23 060 modeli
Cute mini Octopus , the ORIGINAL! It's designed so it can be printed at once. No assembly or supports required . Many different STL files, with straight or spiral tentacles, both with and without included support. UPDATE!! v6 fixes some…
This cute and simple dinosaur friend makes an excellent desk companion and comes in two different varieties, shorter and longer legs. The difference isn't massive between the two but I thought it would be best to give folks choice. In the…
Small bowl in the shape of a cute kitty. Features: Two variations, shallow and deep. No support design. 5% infill. Fully scalable Commercial use: To sell prints of this and my other models, you must be a Retron Print Commercial Club…
Print No supports needed. Tested with PETG and PLA. Material One segment from snap-off blade 18 mm ( example 1, example 2) 2 pieces of screw M3 x 25 mm 2 pieces of ball pen spring (probably 20 mm length, 4 mm diameter, M3 screw must fit…
Cute Ghost Friends Print Settings Material: Prusament Gentleman's Grey Pla Nozzle: 0.4mm Support: No
A tiny cute triceratops that uses just 5 grams of filament. Great as a cute decoration, keychain, or little desk dino. Print Settings : Layer height: 0.10 mm Infill: 15% Grid Supports: Yes Support type: organic Fuzzy Skin: Outside walls (…
This cute bear figurine is perfect for a quick print, taking only 25 minutes to complete! Designed with smooth lines and simple shapes, it’s an ideal project for both beginners and seasoned makers. While minimal supports are needed for…
Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
A low poly remix of McGybeer's Cute Mini Octopus, one of the best articulated designs that exists. This model can be printed without any supports, although you may want to use a brim if you don't have very good bed adhesion. Like this…
I've long been a big fan of the Keycappie by Romly, a great little figure that can house a an MX compatible mechanical keyboard switch right in his head. They're so cute that I couldn't resist the temptation to make one of my own. I'm not…
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+ models) Hey everyone! 🦊🍂✨ I’m so excited to share this adorable Flexi Baby Red Panda with you…
It's a pastry cutter. It's very simple. Height is 5.2 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
It's a pastry cutter. It's very simple. Height is 6.2 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
Simple jig for PTFE tube cutting (4mm OD), having: 60° (30), 90° (45) and 120° (60) degree chamfer tool (works like pencil sharpener) Length of 13, 15, 19, 35.3, 38.8, 42.3, 43.4, 44.2, 50 and 66mm cutting tool Needed tools: Sharp blade…
Print Settings Material: Prusament - PLA Opal Green / Prusament - Pla Gentleman Gray Nozzle: 0.4mm Layerheight: 0.10mm Support: Build plate only. (If you want, the bottom of the model will be a little better) Post Process Not necessary
With this jig you're able to cut insulation made from PE or PU in 45° angles. The model in the picture is made for 50mm insulations, although it looks a bit wide (the insulation seems to be smaller than indicated). But I also added…
Here is a figure of a cute grumpy turtle, which is sitting on a rock.
New edition - April 2025: A guide pin has been added to prevent the cutter from twisting. The thread for the screw has been made more print-friendly. All that is needed in addition to the printed parts is 1 segment from 18 mm snap-off…
Universal pen adapter for the Cricut maker 3. Includes pen distance tool. works with anything up to the thickness of a sharpie. Pen distance tool rest/snaps on to the rail allowing you set a 3mm distance.
His friend Print Settings Material: Prusament Mystic Green Pla Nozzle: 0.4mm Support: No
Print Settings Material: Prusament - Gentleman's Grey Pla / Spectrum Filament - Rusty Copper Pla / EkoMb - Honey Gold Pla Nozzle: 0.4mm Support: Yes (Support on build plate only)
This is an insert for the Cricut Maker tray that helps you organize your tools.
It's a pastry cutter. It's very simple. Height is 6.2 cm, width 5.4 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
The Credit Card Cutlery Kit is a compact culinary companion crafted for convenience and cleverly concealed within a credit card frame. The size of a credit card, the kit fits in your wallet and can be used in an emergency when you forget…
🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7540265970645110038 ℹ Discription: This chibi-style Ghostface figure was custom-designed to blend playful proportions with…
Another in the series of models with movable joints . This time it is Cute octopus . It has eight arms, each with eight movable joints. The head rotates. I recommend printing with a layer height of 0.15 mm, use a more flexible PLA so that…
Just slide your filament cutter in and the filament pieces will no longer bounce all over the room.
Easy to make a cute Cat keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Drawing inspiration from the file in the Remix section, I have thoroughly revamped it for seamless printing on my Prusa Mini+. To enhance functionality, I've incorporated additional reinforcement to stabilize the cutter shape during use,…
It's a pastry cutter. It's very simple. Height is 4.9 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
Small bowl for everyday items in Shiba Inu dog shape :-) Features: Very roomy :-) Very comfy :-) Commercial use: To sell prints of this and my other models, you must be a Retron Print Commercial Club member.
Everybody that can sew should be making masks now.... (written 4/4/2020) If you intend to make many masks, a rigid template for tracing and / or cutting can make things easier and faster. This pattern is for the Olson Mask that we are…
A gingerbread man cookie cutter for the holiday season Print instructions PLA 10% infill .15 mm resolution
HAFC V2 – Hackman Automatic Filament Cutter by Hackman3D Here's a link to get the necessary hardware. No partnership or affiliation involved, but since the price is reasonable, I haven't asked for a commission. HAFC Aliexpress Pack back…
Use brim. A minimalist cutting board stand that keeps your kitchen organized while adding a clean, modern look to your countertop. The recessed slots securely hold both rectangular and round cutting boards. Thanks to the rounded bottom of…
🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…
Cookie cutter Print instructions Layer height 0.35 mm Nozzle 0.4 mm Material PLA Time 3.21 hrs
UPDATES 05-09-2026 - Updated the slider and knob designs for a tighter, more secure fit; the main body and all required screws remain unchanged. EDC Utility Box Cutter A compact and practical everyday carry utility cutter featuring a…
Update 2024 April There are two new G-Code files. First of all they now have the seam on the back. Also I added one with 0,1 mm layers so you have that at hand. Also while being at it I fixed the bases of the models, all STLs now have a…
This is a cute Toothless keychain designed for fans of How to Train Your Dragon . The model features a chibi-style Night Fury in a sitting pose, perfect for attaching to your keys, backpack, or as a small gift. 🕒 Prints in under 1 hour ⚖…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
I recommend supports , for both arms, I use Cura and have used them normal and everywhere remember to public the make to get the prusa points… happy printing.
This cute dinosaur sand mold will bring happiness to your younglings in the sandbox or at the beach. Printing : 0.2mm layer height works well. Scale as you wish and print with the flat side down without supports. ***UPDATE*** 03.08.2023 -…
This is a mini cute version of Thor Hammer (Mjolnir). It fit in 4.5 x 3 x 9 cm. No support needed. If the scale fit your needs, use the gcode file, I selected lightning pattern to get a faster print. It can be upscaled easily to life size…
Easy to make a cute Axolotl having coffee keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Holder for a slightly thicker cutter or scissors on an IKEA Skadis board. I printed this model with PLA with 0.2mm layer height.
Easy to make a cute Cow keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Super easy to print, supportless model. I would highly suggest to print with SILK filaments for best final look.
Changes It's markedly longer + Helps the guide establish a firmer footing + Helps so your hand is less likely to catch on the cardboard; cardboard cuts are no fun It's also taller (more space between the cardboard guide and the grip top)…
A cute lowpoly Godzilla! Quick print with minimal support. Enjoy!
Print Settings Material: Prusament - Royal Blue / Azure - Silk Sand Nozzle: 0.4mm Support: No
8cm cookie cutter and Stamp of Gingerbread house, Can be printed together to save on space on your print bed or seperated.
8cm cookie cutter and Stamp of Gingerbread Man / Person, Can be printed together to save on space on your print bed or seperated.
výska vrstvy 0,30 vypln 0,20 PETG/PLA
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
The warm weather is slowly arriving, Mini Yetis have started retreating to the depths of the freezers and refrigerators, but even so, if we are lucky, we can meet free-roaming specimens. Material: Prusament - Vanilla White Layerheight :…
A remixed version of ihavegerms design to better hold a LED tea light (~38mm width) Credits Cute Cat Ghost remix - Hollow by ihavegerms https://www.printables.com/model/298644-cute-cat-ghost-remix-hollow
This is a portable tiny pill cutter
A two-part cookie cutter for young Son Goku holiday cookies. The first part is an embosser for the face shape. The second part is a shape cutter for easy dough separation. Two parts are designed to work together. Commercial use: To sell…
Easy to make a cute happy Shark keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Easy to make a cute Giraffe keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
This is an Open Source Version of the famous & expensive “Qlocktwo” clock. It works with any ESP8266 and WS2812 LEDs The entire project is meant to be made with a laser cutter. You need the following materials: 4 mm Plywood for the frame,…
Easy to make a cute Owl keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Easy to make a cute Mermaid keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
My wife asked me to print a snowflake cookie cutter. Because the structures are very small I have also made an ejector to it. The cookies look very nice. I have printed the cookie cutter with PLA and a layer thickness of 0.2mm. No support…
I designed one support rail with an edge/guide at the left side (for proper alignment of the cutting mat) and a generic rail without edges to be used in the middle and at right side. Each rail comes with two parts for easy and stable…
Wiper blades stop wiping well when the edges of the rubber blade get rounded off and are not as sharp as new. This can be remedied by cutting a thin strip of the blade off and generating a new sharp edge. Use this tool and the sharpest…
Easy to make a cute Sun and Moon keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Easy to make cute Panda with Heart keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
gingerbread man
This cat sculpture captures the grace and personality of a feline companion. Whether posed sitting, sleeping, or playing, it brings warmth and charm to any shelf or desk. Printing : Suitable for both FDM and resin printers Supports :…
Easy to make a sleeping cute Bat keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
I designed the 3mf file of the larger version in such a way that an LED tealight can fit in the bottom. Print Settings Material: Prusament - Pearl Mouse / Prusament - Royal Blue / Azure - Silk Sand Nozzle: 0.4mm Support: No, If you want…
If you have a Prusa Mini then you probably will experience the short PTFE tube that goes into the heatbreak shrinking and need to replace it with the spare that comes with your Mini. And then that will shrink and you will need to cut your…
Easy to make a cute Octopus keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Easy to make a cute Sloth keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Easy to make a cute Sunflower keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
0.4 nozzle 0.2 layerheight
Tractor cookie cutter print from PLA. It also works on toasted bread. Print from PLA - 15% infill.
Filament: Doesn't Matter Color: Doesn't Matter infill: 15% Supports: No
Small hanger to fix with a very small nails on the side of a Bror Ikea table to hang all the different cutting mate for the Cricut Maker 3. If using the STL file, print it on the side. No need for support, but I recommend to add brim. If…
Easy to make a cute Hedgehog keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Layer Height: 0.15mm Nozzle: 0.4mm Materials used: PETG / PLA Supports needed Yes / recommended Infill: 15% Print times: Total: 3h32m / 2h22m white / 1h6m blue / 4m black Need help? Find me on Discord: https://discord.gg/qanRKqz8xA
Easy to make a cute Lizard keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
A precision tool used by model builders to cut miniature softwood, polystyrene, and other plastic materials. It allows for consistently accurate and duplicate cuts for lengths up to mm. Great for cutting model ship planking, railroad…
These saw guides are designed to help you cut accurate dovetails. Each jig includes all of the angles required to cut both the tails and the pins. You'll need some 8 mm diameter, 3 mm thick magnets (8 per jig), which get superglued into…
I'm not a spy, I swear! This is a pentagonal cookie cutter with 5 diameters (10, 20, 30, 40 and 50mm). It's compatible with my CCC - Canned Cookie Cutters storage solution. Check out my other polygonal cookie cutters on my profile! If you…
It's a pastry cutter. It's very simple. Height is 6.5 cm, width 6.4 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
I couldn't find a good angle grinder disc holder that printed without supports, so I put this together. Print on the flat bottom and it should work without additional supports. Any filament will work, but I use PETG as the default for…
Easy to make a cute Lion keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
A compact attachment that screws onto a Dremel flexi shaft for cutting 5mm rod or tube. Use with a 38mm grinding disc or saw (saw not tested). I use it to cut carbon fibre tube. The two parts print in place without additional support.…
I cut a lot of paper models on the Cricut Maker and I'm constantly changing between the scoring tool and the cutting tool. Putting the unused tool inside the pocket makes it hard to grab, and if it put on the desk when things are messy it…
Easy to make a cute Star keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
This is a decorative pipe flange (escutcheon plate) that fits around a water or drain pipe and conceals the larger diameter hole it goes into. It prints in two parts that fit together for a clean look. Note that the connection is not…
Easy to make a cute Monkey keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Easy to make a cute Cat in a box keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
