87 modeli
A mini version of the Boeing CST-100 Starliner crew capsule you can use for your classroom. Should be easy to print without any supports. Added a “scorched” version to match the signature scorch mark on the side of the Starliner capsule…
Wydruk około 7,14 €–8,72 € nettoWstępna wycena jednego wariantu
Rolls Royce's spirit of ecstasy.
This was a model I downloaded as an experiment in colouring PLA 3D prints. It was printed on a Kobra 2, using Sunlu black PLA. I wanted to try giving it a metallic sheen and I think I have managed it. It would probably look better with a…
I created this to keep my DCST922 string trimmer up on the wall. It can be hung with the trimmer folded, facing either direction. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with…
This parametric box system was developed for the IKEA Skadis pegboard. With the help of FreeCAD , you can easily define and print the desired dimensions of your box or shelf. The design is compatible with the CSD_Salzburg system, ensuring…
I modified my earlier version to more closely resemble my other DeWalt wall mounts. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with PLA @ 20% infill, and using Prusa Slicers…
Original Ender3 .f3d converted for FreeCAD
Printed replacement parts for the microphone clip damaged due to a fall. filament:PETG If the attachment to the stand is loose, please create shims as needed to secure it.
Summary I really liked the original except for three things: 1) The wording on the base 2) It just seemed too tall for the glasses I have 3) The coin inserts This version removes the wording, decreases the height by 2.5cm (overall height…
Just a simple headrest to attach to a microphone stand that helps keep your subject from moving their head when doing long exposures. PETG/PLA both work well No supports needed when printing in the orientation the files are in
Dewalt DCST922 Strap mount Add a shoulder strap to your Dewalt string trimmer ABS .2 Layer height 100% Infill Supports required on part 1 Hardware: 4 - M5 x 20mm cap head screws 4 - M5 x Flat washers 4 - M5 Threaded heat set inserts If…
This is a middle plate for the PCB of a mechanical keyboard called CSTC40.
To fix something around a screw rod M6円錐形化粧ナット 穴のあいているものをネジの中心に固定したいときに使います KnurledCone: insert an M6 nut DecagonConeNut: insert an M6 nut DecagonConeM6: already M6-threaded Tube-shape support materials are initially prepared in…
M27 / Reducer / Pipe reducer / Adapter / Fitting reducer
Added an antenna mount for the 30 degree bigmcstinky, but also included the antenna mount portion so you can add it to any mcstinky mount. UPDATE April 2024: Added a shorter slightly lighter and more low profile antenna mount and added a…
Scale it 99-101% in x- and y-directions with your slicer to tighten or loosen it. It is a good idea to tap the thread after printing. ネジが緩すぎたりきつすぎたりする場合はスライサーでｘｙ方向に縮小または拡大するとよいでしょう。印刷後にタップでネジ穴を仕上げるのもよいでしょう。
GoPro mount part: "for microphone stand /-arm" I use this for many constructions/mounting systems. /////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150…
Migrating from thingiverse https://www.thingiverse.com/thing:3834064 remix of https://www.thingiverse.com/thing:3145530 FreeCad was complaining about errors in the mesh, used blender to partially fix it, and finalized the fix in freecad.…
Subido en formato de Freecad para adaptarlo a las necesidades de cada uno.
My new Aiper pool robot vacuum has a knob that is hard to turn. I created a spreadsheet-driven FreeCAD file that created the perfect wrench for this. the design is flexible enough to use for other such applications
A Tri-Bahtinov Mask made for collimating the Celestron Edge HD 8" (CST) and standard C8 version with a Hyperstar 8 v4 installed. With the Hyperstar 8 v4 installed the mask needs different slit sizes as well as a split design to allow for…
The Design / A Tervezés: The hinge mechanism is designed with a ~0.3mm tolerance, ensuring that the joints print smoothly without fusing together on a well-calibrated printer. (A csuklók ~0.3 mm-es hézaggal/tűréssel lettek megtervezve a…
A set of mounts that can be attached to the NcStar Vism Delta scope. Please note that the RMR mount I am using is the Trijicon style. I have included several versions of it: (1) RMR on the left side (mirror for right side), Picatinny on…
This headset holder can clip onto all tables with thickness of 34mm. A FreeCAD file is included, so you can change the thickness.
Printing Instructions 0.2mm layer height, all including 1st layer. 15% infill grid 2 perimeters no supports letter face on plate ABS recommended (and tested) For convenience, a 3mf file for use with Core One is included. It contains all…
Add a musical touch to your home! This beautiful wind chime with musical note motifs will bring visual and auditory pleasure to your space. The gentle tones that drift in the wind will soothe and caress your soul. Ideal for the garden,…
Just a replacement part for an old Ferrari like Playmobil car (model 3708). Do you like my design? Print, upload your MAKE, receive Prusameters! Please leave a “like” …. ❤ Feel free to follow me …. ✅
Egyszerű Cápa csuklós kulcstartó. Tetszés szerint nagyítsd. Ha tetszik néz be az oldalamra.
The Sun “lunchbox” SPARCstation systems – like the IPC and IPX – have a neat drop-in setup for their SCSI hard drives. But this relies on the drive's mounting screws being in specific places that not all have. This bracket lets you mount…
Introduction: Are you frustrated by the absence of suitable measuring spoons for your dish washing machine powder? Introducing our customizable measuring spoon, engineered to hold the precise volume you require. Design using FreeCAD.…
Continuously Stirred Tank Reactor (CSTR), assembled with 5 bodies, important to print the "Bar" part 3 times. for the stirrer I would recomend printing with some rafts
I got a SPARCstation IPX that was missing its floppy drive. I didn't really need it, so I decided to design this bracket to let me install an SD card extender in its place, for use with the BlueSCSI I also installed. (If you need a…
Model of the Magnetic Storm series w-engine from the video game ZenlessZoneZero.
Tiszás kulcstartó és bevásárlókocsi érme.
Really don't like the new eco friendly paper straws which stick to my lips and have a paper taste. This is a very simple design that fits on the top of the straw eliminating that lip sticking and paper taste.
A Bahtinov Mask made for the Celestron Edge HD 8" (CST) which also should work for the standard C8 version. With the Hyperstar 8 v4 installed the mask needs different slit sizes as well as a split design to allow for installation with…
You can print as is with no supports needed. I would suggest 3 walls minimum as I don't have any pillars for screws (not that advanced yet in design). I used clear PETG so the lights on the bottom can shine through. Just used a little…
Printed with PETG .2 mm layer height with tree supports auto to support the horizontal sections. After printing I realized that I could have printed it with the "make overhangs printable to increase strength and reduce waste.
This 3D figure is design for KCSTUDIO's Baldur miniature, if u buy their figure and u don't want to print that stand u can print this. Just for fun, ıt is not intended to make money. Support the main designer! What a great model. -Infill…
Ecstasy of Saint Teresa Decor
Hungarian Ducati Club keyholder, maded for a community member
Minecraft logó kulcstaró. Ha tetszik nézz szét oldalamon!
I use some mobile apps instead of paper to play written music, so I wanted to replace the foladbale paper holder thing from my music stand with a phone holder. I already had printed this phone mount system:…
Akusztikus gitár kulcstartó
Lepd meg édesanyádat egy különleges, 3D nyomtatott ajándékkal! 💖 Ez a “Super Mom” kulcstartó tökéletes választás Anyák napjára, születésnapra vagy csak egy kedves meglepetésként. Egyszerűen nyomtatható modell, kezdőknek is ideális. Kis…
I use some mobile apps instead of paper to play written music, so I wanted to replace the foldable paper holder thing from my music stand with a phone holder. I already had printed this phone mount system:…
Materials needed 10mm x 5mm x 2mm Magnets 2.2mm x 6mm Screws Stainless Steel Printing Instructions Layer Height: 0.2mm Material: PLA, ABS, ... 2 Perimeters 15% Infill Assembly Instructions Slide magnet into slot Secure with 2.2…
I got a SparcStation 2 with a dead SCSI drive and decided to replace it with a solid state solution. Unfortunately, I only had a SCSI2SD 4.5 around the house and it seems to be a model that doesn't get many 3D adaptors devoted to it. So I…
Tool for stage magicians. Video explanation: To be wrapped with rubberbands of 2cm diameter, forming an open parabolic envelope / curve stitching. The 2 holes are for pins going through. Designed in Hong Kong. Category: Tool Holders & Boxes
3D Printed positioning plate for the CSTC40 following Aneko Sakone's and Pabile's P48 plate design.
I design this quick and clearly not perfect holder to put my MacStudio under my desk. I used 8 threaded inserts (M5) in the four joints and some bolts to put everything together. It's printable in two parts, joined by an 2x M3 screws. You…
NewScottie.FCStd is FreeCAD source. Adjustable parameters are in items of Top and TissueBox in NewScottie.FCStd, FreeCAD source. Default sizes are: Tissue box: 64.6 mm x 110.0 mm Line size: 4.4 mm x 12.0 mm Cabinet shelf thickness: 16.0…
A simple clone of the little part that wedges the floppy drive in place on a Sun SPARCstation 10 computer. It may be used in other Sun-products as well; I'm not sure. I've also made spacers and grommets for the screws in a different…
I wanted to use a female - female duttek 90 deg connector as I'll have an extra from the gopro P2 Pro case.
Pickup frame model for HB CST24
An easily removable universal musicstand beerholder. Works with multiple music and tablet stands Part 2 can be attached to the standard with a cable tie (Mount with arrows pointing up) Part 1 slides on part 2
I wanted an enclosure for a MgcSTEM LVP Module to protect the board from possible short circuits due to foreign objects coming in contact with exposed connections & traces on the circuit board. The LVP module is one of these :…
This is a storage solution for big amounts of optical discs like CDs, DVDs and Blu Rays. One unit can store 100 discs within a footprint of roughly 21cm x 13cm x 13cm. The carrier is snapped into the disc from the top/image side, allowing…
Kazetta kulcstarto Ki emléksziik még?
A wall mount for the remote control of the Teufel Musicstation. The mount can either be screwed using a 3x20mm countersunk screw, or glued with adhesive.
to put yout macstudio under your desk. it can refresh naturarly . Category: Household Supplies
This is a stand with Fan Mount for the LincStation N1 all-ssd NAS. The Passive NVMe cooling is not enough inside a closet during warm summer days so thermal throttling slows down the performance. This stand is provided as: OpenSCAD Model…
Wandhalter für Kettensäge von Dewalt DCMCST635
Supports for better PCB support. press four 12mm magnets into base
WHY/WHAT? Replacement treadmill safety key for the Pro-Form 505CST Treadmill. It may fit others but not tested. We have been using it for about a week, now. HOW? Print Details: Material: Any, really. I used PETG. Nozzle Profile: .4mm…
Replacement Gear for the Gardena CST 2018-Li Accu Chainsaw Press out the olt Metal Part and press it into the new Gear. 100% Infil PETG or Greentec Pro Category: Other
GearDrive/GearBox адаптеры для дисков Exway 200x70 ACE CST. Выражаю огромную благодарность Дмитрию Зайцеву (aka 3DA / ник в Telegram - @zda_29) за моделирование данного изделия. Для тестирования нагрузки был использован материал PPA-CF…
Introduction: Are you frustrated by the absence of suitable measuring spoons for your dish washing machine powder? Introducing our customizable measuring spoon, engineered to hold the precise volume you require. Design using FreeCAD.…
This is a storage solution for big amounts of optical discs like CDs, DVDs and Blu Rays. One unit can store 100 discs within a footprint of roughly 21cm x 13cm x 13cm. The carrier is snapped into the disc from the top/image side, allowing…
Continuously Stirred Tank Reactor (CSTR), assembled with 5 bodies, important to print the "Bar" part 3 times. for the stirrer I would recomend printing with some rafts
Lepd meg édesanyádat egy különleges, 3D nyomtatott ajándékkal! 💖 Ez a “Super Mom” kulcstartó tökéletes választás Anyák napjára, születésnapra vagy csak egy kedves meglepetésként. Egyszerűen nyomtatható modell, kezdőknek is ideális. Kis…
Scale it 99-101% in x- and y-directions with your slicer to tighten or loosen it. It is a good idea to tap the thread after printing. ネジが緩すぎたりきつすぎたりする場合はスライサーでｘｙ方向に縮小または拡大するとよいでしょう。印刷後にタップでネジ穴を仕上げるのもよいでしょう。
![GoPro mount part [for micstand/-arm]](https://media.printables.com/media/prints/220171/images/2007047_2957bbc9-5560-486c-8cc9-051b8bc65942/gopro-mount-part-for-micstand_-arm-sw.jpg)
