Liczymy pasujące modele…
I designed this enclosure to mount it to my MechaPlus ProBasic 06-05 CNC Router . But it can be used for any CNC Machine. I deliberately left out the Stepper drivers which are in a separate enclosure that came with the machine. It is…
Wydruk około 7,72 €–9,44 € nettoWstępna wycena jednego wariantu
Very simple model. Printed with glow-in-the-dark PETG for flexibility and visibility. Snug fit that does not fall off, so no further retainers are necessary. Practical for outdoor operations, only around 6-7g extra weight.
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I can't understand it, but there are people just having one set of dice they use to play. So the regular EDDC boxes are too big. So I made a slim version holding one set of dice nicely divided. The dividers are not evenly spaced, so there…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Remixed from https://www.printables.com/model/254243-every-day-dice-carry-eddc-box-slim. I printed with a 5mm brim, and ironing in the label region.
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
OptimumTech sparked some really cool builds around the FLT-80 reservoir, but the inverted holder relied heavily on having a straight connection to the GPU. I did designed a new holder that holds the FLT right side up, resulting in a…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Project on GitHub Display 128X64 I2C SSD1306 DC Power Jack 5.5 x 2.1mm Print instructions Front and Back I printed with ABS plastic. Bottom and Top I printed with PETG plastic.
Hi all, this is a simple and compact case for the fantastic ATU100 antenna tuner kindly made open source by N7DDC. I've provided two versions, for different antenna connector diameters, but also all source files so you can tweak to your…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Want a bcar, but don't want to shell out for bearings? Do you have very specific requirements for what your blaster needs to optimize accuracy? This is a fully printable bcar, or dcar, that you can customize yourself using OpenSCAD. Just…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Desktop case to house DDCS V3.1 CNC controller Prints as 2 parts, glue together. Optional cable grip. Very sturdy in normal PLA.
This is my own 3D model of custom base and cover for the above named pump. It has two tunnels with top and front inlet and single front outlet. The design was measured on the original pump but tunnels have larger diameters for higher…
The DDCS V4.1 comes with four holes in side to mount it into the panel. I just needed a box to hang off the side of my mill while putting the rest of electronics under the mill. There is a drawing provided if you need to modify it. Parts…
I can't understand it, but there are people just having one set of dice they use to play. So the regular EDDC boxes are too big. So I made a slim version holding one set of dice nicely. It holds dice slightly bigger then standard dice. So…
I needed space for two business cards (private and job) and some room for dice or other similar small things. Thumb drives might count as dice in this case. A clip will hold the cards inside the shells to keep everything organized. There…
This is a case for 3.5-inch HDDs. I installed a vertical model in my NAS. They come in a variety of sizes, from wide to tall. There are holes on the side so you can secure it with screws.
EDDC design from wuerfel with various designs cut into them. I wanted to add some variation for different classes. So far I've only got a sword but I have plans for many more. Add a stop in your Gcode after the first layer to do a…
1:1 to the EK Velocity DDC Pump-Reservoir-Water Pump Intel.
Evolution is about to come to the EDDC box. The model is now around for quite a while and its time for an update. Whats new: The first major change comes to the hinges and closing mechanism. Print in place is nice, but the horizontal…
This print uses 0.20 mm layer inlay with single extruder multi material setup. 1. Go to Printers > Capabilities > Extruders 2. Select 2 extruders and check Single Extruder Multi Materials 3. Go to Print Settings > Wipe Tower 4. Go to…
This print uses 0.20 mm layer inlay with single extruder multi material setup. 1. Go to Printers > Capabilities > Extruders 2. Select 2 extruders and check Single Extruder Multi Materials 3. Go to Print Settings > Wipe Tower 4. Go to…
Many thanks to @wuerfel for the original model!
Many thanks to @wuerfel for the original model!
Many thanks to @wuerfel for the original model!
Many thanks to @wuerfel for the original model!
I have printed these in both PLA and PETG with no issues. They are a friction fit in the EDDC box found here:
Sized down the holes for the magnets to fit the 5mm x 2.75mm magnets I had on hand
This print uses 0.20 mm layer inlay with single extruder multi material setup. 1. Go to Printers > Capabilities > Extruders 2. Select 2 extruders and check Single Extruder Multi Materials 3. Go to Print Settings > Wipe Tower 4. Go to…
Instructions can be found on the GitHub repo
A case designed to be used with the interface board for the DB25 connector for DDCSV 3.1 CNC Controller. To make more user-friendly. It's made of the three parts, a top, bot and a spacer. There is a image explaining how to mount and what…
This is a variation of one of the Inserts for the EDDC box that allows for two minis and two sets of dice.
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
I can't understand it, but there are people just having one set of dice they use to play. So the regular EDDC boxes are too big. So I made a slim version holding one set of dice nicely divided. The dividers are not evenly spaced, so there…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
I needed space for two business cards (private and job) and some room for dice or other similar small things. Thumb drives might count as dice in this case. A clip will hold the cards inside the shells to keep everything organized. There…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
