Upside down dishwashing liquid holder
The bottle can simply be snapped in and the closure can be opened or closed together with the holder.
- Pobrania
- 625
- Polubienia
- 245
- Ocena
- 5
45 modeli
The bottle can simply be snapped in and the closure can be opened or closed together with the holder.
This is a handle to hold half of a standard yellow sponge. I was never able to find the same holder online I had from way back in the day, so I designed this one. Cut a yellow sponge into halves, and then slide one half into the center…
The dispenser can hold 50 pieces.
A holder for 2 sponges and a dishwashing liquid. In 2 parts to make printing easy without support. PETG is more resistant to water than PLA! Slicer setting for the holder : Wall loops: adjust so you don't see any gap between external and…
The box is a remix of " scorf ". I used the dosing spoon from "randers" for the dishwashing powder from DM and designed a matching box. The spoon can be put into the recess and then holds by itself. This is very convenient when the box no…
It works, but will have to see how it holds up in use. So consider this an early prototype. Thanks to @Stivo_245958 for the original design!
*Iteration, added 2 new versions as mentioned in the comments, One that is solid bottom so you can do slicer magic and make any bottom pattern you want, but still open open on the sides, and then Solid bottom and solid sides. So whenever…
This low-profile wall mount is designed to hold an Ikea RINNIG dishwashing brush perfectly and most importantly in the right orientation, so brush-side down, on any wall you like. Stick some double-sided tape on the back of the mount and…
During Pandemic we all do a lot more of dish washing (even if you have a dishwasher) than usual so I thought it would be useful to have a holder for holding dish washing liquid bottle up side down. Problem is when the bottle is almost…
Straight scoops that come with powers may be cheaper to injection mould, but the handles usually end up in the powder. We don't have to worry about such constraints, so let’s switch from scoops to ladles and keep the powder off our…
Inside the box is slope so that the water can flow away trough the drain channels outside. The box is dimension for a shampoo container Head and shoulders XXL. The inner size box for a container is 103x71mm. The inner size Bowl for the…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** A brush stand to keep your sink counter neat and tidy:…
Upside-down stand for small and large bottle if dishwashing liquid (Pril). Simplifies the dosing of the detergent residue. Kopfüber Standfuss für kleine und große Prilflaschen. Vereinfacht die Dosierung des Spülmittelrestes. Print…
Simple replacement bottle for liquid dispenser. I have broken original, so created this one :) Thread is quite universal, so should be able to attach to near any dispenser. 2 bottle sizes diameters, 50mm and 55mm. 3mf files included. I…
Dishwashing brush holder. This holder perfectly fits on the kitchen wall or on the inside/outside of a cabinet door. It can hold 2 (Ikea) brushes. v3 - original v4 - original + smoother edges and stronger v4 smaller - like v4 but for 1…
We buy our dishwashing powder in bulk and transfer it to our point-of-use container from time to time. The transfer of powder from a large container to a smaller one can be frustrating at times. I made a simple funnel to fit into our…
Tired of searching for a convenient spot for your dishwashing sponge? This Extendable Sponge Holder is the perfect solution for double bowl kitchen sinks. Designed to fit most sinks, it extends to accommodate wall widths from 3 to 5 cm,…
Brush holder for (IKEA/Suction) Dishwashing Brush Can be used for all types of suction dishwashing brushes (since they usually don't stick that well)
Kitchen tool to organize dishwashing brushes and a sponge. Saves space and is more hygienic
This is a remix to mount the holder with below a shelf.
dishwashing capsule holder with magnetic top you need for it 4 magnets (7X2 mm)
The container is made in three parts and does not require additional gluing or the use of additional components. Fully functional shock absorbers and the bottom of the container are made of PETG material and the top is made of PLA.…
Designed to hold dishwashing soap and handsoap on a rack to allow excess water to drain into the sink. Printing: Print Dishsoap Plate with a modifier to remove Top and Bottom Layers. Modifier size I used was 114.4 x196.4 x10 Print…
dishwashing capsule holder with magnetic top you need for it 4 magnets (7X2 mm) 25,5 cm high
PLA is not generally recommended, but for me it was for a dishwasher that I don't use much.
put a drop of dishwashing liquid to a small box, and you can start your boat ride ;)
Print out the trim in a silk metal PLA for a classy look. Glued trim on to main body with super glue. Mounted with clips to my window sill, but you will probably want to use gel mounting tape. Holds a Dawn Powerwash spray bottle, two…
This model like most I have made so far is born form necessity, we currently use ‘Disposable’ shot glasses to give samples of products to visitors. Wanting to cut down on waste(binning every glass after use) we wash them to allow them to…
The original part was highly unreliable, yet other designers continued to replicate its flawed design. I completely redesigned it, making it far superior to the original.
Slight modification to fit Morning Fresh bottles.
Holder for a dishwashing brush
Holder for Dishwashing liquid dispenser (WENKO Spülmittelspender) inner diameter: 61mm Perfect fit for: Amazon.de/wenko
Simple holder for the dishwashing liquid in the kitchen sink. It can be parameterized via Fusion 3D. I added some Organic supports (PrucaSlicer 2.6 beta1) which i think are just awesome. very little material and super easy to remove.
After being tired of having no practical way to store the sponge-brushes for soap-filled dishwashing handles, I decided to design a magazine-tower for holding them and easily accessing them when needed. So I made a magazine-tower for…
This holds Ikea RINNIG dishwashing brushes on the NEREBY shelfs rod.
Made two J hooks to slide them between the holes of my kitchen soap rack to hang my dishwashing sponge on. I tried recycling a PET bottle before but found it collecting too much grime every fortnight. The J-hooks have stayed grime free…
Tray for sponge (100x70mm) and dishwashing liquid (~diameter ~60mm). Used galaxy black filament.
Simple support to help detergent bottle stable on a narrow kitchen sink.
Our dishwasher is quite old and the plastic rollers holding the top rack in place, are crumbling and breaking. So we replaced it with these. Print with supports and in a water proof material like PETg.
Made this custom model for my SHOCK WATERFALL sink to hold detergent and sponge. The detergent bottle was bought separately. The wire is for kitchen towel and has diameter of 4 mm. It was bent using some old towel hanger I had laying…
This dish washing liquid bottle holder will hold your bottle on the wall. Flip the bottle upside down to get some liquid out, or pull the bottle out to put liquid in a pot for example. In addition to the printed parts you will need two…
A simple attachment loop for dishwashing brush or similar, with integrated 6X3 magnet. Magnet attachment ensures that even if someone were to tug the bursh hanging from this forcefully, the loop will not break but just pulls away from the…
I needed a simple organizer for a sponge and Sonett cleaning fluid in the kitchen. Here is a link to Tinkercad, where you can customize the model: https://www.tinkercad.com/things/g2WZnAnvM2d-drzak-na-houbicku-a-sonnet-jar -- Potřeboval…
Designed with two separate compartments, this holder provides convenient storage for straw cleaners, bottle brushes, and other dishwashing accessories while keeping everything upright and easily accessible.
Upside-down stand for small and large bottle if dishwashing liquid (Pril). Simplifies the dosing of the detergent residue. Kopfüber Standfuss für kleine und große Prilflaschen. Vereinfacht die Dosierung des Spülmittelrestes. Print…