229 modeli
This is a pendant design inspired by the logo of Elden Ring video game. It's made With Cinema 4d and exported as an .stl. The default size should be around 8cm (3 1/8 inches).
Schablone zum Zeichnen der Logos einiger Superhelden - Stencil for drawing the logos of some superheroes
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Key chains of the Elden Ring and the Great Runes.
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Alexander the Iron Fist (Pot boy) from Elden Ring. Base versions of the model and detailed models made via displacement. I printed these models with much success using SLA printing (Photon S). FDM printer may have trouble especially with…
UPDATE: Fixed the arms. A remix of a thingiverse file by AstralProxy - allowing for a fillable pot. https://www.thingiverse.com/thing:4892024
Be careful with orientation and supports. I got him to print pretty small.
Sculpt of a second-generation albinauric from Elden Ring, sculpted in ZBrush. Credits to Charro Zuck for the photography, printing, and pre-supporting, and the Elden Ring character design team for the design. If you like it, please check…
Model directly from the game. Can be cut up to make it easier to print
This is my first attemp in creating life-size weapon.
Ranni is the daughter of Radagon and Rennala. After Radagon departed and became the consort to Marika, Ranni and her siblings were raised to demigod status, as they were now the children of the consort of a goddess. She appears to have…
Model directly from the game. Can be cut up to make it easier to print
Have fun. i cutted the pieces again in halth and glued them together. it is still work in progress but looks good so far
Alexander the Iron Fist (Pot boy) from Elden Ring without arms or legs. Base versions of the model and detailed models made via displacement. I printed these models with much success using SLA printing (Photon S). The detailed models have…
Elden ring message stone with printed messages underneath. STLs included: -Message stones with blank base -Message stones -Elden Ring logo -"Time for Elden Ring" -"Could this be a dog?" -"Try fingers but hole" -"Dog ahead" -"Rump ahead…
Made this simple Black Knife model from elden ring. As always you may need to sand or glue the parts together to get them to fit together. Just use the exploded view for assembly. Should be about 17 in long. be sure to post a make and…
Eleonora's Poleblade from Elden Ring (Cosplay)
Update 12/12/2023 - Added the Raya Lucaria coaster & the Carian/Crystalian coaster. Update 12/5/2023 - Added the Cleanrot coaster. Update 11/29/2023 - Added the Two Fingers coaster. Update 11/16/2023 - Added the Ancient Erdtree, Omen…
will need aprox 76 inches of half inch rod. split for printing. blade is swappable with my guts raider sword model. Category: Props
The cracked pot from Elden ring. Essential vessel for crafting cracked pot items. The materials and magics sealed within deploy their effects when the pot is thrown. Fill it with anything from blood, poison, or just put a plant in there!…
see title. May need to split in 2 or more pieces to print on a normal sized printer
Printing the hat requires BRIM and supports. Nomal versin files has in-model supports for better quality with FDM printers. But supports in slicer are still needed. Resin printer users use DLP versions. All the 3D models of NemoMK2・Cults…
Arcane Sphere of Faces enemy from Elden Ring; hollow and solid. All reserved to From Software and Bandai Namco.
Model of the world map from Elden Ring. Broken up into parts and designed to fit on a build volume of 256x256x256. Also includes rough model of entire map. See reddit post for more details…
Model directly from the game. Can be cut up to make it easier to print
Giant Crusher from Elden Ring
Godfrey from Elden Ring in his casual outfit, not in boss form
impressão simples com leds Logo elden ring desenhado para usar leds , caso seja redimencionado nao alterar a altura de z devido ao faceplate. impressão tem de ser feira em processos. leds https://s.click.aliexpress.com/e/_98Vnlw…
1:1 original model extracted from the game
This was specially design to hold Belden's CAT6+ keystone . But will very likely work with other similar style keystone connectors. Nozzle = 0.4mm Layer = 0.3mm Perimeter = 3 Infill = Gyroid 15% Support = can be done without, but if…
I recommend saying “no” when your slicer asks you if you would like to update the model dimensions. Then, scale the model to 10,000x it's original size to get something reasonable that you can then scale how you would like. The modal can…
The Marias Executioners from Elden Ring. The sword is four and half feet long. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 10% Gyroid Filament: Inland PLA+…
"Sturdy greathelm made from iron. Though it is uncomfortably heavy and obstructs the vision of the wearer, it provides considerable damage negation." Though it may not be 100% accurate, I'm proud of this. The helmet halves fit a 220mm…
Godskin Peeler from Elden Ring
Hand of melania sword from elden ring. This one is scaled to be around 1m but i think the one in game might be as tall as she is so once i have finished my test print i will update the scale and the sliced parts accordingly Category: Props
World Tree Demon from Elden Ring with staff included as a separate stl
"A talisman engraved with a scene from a heroic tale. Raises strength. The mightiest hero of the demigods confronted the falling stars alone—and thus did he crush them, his conquest sealing the very fate of the stars." I converted an…
the The Bloodhounds Fang from Elden Ring, real life scale. Use supports, its a BIG print
Malenia, Blade of Miquella - Hueforge From one of my favourite games, please enjoy and share your makes :) Printing instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Kingroon…
This is my first Hueforge project, I found this fan art from Arles48 . I did not create this and found it on a public website. I left the watermark on it to clearly state that this is not my creation and is NOT for commercial use in any…
This is my second Hueforge project, I found this fan art from Sakimichan . I did not create this and found it on a public website. I left the watermark on it to clearly state that this is not my creation and is NOT for commercial use in…
Alive Pot NPC from Elden Ring. The generic creature npc that you see multiple of in game and can attack.
Castle Gargoyle from Elden Ring with Weapons (double-sided sword, battle axe, short sword, & short axe)
moonlight greatsword elden ring dark moon greatsword
I made a Elden Ring coaster with the logo on it for a friend of mine. Designed to be multi colored but can also be printed one color. I would recommend to scale it at about 110% for a 10cm diameter coaster. 30% infill for a nicer finish.…
Elden Ring - Marika with monster
Pot boy from Elden Ring. Depth is 60mm, opening is also 60mm Print Settings Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.28 Infill: 20 Filament brand: Marvle3D Filament color: Grey Filament material: PLA
I printed the mask in one piece (see pics) with the spikey bits on the bed, supported heavily (painted in the 3mf file) to keep it attached. The mask and band are attached with an M3 bolt and nut. Nut goes in the slot of the mask and bolt…
This hero dashboard for the original HEROQUEST game from the 1990s can carry a hero character card as well as 2x 15 treasure, equipment and/or spell cards. Another feature are the dice trays in front. Suitable for up to 16mm D6 dice which…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Orange…
Included 2 versions, 1 with storage, and 1 filled. The bell and bell tongue require a piece of string to be thread through. The pattern on the lid was achieved with hilbert curve bottom layer infill and 0.6mm wall thickness on bottom…
Hello fellow tarnished! A message has been scrawled on your fridge! Sized for 6x6x2mm magnets
Miquella's Cross Earrings Simple representation of the Miquella cross from Elden Ring adapt to hang as an earring. - Printing characteristic : Adapt the scale of the part to the desired size. Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3…
With this holder, you can hang your Xbox controller to any wall, wardrobe, etc. I've created such a hanger because I didn't find any nice hanger I can hang my controller. Also, I love Elden Ring Even tho my painting skills are really bad,…
Split in halves to be printable, superglue the together after print
Made this simple Elden Ring Throwing Dagger model. As always you may need to sand or glue the parts together to get them to fit together. Just use the exploded view for assembly. Should be about 12 in long. be sure to post a make and…
Elden Ring - Ranni the Witch
The Claymore from Elden ring in real life scale Use supports
aprox 55 inches, split for smaller printers, takes aprox 51.3 inches of 1/2 in dowel/rod for assembly/reinforcement. Category: Props
Raptor Talons from Elden Ring (Cosplay)
The Long Sword from Elden Ring in real life scale use supports
This is a replacement cap for Selden - Furlex 100S Genoa Furler Mine fell off and replacement part would take weeks to deliver... It works quite nice and has interesting texture due to the slope of the cap. Printed in PETG to avoid it…
This is my second Hueforge project, I found this fan art from Sakimichan . I did not create this and found it on a public website. I left the watermark on it to clearly state that this is not my creation and is NOT for commercial use in…
J'ai ajouté un socle qui faudra coller .
Bust of a Drake Knight, from Dark Souls 2. Comes pre-supported for resin printing but completely FDM printable. Photography and supports by the amazing Charro Zuck. Golden Armor of the Death Knights, whose own death masks served as the…
Ich mache gerade meine ersten Versuche im 3D modellieren und ich musste einfach meiner Liebe für Fromsoft Spiele Ausdruck verleihen. Um mich nicht maßlos zu überfordern habe ich einen Kühlschrank Magneten der Message Stones aus Elden Ring…
This is a re-upload of my original, kit-bashed model based on the first trailer for Elden Ring. You have the option of a solid model, or the hollow one with separate lid. It's not super stable but should be able to stand on its own.
A miniature sculpture of the "Spirit Jellyfish" from Elden Ring. Made for miniature wargaming tabletop games. --- This model is based off of its appearance in Elden Ring: Fits on 32mm wargaming base. I made these models myself - they are…
This part is to replace one side of the adjustable plastic clamp that holds the canopy at different angles. The flat adjusting turn knob on the bolt that goes through, can be loosened and tightened against this part to allow the canopy…
Bust of a Drake Knight, from Dark Souls 2. Comes pre-supported for resin printing but completely FDM printable. Photography and supports by the amazing Charro Zuck. Armor singed and blistered by fingers. Worn by Vyke, knight of the…
Made for a 16x16x2mm magnet
Model of the Nightlord done in nomad sculpt.
The top part doesn't need supports. Gluing is best as follows: put glue between top and bottom parts, put glue on the left and right parts, let the left and right parts hold the whole thing together
Simple Stamps with a simple design, easy and quick to print. I used PLA with a 0.4 nozzle for my print, some of the detail is lost and the result isn't perfect but I think it kind of fits with the theme of the game. If you want better…
Easy print, just print in monocolor and paint with any acrilic pen or brush. Optionale: ErdTree and Miquella cross
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
The model consists of 8 parts 3d printed, and one metal tube, I used a basic conduit tube you can find in home depo. The diameter of the tube is 18mm or 0.7 inch. The tube is 22.8 inches long. The sword itself is 35 inches long
AI generated hueforge filament painting of a Moon Knight inspired by the Elden Ring video game. Print settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at…
fits in 100% dummy 13 hand
0.12mm layer, 5 walls, 15% infill
Elden ring players, you might like this sign. Display in on the wall!
Selden boom mount I use this to secure my selden boom to the mast. This means always one side stays attached to the boat when deploying. A must if using these things at sea singlehanded. I use two with elastic bands. They holdup 95% of…
Bust of Sir Ansbach from Elden Ring. Comes pre-supported for resin printing but completely FDM printable. Photography and supports by the amazing Charro Zuck. Attire of Sir Ansbach. The embroidered crest of the Pureblood Knights has now…
An approximate model of the runes you drop on the ground after you die, and die, and die in elden ring. You might need to use the tip of a knife to widen the holes if the stalks don't go in. Don't force them as they are too thin. Better…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A striking fan art figurine of the Tarnished from Elden…
This should fit on a printer with a 230mm squared build plate or larger, but cut it up or scale it down if needed. I would recommend printing it as I orientated it because it would cut down on support material. Glue brown fabric around…
YOU DIED A keychain with the text that appears on screen when you die in Elden Ring, Demon's Souls, Bloodborne and Dark Souls, perfect for a fan of soulslike games. Design Highlights Reinforced Loop: Extra-thick attachment point to ensure…
This is a coin holder for the well known boardgame DICE HUNTERS OF THERION or in german WÜRFELHELDEN by Richard Garfield, the famous inventor of Magic the Gathering trading card game. Available with english and german title written on the…
Elden Ring christmas ornament for your christmas tree!! Category: Other
![[Elden Ring] Sword of Night and Flame](https://media.printables.com/media/prints/382817/images/3212591_3c3947cf-ee97-4011-a7de-25c247166cac/whatsapp-image-2023-01-28-at-204409.jpeg)
