43 modeli
There's a lot of plastic at the bottom to give you the ability to put a bolt/screw through the bushing to hold it in the J Mount rotation wise. The top lip is slightly asymmetric to make it substantially easier to remove from the J mount…
Wydruk około 2,72 €–3,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommend printing in ASA for heat and UV protection. Super glued most of the bezel pieces on and filled the gaps between the pieces with super glue as well. I used Sikaflex on the piece that has the cable coming through it. This is both…
This is a remix of @chadfawcett_690675 original design. Updated the dimensions for a snug fit. Increased the height to 5mm taller to clear the cable from rubbing on the PCB as well as the acrylic sheet from rubbing on the PCB connector.…
Settings: Material: Polymaker ASA Nozzle Size: 0.6mm Layer Height: 0.4mm Infill: 100% Requires: 1x Long hex bolt 1x Nylock nut 2x Fender washers
We recently added StarLink to our RV. This is a set of models for mounting the gen3 “standard” flat panel to the back of a storage bay door. The bracket is printed in 4 parts which fit together. The “Right Upper” piece has an “Arrow”…
Update: I also included the Fusion 360 file so you can make adjustments. However, I did not translate it, so it's in German ;-) This is a 1-part or 4-part housing for a Starlink standard rectangular dish. It can used as a flatmount (dish…
This is a remix of the Starlink Dishy DC Power Supply PoE Injector enclosure posted by Everlanders at https://www.thingiverse.com/thing:5893999 The video showing Everlanders design and printing can be seen here:…
This is a design made by Donald Scott (Facebook Starling Forum) Made to fit Rails with 22-32mm diameters. Rotates completely to accommodate horizontal, vertical, or any angle rails. Ethernet cable can be ported on the inside railing that…
Printed using PETG, model took approx 24hrs to print. Suggest using heavy brim lines and a hotter than normal build plate to avoid warping. Printed on an ender 3 s1 pro.
I needed a Starlink square Dishy mount for the Harbor Freight 20ft telescopic flag pole on my RV. All the existing models I tried didn't fit snug or didn't lock-in the Starlink, so I decided to model my own. This model fits snug on both…
I liked the cover for the router end that I found here https://www.printables.com/model/322857-starlink-ethernet-adapter so I decided to make one for the dish end of the cable to go with it.
You can mount you starlink dishy on a reeling. You just need 4 M5 x 16 screws with nuts. You may attach an additional safety wire to your dishy, just in case :-) I printed it on a MK3s with PETG 0.15 layer height and 25%.
A small adapter to get a flat surface for washers/nuts/bolts on the included dish stand.
I was looking for a way to have my Starlink Dish mounted on a fence post at my property and could not find anything suitable so I created my V1 Dishy Fence Post Mount for the Gen 1 version. NOW, thanks to the unwanted attention of some…
Starlink Dishy flat mount with provisions for the Boondocker PSU, Raspberry Pi 4 as a wifi router, and a DC converter. Printable on a ~200x200 bed. 12dc powers the unit. Various instructions on the interweb on each of these items. What is…
This project consists of two brackets and an adapter. It uses the StarLink Pipe Adapter and this telescopic extension pole that I got from Amazon. The brackets are designed to fit around a ladder with 1" vertical tubes. It's a very tight…
*This is still a work in progress but I wanted to upload what I have so far .* After installing my Dishy McFlatface at my house, I thought it would be fun to have a small scale version for my desk at work. It's roughly 2" by 3.5". The…
this is a stand adapter for starlink v2, the rectangular one, to mount the standard kit base with nuts and bolts more easly, the inner hole is fo a m4 and M5 screw. I attached it to a magnet with m5 screw to avoid drilling hole on my roof…
Riser feet for the new Starlink Dishy gen3, keeps the dish from actually being on the ground
Tired of waiting for my dishy to come so I made my own.
Print in ASA for better UV protection; I used 50% infill and the 20mm SPEED profile. There's an inner ridge that the Dishy will click into, and a screw hole to keep it from spinning around in the Wilson weBoost mount.
This Starlink mount fits into a standard 80mm drain/waste pipe and provides an extremely strong mount for Dishy. I sprayed mine with white paint after completion to give further protection from the elements. Slide the mount into the top…
Starlink Dishy 1.25 inch clamp on pole mount for fiberglass (or any) pole. should not require any supports to print.
I was looking for a way to have my Starlink Dishy mounted on a fence post at my property and could not find anything suitable. This version works with my New Zealand Starlink Dish and screws down onto the top of a fencepost. I have had it…
Permanent-mount Starlink Dish Adapter This is a custom-designed adapter to mount the square Starlink satellite dish - fondly known as "Dishy" - to a 1" threaded galvanized pipe that is set in concrete. I created the adapter to make a…
This mount was created to mount the StarLink dish to an existing satellite dish pole. The mount uses a 2" hose clamp to holed the mount to the satellite pole. Feed the StarLink cable through satellite pole and through the mount, then plug…
Starlink Dishy Dualie DC Power Supply v3 Created primarily to give you a hole pattern and sizing for any case you might want to design or to embed into a flat dishy design. File supplied by the vendor. Thank you Matt Thompson. Designed…
Adaptér mezi anténu Starlink Dishy (Standard Actuated - prostě hranatá natáčecí) a tyč s křížovým zakončením, například (https://1url.cz/11eui). Jelikož tyč je zpravidla třeba do země zatlouci a křížová sekce se poškodí, je X vstup širší…
Enclosure for Boondocker's Dishy Dualie revision v1.5a. Features Tapered walls above the ethernet ports for easy access to the release Dishy Enabled LED Indicator Parts Assembled with 4x M3x20 cap head hex bolts
Starlink Dishy to two inch pipe adapter. [EDIT] Important printing notes: print this in ASA if you have it because it's UV resistant I printed mine top-side down, with supports. (Top as mounted, the smaller opening facing the printing…
Disclaimer: This will definelty void your warranty, you can easily break your very expensive starlink dish, do not try this if you are not confortable with DIY projects. IM NOT RESPONSIBLE IF YOU BREAK SOMETHING, DAMAGE PROPERTY OR HURT…
Container to hold the 2 components. You will need 2 4mm inserts 3mm screws. Power your router and dish using a MGGi DC Booster Voltage Regulator, 12V Step Up to 48V 3A 145W Converter AND A LM2596 DC-DC Buck Converter Step Down Module…
Starlink Dishy Gen1 pole mount TV/SAT diameter 40 mm
Many thanks to bitwiz for providing their original Fusion files; I was able to measure the umbrella stand in question and make the changes we needed quickly and easily. You'll find the Fusion file (as well as STL and STEP files) so you…
I have printed this in PETG 0.2 with no supports. Magnets used are 15X4 with M3X12 countersink screws. I am trying to find some thin felt to cover the face and prevent scratching the paint. Grips well but only for stationary use. My dish…
Flat mount with relatively low profile. Gets rid of the proprietary Starling plugs. Design uses IP 65 Ethernet plugs ( coupler and plug .) The base uses a 3mm polycarbonat sheet for the bottom. Hard ware is M3x20 and M3x16. Threads use…
After scoring use a sturdy knife and a rubber to split the case of the dish in order to flat mount it.
Starlink Dishy flat mount with provisions for the Boondocker PSU, Raspberry Pi 4 as a wifi router, and a DC converter. Printable on a ~200x200 bed. 12dc powers the unit. Various instructions on the interweb on each of these items. What is…
Container to hold the 2 components. You will need 2 4mm inserts 3mm screws. Power your router and dish using a MGGi DC Booster Voltage Regulator, 12V Step Up to 48V 3A 145W Converter AND A LM2596 DC-DC Buck Converter Step Down Module…
Starlink Dishy Dualie DC Power Supply v3 Created primarily to give you a hole pattern and sizing for any case you might want to design or to embed into a flat dishy design. File supplied by the vendor. Thank you Matt Thompson. Designed…
Container to hold the 2 components. You will need 2 4mm inserts 3mm screws. Power your router and dish using a MGGi DC Booster Voltage Regulator, 12V Step Up to 48V 3A 145W Converter AND A LM2596 DC-DC Buck Converter Step Down Module…
Starlink Dishy flat mount with provisions for the Boondocker PSU, Raspberry Pi 4 as a wifi router, and a DC converter. Printable on a ~200x200 bed. 12dc powers the unit. Various instructions on the interweb on each of these items. What is…
Starlink Dishy Dualie DC Power Supply v3 Created primarily to give you a hole pattern and sizing for any case you might want to design or to embed into a flat dishy design. File supplied by the vendor. Thank you Matt Thompson. Designed…
