Liczymy pasujące modele…
make sure your bed is clean before using it!! print in PLA using support you can freehand level your bed or use the g-code (it will move the hotend to 4 corners) demo video Gcode : G28 ; home G90 ; use absolute positioning for the XYZ…
These are dashboard clips for an Oldtimer. The Ford Transit MK2 (1985). The old clips breaks due the process of long aging and the dashboard cant be secured. These clips fit perfectly into the opening and are secured by the long plastic…
Es muss zwingend mit Farbwechsel gearbeitet werden. Die ersten Schichten mit einem transparenten Filament. Die darauffolgenden mit einem schwarzen.
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
Органайзер для настольной игры Робинзон Крузо: Приключения на таинственном острове. Вторая редакция. The organizer was designed taking into account the internal dimensions of the box 288* 288 (Russian version of the game). Please check…
The rear camera that comes with the RedTiger F7N Dashcam is intended to be mounted on the rear of the car and the bracket that in included is limited to mounting on horizontal surfaces. This bracket will allow you to mount the camera on…
i use it to mount this dti gauge: - https://amzn.eu/d/1kfSElo axis can be moved about as needed to test level of most parts of thebed. i got my bed to flat using this method and adding aluminum tape under the bed in low spots. clips into…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
Made to attach the F7N rear camera (and any other system that uses this yumcha rear) to the rear window on the inside of a ute. Can change the angle for a sedan if there's any interest.
This is a set of gridfinity based containers/bins which I created to fit a TS101 & TS100 soldering iron and other soldering related tools. There was always something I didn't quite like about existing designs and wanted something custom…
I found printing with TPU using 5% ‘gyriod’ infill, and combine every 2 layers @ 232 C gave me a strong shell with an airy feel.
The is a tough case designed to protect a Dial Test Indicator (DTI) based on the “ Rugged Box v2 ” by Whity , which in turn was based on the " Tool box parametric " by Yanev . The whole case is tiny, just 92mm by 67mm by 33mm, enough for…
you need to print 4x Large rectangles: 7” x 11.5” 2x Large right triangles: 8” x 11.5” 4x Medium rectangles: 6” x 4” 2x Long lines: 10” x 2.5” 4x Short lines: 6” x 2”
Print with PETG Change color on Z=3,60
I got tired of having to hold a book and my phone (for the flashlight) when reading to my son at bedtime, so I designed and printed this to set my phone in. All important dimensions are shown in the drawings in the pictures. This is…
Lidské měřítko asi 176 x 150 mm materiál bílé PLA
Für das LMC Wohnmobil, Abdeckungen für die Zierleisten. Print Settings Printer Brand: Anycubic Printer: i3 Mega S/Pro Rafts: No Supports: No Resolution: 0,2 Infill: 100% Filament: OWL PETG Category: Vehicles
ich bin oldtimer fan und das orginale von früher hat mir nicht gefallen daher hab ich selbst eins nach meinen geschmack
I designed this fitting to connect 1/2" Liquidtight Flexible Non-Metallic Conduit (LFNC-B) to a standard electrical box. Use the 1/2" knockout if possible, but there is an adapter included for the 3/4" knockout. SCAD file is included.…
Print with PETG Change color on Z=2,20
Clamp for 8mm DTI and for magnetic DTI-holder with 10 and 12mm rods. Additional hardware needed: M6 Nut and Washer M6 threaded rod - 40mm long As the printed nut is not really strong I highly recommend to fabricate it from aluminium or…
This is a token holder for bigger sized tokens like in the german edition of the game. It is compatible with the “ Robinson Crusoe (2nd edtion) Organizer ”.
This little do-hicky will allow you to attach the tuner part of a Snark tuner to the hooks on your Goodtime banjo. I print it at 50% infill, .20mm, PLA+. This is a remix from: https://www.thingiverse.com/thing:4180336 - I reshaped the…
Crash Derby Car – Classic Beetle Inspired Design This 3D model was created specifically for the Printables Crash Derby competition and is inspired by the iconic design of the classic VW Beetle . The model is fully compatible with the…
Klein model van een Duitse jagdtiger. Erg snel te printen. Support is nodig, maar erg simpel te verwijderen. Veel plezier ermee! Voor montage, lijm het kanon op de hull. Lijm de tracks op de hull. Klaar! Tip: het kan slim zijn uitstekende…
I needed one of these (being an insomniac isn't a cool life feature), so I downloaded and printed one out on MakerWorld and found it inadequate. It just kept falling over all of the time as soon as I moved. So with necessity being the…
This is a tool holder adaptation to hold a DTI gauge in myford "dixon" type tool post. Suitable for any Myford ML7 or 254 varients with a suitable toolpost. 3 different variations, pick which one suits you best. Made from PLA or PETG it…
2 part adapter bracket for a cheap digital dial test indicator i recently purchased to use a magnetic base http://www.banggood.com/0-12_7mm0_5inch-0_01mm-Digital-Dial-Indicator-Electronic-Dial-Gauge-p-954736.html for use with…
PET-G, 0.2 layer, 0.4 nozzle, 100% filling. + everything is treated with dichloromethane.
Classic design → classic bicycle dynamo wheel / Fahrrad Oldtimer Dynamo Antriebsrad → 36 Theet → 0.4 Nozzle → 0.2 mm Layer Height → 20% - 30% infill → TPU → No support → In: 20 | out: 24 | wheel height: 11 - 12 mm → no long-term test
I designed and printed a set of mounts to hang my Ruler set I got on amazon from ASCENDTING. https://www.amazon.com/gp/product/B09KKZQQZK/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1 I printed in PLA at 100% infill to insure they were…
A remix of the Screw You Present made by Sandcrab that makes the screws harder to take out.
Get ready to have a good time with Scaaaarrr! Printed on a Halot One Resin printer. Rotated it 45 degrees on its back and added supports. Due to the high angles, some parts will droop, so keep that in mind as you print! Category: Other
Based on my IKEA Tradfri button template A simple shortcut button made for the IKEA Tradfri remote so I could turn it into a shortcut button. Print settings For the colors, use M600 color swaps between the parts. This is perfectly doable…
Fahrrad Griffe Oldtimer / antique bike grips / Oldschool BMX → 0.4 Nozzle → 0.3mm Layer Height, → 50% infill, → TPU → No support → für / for Lenkerdurchmesser / handlebar diameter → 22.2mm → Tiefe / depth → 95mm
If you have one of these super cheap 2U Rackable Systems Server Chassis (Sometimes sold as SGI Servers as well), you may get into trouble keeping the rear CPU cool enough. I got into this issue with my Supermicro X8DTI-F Dual Socket 1366…
1st version: created using original measurements. 2nd version: created using printing optimised values. --- actually printed it in PLA. have to check if lamp gets so hot that PLA gets deformed --- -> can confirm it's working just fine!…
This is an extension for “ Robinson Crusoe (2nd edtion) Organizer ”. It fills the gaps of the original organizer and thus allows for vertical storage of the game. NOTE: My game board has different dimensions depending on which way you…
Türgriffabdeckung für die alten Fiat Modelle. Die Klammern müssen liegend gedruckt werden und in die dafür vorgesehenen löcher geklebt werden sonnst brechen diese. Schön auch wenn man es schleift und Lackiert. Oder wie das Schwarze in ABS…
Fahrrad Griffe Oldtimer / antique bike grips → 0.4 Nozzle → 0.3mm Layer Height, → 50% infill, → TPU → No support or brim → more print bed adhesion → für / for Lenkerdurchmesser / handlebar diameter → 22.2mm → Tiefe / depth → 95mm
Fahrrad Griffe Oldtimer / antique bike grips → 0.4 Nozzle → 0.3mm Layer Height, → 50% infill, → TPU → No support or brim → more print bed adhesion → für / for Lenkerdurchmesser / handlebar diameter → 22.2mm → Tiefe / depth → 95mm
Needed a DTI holder for my little Mitutoyo DTI, all the ones I could find were for smaller toolholders not the S2/T2 size. The DTI is attached with a M6 bolt (thread modeled in) but I have included the fusion 360 file to modify as you…
CPL filters available to buy for this dashcam are insanely overpriced and pretty flimsy looking. A generic 37mm filter is way cheaper and, with this adapter, you can put other filters too. 37mm happens to be a perfect filter size as it…
Erstellt für ein Rollo aus einem Hubdach am Wohnmobil, wird in die Kederleiste eingeführt. Gedruckt mit ABS oder Pla-Flex beides hat sich bis jetzt bewährt auch bei hohen Temperaturen.
This is a dual case for an original stream deck and a Deej. The Deej is 5 linear 10k slide pots with 12 mm buttons. It was inspired by many different Deej's and stream deck holders, but is my own take on it. I took inspiration from:…
Classic bicycle dynamo wheel / Fahrrad Oldtimer Dynamo Antriebsrad → 2 Versions: 36 Theet | 72 Theet → 0.4 Nozzle → 0.3mm Layer Height → 20% - 30% infill → TPU → No support → In: 20 | out: 27 | wheel height: 11 - 12 mm → no long-term test
Crash Derby Car – Classic Buggy Inspired Design This 3D model was created specifically for the Printables Crash Derby competition and is inspired by the iconic design of the classic VW Buggy . The model is fully compatible with the…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bkmAB47PXj1 Turns a standard socket into a head wrench for your Goodtime banjo. Fits my socket nicely, but YMMV. Category: 3D Printing
Are you or your partner tired or ruining the sheets due to your foot fidgeting tendencies? Then say hello to the product for you! Print this on it's side for strong layer direction. Tie any cloth, sheet, fabric, towel. or rag you want to…
Three young otters in a shared round bed with a blanket. One is curled up beneath covering its eyes. Another is fighting to get out of bed and being pushed back. The third is laughing with arms in the air. Momma otter is shushing the…
Gear shift cable protection ensures durability, smooth performance, and reduced maintenance by shielding cables from wear, corrosion, and environmental elements.
Piece pour monter le décodeur sur le coté tout en le gardant amovible facilement. Des trous au format VESA 75 et 100 sont prévus mais pas testés, j'ai utilisé du double face. Imprimé comme monté en PETG noir (voir photo), le modèle étant…
This Jagdtiger tank stl is a 3d printable scale model of a real german ww2 armored vehicle for display and diorama projects. Get a detailed tank model for wargaming terrain, model collections, classroom history builds, and realistic…
Žák má oblíbenou počítačovou hru Minecraft. Zde se setkává se stvořeními, nazývanými Mobové. Žák se rozhodl pro vymodelování svých oblíbených.
A sign that says "GroupToSpendTime", made as a gift for friends.
Accidentally chipped the side panel of my Eternal Rival acrylic case somehow. Modeled a quick side panel and printed it on both my Ender 3 and Voron Trident, fits as expected. Only uploading to clear up stl space.
ich libe berge fon südtirol da dachte ich machne 3d karte draus
Trying out the experimental export to Thingiverse function on 3DTin.com! Sweet! http://3dt.in/q9e Licensed public domain - I claim no rights at all. Now with 300% more file choices!!! Print instructions Unassociated tags: doctor who…
Designed a case for a generic DTI from ALIEXPRESS. Case is divided in 2 parts, bottom case and lid Print Settings Printer: AM8 Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: NA PLA Category: Containers
The RedTiger F7NP Dash Cam is designed to be easily removable with friction fit holding it in place. I found that the friction fit doesn't work well. Especially when putting up a sunscreen in the front window where that would often knock…
🇮🇹 Italiano Perno di ricambio stampato in 3D per il coperchio del bidone carrellato da 240 litri della JCoplastic, il modello utilizzato da SEAB per la raccolta differenziata in Alto Adige. Il perno originale in plastica tende a rompersi…
Holder for Dialtestindicator fits for 12mm QCTP Toolholder.
Hey there, ^^ Here’s the crystal I modeled myself—it’s meant to be displayed. Important: You’ll need Glow filament. :) There are already so many 3D-printed crystal models in the communities. 😇💎 But I figured I’d print my own. I’m happy to…
MGN9C linear rail dti mount for mounting magnetic type dti
Hey there, ^^ Here’s my custom-designed GLOW HERE MARKER. ✨🕯 It’s kept very simple and is meant to be printed out, placed on furniture or cabinets, so you don’t bump into them in the dark. 😅😂 Two snake heads hold up the “HERE”: “I’m right…
CPL filters available to buy for this dashcam are insanely overpriced and pretty flimsy looking. A generic 37mm filter is way cheaper and, with this adapter, you can put other filters too. 37mm happens to be a perfect filter size as it…
