Wyniki wyszukiwania: dustcover

Sortowanie

52 modeli

P
PrintablesThomasZecher

Dustcover MK4 / MK4S with hole

Dustcover MK4 / MK4S for Z-axis with hole for additional cover.

Pobrania
590
Polubienia
103
Ocena
4,95
P
Printablespaddybuss

Winwing / WINCTRL Dustcovers for URSA MINOR 32 Throttle Metal, 32 PAC Metal and 32 AGP Metall

Dustcover for the winwing URSA MINOR 32 Throttle Metal, 32 PAC Metal and 32 AGP Metal. Printed in TPU 95A to avoid scratches

Pobrania
429
Polubienia
26
Ocena
5
P
PrintablesSandon

Dustcover Hinge for Thorens Turntables [New Version]

Hinges for Thorens turntable dustcovers, for models TD145, TD160, TD165, and TD166 Mk II, with a number of improvements and a similar look and feel to the original. Prints well in both PLA and PETG. Stronger hinge pins, correct alignment…

Pobrania
245
Polubienia
5
Ocena
0
P
Printablesdhiertz

dustcover for Voopoo Drag X

This is a Remix of the design by er2kien uploaded on thingiverse. The original design didn't fit well on my Voopoo DragX. I printed with supports. Note! Please have a look what filament you use and adjust the scale. With this filaments I…

Pobrania
185
Polubienia
33
Ocena
0
P
PrintablesSandon

Dustcover Hinge for Thorens Turntables

This model has been depreciated: see https://www.printables.com/model/1288871-dustcover-hinge-for-thorens-turntables-new-version for the updated version. ----- A redesigned hinge for Thorens turntables models TD160, TD165, and TD166 Mk II…

Pobrania
151
Polubienia
6
Ocena
5
P
PrintablesCoat

Commodore 64/Vic20 dustcover

A dustcover for the keyboard of your Commodore. Comes in different flavours, with the chickenlips-logo and as a blank cover. Also in one piece or splitted in two parts for the more standard-sized 3d-printer. Stp-file is added. The…

Pobrania
143
Polubienia
24
Ocena
5
P
PrintablesArnout

dustcover bosch ebike

Modelled based on a picture not measurements, stays in place when riding. Print in tpu or PP

Pobrania
139
Polubienia
7
Ocena
0
P
PrintablesRedeye

Masuter PRO CNC dustcover

Small prints to avoid getting sawdust oder dust in the controller of your maschine.

Pobrania
132
Polubienia
18
Ocena
5
P
PrintablesMeeder

Pendix eDrive Dustcover

This is a dustcover for the battery mounting plate for the Pendix eDrive e-bike system. Print instructions In the 3mf files for both PLA and PETG I added modifiers for the following. 1) first 2mm is printed with 100% infill because this…

Pobrania
96
Polubienia
4
Ocena
5
P
PrintablesLiviu Chiribuca

Technics SL-3300 or SL-3310 dustcover hinge

This is the upper part hinge, to replace the acrylic tabs when they break on Technics SL-3300 turntable. Might fit other Technics turntables with tabs molded into the dustcover. Please post in the comments if you used this on another…

Pobrania
86
Polubienia
6
Ocena
0
P
PrintablesNeoRame

Dustcover V2 for 2BitBoys Camera+

Second version of my simple Dustcover to protect the camera sensor on 2BitBoys Camera+ Mod for GameBoy Camera. This Cover is compatible to the botton Lens Sleeve Cap from HERE . https://2bittoy.carrd.co/

Pobrania
75
Polubienia
4
Ocena
0

Garmin dustcover

Slim dustcover for garmin smartwatches. Works great and snaps in place nicely, yet is easy to remove when needed. Printed in TPU.

Pobrania
59
Polubienia
10
Ocena
0
P
PrintablesIsaac Diggs

Dustcover for Corsair Carbide 200R

I ordered the Corsair Carbide 200R Case unknowing that there are no Dustcovers included for the Fan or radiator openings. The Top Covers are just plugged in the existing mounting holes for the fans. the sidepanales are screwed in with the…

Pobrania
58
Polubienia
4
Ocena
0
P
Printablesjohn3d

Mister Multisystem MMS 2022 Dustcover Mod for an Oled-Display.

A modification of the Dustcover for the Mister Multisystem MMS 2022. i2c2oled-project: https://github.com/venice1200/MiSTer_i2c2oled Wireing to RTC1.3: https://misterfpga.org/viewtopic.php?p=26036#p26036 Oled-Link:…

Pobrania
53
Polubienia
8
Ocena
0
P
PrintablesRCNet

Ryobi/Dremel Flex Shaft Cap/Dustcover

This is a cap/dustcover for the Flex Shaft adaptor that works with the Ryobi 12V rotary tool (#TMV01). It will also work with Dremel flex shaft adaptors, as the collars are pretty standardized. The Flex Shaft tool is a handy addition to…

Pobrania
50
Polubienia
16
Ocena
5
P
PrintablesJan Janßen

Z Axis Dustcover P1S

Little Dustcover for the Z Axis holes.

Pobrania
48
Polubienia
7
Ocena
0

SUNLU SP2 Dustcover for heater

Abdeckung für den SUNLU SP2 Filamenttrocker- Heizeinheit, um das eindringen von Staub zu unterbinden.

Pobrania
46
Polubienia
8
Ocena
0
P
PrintablesTarz

Colt 1911 .45 ACP Magazine Dustcover

A simple, fast printing, TPU dustcover for Colt 1911 .45 ACP magazines. I have not printed this in other than TPU so adjustment may be necessary in other filaments. A new Colt magazine was used for design. It will likely fit clones,…

Pobrania
43
Polubienia
5
Ocena
0
P
PrintablesAndreas G

Pipe Dustcover

If you need other dimensions you can scale the model or feel free to leave a commment.

Pobrania
43
Polubienia
4
Ocena
0
P
PrintablesRick Peters

prusa mini axis motor dustcover and cable protection

This is my first published print so please be gentle. I combined the designs from https://www.prusaprinters.org/prints/70829-prusa-mini-z-axis-dust-cover and https://www.prusaprinters.org/prints/30855-prusa-mini-z-motor-cable-protection…

Pobrania
39
Polubienia
7
Ocena
5
P
PrintablesInsaniaxs

Holzmann TS250 Dustcover

Those are two magnetic dustcovers for the Holzmann TKS250 tablesaw. The dust emission from the front ist one of the main flaws of this saw. There are some solutions out there. But most of them are very complex. Mounted via magnets 8x3mm.…

Pobrania
39
Polubienia
6
Ocena
5
P
PrintablesBRCD.TECH

Lexus headlamp dustcover

Lexus headlamp dustcover FOR LEXUS LX300. LX450, LX470, LX570, LX600 (CHECK ONLY ON LX470) WITHOUT HOLES FOR WIRES Пылезащитная крышка для фар Lexus. БЕЗ ОТВЕРСТИЙ ПОД ПРОВОДА REMIXES ARE WELCOME!

Pobrania
38
Polubienia
0
Ocena
0
P
Printablesjohn3d

Mister Multisystem MMS 2022 Cart Dustcover Mod for an Oled-Display.

A modification of the Cart Dustcover for the Mister Multisystem MMS 2022. i2c2oled-project: https://github.com/venice1200/MiSTer_i2c2oled Wireing to RTC1.3: https://misterfpga.org/viewtopic.php?p=26036#p26036 Oled-Link:…

Pobrania
36
Polubienia
4
Ocena
0
P
Printablesenvy

Eurobox Handle Filler / Dustcover

For some of my euroboxes, I wanted to close up the holes left for the hands so that I can store them outside-ish without insects crawling into them. These fillers fit into “Eurobox NextGen Economy” made by ab-in-die-box.de. Printed in DAS…

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesJan124

GRX 810 Dustcover

Dustcover for GRX 810 left+right print with TPU With M4 thread for removal

Pobrania
33
Polubienia
4
Ocena
5
P
PrintablesNeoRame

Dustcover for 2BitBoys Camera+

I simple create a Dustcover to protect the camera sensor on 2BitBoys Camera+ Mod for GameBoy Camera. https://2bittoy.carrd.co/

Pobrania
32
Polubienia
3
Ocena
5
P
PrintablesKLandy

USB dustcover with Protector for powerbutton

I designed this dustcover for my NAS, it also serves as a protection for the powerbutton to prevent accidental operation, There is holes so the LED is still visible. Printed with Bambulabs PLA at 0.2mm and 15% infill. Not much more to it…

Pobrania
29
Polubienia
3
Ocena
5
P
PrintablesApfelwurm

Neutrik NAUSB-W Cap / Dustcover

I needed a Dustcover for the Neutrik NAUSB-W on my CNC Machine, so i quickly built it parametrized with FreeCad. I've printed it on my MK3s with PETG with the 0.2 speed profile on a 0.4 nozzle and it fits perfect. If you need other sizes,…

Pobrania
26
Polubienia
4
Ocena
5
P
PrintablesHariboSnackbox

Filament Spool Dustcover for Filament Racks

FilamentRacks are nice but storing the spools in bags always felt a bit wonky. I was searching for some kind of case to store my filament spools but everything i found was either overengineered or was meant to print out of it, i just…

Pobrania
25
Polubienia
5
Ocena
0
P
PrintablesKowa

Jack Socket Dustcover ¼" Inch

Dust protection for jack sockets with a diameter of ¼" Inch (for guitar amplifiers etc.) for unused inputs. _________________________________________________ Staubschutz für Klinkenbuchsen mit einem Durchmesser von 6,5mm (für…

Pobrania
24
Polubienia
7
Ocena
0
P
PrintablesCorpseGrinder

C14-Plug dustcover

Well its in the Name :D

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesJohn

WINWING / WINCTRL Dustcover For URSA MINOR 32 Throttle

a dustover for the WINWING / WINCTRL URSA MINOR THROTTLE METAL, that utilizes the "screw(holes)" on the engine panel. Also easy to remove Printed in: 60% infill, grid, fast (0.3mm) Disclaimer: It maybe wont work with your printer, since…

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesJASII

Miniot wheel turntable dustcover

320mm x 320mm minimum bed required Printed with Prusament PETG; Lipstick Red Urban Grey Signal White Ultramarine Blue Jet Black

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesRGabor

Dustcover for consolized Anbernic RG35XX H

Loose-fitting dust cover for your consolized Anbernic RG35XX H. Enlarged, loose-fitted version of "Simple Cover for Anbernic RG35XX H by amd" with an open backside and vents along the edges.

Pobrania
15
Polubienia
6
Ocena
0
P
Printablesahorn

Simple Cardboard DexArm Dustcover

This is a simple cardboard dust cover design for the Rotrics DexArm. It can be cut out with a knife, scissors, lasercutter etc. You need 926mm by 556mm of cardboard. It is designed for 4mm thick cardboard - but the shipping card board box…

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesPatrick

Sideways vent and dustcover for Profitec Pro 300 espresso machine V1.1

Enhance your Profitec Pro 300 with this custom water tank cover, modelled to efficiently vent steam and humidity to the back of your machine while keeping dust out. It also creates additional storage space on top of the unit for a…

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesMisterJ

C13-C14 dustcover

Cover which easily plugs into a C13 or C14 socket to keep them free from dust.

Pobrania
10
Polubienia
4
Ocena
0
P
PrintablesFrankB

Makerfarm Prusa i3v dustcover

It's called a dustcover, but I made it to keep my fingers off of the board while I'm using the knob. Print solid with the top down. It does not go all the way to the top-outside edges to allow for the screws. The island in the middle…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesMasterE30

Dustcover W638 rear seat lock

I converted my Mercedes V-Class to an camper van. The Rear Seat locks are nut used and dust can going into it. I made this cover to close the locks. 2 little openings are on both end, so you can use an tool to remove them if needed

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesMecki

Staubkappe Seestar S50 Pro - Dustcover

Da ZWO immer noch keine Staubkappe bei den Seestars mitliefert, muss man eine selber bauen ;-). Gedruckt mit TPU A95. Schichthöhe 0,2mm, Nozzle 0,4 oder 0,6mm Infill sollte vermieden werden: Perimeter 3, oben und unten 4 oder 5 Schichten…

Pobrania
7
Polubienia
2
Ocena
0
P
PrintablesSonC

Dustcover for Lashify Lash Pad round 80mm

My wife wanted a protective cover for her Lashify Lash Pad (round silicone pad 80mm) Meine Frau hat sich eine Schutzhülle für Ihr Lashify Lash Pad gewünscht (Rundes Silikonkissen 80mm) Printed in PLA, supports on (because of the thread)

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesJHB95

ESI XJAM dustcover

I am way to cheap to buy decksavers for my gear, and I own a 3D printer. I could not find a dust cover for the ESI xjam pad controller, so I made one myself.

Pobrania
2
Polubienia
1
Ocena
0
P
PrintablesLord_of_Shred

Network case / rack dustcover

I bought a cheap 6 HU 19" Rack Enclosure for Networkequipment that came without the brush dustcovers to help guide the cables through the top or bottom. I created this dustcover which can be printed on a >= 300mmx300mm printbed and can…

Pobrania
2
Polubienia
0
Ocena
0
P
Printablesprsfzk

Dustcover Metropolix solo

I printed it with 100% infill. Please enjoy and show me your prints!

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesVEXEK Sagl

Polaris 1 Bottom Dustcover Cap

If you have purchased a Baader Planetarium Variofinder 10x60 and upgraded it with a T2 Focusing eyepiece clamp you probably need to store your Polaris 1 guiding eyepiece safely, as this eyepiece does not come with a bottom cover cap we…

Pobrania
0
Polubienia
0
Ocena
0
P
PrintablesOlaf

Dustcover for Venta LW74 or LW73 transparent settings available

Ein Staubschutzdeckel für den Venta Luftwäscher LW74 oder LW73. Wer transparentes PLA verwenden möchte kann das 3mf File mit passenden Voreinstellungen verwenden, die Druckzeit steigt dann aber das Ergebnis ist viel besser. Die Fotos…

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

Network case / rack dustcover

I bought a cheap 6 HU 19" Rack Enclosure for Networkequipment that came without the brush dustcovers to help guide the cables through the top or bottom. I created this dustcover which can be printed on a >= 300mmx300mm printbed and can…

P
Printables

Dustcover for Exquis

Option A Print 2 x half covers and the belt. glue it together. or use soldering iron to melt it together using filament - with or without belt. Option B Print the EXQUIS - FullCover.stl on a larger printer than mine. Modeled over a 3D…

P
Printables

Bambulab A1 dustcover XY printbed buildplate protection

Created this cover for my printbed so it stays clean during production pauses or for longer breaks, where visitors might touch the plate. Just home the printer, slide the cover on, finished! So easy :) Its printable on the Bambulab A1,…

P
Printables

Bambulab A1 dustcover X-Axis protection

Created this cover for my X-Axis so it stays clean during production pauses or for longer breaks, where visitors might touch the printer. Just home the printer, slide the covers on, finished! So easy :) Its printable on the Bambulab A1,…

P
Printables

Bambulab A1 dustcover Y-Axis protection

Created this cover for my Y-Axis so it stays clean during production pauses or for longer breaks, where visitors might touch the printer. Just home the printer, slide the covers on, finished! So easy :) The covers are formed to slot in…

P
Printables

Bambulab A1 dustcover Z-Axis protection

Created this cover for my Z-Axis so it stays clean during production pauses or for longer breaks, where visitors might touch the printer. Just home the printer, slide the covers on, finished! So easy :) The clips on top are needed, so the…