Liczymy pasujące modele…
Recomended to print with PET-G, ABS or any car temperature resistant material. You will need to buy 50 mm wide velcro. To atach the velcro to 3d printed holder i used MAMUT glue (one-component adhesive with high adhesion) but i think you…
Small base for cheap Velcro straps that can be hotglued under the desk for neater cable management.
Model Description: This is a playable insert for the Welcome to board game. My goal with this design was a simple and clean storage solution as well as a usable tray to keep all the cards organized and easily readable during play. Simply…
The clip can be slotted into 2020 extrusion from the side, and then rotated to lock them in place. They can be quite stiff to get in, I used an adjustable wrench. I've included a 3mm hex wrench socket that may also work to turn them into…
Hexanogal multi-purpose can holder / sleeve that you can use to fasten regular cans with 66mm diameter to car boot / trunk or wherever you like. Just add velcro tape in the space reserved for it. No supports needed with 0.2 layer height.…
I wrote a python script to generate a piece of Gcode to add to the file to be printed. A number of settings can be changed to suit your own designs. the code is still being written to have better results but I put you a copy if you want…
UPDATE: WARNING: this part will probably break after a couple weeks if printed in plastic - learned that the hard way. Use this for temporary fixes, or if you can, print this in a strong material (metal if possible!) to ensure it lasts a…
Skadis Halter für Modelco.fr Schraubendreherset, anpassbar für andere Durchmesser. Als Haken wurden Standarthaken für das Skadispegboard verwendet. Skadis holder for Modelco.fr screwdriver set, adaptable for other diameters. Standard…
Netatmo Webcam Welcome and Health coach light support
I recommend 100% infill and as many perimeters as you want, as this is likely necessary to ensure it's strong enough for jobsites and gigs. I used 6 perimeters in PETG. Some ELCO Connectors have wing nuts, and this WILL NOT fit on those.…
10000 Downloads! Thanks to everyone who supported this project! I never thought I would reach this number! This is a Remix of Printable VELCRO by eried. I really liked his model, but the only way you can use it is by gluing the pieces,…
Those simple holders may be applied to your trunk floor using velcro. They will then keep things in place and ensure nothing is flying around in your trunk. The model is intended to be used with 2cm wide velcro. You should be able to get…
As the name in the Title might suggest, this is the Cabelcuff its a cable organizer/tidier to doing the same job, that a zip tie or a wire wrapped around your cable bundle would do, but quicker, reusable, 3d printed and with a really…
Overview I was amazed by the functionality of the fully 3D printed velcro entered into the recent velcro themed Printables competition: https://www.printables.com/contest/397-hook-loop-prints The winning entry by MM Printing felt…
Here we go again next project for the contest This velcro organizer is specially design to have the most necessary things always at hand. How many times you get in and get out the car? Tired of looking the most necessary things to take…
This is a wheelchair. It is miniature. It can be scaled to be larger. Category: Vehicles
Holder to fix velcro stripe or zip tie by screw or glue. usable for: velcro stripe / zip tie / cable tie width: 10 / 20 mm support: not needed (printed on side -> see picture) material: not defined (PETG/PLA used by me)…
This is a holder for a Philips Norelco shaver / groomer. It comes with a lot of attachments, but just a bag that holds them all, so you have to dig through and find the one you need. The larger guards & blade are across the back, with the…
v3: Added corrected brackets for mounting with velcro or command strips, if screw mounting to the wall is not an option. They should print properly now! Get your CPAP off your nightstand! Get it on the level of the mattress, too, if your…
Prusa CORE One Swing Arm Cable/PTFE Brackets instead of the inelegant Velcro fasteners. If you don't like the cable/PTFE management with Velcro fasteners on the swingarm, here is a more elegant solution using printable brackets (cable…
Update: I resized the item to be near a target of 50 mm for height and decimated the mesh to make it easier on the download.
Very old barrel in a wheelchair. Originally the barrel was supposed to be separate, the cart is part of another project, but the combination is very successful. Press the barrel and wheel rims separately and use the collar to prevent them…
If you have plenty of patches, flags etc but not enough velcro loop are to put them here is you answer: MOLLE compatible plates for your patches. Lite model for stitching a piece of velcro loop to and then attach the whole thing to your…
This is the first iteration (third internal) of my attempt to make printable Velcro. It is pretty nice to hang things, probably this small piece will resist much more than a kilogram of weight (hanging weight) and it is very easy to…
This handy little GoPro mount attaches your cam to a backpack strap or other object. I made it for backpacking and use it as my only mount out on the trail. It's great for live action shots from your chest strap. Strap it to a small…
When I saw the "Velcro" Contest here on Printables.com, I thought it was literally a challenge to see who could make the best 3D Printed Velcro! Well, after seeing that's NOT what everyone was doing, lol, I decided to try. Well, I am…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) I designed this travelcase, so i can securely take my trusty oneblade with me on vacation. works with magnets size: d6x3; d5x4; d5x3; d5x2;…
Introducing my latest creation: A 3D-printed Velcro strap buckle. Key features: You can remix & improve the model freely! All the files are orientated for convenient printing in STEP, STL & 3DM formats! No supports are required! Easy &…
Louise Belcher : Bob's Burgers – Keep your eyes peeled for Louise Belcher nightmare version. Done: Fine it here: https://www.printables.com/model/932971-nightmare-louise-belcher
Wise Magus Melchior Melchior (Mangus) , or Melichior , was purportedly one of the Biblical Magi (along with Caspar and Balthazar ) who visited the infant Jesus after he was born . Melchior was often referred to as the oldest member of the…
Modular interior door threshold ramp. Designed to print easily, be durable, simple to understand and expandable. -Prints without supports -Three walls & 15% infill is sufficient for strength due to the design. -Scale to any size / slope…
Zum fixieren des Ladekabels im Auto / For fixing the charging cable in the car
Hotwheel Display Garage A Garage Display where you can put your 1:64 model cars in and mount it on the wall. How to Assemble: Take the connection pieces and insert them into the holes of the Display Garage so that they stay together. How…
Print with the back of the model on the build plate. I used supports on the strip cavity only. I printed with natural ASA, but any material should be fine. I included the .step and .f3d files in case you want to modify the hook for…
A real 18" wheel inspired by VOLK TE-37. Scaled down to 1% to fit your keys. Just a funny little gadget for your carkeys. Print settings: Just print like regular PLA, with support for the center.
Post a make if you print this! :) Seeing our creations out in the wild is inspirational knowing it's helping other folks and encourages creators to put more out there. Needed a velcro anchor. Designed these and mount with 1/2" #6 wood…
A dwarf holding a sign that says "Welcome". The dwarf was scanned with a 3D scanner and is approximately 40cm high in the original. Ein Zwerg, welcher ein Schild mit der Aufschrift "Welcome" in den Händen hält. Der Zwerg wurde mit einem…
This is the V2 version of the first Pug Wheels. Now mostly 3d printed. The only things not printed are: the wheels that I bought at a local store the wheels axis that I cut from a 10mm aluminum tube The seat that has been cut from a…
30x30 mm mount for velcro cable ties (up to 16mm width), which can be either glued or screwed onto a surface.
Landscape mount for HSW environment. Two choices, one for standard single use command strips and one for use of velcro command strips . Thanks to Spatula for the inspiration.
Description: Declutter your workspace with my under-desk cable management solution! This 3D-printed accessory is designed to keep your cables organized and out of sight, providing you with a clean and organized work environment. Features:…
I designed this on the weekend for someone who has a disability centre. It turned out quite well so I am uploading it here. It is a bit hard to break out of the raft. You can't print it raftless. It can be printed in an Up Mini...just.…
This is a Coat Hook for Steelcase 3" cubicle walls. It is my first design that I am publishing. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: No Resolution: Fine Infill: 50% Notes: Flip the part…
This is a Collection of Cable Tie Holder and Velcro Strap For Screws or Double-Sided Adhesive Tape. Chamfer down and standing printing.
The Swivel Wheelchair Cup Holder provides a convenient place to place bottles and tumblers for wheelchair users. It's designed to be mounted to the wheelchair rails and best of all, it can be swiveled underneath the armrest when not in…
Hey guys, after tons of updates I would like to introduce you a printable alternative for hook & loop. Voilà! Easy to use - you just need to stick it on flat sides to whatever you need removable and hanging (I used a glue gun). Also, feel…
I wanted a case to store all the components and the power cord. Used TPU for the seal and the hinges, PLA or PETG work good for the hinges as well. (6) M3 x 20mm screws will be required.
Remix of smaller snap version of "Fishing Waste Line Collector" by sthone that does not use velcro and has improved fit.
This is something I did in Fusion 360 a few years ago during the 2020 shutdown. I originally printed this on my Airwolf Axiom machine and was never really happy with the print quality, but have been using it ever since and the…
This remix allows the use of cable ties and velcro straps with the honeycomb storage wall. Two directions are provided for each, to allow horizontal an vertical placements Best printed in PETg (PLA will also work) does not need any…
Same as the original, only the width of the case was adjusted to longer brushes
A remix of "Fishing Waste Line Collector" by sthone that does not use velcro. Instead, thread the fishing line into the holes of the inner cylinder. Compatible with the original M3 screw version files. CHANGES Outer Cylinder: improve…
I broke one of my wiremanager from my desktop, so i took the caliper and created the model. Then i redesigned it for better printabiliy, with hight strength and a nice design. You have different angles of the shape, smallest and best…
A 3D printed clamp by AmptUp.org, that fits a standard Medline wheelchair and can also be clamped to most pipes for wheelchairs, strollers and walkers, vertically between 1/2in. to 1 1/4in. in diameter. It has a dovetail receptor for…
Print with 100% infill. If you need more relief to make finishing easier increase the Z height. Prints OK in filament, fantastic in resin.
Print using supports at about 60° also a brim on the inner and outer. I printed mine out a PETG with 3 parameters and 25% infill. I added an infill modifier for the bottom to the bottom of the palm plate to make it solid. Mark off the…
I advise you to cut the comb into two parts and print it separately, as in the image below: After printing, you can glue it instantly with super glue. I test it using ABS and PLA to print (just 2 walls, 4 top/bottom and 15% infill). Why…
Harry Potter-style sign. Preferably, print in black and gold, but in Bambu Studio, you can choose any colors you like. I’ve added two holes if you want to hang it with a string. It can be printed with 0.2mm layer, 2 walls, 10% infill,…
My big boy wanted a ramp to play with matchbox cars, but i felt the need to overengineer it.... With this design your Kiddo, can have a Travelset of cars with a garage and Ramp! All organized! Wheen you print the side panels, you can…
This bracket has been designed to use a 20mm wide velcro strap to hold cables in place. The internal shape ensures no supports are required when printing and makes it easy to slide the strap through the loops without any hassle. Bracket…
A great Wall Art of welcome word. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
Wheelchair model for HG Gundam kits. It was originally modified for the Zaku II, but should work for most standard sized HG kits. For HG kits rescale to 75%. For the wheelchair frame I would use at least 50% infill and 3 walls since the…
My Brother is a huge dodgers fan so when i saw this it was a no-brainer. However looking at the design of the original upload and my newfound skills in CAD I thought I could add to the realism of the design by adding the accordion style…
Remixed it with 2 and 3 ribs to have it firmer for heavy load, so I can use less of them. Print it with the holes on the plate (like the original one). Print settings Material: PETG (or any other material that can handle the load).…
A remix of my original design from years ago Holder / Organizer for a Philips Norelco 7000 series shaver / groomer. It comes with a lot of attachments, but just a bag that holds them all and it's frustrating to dig through and find the…
My mother needed a cup holder to attach to her wheel chair so she could holder her coffee mug while taking the dogs out. Or just cruising around the house. This is what I came up with, to attach to her armrest tubing, but could probably…
A great Wall Art of welcome word. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
I was annoyed that my Festool vacuum cleaner has no clip for the cable. So I designed this cable holder in Fusion360 and printed it on my MK3S+. I use PETG for it and 30% infill.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is upgrade part to replace the pins on SCX24 trucks with a flat plate that velcro or magnets can be attached to. This was inspired by the mounts the newer bronco model. There are multiple adjustment points to allow more flexibility…
A simplified model of the Welcome to New Vegas Sign from Fallout New Vegas.
Darf ich euch meinen minimaltischen, modernen Beutelclipp v2 vorstellen? Der Clipp ist wiederverwendbar und kann handelsübliche Tüten und Beutel verschließen, damit der Inhalt frisch und genießbar bleibt. Ich habe ihn in PLA gedruckt,…
I was really tired of having to sort through the included bag for specific guards, trimmer sizes, etc, so I designed a set of Gridfinity bins to simplify my life. As someone who has to shave their head frequently, this has definitely made…
Elk Fest (Elchfest) is a fun and portable dexterity game for two people: http://www.rozmiarek.info/games/reviews/ElkFest.html The game is out of print, so this is my attempt to model the pieces to their true sizes. For the game you'll…
This cupholder is intended to work with our wheelchair clamp found here: https://www.printables.com/model/877736-medline-and-universal-wheelchair-clamp-for-cuphold This cupholder has a dovetail insert that can easily be added to or…
Background: This projector has gone by many names over its long career. These include: “EL4000/01” “DP70” “Todd-AO Projector” “Universal 70/35” “Norelco AAII” They all refer to the same, legendary machines. With roughly 1500 produced from…
Sanding using this pad feels natural. With an almost flat hand resting on the curved surface you can sand without tightening your fingers. This allows you to effortlessly sand for hours without cramping your hand or fingers. The Velcro…
Welcome Home into your home! Recreate Wally's home from "Welcome Home" for your own home!
WELCOME TO THE PARTY PALS!" I designed this X-Mas Tree Topper in tribute to one of the GREATEST Christmas movies of all time! Yes, DIE HARD is a Christmas movie!!! It's a super easy project. and yes, there may be some Nakatomi Towers out…
STL files are prepared for printing on a 3D printer with a maximum print area size of 210x200. If the size of your table is larger, you can easily scale it according to your size. To make a large-sized version of metal, wood or plastic,…
Boss pedals have a rubber foot and information label that don't play nicely with adhesive velcro tape. This part allows you to easily mount to a pedalboard without any additional hardware. Remove the four Phillips screws from the bottom…
This organizer is designed to fix my biggest gripe with the Philips Norelco Multigroom 3000: there is no convenient way to organize the various guards and cutting heads included with the kit! If you own one as well, you likely know the…
This is the Custom Wheelcap for the G29 / G920 / G923. Customise it for your own use and put your own logo on it.
Občas se hodí variabilní upevnění kabelů. Třeba proto, aby se neváleli po zemi. Toto je klip pro ‘škrk’ pásek šíře max. 20 mm. Připevňuje se vrutem D3 nebo oboustrannou lepicí páskou šířky max. 20 mm. Vytištěno jest z PETG (není…
These devices fit onto any wheelchair or walker tubing that is ¾" in diameter. They snap into place with some force and do not come off easily. Use the screw to secure into place if required. Fits all phones smaller than Iphone 14 plus.…
Simple 2D wall art - Welcome Witches If necessary, you can set your own size. With a layer height of 0.2, you only need to respect the height of the Z axis (0.6 mm - 3 layers - only 0.4 mm - 2 layers is also possible). Feel free to change…
Gnomes* moved into our home and built a door, so we made them a door mat to ensure they feel welcome. This miniature welcome mat is sized (43mm x 72mm) to fit a standard doll house door. The solid version looks nice with a color change…
Case to perfectly store the Philips Norelco Multigroom Series 9000-21 - MG9510 and all accessories. The Cover must be printed with the top (Philips logo) faced down, I used supports only on the logo. Rods can be printed horizontally, but…
Englisch The Minions to hang/stick to the door with Welcome lettering and hole for peephole. Door viewer has an outer diameter of 26.85mm. Deutsch Die Minions zum an die Türe hängen/kleben mit Welcome Schriftzug und Loch für Türspion.…
Someone stole my centre wheelcaps of my car. So i made my own. There is a PDF in the files folder so you can see the measurements. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0.2 Filament: .…
Yesturday I helped a good friend to improve his Camper. Therefore I printed some Velcro holders to mount the Solar Panel & its Cable securely to a wall. The holders are for different widths of velcro and very strong. (I hang myself onto…
Would you kindly..... Update - 03/08/21 - There were two files titled ‘Red - Parts.' Although they same name are actually different files. Problem was when you downloaded them, one overwrote the other leaving you with just one of the…
PixelClock 32x8 NeoPixel LED matrix to be placed on a desk or on your wall. For BIG printers as 1 piece front and small printers in 2 front parts too! =) This project can be assembled without soldering. More on this below… Video: Music…
Please leave a ♥ Like if this print was helpful to you :-) A simple design that takes a 20mm velcro cable tie from either side and holds cables in place somewhat safely. Recommended to print with PLA. Print Settings Rafts: No Supports: No…
TESTED AND WORKING!!! NO SUPPORT REQUIRED :D (Tools needed: hair dryer with hot air+flat head screw driver) A design Im working on for a friends disabled guinea pig. has room for approx. 1" straps. Here are the wheels-…
Easy print exactly on Mk4 without support or anything else the wheels are just plug with Force like standard chair
A simple door or wall sign to welcome your guests. Designed to be thin and light and easily stuck on a wall. I printed it in PETG at 0.2 layer, 3 top, 3 bottom, with 10% aligned rectilinear infil. This makes it stiff and light, similar to…
platzsparender Clip für die parallele Führung von 2 Leitungen/Kabeln a 6mm² einfach zu öffnen und zu verschließen in einteiliger Ausführung. Kabeldurchmesser ca. 6mm Gedruckt in PETG, in PLA nicht getestet, könnte aber wegen der fehlenden…
![Kabelclip fürs Auto / Cable clip for car DASHCAM and SMARTPHONE [PETG and TPU Version]](https://media.printables.com/media/prints/552878/images/5759815_245953e8-271d-45d0-a252-8548549ca984_155cb0e4-9909-4e34-804f-34ab8d0ed35b/bearbeitet-1.jpg)
