764 modeli
I’ve transformed the iconic Benchy into a fully functional pencil sharpener with a hidden twist! The goal? Keep the classic boat look while integrating a discreet sharpener under its removable roof. 🎨 Clever Design: The cabin is fully…
Wydruk około 0,68 €–0,84 € nettoWstępna wycena jednego wariantu
There are many overhang test models with 60, 70 or 80 degree overhangs, but do they ever actually print 70 degree overhangs? In the actual shape of the model to be printed, even an overhang of only 55 degrees is extremely difficult. This…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Small Rittal key, to open electrical cabinets. print intructions: PLA 100% infill 4-5 perimeters
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
This is a replacement threaded cap for a SotaBeams Tactical Mini. Mine broke so a created this to replace it. I printed in ASA to withstand the Texas summer heat and with 0.1 layer height for thread resolution.
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
This a ring to attach guy lines too for supporting a SotaBeams Tactical Mini.
Wydruk około 1,35 €–1,66 € nettoWstępna wycena jednego wariantu
Info ------------------------------------------------------------------ This is a rack mount V1 (without an top lid) for the Philips Hue Bridge (V2). I used ShapR3D for modelling. Choose your Version (right or left). Please use 6mm screws…
Wydruk około 6,07 €–7,42 € nettoWstępna wycena jednego wariantu
IKEA PAX Mouse Holder – Stylish and Practical Accessory Storage Keep your workspace clean and organized with this custom-designed mouse holder, perfectly compatible with the IKEA PAX wardrobe system! This holder allows you to neatly hang…
Wydruk około 2,92 €–3,57 € nettoWstępna wycena jednego wariantu
Practical pot support to keep pot base out of the water when using a deeper layer of water in a humidity tray. Easy to scale up and down in XYZ to suit your needs. Can be done with 10% infill, but bridging for the cross-cut on the bottom…
Wydruk około 0,77 €–0,95 € nettoWstępna wycena jednego wariantu
IKEA KAKTUS Hanger for PAX Doors – Stylish and Practical Mount Add a touch of greenery to your IKEA PAX wardrobe with this custom-designed hanger for the IKEA KAKTUS planter. This clever accessory allows you to securely hang your planter…
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
An minimal yet elegant combat Karambit knife. The Finger cutouts use the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or…
OpenVessel 2.0 is a redesigned benchmark model for testing your 3D printer’s capabilities. The original was scrapped to make this version unique and functional without resembling Benchy. It’s simple, effective, and even floats upright in…
Printable without support. Holes for microphone included. Filament need 12m (2 perimeters 15% infil). Versions A, B, C, D, I, J, K, L, Q, R, S, T…..For phones with cover, max phone depth 21mm E, F, G, H, M, N, O, P, U V, W, X…..For phones…
Stop it! Yes, I'm back with more bad puns and a useful print. This practical, easy-to-print design was something I threw together in Fusion 360. I didn't want a Hodor (sorry) or a solid doorstop. Instead, I wanted something that would…
Fits a Zyn can, but I don't know what other tins it might fit, let me know if you want another size Zonnic Tin/can sizes added (5.2mm wider) - 12/18/23
About This Remix: This is a remix of the Sith Acolyte Mask (Star Wars) by Killonious . Killonious did a wonderful job designing the mask as a prop display mask. They also have an etsy shop . I made this remix because the mask was…
🐾 Black Cat Bag Clip – Playful and Practical Add a touch of humor and charm to your kitchen with this whimsical black cat-shaped bag clip! Designed to seal bread bags and other packaging with a cheeky twist, this clip combines…
If you are one of the billions of people who keep their toothbrushes in a cup, put this functional model in your print queue. Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Sell unique, stylish, and modern 3D models with a commercial license – no restrictions, full freedom! 💸 Why…
My airsoft vest is great for me, but storing it is quite a pain because you can't really just hang it somewhere on a normal coat hanger or lay it flat without it taking up a huge space. So I took to the drawing board and made the TVH…
B.B.B.B - Locked, loaded, and scaled to perfection! The BIG BORE BULLET BOX is a 10x upscaled replica of a real 9x19 mm cartridge, precisely engineered down to the hundredth of a millimeter . Every radius, angle, and dimension has been…
Remix of the Zyn Tactical Snus Holder from @JacksonSediv_1247627 Fits a Velo can, but I don't know what other tins it might fit. Tactical Swedish Snus Holster for Velo's. Can be attatched on a Tool Belt or Pants. Does require supports,…
Wanted to make a helldivers cosplay for comic con, found this great model by ZerekMasters that looked perfect. However it had some problems like too many polygons and other misc. errors. Fixed the models up in OrcaSlicer and sliced them…
There are many suggestions on what a good box for metal drills should look like, but none of the ones I found had all the requirements I was looking for. It had to be a simple design, with clear indication of size, small drills from left…
I had seen the movie Captain America Civil War with my boys and really like the sinister look about this mask. I was originally going to do a couple for my sons to go paint balling in. But I needed to do a little more research on the eye…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE January 1st 2024- Added 2 styles of internal trays.…
!!WARNING!! I am not a structural engineer! I am making this sh!t up as I go along. The risk I see with the project is the risk of the PETG limbs giving out while under tension. This could result in the limbs shattering. For safety sake,…
Introducing my meticulously designed 3D model holster crafted specifically for the Ruger Mark 4 22/45 Tactical with a 4.4" barrel . Precision-engineered, the holster is molded to perfectly fit the contours of the Ruger Mark 4 22/45…
Model improved from my previous iteration
This is the fan art of B01-Tactical armor from Helldivers2. The item is a .stl file for a chibi character, designed for 3d printing. Feel free to edit and use it as you wish. Also check out the mechs you can sit the little guy in! EXO-45…
Fixed the height of the Monster can with the “Fixed Height” Files.
Zoom throw lever for Vortex Diamondback Tactical 6-24x50 FFP Probably works with some other Vortex scopes. I redesigned a bit the zoom throw lever by NJ_v_N. Added 3mm threaded insert, elongated the lever. Print Settings Printer: Printo3D…
Tired of constantly tripping over swords, or looking at that pile of swords laying in the corner? Look no further for your sword management system then this wall mount for swords! Print instructions Supports are needed.
This military-inspired pen holder is designed as a tactical vest, combining a strong, disciplined aesthetic with everyday desk functionality. The model features clean, solid geometry optimized for easy 3D printing without supports ,…
Classic untextured Hoffman Tactical grip 3.1 with a simple beavertail mod. Fits all AR grip mounts that are Milspec. Requires supports on the beaver tail and some sanding. Fuzzy skin settings; thickness 0.1, point distance 0.5.
Knee/Shin plates for the right leg, mirror the model for the left leg. Model ripped from the game and cleaned in blender
Tactical unicorn horn on a NVG mount so you can show every one that your a VERY SPECIAL soldier… The Tactical unicorn horn will make sure you never run out of ammo and you become invisible…… OR maybe NOT!! I dont know ;) Small model is…
Another tactical rigid MOLLE Panel. I add some hole in the panel to set something with paracord or mini-bungee. And a lateral fixation hole to couple more than one panel. The 4X3 fit in a Ender3 with something like 18x19cm, and for…
I recommend printing with durable filament. PLA will still work but might wear down or break after time. If you liked this model, be sure to check out my other models.
Tactical Inspired Airsoft Mask Enjoy Category: 3D Printing
A ZenitCo RK-2 "clone" with 2 different mounts. Print with more perimeters, the more the better. The CAP for Mount1 Fits both mount types! Contact me for commercial use. AIRSOFT ONLY! Not for real firearms!
Thigh plate for right leg, mirror model to get the left. Model ripped from the game and cleaned up in blender.
Tactical Paracord Dispenser/Rewinder. NOW YOU CAN GO BACK IF YOU PULL TOO MUCH. Assembly on gif image. You'll need: 9x M4x30 DIN912 screws 1x M4x20 (or 18mm) 1x M4x5 (optional if you want to have something on end of crank - I did) You'll…
Print in TPU and you can size it to fit your needs. I printed it with 4-line walls 15% infill, and it held my spring-loaded garage door open.
!!WARNING!! I am not a structural engineer! I am making this shit up as I go along. The risk I see with the project is the risk of the PETG limbs giving out while under tension. This could result in the limbs shattering. For safety sake,…
Angled Vertical Foregrip (M-Lok) This is made in Shapr3D. Low-profile angled platform with ggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future. I'm adding a 3mf and stl file…
to assemble it you will need 6 m3x10 socket head screws
This is a "first working version" prototype. I have several plans to refine it. A remix of Crossbow, Western style and others The scale of your crossbow is dependant on the size of your build plate, at this scale you will need a…
Hello Nerf enthusiasts, If you're looking to elevate your Nerf Jolt experience, look no further! Here, you'll find an exceptional custom Upgrade Kit that not only enhances your blaster but also imbues it with a unique military aesthetic.…
A highly detailed collectible statue featuring a voluptuous female sci-fi soldier. The confident trooper stands in a striking pose, armed with an assault rifle and wearing tactical gear, including a combat helmet, spiked armor pads, and a…
EDC tactical tool Can be used as scraper. Printer: Artillery GENIUS PRO Resolution: 0.2 PED magnetic sheet Filament brand: Esun Filament material: PLA+ Slicer: Prusa slicer
imagine a situation where somebody cut himself and he ask you to fetch the FirstAid kit in a backpack. WHERE? most backpacks have 5pockets+ and hiding places. you cannot afford to waste time in an emergency situation! here is the…
Tactical cover for Monster / Redbull can (0,5L / 0,33L) Printed with PP (polipropynene) but all kind of filaments are ok printed with supports Coca cola can soon
This is a very tactical pen. It's so tactical, you even forget about how “pen” it is. And it writes your name! But hold on! That's not all!!! It can write about every name! Isn't that amazing? But the next feature will blow you away: You…
If you like this design, please leave a like, download the model, and follow me for more practical and stylish 3D-printable designs. Your support helps me in the competition and motivates me to create even more useful models! Organize…
Comes with detailed instrutions and is easy to print. Have fun! Juri
Tactical MP5 Gnome – Guardian of the Garden This ain't your average garden gnome. Fully kitted out with night vision goggles and gripping an MP5 like he's on a midnight recon mission, this tactical gnome is ready to defend your…
I'm very new to modeling/printing so I thought I'd start with something simple geometrically - after printing a Lucky 13 figure I saw some useful learning opportunities. I used sozo13's AR15 as a base using the pistol grip and stock, then…
Use the screw that came with the camera case. Push the back of the print into the slot and push the front firmly until it clicks and is securely in place. Use the lowest possible layer height and a wall count of 4 for best results (with…
Designed this 3 years ago and originally uploaded on Thingiverse. Had to recently reprint one after this time and have since primarily using Printables, so uploading here. Picatinny rail attachment for Tactical Torch of 25mm Diameter…
Mossberg Tactical Shotgun for Dummy 13
Simple and fast to print. Can easily be printed in batches. It doesn't get any simpler than that. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs,…
Diseño Nyx es una figura táctical de anime creada para brindar a los entusiastas de la impresión 3D una representación detallada y llamativa. Con un diseño dinámico y una postura de acción preparada, evoca la energía y estilo de los…
This remix has a toothed grip on one side more suited to carpeted floors. Prints on the side (teeth out), like the original, with no supports.
Stylish and Practical Cigarette Case for 3D Printing With this self-designed cigarette case, you always have your cigarettes stylishly and safely at hand. Design: Sleek and modern design fits perfectly in any pocket or handbag. Compact…
A Tactical Cable Clamp Mounts on a Picattinny/Weaver rail systems Allows for easy cable management Compatible with most wired electronic handguard attachments
Altura Recomendada 150mm Diseño Una figura modelada para capturar la esencia táctica y enérgica de Judy Hopps, inspirada en la película Zootopia. El diseño busca resaltar su personalidad fuerte y decidida combinado con un atuendo de…
Some parts require supports Modified the Lego man parts to fit this build. The clear helmet shield and shield window I printed with 0 Infill to avoid lines within. On the face just painted it or you can use a sharpie. Before printing…
Tactical shield that fits in the hands of the MINI 13 figure. - Handle print with supports - Also available in a version with POLICE lettering.
Comes with assembly instrucitions and is easy to print. Have fun! Juri
UPDATE V2.0 Tactical Emergency Whistle Print in Place / Fast Print / Fast and only a little filament. I wanted an emergency whistle, that was always quickly at hand and also served a useful purpose. Small space-saving design that is easy…
Printed in PETG with supports using an Ender 3 v2 The led lights are held on with 3M DUAL LOCK Self Adhesive DOTS Pads from ebay https://www.ebay.co.uk/itm/142285986108?var=441337057038 The LEDS are from Amazon…
This model is compatible with the lego system.
this tactical combat knife is not for actually stabbing someone please use with care.
Because whoever designed this type of computer case has never seen a cat, or heard of one, for that matter, I had to design this cover so they don't shutdown my computer while I'm using my ninja 3D design skills to create stuff. Print the…
I wanted to make a tactical Mandalorian helmet with different parts across multiple platforms. I added a space for a laser pointer as an attachment (Here's the amazon link for what I assumed I'd use) I will update pictures when I fully…
This rail attachment holds more darts than most others, and attaches securely to the rails of a variety of Elite 2.0 Nerf blasters (including the “short” rails, e.g. on top of the Volt). I really like how the curve of the adjacent holder…
This Box Opener is a practical and sturdy tool for everyday use. Ideal for cutting through tape, boxes, or other light p
This is a plug to fill the void in the SB Tactical AR15 PDW brace. Use supports/rafts at your own discretion. Works well with PLA or ABS. I havn't tested the print using TPU yet. Category: Replacement Parts
Molle tactical tape holder. Fits on most standard vest and belts! Black Esun PLA+ .15mm
I've been using and selling ianiskool's “Bowl Buddy” since 2017. I decided to redesign and make my own and then I added some additional features. Tick remover is untested. 0.2mm initial layer height then 0.08mm is what I suggest. then…
Model of a tactical knife Glock Model Field 78 Original. The supports should be easy to remove as they will run the entire length of the knife. The smaller the resolution, the nicer the model will come out. 50% filling is sufficient.
M-CHAT: MOLLE-Compatible Chapstick Holder for Adventure and Tactical use What it does and problem it solves: The compact and durable MOLLE ChapStick Holder securely accommodates a standard chapstick tube and attaches to MOLLE-compatible…
Update: Was having a problem with the string jumping the bolt. Uploaded new test files to increase reliability. Note; If you use the new trigger and catch you need to use the new trigger box and pins as the location and sizes of the holes…
this file is a ready to slice model. print with PLA or ABS. this is in beta stage. if you want to use paracord for the grip you will have to do it comment if you want me to show how.
EDC tactical knuckles
HELLDIVERS ARMOUR VERY DEMOCRATIC um oops sorry for caps got a little carryied away with DEMOCRACY now where is my liber tea alfred? Spread the word far and wide that you have found the free helldivers armour let there be no stop to this…
Picatinny rail mount for vent rib shotgun. Specifically, it was designed for the Mossberg Maverick 88 and Mossberg 500, but may fit other shotguns as well. The two halves fit together extremely snuggly around the vent rib of the shotgun,…
Ruger Mark 22/45 MK III, IV 22lr Bull Barrel, picatinny adapter, for Mantis X or Tactical light. TRL-1, TRL-7,… Designed to fit the Ruger Target pistol with the 22mm diameter bull barrel. Rounded front, to make sliding on of Mantis X…
Have you ever wished your AR had the sight radius of a Glock 26? Have you been lusting over the new Larue C-note but cannot afford it because you blew all your cash on cocaine? I've been there, so has my wife’s boyfriend, and so has Mark…
**edit: I finally printed it and the print turned out horrible because my printer need some maintenance. But it did complete and I was able to determine it fits my holster so perfect for cosplay or training. Glock training or prop gun…
The Tactical K9 Kollector is the perfect solution for dog owners who want to keep their surroundings clean while on walks with their furry friends. This innovative device allows for installing of a keyring which gives you the possibility…
Attention: I keep seeing people selling these models on Esty and eBay: Digital files and actual prints. STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
Diseño del modelo El diseño de este modelo 3D está inspirado en el personaje de Evangelion llamado 'Rei', con un traje táctico que resalta los detalles de su figura. Se ha cuidado la anatomía y los detalles, lo que lo convierte en una…
Tactical hands for the new Carbon 13! Now your Carbon 13 is less likely to shoot themselves in the foot! I wanted to take a small break from designing my tank model, so I made this. It is inspired by its Dummy 13 counterpart, which you…
Non-functional replica model of a modern semi-automatic handgun with red-dot sight and tactical flashlight.
Tactical mount for 20mm diameter flashlight. 0.2 layer height Print in ASA or ABS.
I've always liked the BIC 4 Colours pen, but I've never been a big fan of its original plastic body. So I decided to design my own, giving my favourite four-colour pen a completely new look! This 3D-printable redesign features a tactical,…
