33 modeli
2 Parted Keycap to make use of the Keyboard Backlight. The Keycap Base can be pressed in the Keycap and will stay in place - no glue needed. I made following Logos: Arch Linux Ubuntu SteamDeckOS Linux Mint Manjaro Fedora CachyOS May i…
Linux Distro Keychains Collection. If you want a specific one, DM me, and I'll create one. For Ubuntu and Linux Mint logo, pause and change filament color when Z axis is +2.5mm. May the Linux force be with you... :)
For all MK lovers, this is **linux distro Arch OS** on a keycap. * Engraved and protruded. * Works with Otemu switches, should work with Cherry MX. * I added Test switch socket so you can test it first. Modification made to source files…
Print face down This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell). The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw…
For all MK lovers, this is Linux distro Fedora OS on a keycap. * Engraved and protruded. * Works with Otemu switches, should work with Cherry MX. * I added Test switch socket so you can test it first. Modification made to source files…
For all MK lovers, this is Linux distro Debian OS on a keycap. * Engraved and protruded. * Works with Otemu switches, should work with Cherry MX. * I added Test switch socket so you can test it first. Modification made to source files…
For all MK lovers, this is Linux distro Ubunto OS on a keycap. * Engraved and protruded. * Works with Otemu switches, should work with Cherry MX. * I added Test switch socket so you can test it first. Modification made to source files…
For all MK lovers, this is Linux distro Mint OS on a keycap. * Engraved and protruded. * Works with Otemu switches, should work with Cherry MX. * I added Test switch socket so you can test it first. Modification made to source files…
Backpack for the Fysetc Hexa Distro Fusion board. Interfaces with N3mi Umbilical Exhaust plates v2 ( https://github.com/DraftShift/CableManagement/tree/main/UserMods/N3MI-DG/Umbilical_plates_V2 ) Uses a PUG for cable strain relief…
Print face down This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell). The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw…
Clean Geometry: Legacy artifacts and unnecessary design elements from the original Fanny Pack model had been stripped away Board Mounting Bracket: The mounting bracket has been re-designed to use M3 heat-set inserts for all four board…
Just simple power distribution using XT-60 connectors and two copper bars. Leads should be fused with appropriate values. As well as the input lead, which can be plugged into one of the six connectors. Several versions of the case parts.…
For all MK lovers, this is Linux distro Gentoo OS on a keycap. * Engraved and protruded. * Works with Otemu switches, should work with Cherry MX. * I added Test switch socket so you can test it first. Modification made to source files…
Debian logo key chain designed in Oneshape. Dimensions: 37.5 mm diameter and 3 mm height Print time is more or less around 30m at 0.16 layer heigh (0.4 mm nozzle). Print parameters: Layer height - 0.16 mm or 0.12 mm Perimeters - 3 Infill…
The $4 4-position Anderson Powerpole Distro Center. You know you want to make your own! You'll need these items which I include as Amazon Affiliate Links. They are no cost to you, and they provide support through a commission paid to me.…
For all MK lovers, this is unix distro BSD OS on a keycap. * Engraved and protruded. * Works with Otemu switches, should work with Cherry MX. * I added Test switch socket so you can test it first. Modification made to source files thanks…
This project is designed to mount the FYSETC_Hexa_Distro_Fusion_Board to mount to DIN rails. This is useful for StealthChanger builds. Print Instructions: If the mount is inside the printer it is recommended to print in ABS or ASA,…
This is for the Falcon F8-Distro power board. It's a dual single mount. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .30 Infill: 20% Filament: Prusament PET or PETG Category: Other
I designed and added a backpack module for the existing umbilical plate. This backpack is specifically created to hold the Fysetc Hexa Distro Fusion and can be used in combination with the existing umbilical design. It improves mounting…
For all MK lovers, this is **linux distro Cent OS** on a keycap. * Engraved and protruded. * Works with Otemu switches, should work with Cherry MX. * I added Test switch socket so you can test it first. Modification made to source files…
Vertical Mount for Falcon F8 Power Distro Controller There are 4 holes on the board that line up w/ the Controller. Use M2 bolts to secure the controller to the board. There are 2 mount holes on the bottom that are used to secure the…
openSUSE logo key chain designed in Oneshape. Dimensions: 38 mm length x 20 mm width 3.6 mm height Print time is more or less around 17m at 0.16 layer heigh (0.4 mm nozzle). Print parameters: Layer height - 0.16 mm or better 0.12 mm…
For all MK lovers, this is **Linux distro MX OS** on a keycap. * Engraved and protruded. * Works with Otemu switches, should work with Cherry MX. * I added Test switch socket so you can test it first. Modification made to source files…
A simple DIN mounting bracket for the Fysetc Hexa Distro Fusion, most mounts for the board are for rear exhaust builds but I need a DIN mount and I like using the stock Voron clips, so I created this. This is in the style of the Voron…
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell). The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only…
Vertical Mount for Falcon F8 Power Distro Controller There are 4 holes on the board that line up w/ the Controller. Use M2 bolts to secure the controller to the board. There are 2 mount holes on the bottom that are used to secure the…
LinuxMint logo key chain designed in Oneshape. Dimensions: 38 mm diameter and 4 mm height Print time is more or less around 30m at 0.16 layer heigh (0.4 mm nozzle). Print parameters: Layer height - 0.16 mm or 0.12 mm Perimeters - 3 Infill…
Print face down This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell). The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw…
Two separate mounts (single or dual) for jboards. This will work with the diff-to-port and the power-8 distro board. It will work with other jboards that share the same hole dimensions. https://jboards.ecwid.com/ Category: Other
Переделал крышку чтобы не было зазоров по бокам.
These mounts are needed to mount the 8 Port LED Distro board and a PSU into a CG1500 case. No drilling needed. I also added a DIN rail mount for the 8 Port LED Distro. It does not go in the CG1500 case. The 8 Port LED Distro board is…
This is the stuff needed to mount the 8 Port LED Distro and a PSU into an MTM AC30C-11 case. You can buy the 8 Port LED Distro in our Tindie store: https://www.tindie.com/stores/bong69/ The PSU mounts fit this 12V 30A power supply:…
Distribution box printed in two half for better cable installation. Held together with 8xM3 16mm countersunk screws. Can be used for Powercon as in my case or as Snake with Ethercon and XLRs. Top half is printed with supports. On pictures…
