63 modeli
This is an insert for the 1.2 printing of Middara Unintentional Malum: Act I. The newest printing comes with an updated insert, however the card wells do not support sleeves and I wanted to have everything stored in a way that supported…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Tamaño perfecto para llavero, no es aparatoso. Las partes estan bien diferenciadas para elegir bien los colores. Modelo impreso con PLA 870 negro y PLA 850 Rojo para mayor resistencia. Perfect size for a keychain, it is not bulky. The…
A headphone cradle for the Hifiman Sundara. Inspired by the Hifiman Shangrila Headphone Stand.
This is the birdarang used by Robin in the Teen Titans show. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Yes Category: Props
Use these to track SP usage when playing Middara - just place an SP counter in the slot matching your current SP. Some command cards have max 4 or max 6 SP, so this model also includes variation with these max values. Print 5 of the 5-SP…
This is a combination RADAR and T-key. Disabled people travelling on the railway need a Radar key for access to accessible toilets at stations. All the ramps used for accessing trains are locked up with T-keys (Carriage, Bell and Heater…
The weapon of choice for Madara Uchiha.
Cool 3d model I made
Slots right into the top band of the headphone.
This playmat will keep all of your cards neatly organized. It has a spot for your adventurer card, all items, item upgrades, disciplines, familiars or companions. It also has a general tray for storing tokens. I have not tested this with…
This is a headband model I made for my Hifiman Anandas, it should work for the Sundara as well and all Hifiman headphones with the same type of Head-strap contraption. You do have to do some disassembly to install it but that should be…
A model of Robin's Birdarang from one of the Batman video games Category: Accessories
So i designed this heavy and bulky Škoda Rapid. Its around 620mm/24.5in long. Uses original type attachment clips to the slash chassis. I just swapped the springs for the GTR and it works enough.. Video
print at 0.2 mm the 3 diferentes models for two metods of dual color printing the complete model, and you put the pause and switch the filament, or te separated pages to print with z offset config. tutorial:
Nádraží Dolní Bousov. Stav před plánovanou rekonstrukcí.
An insert that fits inside the original one, just to separate the different coins, the +10 tokens and the player pieces. Print : Players x4 Tokens10 x1 coins1 x1 coins2 x2 Et voilà!
This is a unique take on the Birdarang - Robin's take on Batman's batarang! Designed to resemble a bird, with a small raised beak and "eye" that can be printed in another color to show its advanced technology! This model as-is is a bit…
A small mounting surface to mount your modmic to your pair of Sundaras. Bonuses Allows avoiding mounting directly to the headphone cups. Allows the mic to swivel slightly left and right. Hardware 2 x M3 16mm flathead screws (I used…
This is an add-on to the awesome insert by WingsOfDaidalos ( https://www.thingiverse.com/thing:4857345 ). I wanted to add a way to store a few more minis, the playmats, and the books all in the box as well. I also slightly modified the…
Birdarang – Titans Series Inspired Cosplay Prop This high-detail 3D model of the Birdarang is inspired by the iconic gear featured in the live-action Titans series. Designed as a sleek, angular throwing weapon with bold red surfaces and…
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
Simple adapter to allow the use of Dara Holsters to Blackhawk Serpa Quick Disconnect Kit. I made 2 versions one flush mount and one extended. your preference on which you use.
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
A remix of the Hadara Card Holder by canadiankorean This one works with sleeved cards. It's just a resize increment of 11.3% that fit my sleeves very well. I use Paladin Sleeves - Arthur model. I print them with 0.1mm layer height to get…
This is a remix of lionpants' original modmic mount, but adjusted for M3 10mm cap head screws Changes to Outer 4mm counterbore for M3 10mm cap head screw Changes to Inner 4mm captured nut (extended from 2.4mm) for M3 nylock nut as opposed…
Use these to track SP usage when playing Middara - just place an SP counter in the slot matching your current SP. The counter includes a groove at the top for square effect tokens such as haste, and holders up front for round ability…
A full set of 3D letters and characters in Candara
A card holder / container / insert for the board game Hadara. Meant to be stored in the box inside a bag for quick and easy setup and card storage. There are different sizes / number of containers included, based on you would like to use…
Thomas Wayne, Jr. , also known as Owlman , is the eldest son of Gotham 's wealthy Wayne family . Motivated by his belief in his parents' mismanagement of their fortune, he orchestrated their murder, along with that of his brother Bruce ,…
Token and cards holder for the board game Middara using famous potato chips covers. Different depth for each kind of token to match quantity. Card separator from the Middara files section of boardgamegeek.com
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 200x112.09mm in size You may print at higher layer heights below the Min Depth of 0.52mm The Max Depth is 2.3mm and the Actual Depth is 2.3mm…
A highly detailed collectible bust of Madara Uchiha, the legendary leader of the Uchiha clan and one of the primary antagonists from the anime Naruto . The model captures his imposing, confident expression and iconic long, wild hair. He…
A simple card holder that keeps the cards neatly in place. Mainly created to ensure the Phase B cards are stacked without showing the next card underneath.
This model can be used for both storing the bases as well as for removing them from the figures by placing the figure on top of a pole and pushing the base down. Use the two long poles for the red and purple bases, one short pole for the…
A colony / military tiles holder for Hadara. Works well in the box, as well as put on the table for quick setup. The lid is optional and just there for some extra protection in the box. The lid is not a tight fit, just protective. Printed…
This print uses 3 unique filaments Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Jade White At layer #24 (2mm) swap to Red for the rest.
I was looking for a solution to track the stats on my characters without having to add up everything each time. There's an awesome player aid ( https://boardgamegeek.com/filepage/223409/character-sheet-player-aid ) that I wanted to use.…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black red 11 yellow 16 white 21
Detailed 3D printable Chibi Madara Uchiha From Naruto With Gunbai War Fan figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
🔗 https://www.patreon.com/c/toadstoolweaver Most of my files are FREE, thanks to the incredible support of my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking some nice extras: ✨ Early access…
Rediseño de las patas de la Foldarap publicada en github, https://github.com/isidorogv/foldarap_escalable , para perfiles frontales 2040 y 2020 superior. Perforaciones de M5. Las uniones de los perfiles 2040 deben roscarse en propio…
One of my motor drivers tends to report overheating. I made an airflow guide to hopefully cool that driver down. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: Vase mode…
Adjustable Z endstop mount for the FoldaRap 1.1. Source available at github . Instructions The endstop is mounted with M2.5 screws and a M3 nut needs to be inserted in the top piece. Category: 3D Printer Parts
DARAKO Smart / Future Wallet Replacement Bill Compartment Better than the original! The bill compartment of my wallet broke (as is probably the case for many others), so I modeled the part to make a replacement. I printed it with…
This is a construction kit for the assembly of an Escher dodecahedral polyknot. Please be very careful. It has sharp points. Not suitable for children. Recommendations. Rod: z-axis setting = 4.0mm Pentagonal Tile: z-axis setting= 4.0mm…
Ce modèle est un prototype développé par SailLab Engineering , présenté ici à titre de showcase . Il s’agit d’une pièce conçue pour des tests internes, des essais terrain ou l’intégration dans un projet spécifique. Les fichiers associés…
Detailed 3D printable Madara Ten Tails figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: https://www.patreon.com/Marjers…
Replacement strap made from TPU. Modeled by hand using my original (damaged) leather strap as a template. This project includes the main body STL for the strap and a modifier component. You can use the modifier component to adjust the…
DARAKO Smart / Future Wallet Replacement Bill Compartment Better than the original! The bill compartment of my wallet broke (as is probably the case for many others), so I modeled the part to make a replacement. I printed it with…
Simple adapter to allow the use of Dara Holsters to Blackhawk Serpa Quick Disconnect Kit. I made 2 versions one flush mount and one extended. your preference on which you use.
Love this design? 💖 If you enjoy this aesthetic, please consider supporting my new project, KamiMarks ! While this design looks good here, if you want a printed one (that looks much better) , you can find them at KamiMarks. And it's not…
3D printable topographic miniature of Jakarta, Bundaran HI - 🇮🇩 Indonesia Capture the beauty of Jakarta, Bundaran HI 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo…
The model is printed in multiple parts, no painting necessary aside from the blades (stencils Included to help paint the stripes). ALL MANNIKS3D designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell…
