17 modeli
My Vcore 3.1 XY Motor Stepper Mount Mod This mod offers several advantages: Belts are now visible so you can check if they are running properly on the idlers Shoulderbolts for perfect concentricity The pulley runs on a 5mm shaft with ball…
This mod is intended to take lateral stress and belt tension away from XY motor shafts. By using steel rods that are mounted on both sides of the pulley with bearings, the rods will handle the belt tension, and the motor shafts are…
The voxel Hula is a great design and does allow for decoupling of your 3d printer from its table. However the spring rate of the normal TPU spring is way too high and far too stiff to allow for proper decoupling. This design provides a…
A simple and affordable replacement of the stock RatRig V-Core3/3.1 motor cages that allows fast and easy belt replacement, without the need to unmount the entire motor assembly and (if legacy enclosed) the lid and other frame components.…
I have designed decoupling feets for the orignal feets of the Prusa Box. Just stick a few pads underneath and everything is a little quieter and produces less vibrations.
Dual volute springs ( Wickelfeder ) for decoupling vibrations. ∅20mm ∅4mm hole - easy support removal
After I managed to snap a stepper shaft... I wanted to use @NecroDavid_219352 design, which is nice and all but installing it on an existing machine is not possibel at best. So these mounts are mounted to the other side of the 3030…
This mod is intended to take lateral stress and belt tension away from XY motor shafts. By using steel rods that are mounted on both sides of the pulley with bearings, the rods will handle the belt tension, and the motor shafts are…
Should be printed on the side in a flexible material like polypropylene or TPU. I used FormFutura Centaur Polypropylene and it has the right flexibility for it to work perfectly. There were some adhesion issues, though, so I would…
This is a decoupling, easily stackable, frame for HDDs. The disk is suspended from the top beams by two straps of tape or some other suitably soft material. The straps are fastened to the disk by normal HDD mounting screws (4 per disk),…
I used "Concertomeister Baso" ( https://www.amazon.de/dp/B01MXW4BGR ) however other products should work as well. Edit the CAD model for different type. (btw, if you wondered: They have brown stains because of an espresso accident ;))…
Description Decoupling feet for a Voron Trident. This model was inspired by the great HULA feet designed by thrutheframe ( https://www.printables.com/model/898357-hula-v10-for-voron-printers/collections ). Motivation was that I didn't…
Description: Tired of the "death hum" of an Aquael Pat Mini vibrating against your aquarium glass? This 3D-printed transition block allows you to mount the Pat Mini head onto an SF Bio Filter (S) body, giving you a dual-sponge mechanical…
This is a simple tool to uncouple railway rolling stock that uses any form of tension lock coupling. Best printed in PLA using an FDM printer. It may work in resin, but likely to be brittle. I print mine in a bright colour so I can spot…
The TS-Optics focuser decoupling adapter with tilt flange (TILTRC8) is a worthwhile upgrade for GSO-built 8" RCs, including the StellaLyra, TS, Omegon and Astro-Tech versions. Fitting it means drilling three holes in the telescope's…
I used "Concertomeister Baso" ( https://www.amazon.de/dp/B01MXW4BGR ) however other products should work as well. Edit the CAD model for different type. (btw, if you wondered: They have brown stains because of an espresso accident ;))…
This unique pendulum-based loudspeaker decoupling system employs suspended support stands designed to fully isolate the speaker cabinet from the table/floor. By allowing free, controlled oscillation in multiple axes, the pendulum…
