Liczymy pasujące modele…
A collection of 34 snowflakes with hanging loops for decoration purposes, a bit thick ones. They are all around 5 cm big. More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake…
A collection of 25 small snowflakes for decoration purposes. A version without hooks is here Mini snowflake collection More smaller designs ↑ Link: 30 Small snowflake collection Slightly bigger, 5 cm, designs ↑ Link: 34 Snowflake…
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
A collection of 34 snowflakes for decoration purposes, a bit thin ones. They are all around 5 cm big. They are also the same snowflakes without hanging loops here . More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34…
A collection of 34 snowflakes with hanging loops for decoration purposes, with a silhouette design. The same snowflakes without hanging loops are here . More 5 cm designs ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake collection ↑…
A collection of 34 snowflakes with hanging loops for decoration purposes, a bit thick ones. They are all around 5 cm big. More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake…
I had trouble with my previous Stop Block having too much deflection, and my measurements were inaccurate. I also needed a little more reach because of the Incra track so I modeled this Stop Block. I included an insert for Rockler T Track…
🇬🇧 – English – A collection of 23 snowflakes with hanging loops for decoration purposes, 7-9 centimeters big. The same snowflakes with hanging loops are here . 🇨🇿 – Czech – Sněhová vločka 23x jinak s očky na zavěšení, 7-9 centimetrů…
🇬🇧 – English – A collection of 34 snowflakes for decoration purposes, a bit thin ones. They are all around 5 cm big. A thicker snowflakes of the same size are here . Smaller models, around 2.5 cm in size, are here . And here with hanging…
A collection of 30 small snowflakes for decoration purposes. They are all between 3 and 4.5 cm big. More smaller designs ↑ Link: 25 Mini snowflake collection Slightly bigger, 5 cm, designs ↑ Link: 34 Snowflake silhouette collection ↑…
🇬🇧 – English – A collection of 25 small snowflakes for decoration purposes. A version with hanging loops is here . Bigger models, around 5 cm, are here and here . 🇨🇿 – Czech – Sněhová vločka 25x jinak. Verze s háčky na zavešení zde .…
🇬🇧 – English – A collection of 34 snowflakes for decoration purposes, a bit thick ones. They are all around 5 cm big. Thinner snowflakes of the same size are here . Smaller models, around 2.5 cm in size, are here . And here with hanging…
Slicer: PrusaSlicer 2.5 Nozzle: 0,4mm First layer height: 0,2mm Layer height: 0,16mm Infill densitiy: 10% Fill pattern: Adaptiv Cubic Generate Support material Alle exakten Slicer Einstellungen sind im .3mf File eingebettet Druckzeit etwa…
Malcolm Reynolds Pistol - Firefly
🇬🇧 – English – A collection of 34 snowflakes for decoration purposes, with a silhouette design. The same snowflakes with hanging loops are here . 🇨🇿 – Czech – Sněhová vločka 34x jinak stylem “obrysová”. Stejné sněhové vločky s očkama na…
Discretely protect your bike from getting stolen. There are 3 total parts to this print (the bottom, the top, and the connector) and all you need are 3 screws to put it together (M3 12s will work). The bottom part is printed in Hatchbox…
Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…
The Ninebot max G2 is a great kick scooter and already has good indicator lights built into the steering bar ends. The downside is that those indicators are hardly visible from behind because the driver blocks them from view. Since the…
Dieses Dekoset besteht aus insgesamt vier unterschiedlichen Modellen : drei verschiedene Schneeflocken-Designs sowie ein runder Aufhänger . Alle Modelle besitzen eine integrierte Öse zum einfachen Aufhängen. Die filigranen Schneeflocken…
This is a clone of a original MSA Firefly II deadman key
Firefly logo contoured keyring with raised logo. Simple keyring that can be printed in single or multiple colours. Keyring is approx 2mm thick with a 1mm extruded logo making it light, sturdy and quick to print with minimal filament. For…
My bike couldn't fit a SmartTag 2 device, because the frame blocked the signal, so I had to make a box to hide it on the outside of the frame. I figured the backside of the rear reflector could be a great place to hide it, by making it…
Tumblefluff's Top-Rail Tool-Holder. Holding all your Tools, and Shedding Some Light on your Workspace Updated 12/11/2023 (added a combination of chamfers and fillets to the feeler gauge slot) Storage Slots for: All the Tools that come…
A design born of necessity. The floor vent in my bathroom is right in front of the toilet against the wall. In summer, the AC freezes my feet, in winter the heat from the furnace directly below scorches my toes. Enter the HVAC deflector…
Version 2 – Lens Cap for TLR (Bayonet 1) with Mounted Filter With this design you can keep your filter on and simply place the lens cap over it to protect your TLR lens. Compatible with TLR Bayonet 1 (Aires Reflex, Rolleicord, Rolleiflex…
I created this mount to add a bicycle reflector (that I already had on hand) to the rear mudguard of my Xiaomi Mijia M365 electric scooter. The reason for this was a combination of (my understanding of) local vehicle regulations, and…
Firefly logo fob style keyring with raised logo. Simple keyring that can be printed in single or multiple colours. Keyring is approx 2mm thick with a 1mm extruded logo making it light, sturdy and quick to print with minimal filament. For…
Sorridi, Smile, Cheese, Whiskey ... there are so many ways to ask people to smile, why not do it in a more spontaneous and unpredictable way? These simple little gadgets fit into the slot where the flash would go. Download the kind of…
I don't like how this turned out. I was going for 30° of deflection, but 15° was all I got. So go instead with my 80- or 90-degree deflectors, which work beautifully. Instructions Print without infill, without solid top layers, and…
A not-quite-right-angle elbow to deflect the stream of sweet-smelling vapor coming out of my diffuser.
Ein variabel zu befestigender Griff, um lange Tage mit der Legeflinte angenehmer zu machen! Sehr stabil entworfen, es werden zum verbinden von Griff und Schale noch vier M6 x 35mm Sechskant Schrauben benötigt. Zum drucken die Schale auf…
Just in time for the Christmas season, version 3 of the popular Christmas tree is now available. The "branches" of this Christmas tree are made of snowflakes. There are 15 layers of snowflakes of different sizes that are joined together.…
A collection of 23 snowflakes with hanging loops for decoration purposes, 7-9 centimeters big. The same snowflakes without hanging loops are here . More big designs ↑ Link: 26 Big Snowflakes collection Smaller, 5 cm, designs ↑ Link: 34…
Serenity - Firefly Class From the tv series Firefly.
Anycubic Kobra X filament deflector and waste bin. The filament deflector mounts directly to the back of the filament extractor and is secured with screws. The filament waste bin is designed to fit snugly next to the Kobra X. It sits…
Gave that away as a birthday present to 7-year old twins....therefore I needed a sturdier version that could take some abuse. I basically combined chemteacher628 awesome BattleFleet version with yanew's parametric toolbox design and added…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I designed the "Complete Purge System" in two versions for Bambu Lab A1 Series printers. The first…
A collection of 26 snowflakes with hanging loops for decoration purposes, all about 9 centimeters big. More big designs ↑ Link: big 23 Snowflakes Smaller, 5 cm, designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake…
Print each half to lie on its end so that no supports are required. When printed slide both halves together and adjust size. Side and back lips go under vent register so no magnets are required.
AirTag Bike Mount / Reflector Apple AirTag is a fantastic little device, and I wanted to be able to use one to track my bike in case of loss or theft. There are expensive accessories out there, but I wanted an inconspicuous, stylish, and…
Description This upload contains several CAD models of electrical switch components compatible with Busch-Jaeger Reflex SI . All parts were independently modeled based on real measurements of existing components. They are not original…
This is a remix of ShapeLabs's track saw hose deflector design, which was then updated by Mak-E-Verse and made compatible for Makita tracks/rail guides. Both original designs are based off of the Festool FS-AW available for their rail…
Update: 2025-05-15 I've removed the bambu exclusive restriction and have set the license to allow remixes. Have seen a few other variants out there, but wanted something that was a little more minimalist as I have no need of silca bag…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
I was looking for a solution that prevents the suction hose and the cable getting caught on the end of the guide rail when sawing with my Festool TS55 saw. I printed first the excellent model…
change the color of the filament at 5 mm to accentuate the snowflake inlay. check out my other christmas designs: SNOWFLAKE ORNAMENTS MERRY CHRISTMAS FRÖHLICHE WEIHNACHTEN COLLECTION GNOME ORNAMENTS 2 GNOME DEER
This fan duct will redirect air flow from 120mm/140mm fan at an angle. For example this can be used On the back of your PC to the VRM area on your motherboard. This is required when you're using water cooling, which could reduce cooling…
A simple printhead case replacement for Anycubic Vyper. Main goal was to allow makers to “see” easily when the small strain gauge led is lit (to avoid print head crash into bed). Then I replaced stock air deflectors with wider ones that…
So there are a number of paid models out there for this, but I figured I could whip up a free design that will hold both your ears and backpacks or purses. It mounts to the wall with some #4 screws or 3mm if you have them. You can use it…
The Snapmaker U1 has a bad habit of throwing its poop over the edge of the bucket. This deflector connects to the nozzle wipers and creates a barrier to help guide the waste filament into the bucket. Features: Can be printed without…
This was a Human Rogue that I added a tail and horns to make it a Tiefling. Downloaded from: https://www.myminifactory.com/object/3d-print-human-rogue-200947
This poop deflector is a simple, lightweight accessory that slides onto the right side of the X linear rail of the Anycubic Kobra 3 Max. Its role is to redirect purge blobs and filament ooze away from the motion system and bed, guiding…
A collection of 34 snowflakes with hanging loops for decoration purposes, a bit thick ones. They are all around 5 cm big. More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake…
These can be printed with some support to end up with a crisp overhang and a clean print. These are hung with a command strip and should support the weight of ears and an empty bag. To ensure good bed adhesion you can certainly add a…
Print with 0.16 mm layer height , no support An extra plate can be printed from PETG or TPU and clamped into the deflector. This prevents the purge from sticking to the deflector. If the plate does not lift, simply glue it in place. The…
I was looking for some cool waste box for my A1, but haven't found version that both looked cool and was compatible with extra supports needed when you use AMS on the top and used deflector instead of huge wall. Hence designed this little…
parts required 2 x M3 socket screws (15 to 35mm long) 2 x M3 washers OnGlass Mk3 is a compact articulated lens hood, designed to block out reflections when taking pictures through glass. It also allow the camera lens to be tilted up to…
-Two colors -organic support -0.15 layer height
A tiefling female with a blade. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The tieffling…
If you read this, please leave a ❤! While using my original design I noticed it was difficult to grab onto the build plate with one hand. The caddy was in the way! I've mirrored the design so it mounts on the back of the plate instead of…
This is one of the first accessories I designed for my S1 Pro. If you own one you probably know what this is for. I've been using this for a year and I have none of the typical cable insulation damage nor have I ever grabbed the y-axis…
similar deflectors are available for sale but not in my country and for a (in my opinion) much to high price so i made some myself. Haven't tested them yet, this is the first prototype. I already found things to change so be warned: this…
UPDATE: V2 Da die vorherige erste Version nach Benutzung und anschließender Fahrt mit dem Wohnwagen immer wieder herausfiel oder sich sehr leicht lösen ließ, habe ich mich dazu entschlossen das Teil so zu modifizieren, dass es nun in die…
Last of Us - Firefly pendant
NEW Check out my new Battlestar Galactica expansion pack: http://www.thingiverse.com/thing:2187098 Settle the age-old question of which is better, Star Wars or Star Trek, with this battleship style game. This game is 100% 3D printed! I…
Some benefits: airflow is channelled away from the printed parts perfect fit and installation without tools low material usage and low weight
A heat shield designed to stop hot air in the Creality Space Pi X4 and X4L from blowing directly onto the filament spools while drying. I found DJR Engineering 's heat shield on Makerworld . It was too flimsy for me, though. So I designed…
The canopy is modified to be directly usable with the BetaFPV Meteor 75 Pro O4 hardware, i.e. the surfaces were flattened to account for the screw heads, and the antenna holder was altered to fit the fat O4 Lite antenna. Print in TPU or…
Scope Anti Reflection Devices. You could probably scale in the XY plane as needed to fit yours if these are not the right size. Measurements are based on the OD of the scope as these are meant to slip over the scope. Note: I tested this…
This is my Tiefling Female Bard with a Fidle. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 . If you like it and/or…
6 tieflings (3 male, 3 female) for your tabletop needs
This deflector prevents poop from being shot everywhere, and channels it downwards into the appropriate container.
Need to deflate your tires (tyres) for off road and are too cheap for a proper tool? Someone parked in front of your house blocking you in? Well I have the thing for you. Simple, easy . fast and super cheap. Fusion files included. Print a…
pieza de repuesto o extra para las guias de teflon del ACE pro o otros equipos que requieran acomodar 4 guias. recomiendo imprimir en petg traslucido, aunque cualquier material es de utilidad agregue un nuevo modelo con algunos ajustes
This is a magnetically attached vent deflector suitable for ceiling mounting, too. Magnets are 8x3 neodymium, this is the pack I bought (200 for $13.99) https://www.amazon.com/gp/product/B0CCXH6W5Q I used PETG since it will have hot air…
The Wobbly Weeblefly combines a spinning, rocking, and rolling egg shape with a butterfly that bounces along on a spring of sorts. The combination drives kitties wild! The egg's motion comes from a weight attached to the bottom of the…
Subwoofer port I designed for my cheap car subwoofer. Included is an .obj file so you can edit it to your own needs. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: Yes Resolution: 0.2625 Infill: 20%…
Thias is a more stable / durable Remix of Brad Bakers very useful original design: https://www.printables.com/model/1244644-kobra-3-max-poop-chutedeflector/files So this remix also needs a bit longer M3 screws. PETG is recomended instead…
Kobra 3 poop deflector without suports
Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes Resolution: 0.2 Infill: 60% Filament brand: Esun Filament color: white Filament material: PETG Slicer: Ultimaker Cura 5.2.1 Wall thickness 2.8 mm Top/bottom 2.8 mm Printing…
Air deflector for standard centralized ac vents. Use magnet of size 35x10x3 mm (LxBxW) 215mm for larger vents
This is a Tiefling Rogue I created on desktop hero then adjusted it with 3d builder.
Most flat panel TVs have the speakers on the bottom and the sound is directed downwards then in all directions. This deflector directs the sound towards the viewer increasing clarity. People like me that wear hearing aids this really…
smaller version of @mfetting 's poop director with an added grille
Simple model. Just slips over the purge ejector mounting piece.
A simple and useful muteflute Printed at 0.4mm nozzle and 0.2mm layer quality with eSun petg The gcode file is for an Ender 3 V2
Length : 188mm Width : 90mm Included is fusion360 file and STEP file, so you can edit it for your needs
A simple DIY collimation device for reflecting telescopes that can be constructed for about 1/10th the cost of commercial solutions. The main components are a USB Arduino Web Cam , a 42x0.75mm threaded extension tube and a 3D Printed…
This is the kobra 3 max poop chute/deflector. It might require a slightly longer m3 bolt than what is originally used
I used PLA filament for the model! Print: Nozzle 0.40 mm Layer height 0.2 mm Set the maximum print speed to 80 mm/s in the Prusa Slicer. Ich habe für das Modell PLA Filament verwendet! Druck: Düse 0,40 mm Schichthöhe 0,2 mm Im Prusa…
I remixed this to just have one screw right in the middle.
The "Firefly Symbol" keycap from "The Last of Us" brings back fond memories of this beloved video game and now TV series. This intricate design is perfect for fans who want to show their love for the game. To achieve the best results with…
Hier sind verschiedene Schneeflocken als Deko Alle mit 2mm dicke und ca 5 auf 5 cm aktuell 83 verschiedene
Hello folks, This is a floor register air deflector for standard 4"x10" floor registers. This is for use when a floor register/vent gets covered with a piece of furniture such as a couch. This diverter reduces the temperature…
This is a vase-mode (single-wall) print for a ceiling air vent. Just take some magnets and stick it to the vent. I have even printed this using LW-PLA to make it super light. Slicer Settings Wall Line Count: 1 Top Layers: 1 Bottom Layers:…
Kobra Fan Deflector On the Kobra there is a hole under the bed where the cable for the screen exits, and I noticed that when the printer is running there is a considerable draft from the MB fan exiting this hole. I had read somewhere that…
Simple deflector on motto guzzi tank (you have to mirror the other side) cc Daník ;)
I created a copy of the firefly faction logo that I plan to turn into a stencil. Feel free to use this logo to modify your other parts/components. Can be scaled to any size.
🖤 Modernes Wandregal – Versetzte Ablageflächen
This is a free model, provided by sraoill on cults3d.com. He has allowed me to share my fdm print profile on makerworld, as he is fully focussed on resin printing ( https://cults3d.com/en/users/sraoill/comments#comment-answer-518825 ).…
