2301 modeli
An elegant stand to help organize and hold jewelry of different shapes and sizes. Includes a recessed tray on the bottom for smaller items such as earrings, and the three arms can then easily accommodate bracelets, necklaces, anklets,…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
Simple tree jewelry holder. Print instructions Version edited means that stl files have been changed for Prusa MK3/S/S+. All you have to do is download and slice them. Version 100 means the stl files are unedited but they are larger than…
Wydruk około 2,40 €–2,94 € nettoWstępna wycena jednego wariantu
IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 1 controllers. If you are looking for the Quest 2 version, see here . Introducing the "Chewey_GLK-17_Q1"! For more details, please refer to…
Wydruk około 5,99 €–7,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 04.01.2024: I noticed a few mistakes, most importantly the screw size for the front tunnel, which is M3x12mm and not M3x10. I did some changes to the model because I noticed I was measuring the height at the wrong place. While I…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
Jewellers / Model Makers Vice You can rotate the workpiece 360 degrees and tilt over to 40 degrees. The top ring of the base is designed to provide resistance on the ball with out it being fully locked. There is a locking screw on the…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
My take on the hubs needed to make a geodesic sphere. I made this sphere to act as the outer cover for an RGB LED light ball. Essentially, I want to make a big ~60cm RGB snowball winter decoration. My plan is to wrap this sphere in cling…
Wydruk około 7,96 €–9,73 € nettoWstępna wycena jednego wariantu
A small, simple jewelry box with a ring holder and a strawberry pattern. The interior sections have sloped walls to grab things easily and varying depths to organize. Printed with PLA 0.15 Quality settings
Wydruk około 9,09 €–11,11 € nettoWstępna wycena jednego wariantu
uses 14 screws
Wydruk około 10,29 €–12,58 € nettoWstępna wycena jednego wariantu
This is a spice rack for spices you can get at the german retailer REWE. It is their own brand, REWE Beste Wahl. This spice rack was modeled to be close to this model by OSXTraveller . It is however a completely new design. Still, this…
Wydruk około 3,67 €–4,49 € nettoWstępna wycena jednego wariantu
This drain cover was printed with PETG and the parametric design is in FreeCAD. To adjust the diameter or thickness off the cover, simply modify the spreadsheet in the model. There are supports on the bottom with parameters that can be…
Wydruk około 9,67 €–11,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Another model of my jewelry box - now for rings, pendants and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky). CZ: Další model do mé série…
Wydruk około 8,34 €–10,19 € nettoWstępna wycena jednego wariantu
Concept & Inspiration The Diamond Valentine Collection explores the contrast between precision and emotion. Inspired by the brilliance of cut diamonds and the timeless symbolism of the heart, this collection transforms internal structure…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Intro Elevate your desk or dresser with this elegant seashell jewelry bowl , perfect for storing rings, earrings, bracelets, and other small treasures. Inspired by the natural texture and symmetry of a real seashell, this design balances…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
I use this for my dust collection system. I have used one for several month and found it works great. Four ¼ bolts needed, I used hot glue for lock tight on hinge bolt and to seal the pipes. Hot glue can be removed with alcohol. New slide…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
We wanted a gorgeous gory set for a favorite spooky time of year. Print either the necklace, or earrings or both. The filament shown in pics is “Blood of My Enemies” by protopasta, and it inspired the set. Size up or down but watch the…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
IMPORTANT UPDATE There is a newer version of the phone mount for VanMoof, which includes cradles for multiple phones and will be updated in the future. This version here will not see any updates in the future. You can find the newer…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
The Jewel Dodecahedron is a variation of the Face Turning Rhombic Dodecahedron twisty puzzle, with cuts which expose internal pieces that would usually be hidden. The cuts give the puzzle a crystal appearance, hence the "Jewel" name. Want…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
Beschreibung Grünes Monster mit weißen Hörnern – 3D-Druckvorlage Dieses süße Wesen bringt gute Laune in jedes Zuhause! Die Figur zeigt einen niedliches grünes Wesen vom anderen Stern mit großen Knopfaugen, freundlichem Lächeln und einem…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
Another necessary costume element for Rumi's Golden Outfit- its the thing that hangs on her belt, whatever it should be called. I saw people use beads and jewelry tools, but this was quick and lightweight. Sized for an adult costume, and…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Here's four varieties of plant clips that attach to a 4mm bamboo skewer stick. I prefer ver. 3 but ver.2 does fit much tighter. Just harder to clip on if there isn't a flat spot on your skewer to clip on then turn 90 degrees. Make sure…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
Heart shaped jewelry dish. Has a curved side to keep jewelry inside. The model prints well in PLA and PETG. It scales really well. Gcode files supplied for PLA scaled all the way up to 300%. At 300% it takes up almost a full Mk4 plate and…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
This 3D-printed jewelry-making assistant is designed to make painting and assembling handmade wooden bead jewelry easier, cleaner, and more organized. The design features three useful sections: 1. **Painting area:** A board with 14 holes…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Mit diesem Gehäuse, lässt sich unser Bewegungsmelder Modul 5V, leicht für viele Anwendungen montieren. Die versenkten Befestigungsbohrungen sind für unsere Modul-Befestigungsschrauben M3 geeignet und ermöglichen eine dezente Montage ohne…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
při jemném zmáčknutí bočních držáčků se otevře i klip s otvorem na špejli, zasune se špejle do otvoru a pustí boční držáčky, které sevřou špejli. Právě nyní používám k přichycení přísady paprik k uchycení ke špejli, aby se rostlinky…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Art deco styled jewelry component that can be made into a pendant or earrings. The photos attached to this model show you different ways these can be finished. You can glue beads, glitter or even decorative papers and other odd bits in…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Hello, Today I have for you T oothpicks, canapés, party . Suitable for skewering canapés. Decorates any food. Good for celebrating the new year 2026!!! Good printing! I used PLA/PETG as the material. No need to use supports!!! If you are…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
This is a remix of the sear from SillyButt's pump action skewer foam dart blaster . I was having issues with the sear not catching higher power springs well so I increased the width of the part of the sear that interacts with the plunger…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Um einen PSU-lock zu bewegen habe ich mit OpenSCAD ein Tool gebastelt, dass den PSU-lock aufnehmen kann und einen Knopf dazugestellt, damit die Finger nicht abrutschen. <…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Om dat er in de handel geen verloop bestaat van groot naar 14.2mm heb ik het zelf geprint. Ik had wel een rubberen verloop van 50 naar 30 maar dat was nog niet genoeg. Ik had het hele verloop kunnen printen van 50 naar 41.2mm en dan beide…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
I'm finding more ways to practice my Fusion skills while getting organized at home. The basic idea here is to sketch a solid body representative of an item that you want to sort in Gridfinity. This model can then be used as a ‘negative…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu
Ein einfacher Winkel zu Montage eines Bewegungsmelder (BOSCH Smarthome) vielleicht auch für ander nutzbar ! Gedruckt in PETG
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
100x160mm sign, with art of people arguing, reading “Buy fewer presents: talk about politics at Thanksgiving” Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
A cover I desigend for the generic Jewel 7 LEDs I purchased on Amazon. The holes are aligned for this model of Jewel 7 LEDs with 2 holes to match the PCB that are M2 screw holes. This version allows the wires to exit from the side.…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Printed with PLA, on 0,2mm layer on MK4 + MMU3 (won't be needed, also uploaded code for regular MK4 with Input Shaper)
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
An organizer designed in two versions: a free-standing tree and one with a tray base. Recommended print settings: 0.40mm nozzle 0.20mm standard profile 10% gyroid infill Commercial License: You can subscribe for a commercial license…
Simply print the two parts and connect the tree to the base through the slot in the middle. Optionally you can add a bit of glue. Great way to display your chains, bracelets and rings. Depending on your needs you have 3 sizes to choose…
This model is for personal use, If you want to support my work and get access to a commercial license you can do so on my patreon You can also check up upcoming models on my Instagram This is not a Christmas decoration ! more like a…
Super easy printing! The hand is placed on the tapered pin of the tray. You can glue them * if you prefer, but this is not necessary. The bowl is placed on the recess in the hand. Also with this one: If you prefer, you can glue them, but…
With this modern, minimalist organizer, you can neatly store earrings, necklaces, and rings all in one place ✨💍. The design offers plenty of room for your elegant collection. The model is printed in two parts (easy to assemble) and has…
Hello, I made this jewelry box for my girlfriend. So she can store rings, Earrings and other stuff like necklace. I made inputs for little magnets that the Drawers shut in a straight line. You need 16 of these. The original model is…
This is a stand for placing your glasses anywhere, such as on your desktop. It can also be used to display your favorite glasses. Print Settings Filament: Any Nozzle: 0.4mm Layer Height: 0.2mm or less Support: None…
This 19 inch 1U rackmount for the HP Elitedesk mini series is perfect for homelab enthousiasts that want 1 or more HP 1 liter pc's and rack mount them. The mount consists of two printed parts that both can be printed without supports by…
The Dewdrop Jewelry Tray brings elegance and functionality together in a beautifully minimal design. Inspired by the organic shape of a dewdrop, this tray features two smooth, curved sections, making it perfect for organizing rings,…
A set of floral jewelry. Available with mounting hole at the top of the blossom or included in one of the petals. You can choose from 4 daisy sizes. Dimensions Thickness: petals are 1 mm and 1.5 mm thick the middle is 1.5 mm thick → The…
A simple and elegant jewelry box with lid, available with different compartments and stackable. All you need for the lid is an M3 screw with a length of 6-12mm. I've also uploaded a one-piece version of the lid. Here you can use a color…
This remix of the original chain link bracelet is slimmer and thinner, yet still provides enough space to showcase eg. the carbon pattern. The smoother design reduces skin friction for more comfortable wear. It offers a stronger assembly…
I wanted a little organizer for my hair ties and jewelry, so I made this little low poly tree. Prints with no supports and no extreme overhangs. The tree just slides in the base after printing. 0.2mm layer height PLA I've used these…
This project prints in 40! different pieces, all of which get super glued together. The project is delicate and requires patience and care. It however results in a very, very nice decoration piece.…
Inspired by the elegance of marine life, this Whale Tail Jewelry Holder is a functional yet artistic addition to any space. Designed to resemble the graceful motion of a whale’s tail emerging from the ocean, it provides a unique way to…
Requires "tree" supports, no pun intended. If you break off a limb taking them off then your tree gets even better. SMALL BASE version pictured: Tree supports recommended: Powered by Image-to-3D from MakerWorld…
Allows you to store your jewelry and other small items in style. Required material: printed parts x2. Using PLA as a printing material, the strength of the product is enough to fulfill its function.
As a gift for my gf's birthday I decided to make another jewelry holder. This one's supposed to look like a tree (the pineapple hangers are another gift which I'm going to upload in foreseeable future). I made the tree with blenders tree…
A stand for four small ladies' watches with a bowl for small jewelry in the base. Note: I see that quite a few people use the stand for bigger watches – if that's your plan too, consider scaling the model up considerably. The original…
This is a multipurpose jewelry stand. It prints in six pieces. It is triangulated to be printed in two colors but can just be a single color as well. It optionally uses 2 2x50mm connector pins for increased structural integrity. It has…
This fit 220x220mm bed like ender 3 or bigger. Assembly is pretty straight forward, just remove the support on the tree and slide it into the base.
Printed in Polymaker PolyWood PLA with pastel Polymaker PLA
!WARNING! THE BASE HAS CLOSE TO 0 TOLERANZ! IF YOU WANT AN EASY FIT OR TAKE IT APART YOU EITHER NEED TO GRIND THE PIN (just a bit) OR SCALE IT DOWN TO ~98%!!!
Introduction When I was experimenting with a combination of TPU and PLA, I came up with the idea of printing a kind of fabric and making jewelry out of it. TPU is used here to ensure high flexibility. The PLA is supposed to add some…
Stitch Jewelry Stand modeled by Agouro I resized to 9cm height and rotated to print on the back to get less supports (everything included in the gcode). Post-processing : gesso, acrylic paint and satin varnish for acrylic.
Supports were added to provide stability while printing upright.
The FG 42 is arguably the coolest machine gun ever. This is a 1:1 prop model, with moving bolt handle and trigger. The magazine is detachable. Rubber bands or springs are required if you want operational bolt handle and trigger. All parts…
❗❗❗ PLEASE READ, IMPORTANT INFORMATION ON PRINTING AND ADVICE❗❗❗ A 3D printable jewel case for all your CDs or DVDs. I've had a lot of fun testing this model, and while it isn't flawless , it still works, and I am pretty proud of how it…
This is a .stl and .3mf model of a pickle i created. have fun!.
****FINALLY UPDATED to address lame design flaws**** Added threaded couplers to attach the post and post extension together and the post or extension to the top. If the coupler is too big on your print, scale it down a little in x and y.…
This elegant and functional jewelry stand is the perfect solution for storing and showcasing your favorite adornments. The model features a delicate hand that serves as a display for rings and bracelets, set on a bowl shaped like a lotus…
Introduction This jewelry box has room for 4 trays and is suitable for printing on a small printer such as a Prusa MINI. Instructions Print one of each item (or choose whatever trays you like), except the rails, which must be printed in…
Jewelry Display for chains and ear rings
This a T-bar style jewelry display stand for a single pair of earrings. It can be used at home or to display earrings that are for sale. The stand is four inches high and two inches wide. Printing Very simple to print. No supports, raft…
Ditch the overflowing jewelry boxes and tangled rings! This stunning 3D printed jewelry tree offers a stylish and functional way to organize your collection. Crafted using eco-friendly 3D printing technology, the design features a…
This is a small jewelry box which has the lid securely snap into place. It's quite small by default; I made a bunch at 1.5x scale. The original I derived it from has too round of a fillet at the bottom, so you may want to lower the model…
Liked the original but made it not require supports and the base not need weights by turning the tree's center of gravity no supports .2 layer height
A minimalistic stand for earrings with lots of storage for studs and hangers. This jewelry stand for necklaces was printed on the prusa mini which limited the dimensions to 178 mm in height and width. Feel free to modify those to…
The Whale Tail Jewelry Holder is an elegant and functional piece designed to bring the beauty of the ocean into your home. The gracefully curved whale tail rises from a smooth dish, creating the perfect place to hang rings, bracelets, and…
A small tray for earrings or rings. And a larger tray for glasses & contacts case.
This is one of my first tries at 3D models. The jewelry stand is somewhat minimalist and reminds me of a castle. This jewelry stand for necklaces was printed on the prusa mini which limited the dimensions to 178 mm in height and width.…
This geodesic dome was designed to be assembled as a cat/pet house. The dome accommodates a pet bed up to 400 mm (~15.75 inches) in diameter. It was remixed to be assembled using M3 screws & nyloc nuts. While you don't have to print or…
A decent and simple jewelry stand. After printing, only the T-piece must be plugged into the base. For my printer I had to downsize to 98%. The thin arms from the T are not incredibly stable. However, it is always enough for fine jewelry.…
No need for supports. I created a variety of different hangers for different types of jewelry from rings, classic earrings, cufflinks, big hook, Ear Tunnels/Plugs and some blank ones you can modify and remix. Assembly Clean up any…
Note: New dinosaur and larger versions HERE . Softly curved and glazed in a subtle emossed details, this elegant jewelry dish is the perfect way to store your most precious pieces. Its sleek, minimal lines will bring a touch of…
This ribbed jewelry and bathroom organizer set is certainly versatile. It consists of a tray and a jar with a matching lid. The button is attached to the lid with a small screw. Thanks to the ribbed structure, this set makes a modern and…
L'arbre fait environ 13 cm de haut et la coupelle 9.5 cm de diamètre. The tree is about 13 cm high and the cup is 9.5 cm in diameter. Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: impression à plat de l'arbre Les fichiers…
This stencil lets you determine your personal ring size and test if your 3D printer is calibrated correctly in terms of dimensions (X and Y). The sizes on the stencil are ISO (8653:2016) sizes and mean the inner circumference of the ring…
Jewellery Tree ,Hang jewellery from branches ,branches have holes for ear rings etc .Tray for smaller bits .Tree and cat glued to tray.Tray has recesses underneath to add weight ,stops unit falling over.I glued steel into recesses 55mm x…
Files are included for the crown, wand tip, pendant, and earrings. The crown includes hooks inside allowing you to strap it to a wig or headband. Prints without support, I recommend silk PLA. The gem files can be sanded/painted, printed…
Our 3D printable bracelet holder template offers you the opportunity to create your own stylish and functional jewelry organizer. This template allows you to elegantly display your bracelet jewelry while keeping your jewelry collection…
CD Rack STEP files are for a 15-15-slot model, but the Fusion 360 file can be used to adjust the number of slots in the parameters dialog. This is an initial version and I intend to improve the design. The struts connect via an…
The White Tree of Gondor, with a small tray for you to organize your rings and jewelry.
Design Concept The Knight Pen Holder is designed to evoke the strength and honor of ancient warriors, making it an inspiring addition to any desk or workspace. Usage This pen holder is perfect for organizing pens or small tools while…
11 mm stock. Fill with around 30 ml of water. No supports needed.
Display Stand for jewelry, necklaces, bracelets and so on. Print in the orientations used in the 3mf! Parts are pushed together after printing, requieres precise printing.
Can be printed at any scale you want. Base scale is 170x110x40 mm for the base and 170x110x20 mm for the lid.
Dieses Modell ist über Gelenke beweglich und in einem zu drucken. This model is movable via joints and print in palce. Material: PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 10 % / Support No Kein zusätzliches Material erforderlich…
Glue the parts together and paint it as you please. Warning! Results with fitment of the pins and holes may vary with you're printer. If you want the best results you should cut the full size sword yourself. Category: Toys & Games
Heyho Here I have various beads that you can use to make necklaces, bracelets or other decorations :) Scalability I used a 1mm thread. Theoretically, however, threads up to a thickness of 1.6 mm should also fit well. The larger the…
Print in whatever material and layer height you please. Should scale up well, just make sure scale is the same for each layer, as well as the lid.
Greaseweazle v4 & F1 Plus Mini Case with space for 3.5" Floppy *added new version of the bottom part that fits a Greaseweazle v4.1 **added new version of the top part with a Greaseweazle logo (add both the logo and top at the same time to…
Overview Jewelry holder with tray in shape of tree fairy. Print and connect. Printing Printed with Prusa mk2: 0.6 mm nozzle, 0.45 mm layer height, filament: Print-me Ecoline PLA Polar White, Plast-Spaw PLA Gold. Have fun :)
![Phone Mount for VanMoof S2/S3 [Legacy, newer version linked in description]](https://media.printables.com/media/prints/41892/images/418608_27bb6a0e-767c-4f68-becf-206b6da75dc2/vanmoof_s2_smartphone_mount_2020-oct-02_09-28-49a.png)
