3S with the MMU2. I attempted to provide my Gcode but the site does not allow for my nozzle…
With these accessories, you can uleash your creativity and create endless layouts to attach on your PC. You can personalize it and turn your PC into a work of art. In case you have any suggestions on how to make a certain part fit better,…
My daughter wanted some hand sanitizer for her 1:12 dolls, so I made her it. Printed in white PLA at 0.12mm layer height. For me, it was hard to get off of the “BuildTak” sheet that came with my Creality Ender 3, so I printed with a raft.…
This an Accessory Rail for the Ryobi Link Lockable Tool Organizer Cabinet, Speed Bench, etc. The accessory doesn’t appear available in the U.S. on its own, so I modeled my own. It prints well at 0.3 layer height without any supports. I…
Mounts: These mounts were designed for Mead® White Board 85356 to allow the board to be quickly removed from the wall without tools (post installation). The mounts work by allowing the board to sit on the Bottom Mounts and swiveling the…
Inspired by Michael Brill 's Kenwood Chef Blade Holder , I wanted to attempt to build my own version and take the opportunity to experiment/learn more of OpenSCAD. The first blade counting from the left is facing a different way from the…
31/12/24: Adding the exhaust pipe. This goes with my UNIMOG RC Chassis . For the exhaust you need to remove the battery shelf and then screw x2 from inside the chassis. The Ad-blue tank includes the bracket for the steps and has also 2…
Wall mounted storage for Dyson accessories. The angled mount allows the storage of tools that do not fit on many vertical mounts. New version v30: Larger screw holes as per popular demand(4.5mm with 8.7mm countersink) Slightly larger…
EDIT 20210127 Added Holders for Flush cutters, Pliers that come with Prusa Printers and IPA-Spray bottle holder. Also found out that all parts can be printed without supports :) EDIT 20210120 Now works with the IKEA Skadis System Since I…
Print on the side, I used PLA and 50% infill and it is strong enough to open a bottle cap. Use the V2 for a stronger opener, not as compact
An adapter to use Dyson V8 and later accessories with an older Dyson V6 vacuum cleaner. I printed the final part with a 4mm nozzle, 0.10mm DETAIL profile in Prusa Slicer, just because I wanted a nice, clean finish. All the prototypes were…
HEADS UP: A new version compatible with LowRider v4 is now available. Get it here . Here's a helpful video I made about this: This is an adaptation of a Maxwell Kinematic coupling . You can read about that here:…
While the original clip is designed to be quick-access and multi-purpose, this variant was made to fit more securely onto the straps of most backpacks. The integrated hook and slight ramp makes it a lot harder to accidentally bump off,…
Cute cat along with accessories for the dollhouse. No supports.
I have a few pieces of test equipment in my lab that utilize the common BNC type connector. The problem is that the connectors, when unused, are commonly left unprotected. Enter 3D printing. This little cap slips on and then twists to…
Simple device to hold T-Track accessories. Should be easily printable by most printers. Print instructions Category: Hobby Summary Simple device to hold T-Track accessories. Should be easily printable by most printers. Print Settings…
We bought a DYSON V12 Absolute as new vacuum cleaner. Since there are so many accessories in this set, it is quite complicated to organize them in our small cleaning cabinet. Since space is limited, I wanted to use single holders to have…
This is a board to hold the pieces for the board game Hey, That's My Fish. It's a fun game and good for kids, but it lacks a piece to hold the pieces in formation. That's where this board comes in. There are three main differentiating…
Two stands for the Braun MKG5544 electrical razor/trimmer/groomer and its accessories. The accessory stand is for the different heads of the device. The stands might also work for similar models made by Braun. The accessory stand is…
I love to play Klask with the family but when the game is left unattended, things can get misplaced or outright lost (I'm talking to you white magnets!). To solve this problem, I designed a box where you can store all the accessories…
This is a tool holder for Xiaomi G10 accessories. I think it will also fit for older versions but I did not test it. Its a two part design. You have to screw the wall mount to the wall with two screws. Then clip in the utility holder.…
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
An organizer for 6 Kenwood food processor cutting disks. Print instructions Check-out the width of the slots for the disks you need to store and adapt them in the fusion 360 model. Print top surface on the bed. No support needed.
Hey there, Here I have some removable shopping cart chips. Just insert them proberly and remove 'em after your cart is freed from the chain. The initials on the blue one are customizable (Fusion 360), therefore donwload the .f3d document.…
Add a touch of medieval flair to your table with this chainmail-inspired cup coaster! The flexible interlocking design protects your surfaces from hot mugs and glasses while looking absolutely unique. Perfect for fantasy fans or anyone…
This is an accessory for the XRP robotics kit, that allows it to draw! Just easily attach a pen/marker and the robot becomes able to draw. I would not recommend you to use a pencil as it wears down with use. It is pretty small (only 2.6cm…
A compact box to hold all the components of the basic kit with your insta 360 GO 3S purchase. the lid is loose, but inside a backpack secure enough to protect the contents. Depending on my time or inspiration, I will implement the…
It fits on this bin: https://www.printables.com/de/model/526044-prusa-mk4-bin
The side sections of a Leatherman are useful to hold additional tools such as saw blades, a pen or the bit extender but I always found they would fall out. So, I designed this simple holder with just enough clearance for the blades and…
The button that keeps the bristle part locked when using the Dyson combination accessory tool broke and the bristle part wouldn't stay in place. I found a replacement part online but it didn't look right so I recreated the broken button…
These holders for the most essential 3D printing tools allow you to efficiently mount your gear onto a Skadis-style system, either directly on the printer or next to it. For mounting specifically on the Core One, you can use this model.…
Dyson accessory holder for wall mounting. Compatible with Dyson V7-V11. V15 (verified by me) reversible, works with front release mechanism or facing the wall. works with simple and motorized accessories Do not over-tighten the mounting…
Fork for stringing rubber bands Loom Bands
WATCH IN ACTION: https://youtu.be/DJhv8JvJUME WHY: This was made to be able to touch objects such as buttons or electronic screens that might have been in contact with bacteria or viruses such as COVID-19. With research such as…
Note: The reservoir funnel is designed for one-directional use. The circular part goes into the water reservoir in the back of the WaterPik and the rectangle is supposed to fit onto the head of a sink. Although it is specially designed…
I have orderd on amazon a set of Darts for my electronic dart board: https://www.amazon.de/-/en/dp/B08FDXSFC8?psc=1&ref=ppx_yo2ov_dt_b_product_details As the tips and additional parts didn't come in a handy storage box, I designed this…
This model is used for traditional Pegboard with 1 inch (2.54 centimeters) seperation between holes. The model covers a total of 16 holes, 8x2. It is very useful to hold anything with a snaping style hook on the back meant to attach to…
This design was indented as a Pen Stand/Pen holder for my collection of Uni Pin Fine Line Pens but the holes were too tight for the pen but it worked for other pens, dry markers and felts. V5 Hi-techpoint 0.5 fitted nicely, as did some of…
Zubehör für FoxAlien Masuter Pro CNC. Vakuum Halterung, Knopfhalterung, Gebläsehalterung (Potentiometer) für 20 mm Nutprofil welches auf der Front genutzt wird. Cnc Zubehör. Verwendet von mir: Knopf: GeKLok 5 Stück KCD11 10 mm x 15 mm…
Box to store label printer (Brother P-Touch) cartridges and power brick.
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
This is a two-piece tray system for the Prusa XL, designed to work with the OEM enclosure. I printed it in PLA with 15% infill. I understand the tools people use may vary person-to-person, but hopefully it works for someone.
An insert for a hardcase to keep your Insta360 Luna Ultra and accessories safe. The hardcase should measure 25 x 17,5 x 9,5cm ( like this one ). It is possible to print it in three parts. You have to print 1. An outside skirt to put in…
I made this to mount a travel router to my telescope rig.
support mural pour accessoires de l'aspirateur balai Ryobi, parti solo, double, support de charge, tout est indépendant les uns des autres ou peuvent être combiné selon ses besoins. pour info: Si vous souhaitez le même rendu (vert & gris)…
This compact oval organizer is designed to keep your sink area neat while maximizing space efficiency. The layout combines two functional sections in one seamless footprint. Cylindrical compartment — 70 mm inner diameter, perfect for…
Dyson accessories adapter for vacuum cleaners on Severin vacuum cleaners
This is a 3D-printable pig nose , designed specifically to fit Bunchems (the small spiky balls that stick together). The nose features a simple snap-fit design that presses gently into Bunchems without glue , making it reusable and easy…
Box for handgun cleaning accessories and others!
Shoei Gen3 GoPro vertical Clip-Mount for right side Helmet Accessories Connector. Print-in-place. Generation 3 Helmets are: Neotec3, GT-Air3, J-Cruise3…
We recently bought a new vacuum for our home and I missed the holder for the accessories. So i designed a simple clip for them, which can be sticked to a flat surface with some douple sided tape. Thats it :-)
This is a kit of accessories you can use when installing a Locinox lock. This is compatible with LAKQ & LAKZ models. Each accessory can be printed independently. You can also review my related model Locinox LAKQ & LAKZ Installation Jigs .…
Stuart from Minions is joining the Nothing family! Inspired by Stuart in black suit . Note: This model was printed with 0.6 nozzle, which is the only one I have, but it should also work with 0.4 nozzle. I had access to grey PETG, yellow…
Simple to print cute Blåhaj accessories for different occasions and functions! Be it accessories for your outfit or to use in your home. All of these can be printed with no supports and with varying layer heights. Only thing needed are a…
These are 3D-printable narrow eyes , designed specifically to fit Bunchems (the small spiky balls that stick together). The eyes have a simple, round and narrow design , intended as a clean and minimal alternative to larger eye models.…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
The original parts are prone to breakage, esp. the PG ones.
These are a selection of phone accessories that use my UTQD system. Just unclip the accessory to use Magsafe freely. The .stl and .step files are included for easy modification. Check out the first phone case compatible with UTQD for an…
These are 3D-printable horns , designed specifically to fit Bunchems (the small spiky balls that stick together). The horns feature a simple snap-fit design that presses gently into Bunchems without glue , making them reusable and easy to…
These are 3D-printable hearts , designed specifically to fit Bunchems (the small spiky balls that stick together). The hearts feature a simple snap-fit design that presses gently into Bunchems without glue , making them reusable and easy…
Kužely a cílový box pro sphero robot mini golf. Cones and Finish Box for Sphero Robot Mini Golf
The PCS-10 line of Park Tool Repair Stands have a collar with “receiver pods” to hold the 106 Repair Stand Work Tray. The work tray also has "receiver pods" to hold tray accessories, but they are spaced more closely together than on the…
セリアのクーラーボックス型小物入れを２階建にするスノコをつくってみました。少し改造すると写真のようにイエティ風ウェッティケースになります。（ウェッティケースのアイデアはYouTubeで発見したものです）*for Japanese only
Print settings: ------------- Temperature:200.C Bed Temperature:50.C Print Speed:125mm/S Support:ON Infill:80% Infill Pattern:Cube
Shoei Gen3 GoPro horizontal Clip-Mount for right side Helmet Accessories Connector. Print-in-place. Generation 3 Helmets are: Neotec3, GT-Air3, J-Cruise3 Vertical Version:…
Bracket to use Syncros accessories with PRO saddles. Every Syncros accessory mounts perfectly and holds strong. Originally it was designed for PRO Stealth saddle, but should fit every other PRO saddle. Printing settings: Filament: PETG,…
Diglett from pokemon quest I spray painted the nose and base and printed the singlet and the white and black parts each color separate in file other then those spray painted.
My Cecotec Conga Rockstar 1500 Ray Pure came with a furniture brush and a crevice tool, and that's it. This adapter goes between its hand-tool fitting and a standard 32 mm accessory kit, so you can use a proper soft dusting brush. Both…
Kept fumbling for the four tools I pretty much use every time I sit down at my Cobra Class 26 with accessory table. This was designed for the attached table and would need adjusted for stand table.
This is a small accessory pack for Dummy 13 ( Version 1.0 / Beta ) These accessories were designed alongside Dummy 13 by the original creator. Consider this a nice starter set before jumping into the hundreds of community remixes! This…
Support the designer: Please consider following me if you download and print my work. It’s a simple way to support my activity and stay connected with me in the future. Your interest helps me understand the value of my work to the…
IKEA skadis/SKÅDIS accessories PACK This is my skådis accessories, hooks and holders. I use dual pegs because I want the hooks and holders to sit firmly on the pegboard and don't move around when I take a tool. I have separated the peg…
Description Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and addons 5 perimeters to screw and head of…
Description These models are made to enhance your Prusa USS Drybox experience, bringing additional compatibility and expanding the range of options. Before you start, read the article, which contains all the important info. What can you…
This is a set of parts I made to re-enforce the 3M adhesive used to mount Govee Permanent Outdoor Lights Pro (H706A). Light Mount : A small frame that goes around the outside of a light that can be screwed to the mounting surface to…
The model holds all the accessories. It's available in 4 variants. I would recommand printing the variant that uses the integrated screws. This is due to the weight of all the accessories. Model has been updated with better holes for the…
Some Requires supports please join my discussions group https://www.printables.com/group/kaleb08-upcoming-models-oQJxrGR
I have created a set of accessories that will help you organize and improve your workflow. All stl models that contain the "festool" logo have the logo incorporated, which can be divided into parts for multicolor use, or split into…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…
Description: I loved the cat ghost that ncsandor made, so remixed it with a hollow body that should be big enough for a tealight. I also created a channel on the side to fit the wires for other lights. Printing: I printed my example with…
Assorted pegboard accessories. Made to fit http://www.biltema.se/sv/Verktyg/Arbetsbank-och-forvaring/Verktygstavla-och-hallare/Verktygstavla-2000022183/ but probably fits most pegboards. I've succesfully printed most of these without…
Summary This is a 1:24 scale model of a waste bin / trash can in a kit card style. Versions The complete sets are available in a 3MF file for a one-color print. There are 3MF-files with predefined colors intended for users of AMS or MMU.…
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials recommended: PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: smooth Technical information for TM…
Tired of your drink tipping over while you're zooming down the sidewalk, weaving through traffic, or just trying to enjoy a cold one on your ride? Meet the Gyroscopic Can Holder. Designed for 22mm handlebars (bikes, scooters, strollers,…
xBloom Studio storage for xBloom Filters, omni dripper 2, and xPod Dock. I was looking for a compact storage solution for all my xBloom attachments. I wanted it to be able to mount to the machine itself as I was using a rolling base and…
For M5 C Click Here Update 4/17/2023: v0.04, uniformalized all the drawings. I've also added more tolerance to the magnet pockets from 2mm to 2.20mm Update 4/11/2023: v0.03, Modified height dimensions to accommodate ThisFact's M5 Build…
This adapter is designed to hold all the accessories that came with the Dyson V11 vacuum in a small space envelope. A smaller version is also available. Accessories do not obstruct each other and can be accessed freely and easily.…
Source / Attribution: These are remixed from https://www.thingiverse.com/thing:2860289 . I wanted to clean up the F3D file so I could follow it and create some additional mounts. Having done that, it makes sense to release my updates back…
A Multipart Pinecil Case remix that is a bit taller (+5.2mm) with a different set of cutouts and accessories allowing a full set of spare tips to be stored. The dimensions have been change to allow clearance for a 2nd tip mount which…
I wanted a place to store Lucky 13 and his extra hands and accessories so I whipped this up. Probably could use some tweaking but it holds 12 hands, has a place for his hat, and can hold a number of accessories on the back of the lid.
Found a ribbon for the wreath and sized it to fit in the wreath model. Sliced to print and glue to avoid supports.
