1011 modeli
NOTE: The new version linked below has much improved clips which are less visible than this version. NEW IMPROVED VERSION AVAILABLE HERE!!…
Wydruk około 5,25 €–6,41 € nettoWstępna wycena jednego wariantu
Rescaled battle droid that prints in parts and fits together as it does in its original LEGO form. This .stl is 400% of the original size. Can be scaled to any size ! This size is perfect as a single pen holder ✒🖋🖊🖌🖍 I printed these parts…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
Hi i designed a Wheel for my Worx Landroid (Worx Landroid M-500) because we have a uneven garden so Ive designed a wheel to fix issues when my wheel gets stuck, and it not get over our stones try it yourself and Test it! I Hope it can fix…
Wydruk około 2,86 €–3,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The two parts of the jetpack must be glued. Requires adapter (included) between grip and hand.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 10,05 €–12,29 € nettoWstępna wycena jednego wariantu
A spikes for better grip that helps a landroid going uphill or in a sharp corner
Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu
easy and fast to print
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
!!! The use of the parts is on your own risk, no liability for injury or damage. !!! Custom knife plate for Worx Landroid M500 (WR165E, model 2020) with 5 blades. Can be used on all cut height settings. After printing of the plate part,…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Wydruk około 11,51 €–14,06 € nettoWstępna wycena jednego wariantu
This is a remix from a print on Thingiverse (https://www.thingiverse.com/thing:126671). For the original model I after a few test prints I saw that most of the dimensions were incorrect or too loose. Also the text was best suited for long…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Meet the Android 🤖" Big movable Eye "👁, the bot with a seriously movable eye. This isn't your standard, friendly green robot. This is a dual-sided companion that’s always got an eye (one very large eye) on the prize. Realistic eye look:…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Wydruk około 6,78 €–8,29 € nettoWstępna wycena jednego wariantu
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x218.6mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Wydruk około 4,83 €–5,90 € nettoWstępna wycena jednego wariantu
Create your own battle droid army and take over the galaxy! If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee (PayPal). Thanks!…
Create a pit droid …. or more! (They work better in groups.) If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee (PayPal). Thanks!…
🖨 Printing Layer Height: 0.15 mm Supports: Yes (recommended for best results) Materials: PLA, PETG, ABS Tips: Print the first two layers slower for better bed adhesion and cleaner details. Use a well-calibrated printer for optimal fit of…
Create your battle droid army and take over the galaxy! If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee. Thanks! Check out my…
Remix designed for use with the Bambu Labs AMS, colors are as accurate as possible to BD-1 in Fallen Order (see reference images) using White, Red, Silver, and Black PLA (PLA+ is recommended for the Body and Silver color, as some of the…
Updated version of my kit card of the BD-1 droid from the Star Wars: Jedi Fallen Order game. Model has minor improvements all over, and the major improvement of no more vertically printing clips. This should translate into much fewer…
This is a posable model of the ED-209 from the movie Robocop. It is a kit and all the joints are posable. Default color of the model is grey. so if there is no color code at the end of the model name, it means it is grey. G - grey B -…
I design the model based omnidroid v08 in the movie. Obviously its not 100% replica since I had to modify few part to make it the model reasonably movable. The legs, claws and ball shoulders and head are movable. There are five parts in…
Congratulations, You are being rescued Its time to re-live the Ghorman massacre and the Scarif vault with your own KX unit! The model uses Dummy 13 by @Soozafone as the base The frame was rounded and split up for the extremities to give…
Create your own DT series Sentry Droid and take over the galaxy! Description: This is a KIT CARD of a DT series Sentry Droid. After a long time I felt like designing a kit card again. This will be a great gift for friends who love Star…
3D Files for a 1:12 and 1:48 scale version of a B2 Battle Droid! This is 1 pose of a 12 pose set. If you like my work and wish to support me or get other poses, check out my Patreon here: https://patreon.com/galacticarmory
A great Wall Art of the Evolution of Star Wars Droids. Do not forget to upload your makes, thanks ! Inspired by a sticker “Evolution” Wall Art Collection : Lego Minions Darwin Alien Rabbids (Les Lapins Crétins)
Roger! Roger! Have you always dreamed of commanding the galaxy's largest droid army, but found yourself a little short on galactic credits? Thanks to Baktoid Combat Automata, it's now possible! You can now field a legion of droids without…
remake I made of a model and made it easier to print and also made it so that it could be enclosed.
I wanted to print the kit card option as a gift, however, it is a few millimeters larger than a Prusa Mini bed. So went for a simple remix to fit the Kit Card version to the Prusa Mini bed, and changed the frame only.
This is the robot from the icy snowy planet in the Fifth movie and not screen accurate. Model is finished and print verified. This model is best printed at 100% scale on FDM. SLA/SLS - go as small as you'd like. I find on FDM, 120% to…
I'm a huge fan of Star Wars and the Droids from that universe. Unfortunately, I don't have enough space for full sized models, but I do have a couple of free shelves that I have slowly been filling up with Droids and Robots from various…
Star Wars Droid BD - 1 Offset and solidified to print small.
Astromech droid. Print and enjoy. M3 Screws to use.
Open in Fusion 360 and you will find parameters under the modification menu. See screenshot. You can change the diameter, the thickness of the disc, the number of blades, etc. I used CNC-Kitchen short m4 thread insert. Don't forget to…
Star Wars episode 8 & Andor Droid Access Panel This a basic "Free Version". The Full Multi-Part Version is linked here https://retrorhobbies.etsy.com/au/listing/4300398181/star-wars-droid-access-control-panel Retro Realistic Hobbies…
B1 battle droid for LUCKY 13 Head : Assemble the head with the two parts (may need some sanding) Weapon : Cut out the supports using cutting pliers Print Settings : Material: PETG Layer height: 0.12mm Supports: no Infill: 15% ------ Happy…
I printed this model but found the two bottom supports the phone actually rests on were too far apart for Android mobile devices. So, I slightly modified these supports to better hold iPhones. Please see additional print info. in the…
Bring the galaxy's most beloved astromech droid to life with this incredibly detailed 3D printable STL model that captures every iconic curve and panel line. This stunning figurine showcases R2-D2's classic cylindrical design with…
Added 10/11/2025 V3 rim center w/o connector parts (Schraubverbinder) (Felgenschüssel ohne Schraubverbinder) and suitable tire with M3 metric threads. Printing the threads in tpu might fail but then you can just screw them in. Threads for…
Hello there! Tired of your fridge running away only to be taken by some jawas and sold to the first scruffy-looking nerf-herder that comes their way? It seems like it's a problem that has plagued us for generations… or at least since…
This a a Dummy 13 Droidbait!!! that's all i can think of to say.😅
Handy UV and elements cover for your landroid mowing robot. May be easily adapted to different mowers. This is update Mk2. I made it 2cm higher after observing a couple of collisions. Option with ridiculous Cyberpunk vibe provided as…
Add a galactic twist to your holiday decor with this pack of Star Wars-themed Christmas ornaments. Featuring iconic characters like , Yoda, R2-D2 and C3PO, these 3D models are perfect for creating unique and personalized ornaments. Each…
This spoiler is a remix, made from a RC Car Spoiler that i found on thingiverse. The spoiler is put together using super glue I used dobbeltsidet tape to mount it on the Landroid. Recommend to print in ABS or ASA Let me see them makes and…
Simple Vesa mount for ipad or android tablet with various size and various screw support (m4,m5,m6). there are three screw variation, m4, m5 and m6. all flat heat, so it can flush without bumping the ipad or tablet. there is short,…
The model is split in to several pieces to fit on to a printer with a build volume of 25 x 21 x 21 cm or 9,84 x 8,3 x 8,3 in. (Example Prusa MK3) All parts are rotated for optimal printing with minimal supports. Besides the printed parts…
The wheels are for WORX Landroid PLUS WR148E. Diameter 220mm. The Weigths from the old wheels can be used (have to be used) Improves spinnig wheel problem. I print the Cover and Hubs in ASA (can be printet also in PETG or PLA) The Tire is…
Inspired by all the other Star Wars Lucky 13 skins, e.g. Lucky 13 Mandalorian (With Jetpack and Rifle!) by CrazyBird199 | Download free STL model | Printables.com Lucky C-3PO by egz | Download free STL model | Printables.com Lucky…
Rescaled 10:1 Lego B1 Battle Droid The body has been split, to be assembled using the pegs, due to issues with the clips, on the head and legs, flexing at this scale. Assemble the body “around” the head and legs. Friction fit should work,…
a b1 battle Droid but as a Lego figure duck
My take on studded wheels for the Worx Landroid robotic mower. It's heavily inspired by https://www.thingiverse.com/thing:3750909 , but I designed it from scratch in OpenSCAD. It's been tested on an S500i and an M700. So far, it works…
The DUM-series pit droid was a model of repair droid manufactured by Serv-O-Droid, Inc. Pit droids were cheap, expendable, and incredibly durable repair droids. Pit droids were programmed with a sense of urgency, though their minimal…
phone holder for your desk shelf, inspired by balolo cokcpit system. can be used for ipad or android tablet too.
Astromech droids were crucial companions for starfighter pilots across the galaxy. These droids were designed to perform a variety of duties, from simple repairs and maintenance to navigation and even piloting functions. Astromechs often…
Layer height: 0.15 Initial Layer Height: 0.4 How to get great quality: Legs and arms must be printed vertically (Be careful to not F*ck up with Z axis) Slow the printing process (I did on 120mm/s) Tree support is a must 10% infill 65°…
use at your own risk, you have a chance of this breaking off and getting stuck.
If you don't have Homey and still would like to print Marvin The Paranoid Android from the Hitchhiker's guide to the galaxy this thing provides you with a head, neck, visor and eye lids. Bottom part of the head and neck attached to the…
B2EMO : Andor : Star Wars Droid. This has been available for a few years now -→ buried as an add on option in another model of mine. Hilarious. I spent 20 minutes looking for it thinking that It was posted as a stand-alone. Nope.
The Unifi Dream Router looks like an iconic droid from long time ago in a galaxy far, far away.... I came across this design but it wasn't really made for printing. I decided to clean it up to make it more printable. With it, the Unifi…
Model of an R6 unit astromech droid.
This case is a remix of the ODROID N2 case sold by AmeriDroid . This version makes it easy to print without supports and requires no hardware to use with the N2/N2+. The case protects the components from damage and dust. Special thanks to…
The aim is to develop this design to include the sounds made by Star Wars droids as depicted in the popular films, and to make it dance to the 'Imperial March' theme song. May the force be with you! I modified the original Otto design,…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Here is my attempt to create the droid popper / thermal detonator from Star Wars It is scaled for use with 6 inch figures, 12 inch figures and also as a life size prop for cosplay. Any issues please let me know. Have fun!
Add a galactic twist to your holiday decor with this pack of Star Wars-themed Christmas ornaments. Featuring iconic characters like , Yoda, R2-D2 and C3PO, these 3D models are perfect for creating unique and personalized ornaments. Each…
Hi Alex, I remembered you were after one of these prior to Xmas. Hope it helps with your project, Cheers Jace
Cutting disc with 6 blades compatible with WR167E - Landroid M700 Plus This is the new version of Landroid with the Hex adapter below the cutting disk. Diameter and total height are the same of the stock cutting disk. Just use M4 standard…
I fixed the joints of the arms and legs. Now they don't fall out. The range of motion has decreased a little bit.
Heckflügel für Worx Landroid
If you have a Worx Landroid that has traction problems specially with tall grass or slopes, adding weight to it, particular weight behind the rear axis, will improve its traction significantly. I'm not the first to come with this solution…
Here is our version of BD-1 from Star Wars Jedi Fallen Order video game. This is whole stl file we will be putting up cut up version on soon. We are also on gumroad where we list cutup/slicedup props, heres few links of sweet prop files…
There are some usb-c dust protectors on printables but they were too bulky or too shaky for me. That's why I designed my own protection for my smartphone with a Pitaka protective cover. if you need any adoption or change let me know :-)…
Having recently joined the Droid building community I wanted to give something back with this little bench test inspired by the MSE-6-series repair droid, aka "Mouse Droid". It doubles as a great handout at conventions and meetups to…
CD Mount for 10.26" Carplay external screens that can be found on Aliexpress/Amazon. The one im using is from Aliexpress OBDPEAK T20. It uses the 4 clips mounting system. This remix version has the following feature from the original.…
The EG-6 power droid by Veril Line Systems was an ambulatory power droid. As their popularity rose, Industrial Automaton produced a knockoff of the droid under its own product series: the GNK power droids, also known as gonk droids…
Found these at https://facepunch.com/showthread.php?t=1304034&page=6 Also found AnyCad converter with the click of a button turned them straight into .OBJ and .STL's http://www.anycad.net/the-free-3d-model-converter-anycad-exchange3d.html…
USRockets did an amiazing job on R2D2 that I have whipped up several heads, I have sucessfully printed this and will post pics of the finished painted model soon. Other components can be found here…
This model is compatible with the lego system.
The super cute and awesome B2EMO droid from Andor Printed in 0.2 layer 0.4 nozzle Scale the parts to youre wish, this one was printed at 200% recommend atleast 200% (with 0.2/0.4) or bigger. you can print the red and metal parts…
This is a slide on for the Worx Android M500 Plus (and possible other models...). I have printed the new rear wheels from the great design from: https://www.printables.com/model/441847-wheels-for-worx-landroid-plus-wr148e and now the…
Das Modell wurde von mir erstellt, um mein eigenes NAS zu konstruieren. Es ist nicht zu 100% identisch mit dem Original aber die Außenmaße passen soweit.
This isa model of the IG-11 & IG-88 Droid I have in my collection.
I made this model back in High School when i was more creative. Its definitely not the prettiest model, I would even go as far to say that i dont think its printable. HOWEVER , i think its a good start for someone who wants to build a…
Commercial use is NOT allowed for this model.
I picked up one of these cheap wireless Android Auto/Apple CarPlay displays from Amazon (specifically the 9.26" one from VSTARK which was going for about $189 before coupon at the time of this writing). Rather than plopping it on top of…
R4-D5 : Star Wars Droid
GNK-Buddy: Articulated PiP Star Wars Gonk Droid Move GNK-Buddy's legs and feet! Open it up for some extra storage! My re-creation of the Star Wars Gonk Droid, melding aspects from different designs as well as adding my own flare. Created…
Use it to mount a multimedia unit on the original Navigon mount in your car. Fits: Volkswagen Up! Seat Mii Seat Ibiza Skoda CitiGo
Made the wheels from ABS+ (note: these are a tight tolerance, used acetone to lightly soften whilst bolting on) Wheels have holes for press in M3 inserts this is to mount a steel weight. I profile cut a 10PL and match drilled to fit.…
As requested. A Mini-13 version of the IG 11 Assassin Droid. The parts below are all that are needed to convert a Mini 13 Armature into an IG11. I recommend printing the head at .12 layering to get best details. The Chest Piece can be…
Bonjour, vous trouverez les 22 pièces du robot BD-1 en 22 fichiers séparés pour une impression en plus grand ou pour juste imprimer une pièce à la fois modèle original Star Wars BD-1 Droid Kit Card Hello, you will find the 22 parts of the…
IMPORTANT. Print using PETG and with TREE SUPPORTS so that the figure and the parts dont get shot down in flight by the government. (11/4/25 UPD: Thickened the arms and legs since it wouldn't load correctly in Orca Slicer.) (MEGA-UPDATE…
If you purchased an android headunit (Teyes, Mekede, Junsun..) for your vw golf you get a pair of usb ports. This adapter lets you mount those usb ports behind the gear shifter. I mounted mine just with friction but if you want you can…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Brim (Recommended) Supports needed Scale it as you like :)
This model is compatible with the lego system.
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Komplettrad für bessere traktion. Felge aus ASA-X, reifen aus TPU bzw TPE Felgen sind mit 2kg blei gefüllt und somit ist die traktion perfekt. ( 2kg Bleikugeln 4mm Durchmesser ) Wurde dann mit epoxidharz ausgegossen Reifen wurde mit 50%…
this is a two part easy print disc, with a disc diameter of 200mm for the Worx Landroid 1500L Print instructions Category: Outdoor & Garden Summary this is a two part easy print disc, with a disc diameter of 200mm for the Worx Landroid…
This model is compatible with the lego system.
