Wyniki wyszukiwania: chisels

Sortowanie

42 modeli

P
PrintablesLU_technic

WOOD CHISELS HOLDER STANLEY BAILEY

Wood chisels holder for Stanley Bailey chisels

Pobrania
99
Polubienia
12
Ocena
0
P
PrintablesJohnMartin

Honing Guide for Chisels and Plane Irons No Bearings and Less Moreness

Low profile chisel and plane iron honing guide. No bearings are required. Assembly Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way.…

Pobrania
2247
Polubienia
1118
Ocena
4,71
P
PrintablesBoss_Hoss990

Knife Sharpener (+ Scissors and Chisels) - Chonk Edition

After using the “Leading Edge” system for a bit, I identified several improvements and features that I thought would improve ease of use and overall outcome; the platform felt too flimsy for me, and the old style threaded inserts were too…

Pobrania
415
Polubienia
276
Ocena
5
P
PrintablesJohnMartin

Honing Guide for Chisels and Plane Irons

This experiment was to see if I could make a mechanism that securely held chisels and plane irons without too much flex. It works well, but shorter chisels like the Dewalt one in the photos won't do much more than a micro bevel because…

Pobrania
384
Polubienia
128
Ocena
5
P
PrintablesSebastianDruckt

Best sharpening / honing jig for chisels, knifes, planers below 20 bucks

I always failed in correctly sharpening my chisels, so i thought of a method to always sharpen correctly without spending > 100 bucks for veritas tool. I came up with this solution. You need: Diamond Stone / Wetstone I took the SHARPAL…

Pobrania
321
Polubienia
235
Ocena
5
P
PrintablesBarras 3D

Sorby Proedge drill guides and chisels

Print as per the 3mf file Text upwards and you should not need any supports Take them off the print bed and remove any burrs Then get a tealight candle and remove it from the tin and rub it over the bottom of the guide to make it slide…

Pobrania
254
Polubienia
27
Ocena
5
P
Printablesandrewwillis

Pegboard holder for Narex chisels

This is a pegboard holder for the standard Narex chisel set .

Pobrania
206
Polubienia
13
Ocena
5
P
PrintablesChris_300m

Holder for Narex chisels (Honeycomb storage wall)

This is a holder for the standard Narex chisel set ( 8630-10 + 8631-10)

Pobrania
193
Polubienia
41
Ocena
5
P

Irwin Chisels Holder

I designed this as a wall mounting bracket to hold a set of 4 Irwin brand chisels. I have it set up on a French Cleat wall but it can be mounted directly to a wall or onto a tool cabinet or table. This is one of many shop tool holders I…

Pobrania
117
Polubienia
30
Ocena
5
P
PrintablesKx

Sharpening Jig for Chisels and plane irons

Jig for sharpening of chisels, plane irons and similar. Print instructions: Material: PETG (PA, PC might be a good fit too) Layer height: 0.2 (0.15 should work fine too) Baseplate: Infill: 15% - 20% Honeycomb Perimeter: 3 Top: Infill: 70%…

Pobrania
115
Polubienia
31
Ocena
0
P

Chisel Racks for Narex and Marples chisels

One rack pair holds a set of three Marples chisels, the second rack pair holds a set of four Narex chisels. See the video here: https://youtu.be/ztdbiVzUNpE

Pobrania
114
Polubienia
19
Ocena
0
P
Printablesyandre

Gridfinity holder for Stanley chisels

A gridfinity holder for 3 Stanley chisels (½"/13mm, ¾"/19mm and 1"/25mm). Fits in a 6x2 gridfinity slot and slim enough for a tool chest.

Pobrania
104
Polubienia
9
Ocena
0
P
PrintablesGunplaMark

Gridfinity Holder for Scribing Chisels

A 1x1 gridfinity block that holds 4 scribing chisels, of the BMC/SAB style with their standard plastic handles.

Pobrania
81
Polubienia
10
Ocena
0
P
Printablessprior

Wall holder for Narex Richter chisels set of 4

I designed this wall holder for my Narex Richter chisels by measuring and modeling the chisels themselves and then subtracting them from a holder body. They model the taper and don't rest on the leather they sit entirely on the metal with…

Pobrania
78
Polubienia
12
Ocena
0
P
Printablescrashkg

Angle Setter for Chisels and Plane Blades

This a parametric model of a Angle Setting Block for chisels and plane blades. It is important to have consistent bevels on your blades and this setup block keeps your angles correct every time. Just line up the chisel or plane blade with…

Pobrania
71
Polubienia
14
Ocena
0
P
Printableszrlevin

Narex Richter chisels wall mount

This simple bracket holds the chisel by the ferrule at the base of the handle, with the beveled top edge catching the handle where it begins to flare out. This should prevent any plastic corners from contacting the chisel and causing…

Pobrania
54
Polubienia
4
Ocena
5
P
PrintablesKrystek

Stand for turning chisels

Hanger for turning chisels in two sizes

Pobrania
52
Polubienia
7
Ocena
0
P

Ikea Skadis Lettering Chisels S.76 / Drills SDS-Plus

Supported brands: Rexid Wezid Europ Shank shape: 10,2x36 mm (S.76)

Pobrania
47
Polubienia
11
Ocena
0
P

Jorgensen Chisels Holder

A newer better version is available: https://www.printables.com/model/469632-chisel-holder-jorgensen I designed this as a wall mounting bracket to hold a set of 3 Jorgensen brand chisels. I have it set up on a French Cleat wall but it can…

Pobrania
46
Polubienia
10
Ocena
0
P
Printablesluma

Hand Guard and Handles for Imperial Hex-Shank Punches and Chisels

This collection of models provides hand guards and handles for tools like cold chisels, pin punches, center punches, etc that have hexagonal shanks in imperial dimensions. They are designed for printing with TPU and have no overhangs nor…

Pobrania
43
Polubienia
10
Ocena
5
P
PrintablesDon English

Pegboard Shelf for Chisels

I had a set of chisels that needed a home on my pegboard so I designed this. I printed it with no top or bottom layers and a honeycomb infill. Fits 1" pigboards.

Pobrania
36
Polubienia
7
Ocena
0
P
Printablesjphalip

Protector caps for Stanley chisels 150 Series

Protectors for Stanley chisels 150 Series (1/2", 3/4", and 1-1/4"). Inspired from the protectors that come with the Sweetheart series. I recommend printing in PETG for flexibility and strength. Link to the chisels (affiliate link):…

Pobrania
33
Polubienia
3
Ocena
5
P
PrintablesLokiDM

Chisels wall holder / Držák dlát

Chisels wall holder. Držák dlát na nářaďovou stěnu.

Pobrania
30
Polubienia
5
Ocena
0
P
PrintablesMK

protection for woodturning chisels Holzmann 6 pieces

A quick design of protective caps for my newly purchased woodturning chisel set 6 pieces from Holzmann. As I'm a bloody beginner in woodturning, this is not a statement on the quality of these tools or that you should buy them. Fits well…

Pobrania
22
Polubienia
4
Ocena
0

Template for sharpening lathe chisels.

Template for sharpening lathe chisels. Used to adjust the distance between the guide bar and the grinding wheel. For example, for a Tormek grinder.

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesPrusaUser113

Case for hooked lathe chisels/Gehäuse für Haken-Drehmeisel

This is a case for all of my hooked lathe chisels. Das ist ein Gehäuse für alle meine Haken-Drehmeißel. Fits for/Passend für HOLEX 297145 16 HOLEX 297120 12 HOLEX 297120 10 HOLEX 297120 8 HOLEX 297120 6

Pobrania
18
Polubienia
1
Ocena
0
P

Ikea Skadis Drills / Chisels SDS-Max

Ikea Skadis Drills / Chisels SDS-Max

Pobrania
17
Polubienia
3
Ocena
0

A DIN rail mounting bracket to hold chisels, pliers, scissors, and other such things

A DIN rail mounting bracket to hold chisels, pliers, scissors, and other such things. You will need to print two tabs for the bracket. They can be found at: They can be found at: https://www.thingiverse.com/thing:3401942 or…

Pobrania
17
Polubienia
3
Ocena
0
P
Printablesverthh

Sharpening guide for tapered skew chisels

Sharpening guide for tapered skew chisels I do love my 30mm tapered skew chisel! For it to be easily sharpened on the Robert Sorby Proedge I designed two simple blocks. I found an angle of 57° to be correct with my chisel. Print whatever…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesWade Potts

5mm Kemovan Leather Chisels Skadis

Not the most efficient use of plastic but its solid and stands on a workbench and stays on a skadis wall

Pobrania
16
Polubienia
4
Ocena
0
P
PrintablesMike

Gridfinity 3x3 tray for lathe tools and chisels

A tray on top of atucoms flat adapter in 3x3 to store chisels and the required tools to exchange them. For reference these are mostly 10x10mm chisel holders.

Pobrania
16
Polubienia
3
Ocena
0
P
Printablesdbozec

mini-chisels stand

A gridfinity stand for my mini-chisels, the handle and the allen key

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesMosswildsMade

Honing Guide for Chisels and Planes (AmazonBasics)

Created this for the honing guide that came as part of an Amazon Basics Chisel Kit which had the following angles documented: Chisels: 30 degrees - 30mm 25 degrees - 40mm Planes: 30 degrees - 38mm 25 degrees - 50mm Adding the F3D with…

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesAle Rampage

Workshop Tool Holder – Screwdrivers, Chisels & Tools

The holder features multiple 10 mm diameter holes with a 25 mm center-to-center spacing, along with a 6 mm wide slot for storing additional tools or accessories. Perfect for organizing your workbench, workshop, garage or DIY workspace.…

Pobrania
10
Polubienia
6
Ocena
0
P
PrintablesСергей

profile for editing semicircular chisels

profile for editing semicircular chisels

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesMichael Buch

Organizer for (5) Set of Stanley Bailey Chisels

Simple organizer to keep those chisels from banging around. I separated into to (2) models so it can fit on my build plate. They should snap together fine. Please see my other models if you're interested.…

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesCarstenMT

Honing Guide Adapter for Chisels

When using a chisel honing guide for hand engravers the chisels don't fit very well and tend to tilt. With this adapter they fit tightly. The adapter can be modified to the engraver blades measurements in the Freecad File.

Pobrania
7
Polubienia
2
Ocena
0
P
PrintablesArthur Both

Chisel Edge Guards - Six Slip-On Caps for 6 to 25 mm Chisels, No Supports (OpenSCAD)

Slip-on caps that protect the cutting edges of your chisels in the tool roll, drawer or box, and protect your fingers from them. Six sizes for the common 6, 10, 12, 16, 20 and 25 mm chisels, each marked with its size; change the sizes and…

Pobrania
5
Polubienia
2
Ocena
0
P
PrintablesDavid Liss

Pod for a two inch hole to hold woodturning chisels

This item is for drilling a 2 inch hole into a board and holding multiple size chisels for woodturning enthusiasts.

Pobrania
4
Polubienia
0
Ocena
0
P
Printables

Pod for a two inch hole to hold woodturning chisels

This item is for drilling a 2 inch hole into a board and holding multiple size chisels for woodturning enthusiasts.

P
Printables

Template for sharpening lathe chisels.

Template for sharpening lathe chisels. Used to adjust the distance between the guide bar and the grinding wheel. For example, for a Tormek grinder.

P
Printables

Honing Guide for Chisels and Planes (AmazonBasics)

Created this for the honing guide that came as part of an Amazon Basics Chisel Kit which had the following angles documented: Chisels: 30 degrees - 30mm 25 degrees - 40mm Planes: 30 degrees - 38mm 25 degrees - 50mm Adding the F3D with…