53 modeli
Jigs for sharpening Drill Bits up to 10mm with a Dremel and a Cuttingdisk for a grinding Angle of 118° (standard) and 135° drillbits. Credits for the idea to voltNik:-) Update 20.4.2022: I replaced the model-files for those with threads…
prints without supports
A very basic transportation tube for sds drills, so the lube stays on the drill and do not touch everything. It must be printed in “Spriral Vase”-mode, and the dimensions are adopted for my 0,4mm nozzle. However if you need some other…
Bohrerbox mini für Bohrer 1, 1.5, 2, 2.5 und 3mm. Meistens braucht man zum basteln nur die kleinen… Die Bohrungen müssen möglicherweise etwas nachgebohrt werden. Filament: PLA extrudr NX2
Organizer for drillbits for IKEA SKADIS board. Three sizes of holders available for most common drill bit sizes. FreeCAD files provided as well, if You need adjustments for different drillbit sizes. Each holder needs 2 hooks to hold on…
I was surprised not to find a holder for 1/4" hex drillbits anywhere, so I made one in Onshape https://cad.onshape.com/documents/e442a4ab6f2dae11b2f36b7e/w/d8343b35aab8d3bf320e8de1/e/73de30764f5655eb9f698df5 Model is 9 cm wide and has 3x7…
When browsing for stls for a bit case I found a number of cases with a threaded lid, however I found that most used a normal thread, meaning it was necessary to twist a number of turns to open. This version have a six-start thread,…
Most of us have more that one drillbit of the same size but have only a stand or holder that holds one drillbit of that size. This one holds two drillbits of the same size. There is a holder for 1 - 8 mm and another for 8.5 - 13 mm with…
This is a print in place foldable box for the most standard metric drillbits, including the ones needed for tapping and spares for the ‘fragile’ ones. The box is designed to fit any 20x20 printer as efficient as possible, fitting the…
Printed in PLA. The hooks need some support to print correctly. The drill holder shown on the picture is here: https://www.printables.com/model/1380191-skadis-holder-for-ryobi-drill-and-bits
Drillbit wallmount, divided in 3 in slicer to make for an easier print, Printed % infill.
I needed a more compact box for my drill bits, so I designed this one, with latches based on Whity's Rugged Box , and I inverted the upper lip of the box to have a smooth outside. Overall dimensions : 180x75x41 mm Everything is assembled…
Gridfinity insert for Makita D-72855 drill bit set. Insert for 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm drill bits.
DrillBit Organizer 1mm to 10.5mm and Drillbits for M1 to M14 For two drill och every size
This drill bit case is inspired by the hexagonal drill bit set from Hilti. I liked the design but already had a few drill bits so I didn't want to buy a whole new set for the case. So I made a similar design :) This case is quite simple,…
I needed to re-organize my countersink drill box, so why not applying gridfinity system? Took dimensions of my countersink drill bits, added per diameter 0.5mm for making holes. This turned out fine. Used a 1x1 gridfinity box. Filled the…
Just a simple 118 Degree gauge. to check your sharpening angle. modeled after the commertialy avialable metal ones.
I needed to re-organize my drill bit box, so why not applying gridfinity system? Took dimensions of existing insert with the drill bits and made a cut-out model. Used a 1x3 gridfinity box. Filled the base plate with solid plates, I don't…
simple, fast, easy,
A quick drill attachment for winding guitar strings. A bit smaller than some other models for tight tuner clearances. Other winders I printed were crashing into nearby tuners, so I made this as small as possible. Be gentle with that…
gridfinity 4x2x3 for wood drillbits stackable https://buymeacoffee.com/maggmin
Just a small but useful bin.
gridfinity 1x1 for 4 countersunk hex drillbits (+hex key) what else… have a good day :)
Multiboard organizer for drill bits using the SlideCLeat System
Here's a drillbit sharpener I've made long ago. I got my inspiration from "mgx" who built a drillbit sharpener for a dremel. So here is one for the Proxxon IBS/E. You'll also need: 1x screw M3 x 30 mm (hexagonal will fitt well, for fast…
adaptapa DeWalt drill bit case to work with gridfinity note - must have original DeWalt Case. pry out the rubber part that holds the drill bits and press it into the print
The x75 drillbit case that came with my Makita DHP485 LXP drill only fits inside the Makpac one way, ("flat"), and I wanted to fit as many of my tools as I can into it. This holder works with the “Makpac 3” version of the Makita case…
Don't need to look up for something, mainly see if something is missing. Keeps step drill bits and center drill bits in one place. Printer : Prusa MK3S+ Filament : PLA Supports : No / Raft : No Infill : 15% Remarks :
This is an organizer with a lid that slides on and off. You can gently bend the circular tabs in on the lid to make them act like clips to hold the lid on. It's designed to hold the cheap tap sets that you can buy on Aliexpress. It should…
!!! Use it on your own risk !!! It is recommended to use it with slow rotations under 400 rpm !!! This is a Sandingdrum for a drill press or similar. I have designed this because I need something to sanding my 3d printed parts for…
i had some drillbit's that i didnt have abox or holder for and it was getting annoying having them laying in the box for my drill. so i designed this box in sketchup and printed it, the holes is made to small in the file, but i used a .5…
Holds 3, 3.5, 4, 4.5, 5, 5.5, 6mm Drillbits equiped with stop rings. Printing: The top two layers can be printed with a different color to increase readability of the writing. Additional Hardware: 2x Screws 4x35mm for mounting
This adapter is easier to remove, plus has a pin on the side that grabs into the little notch of the respool tool. No support is needed.
Drillbit adapter for 1.5 mm drillbit. Small drillbits can be hard to fasten to the drill, so I needed an adapter. It can probably be rescaled for other drillbit sizes. Remember to use it with the fixed end out.
No need for support. Stores vertical a drillbit size: 1, 1.5, 2, 2.5, and 3mm. and has magnetic trays to store horizontal ones. Use 5 magnets size ø8 x 2.5mm. and put them in when the print pauses. Even when the holder is on its side the…
This is a holder for a few small drillbits i designed for the Ikea Skadis Peboard the right 2 holes are 0.5mm larger to acomodate larger bits. should fit upt to 3.5 mm I designed these for 2,5mm and 3mm bits to store the Drillbits you…
Magnetic drillbits holder. Easy-in and easy-out. 2 models: 2mm - 8.5mm: 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5 4.5mm - 8.5mm: 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5 3mm - 1mm: 3, 3, 4, 5, 6, 7, 8, 9, 10 Designed for magnets…
Sometimes you need XL drillbits for special jobs, e.g. trim or tune holes of hinges, when you standard drillbit exhausts after 40-50mm, the ones shown are total 147mm long. You don't need them very often, but when you need them you know…
This is a holder for your metric drillbits that is used for tapping. Is has both the drill size, and which tap it works for. No support is needed
https://buymeacoffee.com/maggmin
This bit holder is available in 3 versions. With 8 mm (5/16"), 9 mm (23/64") or a combination of the two With 20 mm deep cleat (25/32") Please share your remixes of these, I would like to see your solutions to your needs. That is why…
print the box and then glue the clip so it doesnt rattle around print the box standing, no need for supports my set is a Lenox Twill but a lot use the same box
There are many drillbit organizers on here, but none that I found would accommodate a wide variety of bits: screw bits, large hole bits, tile bits, normal bits, etc. So I created this box as an all-in-one organizer. The top section for…
mini paint drillbit mixer
This is a drill powered paint mixer for small paint dropper bottles like slim army painter, vallejo, reaper or other.
I printed this in PLA+.. Tip: Check the dimensions in your slicers measuring tool before printing to make sure you will get what you expect.
EN 40mm Box Cap for Dremel drillbits box, you can use to close the original Dremel Versatip 40mm boxes IT Coperchio per le scatole da 40mm del Dremel Versatip 2000
The model sits flat on the build plate and supports are not needed. 3D printer: Sovol sv6 plus filament: 3dfuel proPCTG You will need to check your printer for fit of the shaft and the end fitting into the post. Glue in the shaft with 2…
I printed this in PLA+.. Tip: Check the dimensions in your slicers measuring tool before printing to make sure you will get what you expect.
!!! Use it on your own risk !!! It is recommended to use it with slow rotations under 400 rpm !!! This is a Sandingdrum for a drill press or similar. I have designed this because I need something to sanding my 3d printed parts for…
