12 551 modeli
Nice improvement on my previous low poly cat model. Made in Blender. Commercial Use: https://cults3d.com/:1308071 $1 Donation: https://cults3d.com/:1308029
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
A very nice F1 logo for your desk or shelf. The logo and its stand are designed separately, so you can print it in 2 colors. The parts are snap-on in order not to have any problems with alignment. But my advice is to glue the pieces…
Wydruk około 2,15 €–2,62 € nettoWstępna wycena jednego wariantu
A set of leaf coasters and decorative holders. These coasters will catch the condensation from your glass and you can use it to water your plants! Nothing quite like free water, right? When you're done with the coaster, plug it back into…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
Edit 27. 12. 2023 Now you can also print a napkin holder with these gnomes! https://www.printables.com/cs/model/695300-napnik-holder-with-gnome Edit 10. 12. 2023 Thank you so much for all the downloads! I was so happy for the first 100 in…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Christmas bulb. I optimized the model, there is more support in the pictures than would be necessary and I removed part of the fill. Add feedback or pictures for comment :-)
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
Decorative Gothic Dragon Door Knocker ** THIS IS NOT FUNCTIONAL ** no moving door knocking mechanism. it just looks like it.
Wydruk około 7,44 €–9,09 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Wydruk około 5,63 €–6,88 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Wydruk około 17,39 €–21,26 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (organic/tree support) Scale it as you like :)
Wydruk około 16,34 €–19,98 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Wydruk około 7,33 €–8,96 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Wydruk około 18,09 €–22,11 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Product page here: https://www2.hm.com/en_us/productpage.0812790001.html Nozzle: 0.4-1.0mm Layer: 0.2-0.8 (Recommended) No Supports needed Scale it as you like :)
Wydruk około 10,53 €–12,87 € nettoWstępna wycena jednego wariantu
We are for sure big fans of crystal structures here! So… Here is our newest model inspired by the great growths of Moon Crystals! We hope you enjoy it! Used Filament: This model was printed using ROSA 3D PLA-Silk Navy Blue The ROSA 3D…
Wydruk około 9,83 €–12,01 € nettoWstępna wycena jednego wariantu
dekorace k vytvoření duchařské atmosféry
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.3-0.6mm (Recommended) Infill 5% No supports needed Scale it as you like :)
Wydruk około 15,69 €–19,17 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 0-2% Perimeters 1 No Supports needed Scale it as you like :)
Wydruk około 3,29 €–4,02 € nettoWstępna wycena jednego wariantu
What is more romantic/special then a personal (handwritten) message to a loved one? Use this envelope to deliver such message (or small gift) . The accompanying ones have an added decoration in the shape of a heart or rose as an…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
🫧🪸🐚 Ahh… Bikini Bottom: Ze Home of Beloved Aquatic Cgeatures 🧽𓇼🐙 🐿 🦀 There are plenty of pineapples, moais and rocks under the sea—you can find those anywhere. But… have you been to the actual Bikini Bottom? Print this whimsical…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Adjust size and thickness as required. Printed in batches of 5 in different autumn colours..
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Some new fireworks are in the sky! Falling stars and such are to be seen! So, we wish you all a Happy New Year already! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was so nice to send us some samples…
Wydruk około 3,63 €–4,43 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Work in progress Use 6=9 Nozzle: 0.4 Layer: 0.2-0.24mm (Recommended) No Supports needed No Brim needed Scale it as you like :)
Wydruk około 9,33 €–11,41 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 15,81 €–19,32 € nettoWstępna wycena jednego wariantu
While thinking of new ideas we realized that we never made a Flower flowerpot! So... We made one! We hope you like it! Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send…
Wydruk około 2,78 €–3,39 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :)
Wydruk około 1,44 €–1,75 € nettoWstępna wycena jednego wariantu
Silhouette wall decoration. 16,3cm x 16,3cm sp.2mm
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
This is a blank Decora wallplate insert, to cover an empty hole after you remove a device like a switch or plug. Design notes: The depth of the front part of the insert should bring it into near-flush alignment with your faceplate. I've…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Spiral Mode/Vase Mode You can print it with: Nozzle 0.4/0.6/0.8mm (You can print 0.8mm line width with 0.4/0.6 mm nozzle) Layer Height 0.2mm/0.4mm (Recommended) Bottom Layers 4-10 Layers Scale it as you like :) happy fall season
Wydruk około 1,07 €–1,30 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.3-0.6mm (Recommended) Infill 5% No supports needed Scale it as you like :)
Wydruk około 18,98 €–23,20 € nettoWstępna wycena jednego wariantu
Płyta bazowa LEGO w różnych rozmiarach jest gładka od spodu, dzięki czemu można ją przykleić do dowolnej powierzchni. Rozmiary płyty bazowej: 12x8 6x3 6x4 5x4 5x3 Oczywiście na płytce można zbudować dowolna rzecz. Wypusty zostały tak…
Wydruk około 3,50 €–4,28 € nettoWstępna wycena jednego wariantu
This is a great dragon's head model by printedobsession. This will look amazing on any display, from a desk to a shelf. I RECOMMEND USING YOUR OWN SLICER SETTINGS. This is a very complex print. I recommend (for fdm printers) scaling it…
Wydruk około 35,58 €–43,48 € nettoWstępna wycena jednego wariantu
Wall art consisting of three types of succulent Suitable as home decoration All models is scalable for your needs. Printing informations: No supports Printing very good with any filament 0,15 - 0,2 mm layer height 0,4 mm noozle Happy…
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
This is an eagle to be used as a decoration for a wall or whatever you like. if you have a creality 500 you can make it really big. normally you do not need raft, but depends on your bed adesion. I have put also the gcode for creality…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
Horseshoe with Horse Head – wall decoration A decorative horseshoe featuring a realistically detailed horse head, inspired by classic equestrian motifs and rustic design. This model works perfectly as a wall decoration for stables,…
Wydruk około 3,56 €–4,35 € nettoWstępna wycena jednego wariantu
This was designed as a greetings card but also suitable as a decoration. The photo shows it printed using Prusament Galaxy Black PLA and a generic white PLA also bought from the Prusa shop. I set a manual colour change using PrusaSlicer.
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
This is a beautiful looking christmas tree ornament, perfect for christmas and winter time. Thank you for your interest! Feel free to share your prints or print files with the community! Design by pmoews, downloaded from Thingiverse here:…
Wydruk około 3,04 €–3,72 € nettoWstępna wycena jednego wariantu
Bulldog stilizzato silhouette wall decoration. Sono presenti 2 file, uno intero, mentre l'altro è sezionato e ingrandito del 170%
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 5,08 €–6,21 € nettoWstępna wycena jednego wariantu
A waffle structure bowl! Easy to assemble and looks great in any place - can store decorative balls or fruits - depends on your liking. Print information: Recommended using a lower layer hight (0.15/0.2mm) and a smaller nozzle (0.4/0.3mm)…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Wydruk około 9,16 €–11,19 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
Bold Lamborghini-inspired hood lines and vents. Roomborghini Available in two versions: Full model or half STL – for large printers. Split into 4 pieces – for easier printing on smaller build plates. Pre-sliced G-code file included…
Wydruk około 8,85 €–10,82 € nettoWstępna wycena jednego wariantu
The Halloween decoration can be printed in a single color or, as in my example, in two colors. To achieve this, I paused the print before the final layers (the “Happy Halloween” lettering) and changed the filament color. - Die…
Wydruk około 2,90 €–3,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
"Woman of flowers" 2D Wall decoration Use only one perimeter for optimal results.
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 10,39 €–12,70 € nettoWstępna wycena jednego wariantu
You do not know what to print for Halloween? How about this Halloween pumpkin with lid, big enough for one or 2 LED tea lights. (ex: https://amzn.eu/d/cHnOr0r) Dimensions: Diameter approx. 101.20 mm Height approx: 90.06 mm Printing:…
Wydruk około 7,43 €–9,08 € nettoWstępna wycena jednego wariantu
Designed this for a friend, not much to say about it. Adjust the size to your liking and hit print. The sharp tips might need a (partial) brim or mouse ears depending on how good your bed adhesion is.
Wydruk około 2,09 €–2,56 € nettoWstępna wycena jednego wariantu
Two color swap options to choose from “Whole Body” version: To achieve a two color butterfly as shown in the tile picture., change filament after half of the layers to print. “Wings & Body separated ” version: Print the body parts in a…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
This is an Alice in Wonderland wall decoration. I found the original design by simik191 and absolutely loved the design, however I didn't need a lamp and have no experience with wiring electronics. So, I decided to turn it into a wall…
Wydruk około 4,44 €–5,43 € nettoWstępna wycena jednego wariantu
Dragon Decoration / Filigree
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 14,93 €–18,25 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 15,17 €–18,54 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
Christmas Krampus Plaque Decoration / Tree Ornament
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 7,70 €–9,41 € nettoWstępna wycena jednego wariantu
Here is a model of a large linked chain sized enough it can be worn as a necklace or used as a decoration. For printing, you will most likely need to add a brim for printing stability. A 3mm brim with 0.2 gap seemed to work fine. Also,…
Wydruk około 11,56 €–14,12 € nettoWstępna wycena jednego wariantu
"Dancing Woman" 2D Wall decoration Use only one perimeter for optimal results.
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% No supports needed Scale it as you like :)
Wydruk około 4,83 €–5,91 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) No Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Wydruk około 29,52 €–36,07 € nettoWstępna wycena jednego wariantu
This entire project is 5 parts, a tile of each of the 4 nations and a frame to place the tiles in a grid. The tiles will fit into the grid and stay without help, but using something like super glue is recommended to make it more secure.…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Add a some small Cylinders as Negative Volume for draining Print upside down Scale it as you like :)
Wydruk około 4,45 €–5,43 € nettoWstępna wycena jednego wariantu
A new design inspired by the illusion of movement form slide projectors. No matter how you rotate it, it will always look the same. Used Filament: This model was printed using Aircraft Grey Matt PLA from FormFutura The FormFutura team was…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena jednego wariantu
This is a sweet little decoration figure of a santa, and is perfect as a give-away or a little gift for christmas. Thank you for your interest! Feel free to share your prints or print files with the community! Design by ejo, downloaded…
Wydruk około 2,99 €–3,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cute looking Bunny for Easter or room decor.
Wydruk około 3,66 €–4,48 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) No Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Wydruk około 21,78 €–26,62 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :)
Wydruk około 10,30 €–12,58 € nettoWstępna wycena jednego wariantu
Wydruk około 3,04 €–3,71 € nettoWstępna wycena jednego wariantu
Bringing timeless elegance to your garden or indoor spaces, I've designed the this classic curved flower pot, drawing inspiration from the grandeur of Roman vases. This model focuses on the wide and elegant silhouette that makes a…
Wydruk około 24,86 €–30,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🌼 Narcissus Flower Decor – A stylish take on the iconic spring flower, perfect for minimalist interiors or as a gift. Use tree supports on build plate + fuzzy skin on outer walls. ✅ Height: 150 mm – elegant and eye-catching ✅ Complements…
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
This was designed as a greetings card but also suitable as a decoration. The photo shows it printed using Prusament Galaxy Black PLA and a generic white PLA also bought from the Prusa shop. I set a manual colour change using PrusaSlicer.
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 15% Add a some small Cylinders as Negative Volume for draining No Supports needed Scale it as you like :)
Wydruk około 5,50 €–6,73 € nettoWstępna wycena jednego wariantu
Fascinating Christmas decoration that stands out best in the window. Printed from transparent PETG, it looks like stained glass. Print instructions The decoration is printed on a standard Prusa i3 MK3S printer with one extruder and…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 3D model is a pumpkin-shaped flower vase, ideal for festive Halloween decoration or general decorative purposes. The design blends modern and festive styles, making it perfect for adding a unique touch to any space. No supports…
Wydruk około 9,75 €–11,91 € nettoWstępna wycena jednego wariantu
Vánoční dekorace - drak. Rozměry cca 79 x 82 x 2 mm.
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Decoration de noel bicolore : maison - Two-tone Christmas decoration : house
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.24 (Recommended) supports needed Model for 3mm and 4mm mirror thickness Scale it as you like :)
Wydruk około 3,71 €–4,53 € nettoWstępna wycena jednego wariantu
Decorative hen in a flowerpot. I used a bamboo stick from Chinese food to stick. Dekorativní slepička do květníku. Pro zapíchnutí jsem použil bambusovou tyčku z čínského jídla.
Wydruk około 2,47 €–3,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Decoration that stands out best in the window. Printed from transparent PETG, it looks like stained glass. Print instructions The decoration is printed on a standard Prusa i3 MK3S printer with one extruder and without MMU. The colors are…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Wydruk około 11,51 €–14,06 € nettoWstępna wycena jednego wariantu
Giraffe wall art or decoration with geometric design You can also use it as a coaster under your cup or a key chain Easy to print Model is scalable for your needs Printing informations: No supports Printing very good with any filament…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
A snowflake which can be attached to a window with a suction cup.
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
We remixed this outlet cover to match the decor in our home. It would be perfect for a gaming room or a retro or vintage room. Print Queen side up with supports – I like snug supports for this. If you are worried about finish, depending…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
Ho disegnato la Lamborghini Huracan come decorazione murale. Personalmente ho usato un pla nero su muro bianco, l'effetto è meraviglioso.
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…
Wydruk około 3,85 €–4,71 € nettoWstępna wycena jednego wariantu
I took this original model and changed it a bit to allow for LEDs and wiring. I had to create holes for the LEDs, for the switch, and then I hollowed out the bottom to provide space to hide the wires. The bottom has a little tongue that…
Wydruk około 3,19 €–3,90 € nettoWstępna wycena jednego wariantu
Woven Basket – Versatile Decoration Explore our beautifully designed woven basket, the perfect decorative accessory for your home. Whether you use it as an elegant bowl for keys, jewelry, or other small essentials, this basket combines…
Wydruk około 3,97 €–4,85 € nettoWstępna wycena jednego wariantu
3.5" by 2.5" Backpack hanger
Wydruk około 3,17 €–3,88 € nettoWstępna wycena jednego wariantu
Weihnachtsdekoration Christi Geburt Ein einfach auszudruckendes Weihnachtsmotiv in Form eines Sterns zum Schmücken des Weihnachtsbaums. Ich habe die Form des Sterns als Modifizierer verwendet, um nur das Sternenmuster zu drucken. Der…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 15% Add a some small Cylinders as Negative Volume for draining No Supports needed Scale it as you like :)
Wydruk około 11,99 €–14,66 € nettoWstępna wycena jednego wariantu
The Gen2 system (by Jerrari ) combined with Gridfinity is a flexible storage system. Why waste space when you can use it. So I added an extra column Gridfinity Half Grid (by HuMa ) to the empty space. The Gridfinity bins can have a height…
Wydruk około 4,36 €–5,32 € nettoWstępna wycena jednego wariantu
I really like this catchphrase, and I told myself "Hey, it splits pretty well into sub-parts, so why not include it on lock laces ?!". Since I don't walk around often with my printer in the street, this way I can wink at other PRUSA users…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This simple model, sized to 41 x 47 mm can be used as decoration or pendant or as anything else. I printed it with a nozzle of 0.4mm and a layer height of 0.3mm When slicing, you need to set the material change on the correct layer.
Wydruk około 2,46 €–3,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
night scene of hexagons. picturing a wolf, three, village, mountain, village and forrest. this is a remix of other models the site wouldn't let me credit these people elsewhere sorry : ( Jason535 (thingiverse) PaniniTheCat (thingiverse)…
Wydruk około 4,72 €–5,77 € nettoWstępna wycena jednego wariantu
Join here to get access: https://www.patreon.com/kogi3d 3D Printable Christmas Decorations Bring a touch of winter magic to your Christmas tree with this stylish set of three 3D-printed icicle ornaments . Each icicle features a smooth,…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
If printing from stl, Set top layers to 0, infill to concentric 60%, color change top 2 layers.
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Decorative rooster in a flower bed. I used a bamboo stick from Chinese food to stick. Dekorativní kohout do květníku. Pro zapíchnutí jsem použil bambusovou tyčku z čínského jídla.
Wydruk około 3,38 €–4,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Decorate your wall with this simple branch. It can be easily printed, the layer height can be even larger, e.g. 0.3 mm. CZ: Ozdobte si vaší stěnu třeba touto jednoduchou větvičkou. Lze jednoduše vytisknout, výška vrstvy může být i…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
📏 Size: approx. 10" W x 9" H ☀ Material: White or Black PETG plastic (holds up in sun, wind, and rain) 💐 Easy to stake into soil or mulch – no tools needed Looks beautiful with spring flowers like hyacinths, tulips, and muscari.…
Wydruk około 2,62 €–3,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this decorative support structure to protect dangerously sagging glass shelves on my TV cabinet. It prints without supports and you can just scale it to what ever size you need it in your slicer. The STL base measures 150 x 150…
Wydruk około 4,15 €–5,08 € nettoWstępna wycena jednego wariantu
Décoration de Noel bicolore : ours - Two-Tone Christmas Decoration: Bear
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
