3479 modeli
See my original model . Most of the voronoi deer models were too big to my Kodama Trinus small print bed (120mm). Downscaling them made too thin walls, so I had to take a solid model, downscale and voronize it myself. Should be fine…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
This little snap-together reindeer is a perfect give away or present for christmas. It's very easy to print and looks quite good. I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535 Print…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
8 point Buck. Added buck.tl.3mf and gcode 12/5/2023 (thicker legs less prone to breaking.) removed old files.
Wydruk około 4,62 €–5,64 € nettoWstępna wycena jednego wariantu
Reindeer napkin holder for Christmas. Or why not every other time as well.
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
Hey it's the waddle dees from Kirby. Just got gifted the new 3D Kirby game. Really good game! Thought it'd be cool to model some of the little monkey guys. I'm very new to “organic” modeling lol so this one is a little rough BUT with the…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Deep Sea Chicken Fish. Bet you didn't think you needed a Deep Sea Chicken Fish.
Wydruk około 16,15 €–19,73 € nettoWstępna wycena jednego wariantu
Bumble Snow Monster: Rudolph the Red Nose Reindeer. The one thing about Bumbles → Bumbles Bounce. Tree topper Version Included. His teeth are bad. He really does need a dentist. Suppose I should do a Hermey
Wydruk około 2,33 €–2,85 € nettoWstępna wycena jednego wariantu
This deer sculpture reflects the elegance and serenity of a wild stag, with detailed antlers and posture that make it ideal for winter decor, fairy tale scenes, or nature lovers. Printing : Compatible with FDM and resin printers Supports…
Wydruk około 1,04 €–1,28 € nettoWstępna wycena jednego wariantu
K dispozici jsou 2 vykrajovátka na cukroví - s jelenem a bez jelena. Pokud chcete dělat cukroví jako na obrázku (linecké), udělejte jedno bez jelena, potřete ho marmeládou a přilepte k dílu s jelenem.
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Rudolph and Clarice : Rudolph the Red Nose Reindeer
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Spare gear for John Deere Peg Perego gearbox. Gear modify to bearing 628/8.
Wydruk około 2,12 €–2,60 € nettoWstępna wycena jednego wariantu
currently setup ignition power A = Constant Bat+ 12v B = Constant Bat- 0V C = Ignition switched 12V Printed in PETG for durability crimp blue sleeves fully otherwise you can't insert them
Wydruk około 0,39 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
John Deere key chain
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
kann auf die morhaube eines john deeres mit 4 schrauben befestigt werden
Wydruk około 6,10 €–7,46 € nettoWstępna wycena jednego wariantu
Rudolph the Reindeer XMas decoration !!! Reindeer: Layerheight: 0.2mm Infill: 10% Support: no Nose: Layerheight: 0.2mm Infill: 10% Support: yes Printed on my PrusaMk3S using GcodePrintr App.
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
Design Concept The Cute Astronaut Deejay figurine features a charming design that merges the intriguing universe of space exploration with the contemporary world of music. The stylized astronaut figure is poised over turntables, casting a…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
Serre-tete renne Le père Noël a perdu ses rennes ? Voici de quoi reconstituer son équipage ! Le serre-tête peut être imprimé sans remplissage et sans support.(Oh Oh Oh). Si vous aimez ma création... cliquez sur j'aime ! Si vous voulez…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
I am sharing my 3d model that I designed and printed to make my project, and links will be below. Project GitHub page : https://github.com/omriharel/deej/ discord server of the project : https://discord.gg/DHGtp9CX materials you will…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Este barril es un excelente adorno para tu escritorio, es el logo de la empresa John Deere. Se imprime sin soportes.
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…
Wydruk około 6,54 €–7,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Great for birthdays, Christmas, and more. Marry Christmas!
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
Print settings 100% infill 2 perimeters 0.05 first layer because of adhesion
Wydruk około 0,15 €–0,19 € nettoWstępna wycena jednego wariantu
Rudolph the Rednosed Reindeer Santa
Wydruk około 15,01 €–18,34 € nettoWstępna wycena jednego wariantu
I wanted a deep rugged box capable of holding other prints of Whity's “Rugged Box (Parameterizable).”
Wydruk około 26,47 €–32,35 € nettoWstępna wycena jednego wariantu
Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. Damit können Gewindeeinsätze rechtwinklig in Bauteile eingebaut werden. Wenn der Druck korrekt ausgerichtet, wird keine Unterstützung benötigt (siehe 3mf-Dateien). Die…
Wydruk około 4,50 €–5,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print settings 100% infill 4 perimeters 0.05 first layer because of adhesion
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
The Two Stories of Vital-Dubray's "Neptune" This 1856 sculpture by French artist Paul Vital-Dubray isn't a snapshot from a single myth, like a scene from The Odyssey . Instead, it's a powerful and symbolic portrait of Neptune's absolute…
Wydruk około 14,43 €–17,64 € nettoWstępna wycena jednego wariantu
A small, simple standee for the Battlement Tokens. Allows for greater visibility while occupying less space in the region. Recommend Prusament Oh My Gold (Blend) PLA to match the Archwright Hero Board.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
PET-G 6 kontures 85% infill from 30mm to 45 mm 100% infill PET-G 6 Konturen 85% Füllung ab 30 mm bis 45 mm 100% Füllung
Wydruk około 11,12 €–13,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
for english please scroll down → für deutsch … hier lesen: Die Spieleschmiede brachte 2023 das Spiel Dungeon Drop inklusive Erweiterung Dropped Too Deep und andere mit dem Verlag Mirakulus heraus. Für diese Spielschachteln sind das die…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
This elk figurine captures the impressive size and majestic antlers of this iconic forest animal. Ideal for collectors, educators, and nature lovers. Printing : Suitable for FDM and resin printing Supports : Required under antlers, legs,…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
Case for Deek Robot Power Meter. Print settings: Material: PETG Nozzle: 0.4mm Layer: 0.2mm Infill: 100% Support: YES (like last picture) What you need: 4x 3mm threaded insert 4x M3 screw 4x 4mm banana socket 1x switch (d=6mm) 1x 9V…
Wydruk około 3,80 €–4,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
John Deere two sided key chain, 3 color print. Designed to print black & yellow (construction and forestry) on one side and green and yellow (ag and turf) on the reverse side
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
This blobfish model brings to life one of the ocean’s most unusual (and meme-worthy) creatures. With its droopy face and squishy form, it makes for a fun and eye-catching print. Printing : Suitable for FDM and resin printers Supports :…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu
This model is the first version. See improved version here: https://www.printables.com/model/421859-magnetic-frosthavengloomhaven-standees-second-edit Second edition features HP counter from both sides and other improvements - see the…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Deer coathanger (3 models)
Wydruk około 5,80 €–7,09 € nettoWstępna wycena jednego wariantu
🎬 Video: Watch how this festive 3D model takes shape layer by layer: https://www.tiktok.com/@3dprintfactoryat/video/7540265970645110038 ℹ Description: This low-poly Christmas model captures the charm of the holidays with clean geometric…
Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu
I'm a big fan of the Benq Monitor lights as they offer a simple genius light for your desk. Unfortunately I couldn't use it stock on either of my workspaces without modifications. You can now benefit from my struggles ;D This adapter…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
⚠ Be extra careful when removing supports — the legs and antlers are delicate! 🔧 Recommended: use fine pliers for support removal Meet the Mini Reindeer — an adorable, tiny Christmas companion perfect for miniature setups or festive…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Cute Reindeer Prints flat without any support, you will need about 20 grams of filament and half an hour at 100% scale in one color. You can make it multicolored by painting the antlers or adding a filament change at height. Print…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
This model is 3D Scanned by me and then touched up a little bit using blender. If you like my 3D Scanned models, consider joining my club for more. If you love this design and want to see more fun projects like it, consider joining my…
Wydruk około 5,61 €–6,86 € nettoWstępna wycena jednego wariantu
Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
Aufbewahrungsbox für Ruthex Aufsätze zum Gewindeeinschmelzen M2-M8. Verschluß mit 4 Magnete Durchmesser 5mm x 1.7mm. Storage box for Ruthex attachments for thread melting M2-M8. Closure with 4 magnets diameter 5mm x 1.7mm.
Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu
I'm posting it here in the odd chance it may this may be useful for somebody else… Printing instructions Printed in PETG with the default 0.2mm layer height settings. Two minor twists related to the two “hooks” on either side: They need…
Wydruk około 4,29 €–5,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a jewlery stand in the shape of a reindeer. And it makes an excellent Christmas gift. At least that is where the model comes from. I made it out of wood on the bandsaw, however the 3D model exists, why not print it! The gcode is…
Wydruk około 8,88 €–10,86 € nettoWstępna wycena jednego wariantu
Printed in PLA with colour changes at 2.0mm and 2.4 mm to get the white/black eyes. Easy to print and does not use a lot of filament. Haven't tried it on a Christmas tree yet as it's only August at the moment I designed and printed this.
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
A model of the flare from Deep Rock Galactic. The model has several components that can be printed in different colours. Additional Required Parts: ESP32 DevBoard “TTGO T-Energy T-18” or similar “18650 Battery" for the DevBoard “WS2812…
Wydruk około 3,74 €–4,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Some older models of the Ecovacs Deebot have a brush roll with a keyed shaft which requires a square adapter to fit into the robot. This is a tiny part and easy to lose. Should fit: Deebot Ozmo 900 / 901 / 930 / 950 / 960 Deebot M87 / M80…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Layer Heigh 0.08 Initial layer 0.2 walls 5 x 0.08 Line supports Printing 80mm/s Very smooth and no need for post processing. (only support remooving) you can change settings for print and make it faster and less smooth, it will take about…
Wydruk około 9,39 €–11,48 € nettoWstępna wycena jednego wariantu
PRIma's NanoVise V2 and clamps work great on my square-edge lack shelf and workbench! To use the vise on my routed edge desktop, the clamps just didn't reach beyond the depth of my routed desktop. I remixed the large PRIma clamp to reach…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
“When you have a hammer, everything looks like a nail” – Abraham Maslow's Law of the Instrument Phone holder accessory for the front end loader conversion of the ERTL die cast model – Turn that 1950's crawler loader into an integrated…
Wydruk około 2,27 €–2,78 € nettoWstępna wycena jednego wariantu
A simple paint tray for all your art needs. Can also hold game dice as well. Works great in PLA, PETG, and other exotic polymers. Print flat with no supports, recommend brims if you are using a Bambu printer, Included is the .blend file,…
Wydruk około 8,70 €–10,64 € nettoWstępna wycena jednego wariantu
Simple model of Rudolph the Red-Nosed Reindeer, which can be easily disassembled as the original design is made by friend of mine, who cut it from the wood several decades back. I made my own version of Rudolph years ago from the wood,…
Wydruk około 1,21 €–1,47 € nettoWstępna wycena jednego wariantu
“When you have a hammer, everything looks like a nail” – Abraham Maslow's Law of the Instrument Pocket protector modeled after those classic white vinyl protectors – Turn that 1950's crawler loader into an integrated tool carrier!
Wydruk około 4,64 €–5,67 € nettoWstępna wycena jednego wariantu
If you have a projector with those discs, then print the box to avoid any damage or loss of loved discs. Stl file is for projector Mideer. It's modified coin cell storage box. The main difference is the little axle on one side of the…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
one drop of clear silicone rubber attach the stand spring to the head
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
wall art: a tree You may use it as stencil too.
Wydruk około 2,38 €–2,90 € nettoWstępna wycena jednego wariantu
Lustiger RenTierKopf zur Dekoration von Geschenken, Flaschen, Räume,… passt auf Bier, Weinflaschen, Spirituosen,… Kann ohne Supports gedruckt werden! Im Datensatz für die MMU kann man die Farben der Einzelteile der Baugruppe ändern! Viel…
Wydruk około 8,60 €–10,51 € nettoWstępna wycena jednego wariantu
Christmas Card Reindeer (singe extruder print) Multicolor by layers: White (I use fluorescent white) Red Black Take an ornament for the Christmas tree from the postcard!
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Reindeer designed by Reyes León from Gyrarchitects in Prusa PLA lipstick red material. It assembles like a puzzle, which kids love, and prints quickly, which is very important to us.…
Wydruk około 3,11 €–3,80 € nettoWstępna wycena jednego wariantu
Here's a link to the brushes: https://www.amazon.com/dp/B073R3D1C9 I use them to clean PCBs and plastic housings.
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
Colours: the first: transparent light blue the second: transparent yellow or orange the third: light green the last: black or: the first: transparent yellow the second: transparent red or orange the third: dark green the last: black
Wydruk około 3,83 €–4,68 € nettoWstępna wycena jednego wariantu
The lowest poly Christ the redeemer keycap is the perfect thing to put on your mechanical keyboard. If you like the lowest poly Christ the redeemer this is the perfect addition to your desk setup. (may need to shrink down in slicer)
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Easy to print in PLA or PETG.
Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu
LED low flying reindeer warning sign. 4 red glowing LEDs will warn your guests about these seasonal upcoming low flying reindeers. Printed in German but an English variant is available too. The complete electronics is battery powered and…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Pedal attachment for John Deere electric car, junior still has short legs and the seat was not moved forward enough. Nástavec pedálu do elektrického auta John Deere, junior má ještě krátké nohy a posun sedadla dopředu nestačil. Print in…
Wydruk około 3,01 €–3,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of Kirils Deep 55mm lens cap . The only thing I've done is scale the model by 89% so that it fits lenses that use 49mm diameter caps. I printed mine out of ASA with a 0.1mm layer height.
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
Store your deep 1/2" drive impact sockets (24, 22, 21, 19 and 18 mm) in a Gridfinity tray - lying at an angle, compact and easy to grab. Gridfinity bin with a 2x5 footprint - it drops straight onto any standard Gridfinity baseplate. Part…
Wydruk około 4,51 €–5,51 € nettoWstępna wycena jednego wariantu
Store your deep 1/2" drive impact sockets (17, 16, 15 and 13 mm) in a Gridfinity tray - lying at an angle, compact and easy to grab. Gridfinity bin with a 2x4 footprint - it drops straight onto any standard Gridfinity baseplate. Part of…
Wydruk około 3,65 €–4,46 € nettoWstępna wycena jednego wariantu
This 3D model is a stylized representation of a deer with a distinctive Voronoi texture.
This small, charming reindeer figure is a lovely decoration for your windowsill or a festive Christmas table. It is quick and easy to print, and its minimalist design gives it an elegant, high-quality appearance. It also looks great when…
🦌 Minimalist Low Poly Reindeer Sculpture For all fans of my minimalist sculptures… today I’m releasing another Low Poly model ! This reindeer fits beautifully into the Christmas season, but also works perfectly as a timeless decorative…
The Voronoi Holiday Christmas Deer is a decorative piece that combines natural elements with a contemporary design technique known as Voronoi tessellation. The model features a deer with an intricate, lace-like structure that mimics the…
This is a very highly detailed model created using photogrammetry and manual detail sculpted in by studying the physical object. The subject scanned was a very large male white-tailed deer skull. This model involved applying the use of a…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :)
Christmas Deer Kit Card. Easy to print and assembly, makes a great christmas gift! Parts can be broken free of the frame by hand but can also be snipped off with small pliers to get a cleaner breakaway. If you want to support me or get…
Simple and elegant deer sculpture. Can be scaled to whatever you want, so you can print a familiy :-D
It's a pastry cutter. It's very simple. Height is 5.8 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
CUTE KNITTED REINDEER - Print-in-place - Minimal supports required Join my Patreon to get full access!
4 ks Dekorativní rámečky Jelen Vlk Medvěd Šestihranné
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
Say hello to your new aquatic buddy! With its round face, frilly gills, and permanently cheerful smile, this little axolotl is here to brighten your day. Whether it’s chilling on your desk or hanging from your keychain, it’s a fast and…
This is a high resolution scan of an antler off of a deer. It's about 12" wide by 17" tall but it can be scaled to fit your printer. I tried to set the scan in a good position to print, but some adjustment will be necessary. A great trick…
A simple but cute Christmas reindeer. Put a Ferrero Rocher into it and give it away as a cute present! Features Cute design Easy to print Two versions: Default and fuzzy skin Last minute gift Recommended print settings (or just use the…
Material PLA Layer height 0,2 mm or 0,2 mm + variable layer height for better results Infill 10/20% Support The model shouldn't require any support material. But if you have cooling problems supports could be an option You can also try…
UPDATE 11/14/2023 added nemmie and henry and gave some sub text UPDATE 10/1/2022: added octoberfest mugs and did some sorting creator notes: I am still working on this and I get very busy with work irl so please be patient. I have since…
original designer: https://www.thingiverse.com/thing:1203313
MODEL DETAILS This is a festive model that doubles as a stress test for your 3D Printer. If you liked this model, why not try our other stress tests too? RECOMMENDED PRINT SETTINGS A 0.6 Nozzle or smaller is recommended when at 100%…
This beautifully stylized deer features a sleek, swirling design that gives it a magical, almost fantasy-like appearance. The long, spiraled antlers add height and elegance, making it a perfect centerpiece for holiday decorations —…
Petite Palette – Deep Dish is an upgrade to my old Petite Paint Palette. They sit comfortably on your hand and come with 1, 3 or 5 deep dishes for big globs of paint. Left and right-handed versions are available. A slip fit lid is also…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
I recently fell in love with the Honeycomb Storage Wall (HSW) but couldn't find a good generic bucket to keep items in. The shelves weren't deep enough and the cups were too deep. The HSW bucket-shelf was exactly what I wanted but…
This bin follows the design of the original Gridfinity basic bin. However the internal space extends down into that space normally reserved for the magnets. I've exported several sizes but if there's something that you would like to tweak…
I've included a blank label and “Rotary Tool”. Easy to add text in a slicer - I used BambuStudio. I used raised text and printed on the face with supports. You could also print the text flush for a cleaner surface and no supports needed.…
https://www.buymeacoffee.com/maxt ---------------------- ONE SERIES, ONE FAMILY Adult model but in standing position: Holiday Christmas Deer - Low Poly Adult model but in laying position: Laying Christmas Deer - Low Poly Youngster model:…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
