279 modeli
Common parts minecraft_torch_lamp_body minecraft_torch_lamp_diffuser e27_collet Wall mount parts minecraft_torch_lamp_wall_base minecraft_torch_lamp_wall_hook Desk / Table base parts minecraft_torch_lamp_desk_base Printing tips I suggest…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The model just fits on a Prusa MINI+. I used a 0.6 mm nozzle, 0.3 mm layer height and 10% rectilinear infill. But 0.4 nozzle and different settings should work as well of course. It just takes longer ;)
Wydruk około 4,51 €–5,52 € nettoWstępna wycena jednego wariantu
Adapter plate that can be used with the E27 bulb socket holder from Clas Ohlson: https://www.clasohlson.com/no/Pæresokkel/p/32-3842 Dimensions of plate is approx 58 x 88 mm. Diameter 40 mm and screw holes 4 mm.
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Threaded Cable Grommet for the E27 fitting Appropriate for round or flat flexible cables, configured by default for European E27 fittings with a M10x1 thread. The default stl exports will fit a generic flat 2x0.75 mm2 cable. You can…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Novostella E27 Smart LED Bulb (GD-BW09), Lampenschirm / Lampshade
Wydruk około 1,63 €–2,00 € nettoWstępna wycena jednego wariantu
Il y a 2 fonds différents : un pour cable encastré un pour cable externe --------------------------------------------------------------- There are 2 different backgrounds: one for flush-mounted cable one for external cable
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
Wydruk około 4,07 €–4,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Work in Progress. . .
Wydruk około 6,60 €–8,06 € nettoWstępna wycena jednego wariantu
I have lost this part for my lamp so I made one. Inner thread diameter is 40mm. Tested in PETG.
Needed a replacement nut for our lampshade, so I made one. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 20% Filament: Prusament PETG Signal White
A functional lampshade with a voronoi like pattern for E27 lamp sockets that have outer threads (like the IKEA Hemma cord set). Video tutorial: https://www.youtube.com/watch?v=6cxxnytzxkY I have also included a model that can be used as a…
Douille complète en fichier STEP pour utiliser lors d'un design afin de calculer si les dimensions sont exactes et positionner son ampoule correctement. Je ne trouvais pas ce genre d'objet en step ou F3d donc je l'ai fait pour fabriquer…
E26/E27 bulb sockets cost $3 to buy, this costs 0.30 cents to print! That's 90% savings to help justify your 3D printer purchase. I found Salvatore's 3D model fit the threads of light bulbs very well, however I wanted a more traditional…
E27 LED Lamp Kit A modular lamp designed around a cheap E27 renovation socket. This kit features a single base model paired with three interchangeable lampshade options. The shades in the photos are printed with Bambu PLA Basic Beige.…
A parametric FreeCAD model is included.
This is a working wall lamp holder for E27 socket bulb. Do not use with a voltage higher than 24 volts. Print instructions No need support
The lamp shade is held in place merely by the bulb itself. It fits on E27 “retro” LED bulbs and cheap sockets from DIY stores. Only use LED bulbs, incandecense bulbs become too hot! Printed using Prusament Galaxy Black PLA on a Prusa…
Beautiful Lampshade for Ceiling Lamp Size 247mm x 172mm with E27 base. Optimized with E27 Base and stretched a little bit for best quality in vasemode. Print Suggestion: Vasemode with 0,2 layer height 6 bottom layers / 1,2 mm bottom…
These models are remixed from Frank Dreschner's “Designer Lithophane Moon Lamp” [1], and raTmoles' lithophane solar system [2]. I extracted the bajonet adapter from Dreschner's original model and fitted it to the respective 3D model.…
small ring that fits perfect.
I have several spare sockets, but unfortunately they are mostly without any rings that screw onto the socket. I have identified two types of threading that slightly differs. One has an outer diameter of 40.2 mm and a pitch of 2.4 mm. The…
Death Star lamp for E27 lamp socket. Both models need supports.
I have remixed this beautiful lamp to have a larger hole (D=41mm) for standard E27 mounts and have also added 25mm to the height to allow space for even the largest E27 bulbs. The lithopane size needs to be adjusted to 115x90mm (height x…
Here in the Czech Republic, slightly different components are available than those used by the author of the original model. So I modified the original model a bit to finish this great lamp. 1x Emos power cord…
Simple lamp shade for E27 bulb to use with Apia lamp holder from Leroy Merlin. Holder hole is 40mm. Print in vase mode (I used a 0.6mm nozzle) UPDATE: Better use “thin walls” in your slicer and should printer fine.
Modular Customizable Lamp for 1000 logos E27 (Batman, Star Wars and other stuff) A lamp in which you can change the logo, insert the company logo, your favorite superhero badge or any other graphics from the game. It is enough to add or…
This lamp shell is made for LED lamps like Philips Hue that typically works well with frosted glass lamps. It's a work in progress as I would like to make a more stable mount for the lamp socket but as a test it works well. The filament…
Deadt star lamp - full holder for e27 bulb
firts one i printed with 0.4 nozzle and spiral mode, but is was very fragile. second attempt 0.6 nozzle this one came out nicly for the hole in the base switch off the: remove al holes, in the menu mesh fixes (if you wan a vase, don't do…
A ring for E27 bulbs. I could not find any appropriate one so I made it :) Work very well. Can be printed with PLA. I would recommend 0.15 or lower layer height, to make sure the thread will work.
You can print this without using supports and using 20% fill. It provides the same stiffness as a purchased adaptor and should pop straight into the lamp shade once printed. Note : (nothing to do with the print). When fitting the light…
Lamp base for Moon Lithophane. Link to moon Lithophane: https://www.printables.com/model/23859-designer-lithophane-moon-
My first project after getting into Fusion 360. It's a wavy lamp with thick walls so the lamp itself is very sturdy. Hope you enjoy it! PS: Fuzzy Skin makes wonders on this one!
Lamp plugs for E14 and E27 sockets.
This is just a simple replacement nut for E27 lamp sockets. The lamp sockets are usually supplied with only one nut, although sometimes two are required for installation. With this file you can print another nut whenever you need it.…
This is a cord grip designed for an E27 socket, available in two sizes: Small : Suitable for cables with roughly 4–5 mm diameter. Medium : Suitable for cables with roughly 5–6 mm diameter. The cap is compatible with both sizes. I printed…
This lampshade friction fits the E27 Hue Ambiance lights. Put the light through the shade and screw it in the socket. Print as vase mode without bottom layers. I used 0.6 mm nozzle f3d file included so you can modify the lampshade or…
can be used on all E27 sockets. Don't worry about different socket mounting sizes. Ensure to use LED bulbs because normale ones will get HOT!!!! Prints very fast - about two hour on my printer. Uses only one perimeter. I printed in PETG…
Simple stand for light bulb. It is designed for an e27 socket / bulbholder with 40mm in outer diameter.
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License ---…
Customized base for E27 socket and scaled to 150%
A modern 3D printed table lamp featuring an organic, twisted aesthetic—perfect for ambient lighting and stylish spaces. The lamp consists of two parts: a snap-fit base with a socket for E27 bulbs (⌀40 mm) and a translucent shade that…
1.- Introduction: In the garden I have a light chain (Light bulbs Guirlanda). In the far past, the bulbs were regular Incandescent light bulbs which were waterproof sailed. In these days, they were replaced by regular led bulbs which are…
this adapter is used to reduce the size of attachment for lampshades and make sure that a lampshade with a large attachment can be mounted on a lumen with a small attachment Category: Parts
I designed this lamp shade to fit a standard E27 bulb. The shade mounts using the regular E27 locking nut found with commonly used E27 map fixtures. The hole for mounting is 41mm big, but can be resized using the .3mf file. I've created…
Material: PLA Druckereinstellung: Layerhöhe 0,2 mm / Infill 10 % / Support No Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be happy about a like.
This holder is made for this Tower Lamp (https://www.printables.com/model/462548-tower-lamp)
A base for a Lithophane Lamp for Bulb socket with a thread. In future i will be going to make a E14 thread socket
Hanging lampshade for socket E27, for hanging in windows, for example. Diameter 15cm Height 13.5cm Fits E27 Including Lamp Ring for E27 Socket. Should be printed with 3-4 layers at the bottom and then Vase mode. Was a beautiful result…
This is a VESA E27 lamp holder designed for 3D printing. It is made of PLA plastic and is compatible with any VESA 75 / 100 mounting plate. The holder is designed to hold a standard E27 light bulb the hole for the lamp is 40,5mm and can…
This is intended to prevent fingers from entering a bulb socket where you didn't put a light bulb. Easily screw in/out using a coin or a screwdriver. Why you don't just put a light bulb in there is up to you, but now you can put this…
Additional parts to this design: https://www.thingiverse.com/thing:4739055 E27 remixed from existing parts. Have fun!
This model was designed for purpose of holding E27 socket and litophane lamp shade, some special things are necessary.
Simple custom base for a generic E27 Socket with a small E27 lamp and power cord.
Mit dieser Schutzkappe können die Fassungen von ILLU-Lichterketten mit Dichtung verschlossen werden, wenn kein Leuchtmittel eingeschraubt ist. So kommt keine Feuchtigkeit und kein Schmutz in die Fassung.
Eine Lampe zum anschrauben. Der Druck kann ohne Support erfolgen. Teileliste: 1 x Fassung E27 Gewindemantel und Aufsteckkappe M10x1 + 2x Schraubring Kunststoff 1 x Stromkabel mit Schalter 1 x M4 Mutter 1 x M4 8.8 16mm Schraube 4 x…
Table lamp with stackable lampshade. No screws or glue are used. The lamp needs an E27 socket. I used this one: Bioledex E27
This is a nut for lamp bulb E27
This Lamp consists of 3 parts: Lamp Base printed in reflective color (I used silver, white should work fine too) Lamp Shade its printed in vase mode to get rid of the seams printed with 0.6 nozzle for increased thickness print in any…
🟢 E27 Lamp Base – 85mm Minimalist cylindrical base for E27 lamp sockets. Perfect for custom desk or decorative lamps. Specs: ⌀ 85mm outer diameter 📏 45 mm height 🔘 Top hole fits E27 socket 🔌 8mm side hole for cable Print-friendly design:…
smaller then original + E27 thread Zmenšený oproti originální verzi a přidán závit E27
Lampring for lampsocket E27 Diameter 5.5cm Height 11mm Fits E27 Printed with out supports. 2-3 perimeters 15% infill is good enough Was a beautiful result when it was printed in PLA Wood. The threads have a good fit and have been tested…
Additional material needed: E27 socket 4x iron threaded rod M10, L=60mm (as weights in stand) 2x screw 3,9x16mm flexo cord with switch
I wanted a pink light fixture, now i have one.
A Lithophane moon stand designed for Phillips Hue E27 socket.
This is a modern spiral-style E27 lamp shade featuring a soft rounded profile, perfect for cozy home lighting or ambient setups. The design is clean and minimalist, with snap-fit compatibility to a decorative stand or base (like the…
My first attempt at creating a nice looking lamp in Fusion 360.
Mounting Nut with a single loop thread for easy fitting on Euro style E27 lamp sockets. Best printed in ABS or PETG. 0.15mm layer height
Give your space a sleek, modern, and industrial vibe with this minimalist cube lamp! 🖤✨ Perfect for desks, nightstands, or shelves, this design adds a unique touch to any room. 🔹 Designed for an E27 socket (55mm diameter) – The hole for…
Description I designed my own lamp for my balcony that is easy to print, assemble, and maintain. The construction uses PLA+ 2.0, PETG, and TPU 95A depending on the part and its purpose. Bambulab .3mf Files vor Bambu Studio with print…
Made a slimmer version of the E27 nut so that i can fit it in my Moonlamp .
This holder is for very common lamp shads. It allows better mounting of lampshades on lamp bases with no shade ring. Fits on E27 lamp holder with 40cm diameter. There are two versions: ring holder with clamp – secures the holder on the…
Nothing fancy just a shade. Print in Vase-Mode
This is base for table lamp Use Lamp Holder E27 Use gel glue for down cover
Die Bohrungen sind für M3 Schmelzmuttern konzipiert. Die Lampe lässt sich auch über die Bodenplatte an die Wand montieren.
A simple lampshade made for the Ikea Holmö or any E27 lamp base. The base can be printed in a darker color for contrast. The main lamp shade needs to be printed in vase mode. Print the lampshade in a natural/translucent/white filament,…
The Chandelier is based on the socket Ikea HEMMA E27. Instructions: 1) Print the parts (8 pieces) from PETG, ABS 2) Glue parts together with all purpose adhesive or cyanoacrylate (see Image) 3) Install socket Ikea Hemma E27 4) Install the…
Add a touch of modern elegance to your space with this easy-to-print Ribbed Table Lamp! This design features a stylish, minimalist aesthetic perfect for desks, nightstands, or side tables, and is designed specifically to accommodate a…
He hecho estas piezas para usar con las lamparas que tengais por casa Print Settings Printer: Delta Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: fervi vertigo pla vertigo Category: Sculptures
I designed it to fit the Ikea Molnart bulb in a HÅRSLINGA lamp stand, should fit other 125mm (GU125) bulbs as well. Gets hold in place by the bulb itself. Print settings I used 1.2mm Line Width (0.8mm Nozzle, with 0.4 you can go up to 0.8…
Lampe d'intérieur avec culot E27 Entièrement démontable
This is a remix combining Biebeer's E27 dummy with my GU5.3 lamp socket: https://www.thingiverse.com/thing:1307963 https://www.thingiverse.com/thing:4746306 OpenSCAD file included for your adjustments. . This combination makes sense if…
FritzPeppone has a number of excellent bases for his vast array of globe lithoplanes. I really like the elegant so-called “legacy base” design that Frank Deschner created. Fritz included a threaded legacy base for E14 sockets (and I…
This is a diffuser that can be used to evenly distribute the light from Philips Hue E27 LED bulbs. Other light sources may also fit inside. I originally made the diffuser for a triangular lampshade , but it also works as a stand-alone…
Designed this holder for common E27 bulb holder that can be bought in hardware stores. Usefull for projects like lamps, litophanes, etc. Note: You have to know what you are doing and in some countries have to have authorization to work…
Update element for Mech Arm LED lamp . E27 LED lamp only. Original model https://www.printables.com/model/1185972-mech-arm-led-lamp
lego e27 light bulb socket
No more hanging bulbs! This is a support for light bulbs that are hang from the ceiling. Nothing special or a trendy thing...just a simply support to fix some annoying light bulbs's hanging wires. You need only some glue to attack it on…
2019/16/02 new hat E27 V2 h20cm only for led bulb seulement pour lampe led for E27 bulb and E14 height 28 cm hauteur 28 cm shade E27 compatible with: https://www.thingiverse.com/thing:3206728 abat jour E27 compatible avec :…
Adjustable E27 ceramic bulb holder. The dimensions of the ceramic holder are in the pictures. Both ball joints are reinforced with a bolt inside. The ball has 20mm of diameter. Supports are only required for the nut hexagon recess (as the…
This durable plastic mount is designed to securely hold a standard E27 ceramic light socket in place. It provides a stable base for mounting lighting fixtures on walls, panels, or other flat surfaces, while allowing easy installation and…
A very easy to print lampshade. It should fit all E27 bulbs, very easy to assamble, just remove the E27 bulb and install the shade between the socket and the buulb. Print settings 3 or more walls no supports 0.2 mm layer height wall…
Meinen Schirm habe ich mit Fuzzy Skin gedruckt, so finde ich es noch schöner. Du brauchst zu dem noch zwei Schrauben M3 Gewinde zum Klemmen. Die anderen Informationen kann an den Bildern sehen. Wenn du einen anderen Durchmesser oder…
An E27 blind plug to make empty sockets safe to touch. Knurled handle for perfect grip. It might fit E26 as well, or it could be a tiny bit too big since E26 is a tiny bit smaller. I have no way to test that though. I used PETG, 0.16mm…
Skateboard trucks which fit e27 lightbulbs
Lampshade with 42mm hole to mount on standard (At least in closest shop =) lamp holders. Slightly squared to the bottom (Or top if looking at how it is printed) Use STEP file, STL included only for preview. Print in Vase Mode, 5 bottom…
