Nintendo Switch Gamestand - Vitrinenschuber
Easy to print Switch game stand for 11 Games. No Support needed!
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 440
- Polubienia
- 90
- Ocena
- 5
49 modeli
Easy to print Switch game stand for 11 Games. No Support needed!
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This simple fix stiffens up the visor mechanism on early Schuberth C5s and S3s. However, the mechanism has been redesigned and can be fixed by your importer, so I'd recommend you have that done. If for some reason you can't, this is a lot…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Schuberth S3 GoPro Mount I have designed this mount because none of the standard GoPro attachments didn't fit my helmet. I 3D-scanned the helmet to fit the curvature around the chin vent. It is attached with 3M VHB tape cut to shape. It…
My Schuberth C5 came with a Schuberth SC2 Sena compatible bluetooth kit mounting slot, but I already own a Cardo Edge bluetooth kit and I want it installed properly. As an engineer and owner of a 3D printer I did the most sensible thing…
Chube is the greatest and latest hotend in the 3d printing market, featuring a staggering 42mm of meltzone! Chubes packaging doesn't just help create a massive meltzone; it also has a lot of rigidity thanks to the shroud design. These…
Replacement Schuberth C3 Pro Motorcycle Helmet Sun Visor Slide. Printed with PETG. Please share your Make:) Like the freebie? Please Rate and share your Make 😎
3D scan of composer Franz Schubert, created by noe-3d.at under license CC Attribution . The original can be found on: https://skfb.ly/6ZTZI The statue is also a remix: i have divided the statue and integrated a hidden storage (secret…
I refused to buy the Sena SC2 Intercom. I already bought a Sena 60S and want to use it with my new Schuberth E2. So I did the only sensibel thing and printed my own. It uses the exzellent Schuberth SC2 replacement Cover from guidosenff .
Dekoratives Logo
If you read mangas on the go and want to protect your reading material, this could be the solution. For me it is. You can use a rubber band to secure your manga. There are diffent varaints for: Crunchyroll (formerly Kaze) Kaiju No 8 Black…
This is an export of the Schuberth SC2 cover part that I modeled and used in the Schuberth SC2 Sena mount to Cardo Edge converter. You can use it as alternative cover plate or to create your own mount adapters.
Made a small mount for my Schubert C5 helmet, I wanted to make it as sleek as possible and I saw that the front vent had a shape inside so I measured it and created this. The other end is for a curved gopro helmet mount and I attached…
The published Chube Integration model leaves a lot to be desired. This is a reverse engineer of the Chube using the published integration model from the Chube folks as a base. Everything is determined from publicly available pictures,…
Franz Schubert – Bust This bust is a sculptural interpretation of Franz Schubert , one of the most important composers of the early Romantic era. It was created based on his most famous portrait , aiming to faithfully preserve his…
Print the mold using supports on the one overhanging face. Use this rim for some small clamps while casting. Bill of materials Printed parts 2x M3x12 BHCS/SHCS Two component silicone for instance Trollfactory High Temp Silicone if you're…
Updates: 12-NOV-2025: added m3 and m3 heatset versions of the front face, to help our poor IS graphs with a third mounting point for the fan cages. Standard voron-style short heatsets, 4.22mm holes for 4.5mm inserts. For the final public…
Finally, a way to run a Chube Air on your otherwise stock RatRig V-Core 3.1! Requires a new metal toolhead plate and Chube Air (with heater and thermistor). These are available from Luke's Laboratory:…
This is alpha at the moment! I have a few of the plates ordered through PCBWay - once I install this on my VCore, I will adjust the model as needed and post an update here. Update 01/15/2025 : Beta now. It is being tested and tweaked by…
Hi this is a mount adapter for the Shubert helmet C3 may fit other helmets too, just try. Printed mine in ASA
Used this version of chin mount for the whole season and had no issue (printed with Creality Hyper ABS but I will change to ASA for the next version). Had absolutely no issues with speeds up to ~200 km/h (~124 mph) on a naked bike. I've…
Integrate the Chube Compact with your Calamity and CPAP setup! CPAP setup currently only works with the LGX Lite Pro. CAD is included if you want to undertake updating the CPAP interface to allow more clearance. General I personally find…
Use this to integrate your new Luke's Lab Chube Compact with your Dragon Burner V8 setup. Supports Top rails only at the moment. You just need to new hotend adapter and the spacers, everything else can be reused! Print with standard Voron…
Print with 0.08 layer height enable supports under clips only.
Replacement chin ventilation button for the Schuberth C5 motorcycle helmet. Designed to be a tight snap fit and NOT toggleable. Great if you lose yours or if you just don't like that this button is so easy to accidentally toggle. I've…
I've broken the thumb tabs on my Schuberth E1 sun peak twice. Schuberth does not sell this part, so you have to purchase a new sun peak to fix the issue, which costs about $100. I decided to model the lock ring in FreeCAD, and it works…
Gedruckt mi Prusa Mk3 mit 0,6mm Düse, 100% Infill, Stützen and PETG. Printed on a Prusa Mk3 with a 0.6mm nozzle, 100% infill, supports and PETG.
Printable version of my Chube Conduction model. Some liberties taken - the main block is extended at the heater area and the thermistor is skooched up to avoid overhangs. Little nubs help the flathead screws print. F3D model:…
Slightly extended oozeguard for the Ratrig Vcore4 to allow for the extended length of the Chube Air nozzle. You will need to remove the wipers for these to fit when the bed is all of the way up and the printer is all of the way at Y=0 You…
Franz Schubert Bust is a historical warrior or soldier figurine STL made for 3d printing, featuring a display-ready bust sculpted for collectors, wargaming, and tabletop dioramas. Use it to build a historical figure collection, enhance a…
This duct was designed with an intention to keep a low profile for non-planar ironing, without suffocating the airflow path. With the moderate angle shape, any Beacon3d formfactor should have no issues settling in. SLM shields are…
The chin section of the Schuberth C5 can be locked. If the chin section is pressed down with force while it is locked, it will break. Use a Torx T10 to unscrew the screw on the left side of the helmet. Use a Tox T8 to unscrew the four…
With this mount in combination with the Schuberth flashlight mount and a M8 x 25 grub screw you can use the mounting points on the Schuberth F300 firefighting helmet to mount your Gopro.
As described, this is a remix that I needed to make the inner noses and brackets more stable. As the wider parts of the cutouts are on the opposite sides, they might theoretically hold without glue, but decide for yourself if you want to…
This remixes the top plate so a Chube from Luke's Laboratory can be used. Haven't printed yet, so any feedback is welcomed.
⚠ Important: This model was not originally designed for FDM printing . However, it has been successfully printed and used in real operation – this is the exact solution I run on my own machine. The design prioritizes rigidity and…
not tested use on your own!!
Modified version of Ratrig V3.1 LGX mount to be compatible with the Chube Ratrig plate.
Schuber mit Einsatz für ein Fach in einem Schrank; oder irgend etwas anderem. Länge 310 mm, Breite 120 mm, Höhe gesamt 110 mm. ...................... Slipcase with insert for a compartment in a cabinet; or anything else. Length 310 mm,…
Schuber für ein Fach in einem Schrank oder Regal; oder irgend etwas anderem Länge 310 mm, drei verschiedene Breiten und Höhen. ............. Slipcase for a compartment in a cabinet or regal; or anything else. Length 310 mm, three…
If you read mangas on the go and want to protect your reading material, this could be the solution. For me it is. You can use a rubber band to secure your manga. There are diffent varaints, just look into the descriptions. More will be…
I had to remix BakedBean3D's mount to work with the wrist watch G2 extruder I am using.
Schuberth S3 GoPro Mount I have designed this mount because none of the standard GoPro attachments didn't fit my helmet. I 3D-scanned the helmet to fit the curvature around the chin vent. It is attached with 3M VHB tape cut to shape. It…
I refused to buy the Sena SC2 Intercom. I already bought a Sena 60S and want to use it with my new Schuberth E2. So I did the only sensibel thing and printed my own. It uses the exzellent Schuberth SC2 replacement Cover from guidosenff .
Use this to integrate your new Luke's Lab Chube Compact with your Dragon Burner V8 setup. Supports Top rails only at the moment. You just need to new hotend adapter and the spacers, everything else can be reused! Print with standard Voron…
Integrate the Chube Compact with your Calamity and CPAP setup! CPAP setup currently only works with the LGX Lite Pro. CAD is included if you want to undertake updating the CPAP interface to allow more clearance. General I personally find…
Replacement chin ventilation button for the Schuberth C5 motorcycle helmet. Designed to be a tight snap fit and NOT toggleable. Great if you lose yours or if you just don't like that this button is so easy to accidentally toggle. I've…
PlayStation 4/5 Resident Evil Spieleständer, Vitrinenschuber MMU und Single Version Hallo, bei dem folgenden Modell handelt es sich um einen Spieleständer im Resident Evil Design. In dem Spieleständer finden bis zu 10 PS4 oder PS5 Spiele…