184 modeli
Compliant mechanism clips and clamps for use or replacement in different projects. The clip will hold things like cables, pens, tools and many others you want to have attached. Changelog 2024-12-21 v1.6 fine tuned print settings for…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
reposoir en deux partie, support du flacon et cuvette interne libre pour récupérer le liquide en cas de fuite du flacon. 2 périmètres, 15 % de remplissage.
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stand to reposition the original LCD display to the top base. Reduces the printer footprint and modifies the angle so it's easier to view and operate. Uses original mounting points of the screen too. Screen holds in place respecting…
FT EMS (Electronics Management System) was designed to use pretty much any board that can physically fit a designs. The single mounts that have 3 vertical holes can be mounted vertically or horizontally. The boards that have a more than 1…
UPDATE 1: Pin improved for V1 - Try Pin V1. 2 FIXED if the nebula pad is to loose with Base V1 UPDATE 2: I built a new holder from scratch (Display Base V2 + Pin V2). In V2 I fixed the problems that were present with V1 such as the wrong…
The "Geos" are edgy, literally 😎 We've combined the sugary sweetness of the FDM5 top-end with an accurate and punchy mid-section and bottom end. If you're into critical listening, or even mixing and mastering, the FDMGeos are for you! The…
This is a light remix of the Honeycomb Stratocaster Body by Conceptor. ( https://www.thingiverse.com/thing:3174465 ) I resliced the body into 9 pieces rather than the original 6 so that there is only 1 seam under the strings where the…
Model printed in PLA and PETG in Creality Print on the standard "Normal" profile. Layer height 0.2, nozzle 0.4, filling 15%. Brim and support disabled. Pins should be printed separately, Brim and support optional, but not suggested, with…
This is a simple and good looking adapter to rotate orginal filament spool holder. For assembly you will need: 2x M5 nuts 2x M5x20 screws (flat head recommended) 2x M5x12 screws CA glue to fix the nut inside the hexagonal hole
Use this PIN with ' https://www.printables.com/model/592886-ender-3-v3-se-ender-3-se-lcd-reposition-stand ' for move stock LCD. The lock the screen with the new base.
Overview I've struggled with knee pain while sim racing on my Fanatec Clubsport V3 pedals due to the brake pedal placement. Some folks have successfully swapped the brake and clutch pedals to help with this, but I think this is a sub-par…
First, I needed to reposition the LCD on an Ender 3 V3 KE. The slots and posts are reversed from the SE (the slots on the KE are on the LCD) and I was unable to find an alternate LCD mount for the KE. TinkerCAD had a hard time with…
Caja portaobjetos para el reposabrazos central de Fiat Tipo 2018-
This is our 3rd speaker design to date. We went way off-script with this loudspeaker, hoping to attract those with smaller build volumes and a desire for deep bass and excellent off-axis response. They pack the party animal of the FDM5's…
Developed in the summer of 2023, these 3D printed bookshelf speakers are our first attempt at properly meshing 3D printing and audio. We believe that we hit the mark! FDM5 Loudspeakers throw out an impressively wide soundstage and boast a…
Salvadanaio "Deposito Zio Paperone" stampato in due pezzi (corpo centrale e cupola) senza supporti. Misura 15 cm x 15 cm x 24 cm cupola inclusa. Materiale: PLA L'ho stampato con: altezza layer: 0,2 mm. Perimetri: 2 Riempimento 15% (però…
Update: I forgot that the Ender 3 KE has a different spool stand, with an additional part that makes it incompatible with my model. As such, I've updated my model to support the KE stand. Please let me know if it's still incompatible, in…
Reduces the printer footprint and allows to move the printer closer to the wall on the right side.
This is a 3D printable cabinet for an 8" powered subwoofer by Deposition Sound LLC. If you have a medium/small living space that is in desperate need of thick, juicy, and fast bass, these are just for you! They have been carefully tuned…
⚠This is not my design, and I haven't tried making it yet myself.⚠ I just made a clearer overview of the model here in Printables. original creator's Thingiverse: https://www.thingiverse.com/liyue_cheng/designs assembly video:…
Cam reposition with swivel and tilt for fully custom POV. Takes 3x M3x 4.5mm OD x 5mm L heat set inserts and 4x M3x10ish screws (tbh didn't measure which ones I used) Credit to @Henryk for the swivel idea.
Ender 3 V3 SE LCD reposition stand variant. Reliable holder, verified installation location, does not interfere with calibration, is equidistant from the hot table and the edge of the case. I suggest you familiarize yourself with the rest…
THIS MODEL IS NOW DEPRECATED (I mean it still works great I just updated): https://www.printables.com/model/1089271-svo8-camera-reposition-adjustable Never understood why Sovol hung the camera upside down like that, the view was just…
This is built from scratch in fusion 360 but inspired from the model linked in the remix so it looks similar. The reason for remixing was to add a angled fixing hole top increase stability when mounted and to dimension this for wire which…
The original design is awesome & I love the way it looks & works, but some spools are wound too loose, so added a guide. Guide was borrowed from https://www.printables.com/model/115109-filament-guide designed by Matt Boyer, & fused…
Use this PIN with 'https://www.printables.com/model/592886-ender-3-v3-se-ender-3-se-lcd-reposition-stand' for move stock
As a researcher in computer graphics with access to a 3D printer, it should only be a matter of time before these classical models finds their way onto your desk. Technically speaking, none of these models were created with the intention…
A simple box to store a safe deposit key. The box is intended to store a single key, and since typically two keys are issued you should print two boxes - this makes it harder to lose or misplace both keys. In addition, the boxes are sized…
Pretty much the same as the original, only made it a bit more optimal for printing (less supports needed). Print with: Draft - 0.24mm Cross Hatch infill, 15% Supports - Tree/Organic (auto) Edited in OnShape:…
Remix of camera reposition for Sovol SV08 Takes a M3 threaded heat insert in the center. Make sure you set it at the correct angle, don't just melt right thru it. Camera cable is just long enough, may need some cable adjustment. Flip the…
Add items into this tray and have an easier time depositing them individually, With the aid of the angled spout. Just enough to restrict the flow of parts. Handy for organizing small parts into bins, or bags. Available on Thangs where you…
[ FLIGHTPATH ] , a 90° Offset Filament Runout Sensor mount for the Centauri Carbon that uses the 2 OEM screws, no supports, & the OEM cable & PTFE tube length. Designed to route the PTFE tubing straight upwards rather than from front to…
THIS IS NOT MY DESIGN!! This is a repost of LKM's wonderful Mini NES Pi 3 case. LKM does not appear to be on the site anymore, but I wanted to preserve this wonderful design. There is a chance the nes pi scad is modified, but it should be…
Reposavasos inspirado en un disco de freno de un coche. el soporte tambien esta inspirado en un pinza de freno
I designed and 3d printed this mount for a BBPOS WisePOS E card reader Mount it anywhere! Supports may be required, I printed this with a Bambu X1C 3d printer and regular PLA filament I used 2x small screws, non-countersunk Included the…
Attach this clamp to the edge of your desktop, swivel your speaker to any angle you wish, lock it into position, and ROCK OUT! Maximum speaker weight: 8.3 lb (3.8 kg) Print Settings: 4 walls (minimum) for .6mm nozzle 6 walls (minimum) for…
The original design is great but it just collide with other model I am using, so i modified the base by lowering the angle. The angle is adjusted so it will also not collide with the extruder.
Optical Chin Rest (Adjustable Support for Head Stabilization) Keep your head steady for optical measurements or close-up inspections with this ergonomic chin rest. Inspired by professional optometry equipment, this model is designed to…
A stand for moving the original LCD display under the print table. Reduces the printer footprint and changes the angle
Uses same screws except requires 8mm steel shaft (I used DIN 931 8.8 M8 x 120 bolts shortened with with heads removed) through rollers. Only works with 2 inch belts. Suitable for high torque applications. The orignal model with…
Built on the foundation of the FDM4, the FDMDuos deliver stronger low-end performance with enhanced output below 100 Hz. If you like a little junk in the trunk, these bad boys are for you. They still carry the top end sparkle of the…
Bracket to move the position of the glass shelf between the two screw holes. I needed to raise the height of the top shelf to better display the LEGO Saturn V and lunar lander, and this solves the problem perfectly. Printable without…
Un petit modèle de repose baguettes simple.
Swivel your desktop speaker to any angle you wish, lock it into position, and ROCK OUT! Maximum speaker weight: 8.3 lb (3.8 kg) Print Settings: 4 walls (minimum) for .6mm nozzle 6 walls (minimum) for a .4mm nozzle 15-20% gyroid infill…
I've created the replacement part for the armrest latches of my Hyundai Sonata 2008, in my case they work great when printing them with SLA printer. He creado repuestos para los clips del reposabrazos de mi Hyundai Sonata 2008. En mi caso…
Support pour panoramique de la marque carestream.
A good friend of mine gifted me a card/bill only wallet and I made him a coin cache.
I've resized some of the boxes for Leon_H's spirit island insert. I like to have all the spirit materials in one box and everything else in the other. You Still Need the other pieces from Leon_H's Spirit Island Box These modified files…
Simply a paper towel holder with a pivoting lid to capture the paper towel roll. Support arm is fastend by bolt part and pin for lid should be glued in place if too loose.
I had the problem that the Couplers where laying all over the floor. So i made a solution Print in PLA or Other Filament. I used Support for the RJ45 Hole. A Mount / Holder For Telepost inc LPC Coupler. LP-700 / LP-500 Power / SWR Meter…
No necesita soportes y la configuración de impresión que uses normalmente tampoco va a llevarte mucha tralla. Una vez impresa: Lo pones en mitad de la tarta y espolvoreas el azúcar glas alrededor y retiras la cruz.
Porte papier toilette a fixer au mur a l'aide de vis (5mm de diametre). sert aussi a porter le téléphone de façon plane ou encore pour le regarder sans utiliser ses main. Toilet paper holder to be fixed to the wall with screws (5mm…
Recently i converted my CR10 extruder to a direct extruder. now the filament sensor sits below the extruder intake. So I designed a holder to attach it on top of the printer. since it is near the spool I made it rotatable. No glue is…
This simple stl file is provided as a quick way to confirm that your bed is level and properly zeroed all over, or that your autoleveling works as expected. If it is not the right size in any dimension, simply re-scale it in your slicer…
When we built our house, we didn't think we'd need a gate in the privacy fence, but later changed our minds. My builder charges over $800 for a gate, and they use some proprietary rail sizes that I couldn't find anywhere. So I decided to…
Deposit Coin for events to get your Bottles, Plates, Glasses etc. back and prevent fraud. Simple design without any logo
This is an improved remix of an already great idea and very nice model! Thank you @ https://www.printables.com/@shoeys_2048431 for that! However, I noticed a few things during assembly, which is why I redesigned some of the components.…
Citroen C4 Grand Picasso 2015 için Silecek Suyu Deposu Kapağı
Español: El diseño de esta pieza está pensado para poder dar un soporte adicional en los antebrazos a aquellas personas que por diferentes motivos no tengan la posibilidad de mantenerlos por sus propios medios cuando trabajan sobre una…
It's a Headset holder for the EPOS GSP600 headset on you're Ikea Kallax. It fits on the top and bottom side, not for the smaller parts in the middle.
luffy elephant gun from episode 689 just take luffys skin colored arm off and place this on
These are parts for upgrading my cheap, educational microscope . It is unlikely you will be able to use any of these parts for your own purposes and these are uploaded simply for those who are curious about the looks of and the number of…
for each leg are necessary (también necesitas, para cada pata): - a 50mm long M8 screw (tornillo M8 de 50mm) - a nylon lock nut (una tuerca autoblocante de nylon) - a washer (una arándela) - some non-slip element to put on the bottom of…
Edit 26.7.2021: Small modification of the wall thickness. Set extrusion width to 0.4 mm. I don't like the original hinge pin design so I prepared my own. Tolerances are made for my printer and are really tight. Thanks* @bartnijs * for…
🇵🇱 Polski Opis: Praktyczny i estetyczny brelok do kluczy z napisem „Kaucja 0,50 zł” oraz symbolem cyrkulacji/recyklingu. Idealny dodatek do kluczy, portfela lub torby, aby pamiętać o zwrocie butelek zwrotnych i puszek! ⚠ Ważna uwaga…
This model is a type of micropipette based on single use Pasteur pipettes. I use it to drop small, controlled amounts of silver ink on electronic samples. You can use the control screws to handle repeatable amounts of liquid or use the…
Hello! This is a collection of my models for the Kobra S1 and the Ace Pro in .step format for you to use for remixes and modifications. 1: The vanilla fan cover 2: The fan duct closely modeled after the original 3: The Ace Pro insert for…
For all your ahem highly ethical decorative needs. This is a precision-designed stencil featuring the timeless (and totally not ominous) mantra: Deny, Defend, Depose. Whether you’re an insurance claims adjuster, an attorney, or just…
Hidden book-shaped safe deposit box to hide valuables.
After a tornado touched down nearby and I lost a few basic caps, I decided to make these. I would highly recommend using ASA or something that can handle weather exposure. Adaptive layer height is also highly recommended to get overhangs…
Work in process! Adjustable Tapo c110 for the SV08 gantry was designed to replace the stock camera. Depending on your setup you'll have to figure out how to route your cables. Would suggest printing the adapter in higher temp filament…
reposition of the extruder fan to allow visual access to hotend and filament. this thing adds an aluminium heatsink and moves extruder stock heatsink and fan 23mm far and 20mm right from extruder motor allowing for visual inspection of…
Découpé en 4 parties permettant de positionner 2 plaques de construction. Inspiré de Apexlayer.
The "Westinghouse Petite Crackle Solar Path Light, Black" is both very cheap and quite pretty. Here is a mount you can print to stick them on fenceposts or other flat surfaces. Instructions Why use these lights on fenceposts instead of…
This adapter moves the Filament case from the back to the side using the handle slot as the anker. There was no need for glue or sticky tape to hold adapter in to the handle slot, friction was enough. Recommend to printing both parts…
Still have a bit problem with printing it, it wont stick to bed even with support, but maybe useful
Spool holder reposition with filament runout sensor attachment
Espátula multiusos para cocina y repostería. Sirve para cortar alimentos blandos, como pasteles, o para untar tostadas u otros alimentos. IMPORTANTE: Imprimir objeto en un material NO tóxico No lavar con agua caliente
EPOS GSX 1000, Sennheiser GSX 1000 or Sennheiser GSX 1200
Oto kol dayanak, مسند ذراع تلقائي ,repose-bras automatique, otomatik kol dayanağı
What y made and why: If you escalate it smaller (60% in my case) some of the parts aren't recognized by the slicer. I repaired the files with orcaslicer. I also change the position of the models for the best for FDM 3D printers. -------…
I wanted to reposition the screen to have it vertical, saving a bit of room. This will take M3 screws and bolts to attach the screen to the block. Here is the raw onshape link if you want to mess with the model :…
Reposa pies para silla de ruedas en dos piezas para mayor resistencia se recomienda imprimir en ABS o PET si utiliza boquilla de 0.4 sería importante darle 4 o 5 perímetros relleno 30-40% el modelo 1 seria conveniente imprimirlo vertical…
Modelado en Blender pensado para impresión 3d en PLA. En 3 colores y separados por piezas sin soportes. El montaje es muy sencillo, una pieza inferior negra, una bandeja principal azul y aditamentos blancos que van montados encima.
A mechanism to deposit materials for recycling to be mounted on a robot fitted with a recycling bin. This was made for the third major project in the first year engineering course ENGINEER 1P13 at McMaster University. This robot would…
Sert à reposer les cuillères ou autres ustensiles rempli de sauce pour ne pas salir la table ou le plan de travail
Tirador de la cadena de water SUPER COMODA. Tenia el tirador comprado de metacrilato todo golpeado en sus esquina de chocar contra la pared i decidí diseñar uno y que fuera bonito y practico. Fue uno de mis primeros diseños. Tiene un…
I printed the holder shown in the pictures in Prusa Galaxy Black PLA on a Mk4 with a 0.6mm nozzle in DRAFT mode. Nonetheless, it came out quite nice.
Wanted a base to put my EPOS speaker into and hold it at a 45 deg angle. Model is EPOS A00306. Printed with lightning infill at 25% and tree supports for the cord hole in the back and fuzzy skin. V11 has a loose fit (4.5" dia). V12 has a…
Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled.
J'ai imprimé ce repose baguette en PLA avec supports sur mon imprimante Artillery Hornet en réglage optimal 0.16mm pour un beau rendu du riz.
For more strength use 5 or more perimeters, 20% infill and print on its side for more hardness
Set of Shopping Cart Deposit Coins for you to choose from, in case you don't have a coin when going to the supermarket. The coin has a hole for a key chain so it always goes with you. The coin has a flexible design feature, allowing it to…
This is just a simple hook. The logo is the “multi-use-bottle” deposit sign. No support needed.
![[Repost] Assassin's Creed: Unity "Phantom Blade"](https://media.printables.com/media/prints/2e2d9fe4-4893-4c4b-bd29-add971ea9b24/images/10225232_36bee81a-302c-4310-8561-09fb05e5ecaf_383f2f63-de54-46aa-88ce-ec5ffc93dcd4/fade169bb9865a1e9dcf29bd14abd057.jpg)
