333 modeli
Last minute print for the year ;) Set to 3mm height scaled to 70% in slicer (effective height 2.1mm) 100% infill Octagram Spiral has a nice effect on the top surface! I printed it in PETG, because I had no PLA in green color…
I print it with 0.25 nozzle Draw with Tinkercat
clover spinner cool for stress relief
Just an Irish print for Saint Patrick's Day resembling the clover. Great idea is to do a colour change and maybe upscale it, depending on your uses. May you find a pot of gold on March 17th.
This 4 Leaf Clover Layered Fidget is sure to bring you luck…or some quality fidget time:) 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill No supports needed Recommend a Smooth Print Plate Dimensions of 4 Leaf Clover…
Clover and Blossom Keychain Category: Keychains
NOTE: I've updated this print with versions containing looser tolerances that may work better for some printers. The angled leaves of the clover-shaped links on this print-in-place bracelet look very nice when printed in dichromatic PLA,…
Four leaf clover keychain to celebrate St. Patrick's day. Scale however you wish.
Created a shamrock for some St. Patrick's Day decorations. Simple model made in Tinkercad with slight editing. Resize and print to your desired depth. I made the Z axis about 0.5 inch so it could stand up on its own. No supports needed if…
Cloverleaf keychain (čtyřlístek klíčenka)
Both about 35mm x 27mm 4mm base and 0.8mm color change 4.8mm thick total
This is a lucky cloverleaf for 2026 Wish you all the best for next year!
Magnetic fidget slider with satisfying haptic feedback and click. The convex shape and debossed clover leaves ensure a comfortable grip for easy manipulation without causing hand fatigue. Small size makes this lucky charm easy to pocket.…
Congratulations, you've found a four-leaf clover! 🥳 Two STL versions, with a groove along the contour of each leaf and without. Three profiles, the first two are the same STL, in the first profile the fuzzy skin is enabled. Easy to print,…
Flexi Articulating 4 Leaf Clover or Shamrock Keychain for St. Patrick's Day I wasn't a huge fan of the other flexi/articulating clover keychains I found on here, so I decided I would try to make my own. This is one of my first experiments…
Wishing you good work and fun I would be happy to receive feedback and photos of the make. Thanks
Cookie cutters
Cute Shamrock themed boy gnome for St. Patrick's day. Single color and color change at base layer print profiles available. Color change at the top of the base clover print profile may need a pause added when you slice depending on…
Embosser for paper and cardboard with hearts, Rose, Bird, Hummingbird, Swallow, Seagull, Flamingo, Dolphin, Seahorse, Angelfish, Cheetah, Clover, Infinity symbol Try version V2 with 0.3mm clearance if the hinge sticks. Hinge system…
Four Leaf Clover headband to celebrate St. Patrick's Day
The puzzle is an easily printable interlocking puzzle. No matter how many times I complete this puzzle, it still challenges me everytime. This design is based on the Hanayama Coaster Puzzle, which is no longer available in most online…
Made a quick little four leafed clover shirt pin. It is designed to fit a paperclip into the back as seen in photo to attach to a shirt collar, hat belt, or anything else you'd like.
A clover to hang on the wall. The standart model is 2mm thick, the best waty to mount it is with double sided tape. If anyone has any questions please contact me, THop3D
Updated version here! Magnetic fidget slider with satisfying haptic feedback and click. The convex shape and debossed clover leaves ensure a comfortable grip for easy manipulation without causing hand fatigue. Small size makes this lucky…
Mark your balls with some luck. 4 leaf clover shamrock style. Use a sharpie or similar. Ultra Fine point tip for the stem.
Designed with 1mm tolerances. I printed in PLA with either forest matte green or silk gold. Approximately 3.5" overall and ¼" thick.
☘ Knitted 4 Leaf Clover Shamrock Keychain ☘ Join my Patreon for a commercial license and more models! https://www.patreon.com/Smoggy3D
Four-Leaf Clover Keychain – A Lucky Last-Minute Gift! Forgot to grab a gift? No worries, ya gobshite - this Four-Leaf Clover Keychain is here to save your skin! Quick to print and easy to carry, this lucky charm is perfect for bringing a…
4 Leaf Clover Coin (Shamrock) created from the http://www.fontspace.com/fonts-n-things/clover-things font which authorizes personal use. Tinkercad file can be edited at https://tinkercad.com/things/fuayB1Vt4aY Experiment creating 3D…
Záložka se vytiskne za cca 26 minut.
This is a cookie cutter in the shape of a four leaf clover. For St. Patrick's Day!
Who doesn't love a good book about the Irish?
The 4 Leafed Clover golf ball stencil insert provides a fun marker friendly logo that stands out on any golf ball that works with the PrintSphere Golf Ball Stencil Holder ( hinged or unhinged ) or the Golf Ball Spray Paint Stencil Jig .…
Just a simple 4 leaf clover keychain to always have a little luck with you :)
A lighter case designed to fit your standard size Bic lighter adorned with a clover of Celtic design.
This is simply button in clover shape. Comes in two sizes, aprox. 12 and 14 milimeters. Printing instructions: On pictures they are printed with PM green PLA in 0.15 resolution. BUT, if you have satin or textured sheet, try printing…
Cute clover themed dragon for St. Patrick's day. Print one today to bring you a little dragon-luck! File prints 18in/48cm long dragon. Fits on smaller 180mm^2 printer plates. Prints with no supports at this size or smaller. Strength…
These tools are used for making consistently sized picots when needle, shuttle, or cro-tatting. After I made the Laci's Picot Gauge replica I decided to do the same thing with the Clover set. You'll find the same 7 sizes that the clover…
This four-leaf clover is a small symbol of luck – perfect as a decorative item, gift, or lucky charm. Whether on your desk, in a plant pot, or as a magnet or keychain – this makes a thoughtful little present. ✔ Flat back – ideal for…
This is a lucky cloverleaf for 2024 Wish you all the best for next year!
I designed this straw topper for St. Patrick's day, Because at heart we are all Irish especially on St. Paddy's Day. Print Settings Printer: Ender 3 V2 Neo Rafts: No Supports: No Resolution: .02 Infill: 50 Filament: 3D Solutech PETG Green…
Don't feel like making a trip to the dollar store? Print your St. Patty's Day bling at home instead! Why spend a couple of bucks on a lucky shamrock necklace when you can make one at home in just 8-10 hours. This is the perfect accessory…
four leaf clover croc charm Category: Fashion
After printing about a dozen of my earlier revision I decided to improve this by capturing the magnets inside the print. Now there is a pause at 2.6mm to insert the five magnets. This way there is no gluing or pressing magnets into place…
The STEP file contains three sperate objects which are separated by a small (0.2mm) gap. When printed separately they nest together for me with just enough friction to not slide out. I printed the inner and outer in a forest-green PLA and…
Un portachiavi a forma del toro nero di Black Clover per gli appassionati di anime
Celebrate your next drink with a festive tankard full of luck and gold! Prints Without Supports and Fits Multiple Can Sizes with Mythic Inserts By default, a Mythic Mug holds a 500ml (16.9oz) can , but with removable Mythic Inserts, it…
The demon destroyer sword from black clover.
Easy printable. For nuts and crackers.
Originally published way back in June 2018, but now brought over here to Printables! Vase mode is a lot of fun already, but I'm having a blast working with designs that incorporate several different vase-mode-printed components! Now, you…
I make gimbal keychains for most holidays as a fun "business card." They're great small pieces that can easily show off some of the things you can do with 3D printing. Here's the one I made for St. Patrick's Day! This prints as one single…
Lucky spinning coin just in time for St. Patrick's day. Fun to fidget with.
Pop up clover shaped basket. Print in place, can be used as trivet when flat or as a basket when popped up. Note: This is a very precise print and will only successfully print on well calibrated printers and close following of directions.…
Don't let the length of this short maze fool you, the tight turns will exercise your bird's beak and brain! Part of the parrot maze puzzle collection. Requires the mount and treat container . All of the maze puzzles have been tested with…
Simple Four-leaf clover. Can be used as a pendant or decoration. There are three different variants with a different position of the hole and one without a hole.
A festive dice box to safekeep your most treasured dice and load them up with all the luck you may need! Prints Without Supports and Uses The Same Threaded System as the Mythic Mugs Protective dice storage with a fantasy theme. Use it to…
Get the 4-pack bundle on Etsy: https://www.etsy.com/listing/4465382777/floral-cookie-cutter-stl-bundle-rose Commercial license available here: https://www.patreon.com/CookyStl Add a fresh and elegant touch to your baking projects with…
Cute Shamrock themed girl gnome for St. Patrick's day. Be sure to check out our boy Shamrock themed gnome! Single color, color change at base layer, and STL print files available. Color change at the top of the base clover print profile…
Meet the Cloversaurus, a toy I designed by combining random ideas from a gachapon machine. This is a guessing-game/toy where you can try to pick the 4-leaf clover. It also fits inside 50mm Gachapon Capsules! Just print it at 55% size to…
This is a lucky cloverleaf for 2025 Wish you all the best for next year!
Asta has died and his tomb is marked with his sword and his book of Grimoire. The tomb has been overtaken by vines.
If you have a Bambu Labs printer with an AMS then the plate file is included with the models pre-painted. If you do not have a printer with multi-color capability, then you should change the filament about halfway through each panel in…
March/St. Patrick's Day Lego Wreath! Another version of the Lego Wreath. This one is 24" in diameter with 8 pieces. Print one with the hook, so you can easily hang it. Check out my page to see the studs I designed for the other months.
The 24mm(.9 inch) shamrock earring\charm size can be printed in around 7-11 min depending on your speed settings! Can be resized to any size within the slicer, no 3d modeling or parametrics required! No supports needed, but 5mm brim is…
Consists of a shaping tool and the final holder. You need to print this very fine cause we have very thin walls. 03.09.2013: Design changes done. Now I get much better results even with 0,18mm layer height. 05.09.2013: Changed the…
A couple of decorative designs for St. Patty's Day. Included are the Four Leaf Clover Candy Bowl & Vase, featuring an embossed Celtic pattern. **This design is uploaded with a non-commercial license. Downloading this file does not grant…
Lucky Clover decoration for St. Patrick's Day. Layer order - Forest Green (darker green) Apple Green (lighter green) Yellow Category: 2D Art
Clover Keychain This keychain is perfect for personal use or for a gift to others. Dimensions: 61.84mm (H) × 58.55mm (W) × 12mm (D) Note: These dimensions are from a top down perspective Why You'll Love It: ✅Quick & Efficient Print – Uses…
This is a lucky cloverleaf for 2023 Wish you all the best for next year!
The original model featured a hole for a C7 Type connector (The one with only two pins) on one side. Because mine had an plug of the C5 Type (looks like an cloverleaf) it woudnt fit. I edited it so it fits for my plug. For this remix i…
Multicolor print. No support. If you have any question, just write me here or on instagram 🐞 PLA colors which I used: black, red and green.
I wanted a napkin holder for my St. Patrick's Day decorations so made this clover-themed holder. Print Settings Printer Brand: Creality Printer: CR-6 SE Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament: eSun PLA+ Green…
Here are three beautiful ornaments for the tree! The closed version (center in the picture) is the easiest to print. I've provided my Prusaslicer 3MF files and Prusa MK3S+ GCODE in addition to my STL/OBJ files. If you try importing the…
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
I made this for my wives daycare kids for saint Patrick's day
I saw a PF2023 cloverleaf keychain and thought that it has a huge potentional with upcoming prusa slicer de/embosing
Creado en fusion 360, hacer el cambio de color dependiendo de las alturas de capas
Hello everyone,I was looking for a clover with a magnet. Unfortunately, I couldn't find one here, so I quickly created a magnet clover. I have provided this with the numbers 2026 on the front, but these can also simply be omitted if it is…
Be sure to print with color change to get multiple colors. Also if you want to modify the OpenSCAD file for lucky the leprechaun be sure to get the PNG from the photos section. (Posted to reddit as /u/NoveltyAccountHater ).
SUMMARY SECTION Feeling lucky? Love basketball? Get yourself this mesmerizing 9.1 cm × 9.4 cm × 2.0 cm telescopic clover! With its hypotizing, elastic-like features, you will never be bored with this fidget. To create this project, I…
This is a holder/organizer for the 3672 set of Clover crotchet hooks. My wife wanted a holder for these that would make them easier to grab when she needed one. I added the size to the front to make it easier to pick the right one. I…
printet this in two colours.. temp. change green and pink.. original design had only 3 leafs (Irish thing). i needed 4 leafs for good luck.. please press Like, before you print this.. Need money for filament, so if you can & will donate a…
Want to show off your top? Download my Display Stand for Tops . Update I've been experimenting with printing this top at smaller sizes and I've succeeded in printing it so it looks and spins well all the way down to 55%. To get the stem…
Beat the odds! I usually never buy scratch tickets, but a friend thought it would be fun to get me a handful for my birthday. To make sure I had the best chance possible of getting a good scratch-off result, I didn't want to just rely on…
Simple Cloverleaf with 2020 written on it Print instructions printed with "0.10 Detail Mk3" standard settings add "manual filament change" after 2mm for dual color
I made this magnetic four leaf clover to spice up and theme your magnetic bulletin board, fridge, or any other metallic surface you would want to slap it on. Enjoy! 0.2 mm, 3 walls, 15% infill Use 12mm x 1.5 mm magnets (It's a tight fit…
Simple four-leaf clover shaped cabinet knob. I used 10% grid infill but you can use whatever you want beacuse it doesn't need a lot of infill.
Print base and clover. Pieces snap together with my FDM printer. Glue optional. If they are too tight, try printing the shamrock 2% smaller or lower flow. Horizontal expansion settings may also be useful in getting the fight ‘just right’.…
Giant clover compatible with Mego Lego-like Skeleton Printed as one part with supports but fusion file should also include a split version and pins if you advance the design history
Simple Flat Base Four Leaf Clover with added depth Category: Art
Clover Shamrock -Version 1 (has holes on back for button magnets). Clover Shamrock -Version 2 -Fidget Spinner Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
I thought the original design was too thick and damages the pages of the books. This is only 0.8mm, instead of 1.5mm original, which is much more friendly to paper pages.
![Parrot Puzzle Maze: Cloverleaf [Intermediate]](https://media.printables.com/media/prints/94665/images/971698_ddf857ec-3eb6-45ec-93a6-d59b3e21d2f1/large_display_pep_clover_94665.jpg)
