53 modeli
A case for Arudino DHT11 temperature and humidity sensor. The case is printed in two parts. No glue or screws needed. The chassi may have to be cleaned from any residual before inserting the cover. The case can be mounted with…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
Simple DHT11/22 holder (stand). Print instructions Default settings will do.
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design is: A simple holder for DHT11 breakout boards. Designed to be mounted with a countersunk screw. No threaded inserts required - the single M3 screw threads directly into the holder. Able to be used commercially / sold (see…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
DHT11 Sensor Case for AZ-Delivery DHT11 Optional bottom piece with mounting hole included. The two pieces are meant to be clued together. I'm currently working on snap-together pieces. Feel free to remix. Tolerances for the top piece are…
This is my rendition of a case with lid for the ESP32 S2 NodeMCU board to house the DHT11 temperature and humidity sensor. This model also have the Home Assistant logo embedded on the side. This simple design ensures a tight fit for the…
This is an enclosure for a DHT11 sensor module. The Sensor/PCB is held inside the case body by the post, and the lid is secured to the body using a flat or pan head M2x3 screw through the same post. Print Settings Printer Brand: Prusa…
Spliced together a few different files to fit my own requirements. You may need to re-size/check the carrier dimensions depending on your own ESP32 board. I designed this to use with Jumper cables, i didn't have a screw for the DHT sensor…
Simple DHT11 housing with 3mm cablehole. Lid snaps in place, no glue needed. Print instructions Category: Electronics Summary Simple DHT11 housing with 3mm cablehole. Lid snaps in place, no glue needed. Print Settings Printer Brand: Prusa…
This is my rendition of a case with lid for the ESP32 Devkit V1 NodeMCU board to house the DHT11 temperature and humidity sensor. This simple design ensures a tight fit for the ESP32 Devkit V1 board, and also a squeezed fit for the DHT11…
Summary A case for a temperature and humidity sensor powered by an Arduino uno board. The case fits: an Arduino uno a small breadboard a 16x2 LCD display a DHT11 temperature and humidity sensor The parts are locked in place by melting the…
Here is a simple housing for the DHT11 temp and humidity sensor that is mountable using two #6 screws. Ideal for indoor applications or outdoor locations that are undercover as this is not a waterproof housing. Check out the assembly…
This little enclosure will hold an ESP32 and DHT22 snugly, for wifi climate monitoring in a nice small package. I recommend the vented, direct soldered lid. Even with the vents, if you use this without deep sleep or lower power mode, THE…
You can use this to make IoT devices , such as Tasmota devices or other IoT and Home Automations projects Hope this will help you
So I made this box that can hold in place an Arduino Uno, a breadboard, an LCD (16x2) and there is also room for a dht11 sensor on both sides to make it more convenient to assemble. The box was also designed keeping in mind room for…
Simple case for an ESP8266 or ESP32 board (in my case NodeMCU), a temperature sensor DHT11 or DHT22 and a small SSD1306 oled screen. Works great as a small Duino-Coin IoT setup. Designed with Tinkercad. Parts need to be glued together…
Case for Esp32 + PIR + DHT11 + RCWL-016 I use Espresense to detect presence by detecting the Bluetooth signal intensity of my devices. Additionally, it has a temperature sensor and two motion sensors, one with infrared waves and the other…
This is a remix I made to montior the temperature & humidity of my network cabinet using Home Assistant & ESP Home - It then triggers & automation to turn on fans to cool the cabient once a temperature threshold has been reached.
Einfaches Gehäuse für DHT11. Ichhabe es mit 0,15mm gedruckt, damit der umlaufende Snap-In gedruckt wird. (Im Slicer überprüfen, oder Kleber verwenden... :-) ) (DeepL) Simple housing for DHT11. I printed it with 0.15mm so that the…
DHT22 / DHT11 / AM2302 sensor mount. Mount using zip tie or screws. Category: Electronics
Simple sliding lid box that will hold the DHT11 temperature and humidity sensor securely with strain relief for the connector. There is a tabbed version for hanging and an untabbed version for sticking to things or just having a smaller…
Changes in this remix: larger hole so that jumper wires fit through removed mounting hole split into two parts
Simple remix to allow 1x3 DuPont connectors through the hole. The top available in the original model.
ARCELI DHT11 Temperature & Humidity Module.STL
DHT11 Sensor Enclosure A minimalist and compact enclosure for the popular DHT11 temperature and humidity sensor. Provides basic mechanical protection while allowing free airflow for accurate measurements. 🔧 Key Features and Uses:…
Small outdoor mount for DHT11 temperature sensor. The sensor is to be held in place with double sided tape. I used transparent nail polish to waterproof the screws. Note: I have this mount outside exposed to the element for a year and the…
ESP-32S ESP-WROOM-32 PIR Dual relay DHT11 sensor case Category: DIY
The DHT11 case is a compact and durable enclosure designed to protect the DHT11 sensor from physical damage and environmental factors while maintaining optimal functionality. The case includes strategically placed ventilation openings to…
A small enclosure to stand in the room to hold a 16x2 LCD a DHT11 and WEMOS D1 Mini in it. The right for size for a IOT infoscreen. Category: DIY
Assembly Instructions All of the parts are shown above along with three dupont wires The top must be attached to the bottom case - I used super glue Once they are glued the sensor can be slid in The wires can be connected before or after…
Enclosure / Connector for a DHT22 / DHT11 / AM2302 sensor. Included are two different methods of interfacing with the sensor: CAT5 Ethernet Keystone Jack Cable Category: Electronics
I bought some DHT11 modules from amazon that were a bit longer than the ones I could find holders for so made my own. The STL has two parts, a top and a bottom. The bottom could be left out if you didnt mount the unit to anything…
Just small remix: Added a ear for my cable to hold. Moved the holding screw hole more to middle for my sensor. Removed the letters and legend from front cover. Adjusted the lid "ears" so they print on MK2S and its a snug fit now :) Print…
ESP32 devboard enclosure, big enough to keep the pins attached and use Dupont connectors to the ESP. The enclosure is designed for an ESP-32 Dev Kit C V4 like this one, but should also work with other boards of the same size, as the board…
I couldn't find a case to fit my DHT 11 Model in specific so I designed my own. I also added hole in the top whcih allow you to attach it to a keychain or mount it somewhere. The lid and case connect together with a snap-fit mechanism.…
ESP32-C3 DHT11 Weather Station Case – 3D Printed Enclosure This is a simple 3D printed enclosure for a DIY ESP32-C3 weather station using a DHT11 temperature and humidity sensor. The case was designed in FreeCAD and printed as part of my…
Also a remix of a Screen Cable Clip I made so without wires run behind it it will likely move freely on the rail. I put a piece of 1/2in foam tap on the back and that gave it enough grip to stay in place on the rail while still having…
DHT11 Clip-On Case For The Prusa I3 Mk3s+ I added Octoprint to my setup, along with a printer enclosure. I decided I wanted to monitor the temperature and humidity as well of my enclosure and have it on the Octoprint UI. To do this I used…
This is a case designed for the D1 Mini esp8266 board and DHT11 sensor. It was designed for the use as a smart sensor for home automation,specifically espHome and Home Assistant. Hardware: D1 Mini ESP8266 Board Digital Temp and Humidity…
Temperaturmessstation Hier ist der Link zu den Platinen: https://www.pcbway.com/project/shareproject/Temperaturmessstation_34478d1d.html Und hier könnt ihr selber Platinen bestellen: https://www.pcbway.com/ Temperaturmessstation mit LCD,…
This is a case for the ESP8266 ESP-01-based DHT11 module available via various sellers. For example, here is one that has the module and the ESP-01 as a combo. I have noticed that the temperature readings of these devices tend skew high…
So this is a 3d model that protects Esp-32 and DHT 11. This is for a project in school that i have.
Es un soporte para trabajar con el sensor DHT11 que nos sirve para trabajar y medir temperatura y humedad ambiente.
Summary D1 Mini & DHT11 Case Remix for USB-C connection Print Settings Rafts: No Supports: No Resolution: .2 Infill: 20
ESP8266 Box This is a small box for your small temperature sensor! With the right software you can easily build your own wifi thermometer! You only need jumpers, an esp8266 and a dht sensor! Have fun rebuilding!
This is a compact enclosure for a simple ESP-01 (ESP8266) based weather station. It includes: a cutout for a DHT11 humidity/temperature sensor on the front, a cable passthrough for an external DS18B20 temperature sensor , and space for a…
ein Gehäuse für ein dht11 Sensor, arduino und knöpfe. Mit knöpfe meine ich diesen Sensor von amazon https://www.amazon.de/Berührungssensormodul-Kapazitive-Touch-Taste-4-kanalige-Elektrische/dp/B082LYCC6W/ref=sr_1_20
This is a case for a DHT11 GPIO temperature and humidity sensor. Prints two different parts, attach with glue or tape.
ESP-32S ESP-WROOM-32 PIR Dual relay DHT11 sensor case Category: DIY
Makerworld +- Arduino Mega 2560: Makerworld https://amzn.to/4ruRVmK +- Pantalla TFT 2.4" Shield: https://amzn.to/4ushnMn +- Módulo RTC DS3231: https://amzn.to/3NdP8An +- Sensor DHT11: https://amzn.to/4djKsn0 +- Zumbador Activo (Buzzer):…
This is a case for the ESP8266 ESP-01-based DHT11 module available via various sellers. For example, here is one that has the module and the ESP-01 as a combo. I have noticed that the temperature readings of these devices tend skew high…
The DHT11 case is a compact and durable enclosure designed to protect the DHT11 sensor from physical damage and environmental factors while maintaining optimal functionality. The case includes strategically placed ventilation openings to…
I couldn't find a case to fit my DHT 11 Model in specific so I designed my own. I also added hole in the top whcih allow you to attach it to a keychain or mount it somewhere. The lid and case connect together with a snap-fit mechanism.…
