Liczymy pasujące modele…
Cap for one of Amazons most sold deburring tools: the full metal version from Vastools. Protect yourself and other items from damage by the sharp knive of the deburring tool Very simple model, but with a very nice hold on the tool.
I wanted my caddy for a deburring tool to be stackable, and make it easy to grab the tool out of the bin. None of the existing holders fit the bill, so I made my own! This one is good enough for me, but on revision I would: Increase the…
Supporto per parete attrezzata HSW Honeycomb Storage Wall per Chamfer/Deburring Tool per la ricarica delle munizioni. lo strumento nella foto è di produzione RCBS. Il supporto si aggancia alla parete con l'aggiunta di un inserto standard…
Notes To use, insert a 0.125" shank deburring blade into the end of the handle until the groove in the blade lines up with the hole in the side of the handle. Press the clip into the hole until it snaps into place around the blade.…
Added deburring tool slot, blade holder, and a small tray for little bits and bobs. Excellent model. .2 Layer height, hybrid tree support
Shortened handle to let it fit associated storage box. Also adjusted the diameter so the metal tool would go into handle. Did a double adjustment of the ring so it would more easily screw onto handle Print with PETG on side with 6-10 mm…
A carrying/storage case for deburring tool. printed in bright red to make it easy to find. Have to use razor knife to trim connecting pins and back side of pin opening slot. Use pliers to apple pressure evenly and slowly to get it to…
Holder for the Ruko Unigrat deburring tool. Based on a holder that I found which fits the Ikea Skadis, now fits the Honeycomb Storage Wall. Print with supports for the holder. Unfortunately I had to make it this way since the Ruko…
Simple holder to store the NOGA deburring tool directly on the Elegoo Centauri Carbon using an existing case screw.
A quick remix, adding 10 mm to the handle length. Also centerd the tool holder to fit better.
Parkside deburring tool case. It can hold up to 11 blades, one of which is installed in the tool itself, and the lid is held in place by friction.
Simple storage box for a deburring tool and 9 inserts with magnets to hold covers together (4 mm r x 2.5 mm h magnets to hold the parts). For better results: - Variable layer height: Quality / Speed = 0.00, Smooth = 10
Gridfinity bin holder for AFA Tooling Debarring Tool. For use with hexagonal handled deburring tool.
Gridfinity bin to hold the Maker Supply Deburring tool (professional trimming tool kit) . Maker's Supply Professional Trimming Tool Kit | Bambu Lab UK Store
Original instructions kept the same: Description Based on @Whity's design , I've designed an insert to hold steady and secure the tool itself and the spare holder as well. Options The .step file included multiple options to print.: You…
A deburring tool holder for the Honeycomb Storage System. The difference with other versions is that this doesn't need supports to print perfectly. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Category: Tool Holders…
Remix of the gridfinity deburring tool bin by Prints and Automation.
This is a remix of Lndnny's deburring tool case, edited to fit a Libration extended handle deburring tool (150 mm x 17 mm) and any other compatible models. Please check the dimensions of your tool before printing! Highly recommended to…
I cooked this Gridfinity holder up for my own workbench organization, even though I’m not great with Fusion 360! It holds my Fowler 6" AutoCal digital caliper and AFA Tooling BS1010 deburring tool neatly stored and ready to grab whenever…
A simple holder for 3.2mm deburring blades. The handle is one piece. The tip is split by a small slot, so the blade can be pushed in and will snap in place. The ring keeps the two halves together. Update dec 25: Added new model files for…
It is made for pegboards with 15 mm hole pitch. It should fit the pictured common deburring tool and one spare blade.
Pegboard hanger to hold a deburring tool. Fits standard 1" spaced pegboard
Because i bought a set of some different blades but just one handle, i made my own handles. Print Chip The 2 halfs are mirrored. Print both without support. Additional Parts A deburring tool blade (e.g. BS1010, BS1018, BS1012, BK3010, …)…
Mount for a generic deburring tool for IKEA Skådis pegboards. It holds the tool plus up to 12 replacement blads. It can be printed upside down without using any supports at all. I printed it with 0.2 mm layer height, 15% gyroid infill and…
There are some similar models to this, but I couldn't find one that could fit the holder and also the blades in horizontal position without wasting too much space (this one only requires a single additional square). The blades could be…
Remixed Deburringtool Holder on Multiboard from @Chris3DPrints for slimmer 12&14mm Deburrer I have attached the STL and STEP files incase you want to modify it.
Credit to @darious_461845 and @threatdisplay
Remix of this model , allowing for the tool to fit inside a 1x4 Gridfinity module. Since other modules can't be stacked on top of this one, I've used the same flat top design as these gridfinity modules , as well as matching the height so…
Stand for deburring tool you can find on AliExpress with spare knives included for around 3-5$. This tool is great for removing sharp edges of your prints, especially after the brim has been removed. I hate those side mounted stands…
A practical holder for the deburring tool from "Meistergriff". Most deburring tools from other manufacturers will likely fit as well, but they have not been tested. Enjoy!
Cap for one of Amazons most sold deburring tools: the full metal version from Vastools. Protect yourself and other items from damage by the sharp knive of the deburring tool Very simple model, but with a very nice hold on the tool.
I look for efficient designs and, while here are many deburring tool holders already available, none met my criteria. I wanted blade storage, but towards the wall so I'd be less likely to accidently grab a blade while retrieving the tool.…
Designed a mount to fit my Performax deburring tool that is compatible with the Honeycomb Storage Wall system. It attaches to a single plug with an M3x10 bolt and nut. May need to scale up or down to fit other brands. Link to the storage…
This is a model for a generic Deburring Tool holder for the Honeycomb Storage Wall System. It also holds the spare blades.
Here is a simple holder for both items… the arms are designed to be flexivble so you can push the solder scroll trough the slot
Remix of: https://www.printables.com/model/501528-honeycomb-storage-wall-afa-deburring-tool-holder-l I wanted a simple holder for my AFA deburring tool. I made two versions: One with 1 insert and one with 2 inserts so you can choose how…
I made this gridfinity holder for a performax Deburring tool I printed it in MH build white PLA (not sponsored) Check out the timelapse I made here Hope you enjoy it! Thanks, Design lab 3d
Remix of the tool created by NoobAmStewer. Modified the handle with hex shape to prevent the tool from rolling around. Created new blade holding blocks that fit much better. It prints correctly in my Elegoo Neptune 4 Plus. Note: The cap…
I have a deburring and chamfer tool from RIDGID SCANDINAVIA A/S (catalog number 34965R). I made a PETG holder that allows me to mount it and use it with a common drill. It is mounted on a M8 screw.
4 by 2 Gridfinity box for CNC Kitchen and AFA deburring tools. Also includes 14 holes for extra blades.
Remixed your nice model, to make the Tool Version of CGBoom fit in.
An updated version of Chris3DPrints' Deburring Tool Holder for Multiboard, where I changed the hole sizes to fit my deburring tool, then I added a pattern around the circumference of the body and added a fillet. I also made - uploaded - a…
The Insert - Top was remixed because my 3D printer is not very precise and the clip hole is 3.4mm big, so I added a test print for you to test the clip. if it's too loose this model is not for you.
A gridfinity holder for a generic hexagonal deburring tool that's 4x1x4 units and stackable. The deburring tool slot can be up to 145mm long by 15mm wide. This variant fits better in my setup. The gridfinity template this was made with…
A 2x1 organizer tool bin compatible with the amazing (although unfinished...) Gridfinity Refined system by @grizzie17. Features: One slot for a standard X-Acto knife in a stable fashion, fully protecting the blade and not making the bin…
This is holder for Parkside deburring tool with blades and scalpel.
Holder for cheap-o deburring tool from Amazon Sized for a slight interference fit, may need to thicken a wall depending on actual tool size. Mine is 12.52mm across the flats.…
Deburring tool holder for a hexagon wall, I made the slot for the tool a little big so that a variety of deburring tools can fit
Holder for Mini Flush/Wire Cutters and Deburring Tool that fits on Ankermake M5C crossbeam. Dimensions: Deburring Tool slot - 22mm ⌀ and 45mm deep Cutters slot - fits those originally supplied with printer by Ankermake
Gridfinity deburring tool holder. Designed for a 14.5cm handle length, see attached picture. Spare replacements blades can be stored horizontally and vertically. There are two variances of the holder: One variance that provides storage…
Printed in .28 eSun pla+ ID hole = 13mm, OD 18mm, 45mm Deep
Diameter for the tool slot is 14,4 mm, for the blades 4 mm. You may want to use a drop of CA glue to secure the hook, depending on your filament and printer settings.
The original version of this model only allowed for the deburring tool but there's tons more room for an xacto / hobby knife. Although it's a snug fit, it hold both tools and includes spots for knife blades and deburring blades. I may…
hi, i designed this container for deburring tool that i bought on amazon.
Gridfinity bin to store a 13 - 15 mm diameter deburring tool. Kept the height to a minimum and made it stackable. There is a pocket at one end to allow you to press down on the tool or bit for easy removal from the tray. The wavy texture…
A 3x1x6 Units Gridfinity Base for Noga SP1010 Deburring Set Holes are already with offset. If your printer tolerances are out of way and the pins don't fit, a 3.5mm (ideally 3.4mm) drill bit should do the job.
This is a 4x1x3 Gridfinity bin holding a CNC Kitchen Deburring tool. I printed it with a .4mm nozzle and 0.25mm layer height. Print it with your default Gridfinity settings, it should work fine 🙂 Find more information about Gridfinity…
Gridfinity stand for deburring tools. OnShape model: https://cad.onshape.com/documents/46c6e40178235872c3225fe4/w/b7105410c91564c4ce789fa4/e/7ae04d11ae55893cd16ebb66
A 1x1 Gridfinity bin for holding a deburring tool and 6 attachments. The deburring tool that this was designed for is as per the below link: https://amzn.asia/d/hMfowqN
This is a deburring blade holder for a multi tool. Needs no supports when printing.
any filament, any infill, any layer height. looks good in white tho.
Gridfinity Deburring Tool holder with storage for 16 bits. It fits a standard 42mm gridfinity grid. It takes up 1x4 grids. 0.4 nozzle Uses 52g of filament and prints in 1h42m.
Update 21 Jan 2026: The round handled one in the photos rolled off of my printer and fell on the floor and the nose cracked. It was still functional, but I decided to reprint because personally I much prefer the hex handle ergonomics, and…
for the HOZAN K-35 (original of cheap deburring tools in Aliexpress) https://www.hozan.co.jp/corp/g/g4035/ Holder Diameter : 21.8 mm ホーザン K-35用のGridfinityビンです。 Printables上にあるものは殆どすべてコピー品向けでちゃんと寸法が合うものがなかったので、 近いものをリミックスしました。…
Have you ever finished an all night print and you ran out of time to finish it up before going to work, so you took it to work along with your tools? Well, I do all the time and i didnt want to take my deburring tool with me every time.…
Standard holders didn’t quite work, so I designed and printed my own stand for a deburring tool . ✅ Stable and secure ✅ Quick access ✅ Easy to adapt for different handle sizes A simple project, but it made the workspace cleaner and more…
The original model does not fit on the A1 Mini print bed, because the A1 mini only fits at max 4x4 Gridfinity units. So I got rid of one of the two blade containers, moved some things around, remodelled the xacto spare blade box slot with…
I ended up filling in the end of the 5mm or so to fit my specific tool (voltrish 11-Blade Deburring Tool - https://a.co/d/aUKniwD ) as well as adding 2 more magnet holes to the cutter end to ensure the tool stays in place even if flipped…
Dear Gentlemen, I took the great idea of Mr. Timo, thanks to share it, please have a look of his item https://www.thingiverse.com/thing:4318301 and I made a new design based on my needs, the parts are not interchangeable with his project,…
Simple to print cap (Diameter M20x2) for a Deburring tool. Type: Vargus Shaviv
It is a holder for honeycomb wall system that easily can hold a classic deburring tool or a glue stick.
Minimalistic Deburring Tool Holder – Rail System Mount Simple and functional tool holder designed to fit a deburring tool with a 9.5mm head. Designed for mounting onto a pre-existing rail system. 🧵 Details: Fits tools with ~9.5mm head…
Small Ergonomic Handle for Deburring Tool - Deburrer Tool - Mini sbavatore Optimized profile for better resistance and ease of printing Optimized filament usage Recommended filaments: PETG - ASA - ABS - PLA+ - Engineering Filaments Tool…
Tool for chamfering HDPE pipes blade size - 52-53 mm Инструмент для снятия фаски с труб ПНД
Have you seen those cheap Chinese E3D-compatible nozzles? If you look at one in a micrsocope you will see pits and burrs on the tip. Well, I thought I'd make something to help me polish those nozzle tips, and make the nozzles actually…
A specialized Gridfinity holder for two tools essential to 3D printing – digitial caliper and deburring tool – for those who like to make use of every inch of space in their drawer. New to 3D printing, I decided my first printing project…
Hi! I use my deburring tool frequently with my printer and wanted a holster to keep it within reach when removing pieces from the print. Here it is. I printed it vertically in the same orientation that it should hang in, without supports.…
This cap perfectly fits bstolk's Deburring Tool Handle while using less than five grams of material. It fully encompasses an affixed blade while being able to slide on and off with ease. Print orientation should be as modeled, with the…
This is a stand for a deburring tool I got recently, the main hole is 20mm Theres 12 3.5mm slots for blades and 6x holes on the base for 6x2mm magnets
This 3D-printed deburring tool holder is specifically designed to safely and neatly store deburring tools. It is printed using durable PLA or PETG material, combining strength with practical use in a workshop environment. Thanks to its…
1x1 Gridfinity bin sized to hold the Husky brand of deburring tool (or any similar sized tool with an octagonal body) and four spare blades. Has magnet holes at the bottom.
I wanted my caddy for a deburring tool to be stackable, and make it easy to grab the tool out of the bin. None of the existing holders fit the bill, so I made my own! This one is good enough for me, but on revision I would: Increase the…
HSW holder for deburring tool Nuoda NG1000 with 9 blades. You need an HSW empty insert (Files => Fasteners and parts for attaching hooks and objects => insert-empty.stl). Print settings : Size nozzle : 0.4 Layer Height: 0.2 Infill: 25 %…
Same tool holder as the original, just with a flat 3 millimeter depression to put 3M dual Lock Velcro on the back.
