113 modeli
I really appreciate you if you can consider a coffee for me if you like the design! Important - Non-Commercial (Updated on April 10, 2022) Version 2 This is a second version of my original Fitbit Sense & Versa 3 Charging Cradle I…
If you'd like a commercial license to sell physical prints of this model (It's a best seller on Etsy), please join my paid Club membership . An adapter that clips a Fitbit air pebble to a normal watch band. Enables wearing the fitbit air…
A quick couple of dock designs for a fitbit sense Printed in resin but should work just fine on FDM too You can slot the included fitbit sense charger into the dock Also works with Fitbit Versa 3 charger since they are the same. SJBuilds…
I designed this charging stand/watch holder for the Fitbit Inspire 3. This was made using Adobe Illustrator for the sketches and TinkerCAD for the modeling. Credit goes to @PRINTSY and their Modular Watch Stand for the inspiration. The…
Inspired by the Pixel Watch Charging Stand from dtphantom I created a similar design for my FitBit Charge 5. Printed in 0,1mm for a smooth surface. Needs a little support. Update 22.12.22: I added a version with a weight in the base. Just…
Charging stand for the Fitbit Charge 5. It doesn't really need any supports. Just lay it on its flat side.
If you'd like a commercial license to sell physical prints of this model (It's a best seller on Etsy), please join my paid Club membership . This is a continuation following comments from the original model that only have band loop on one…
Print model in default orientation with no supports
Stand for the original charging cable of Fitbit Air. Sliced BGcode is included, but basically print upright with painted on snug supports for the cable passthrough hole and thats it.
You can fit this to your 22mm watch band, and wear a Fitbit Air for health tracking on the underside of your wrist (it works the same as it would on top of the wrist). Multiple versions included: Centered: for wearing on the non-buckle…
This is the newly upgraded version of my NATO strap adapter for the Fitbit Air! I’ve completely redesigned it to be slimmer, less bulky, and even more comfortable on the wrist. The best part? It now prints completely support-free! I…
Simple bracket for the Fitbit Sense to sit between the bedside table and the bed without any wires. Charger clicks into place with USB cable going out bottom and the bracket has a built-indentation for “Medium” 15x60 mm 3M Command…
I remixed the Garmin watch stand for my wife's Fitbit Versa 2 watch. You can keep the charger in the stand to place/remove watch.
I liked the shape of pellcorp's charging stand, but wanted to change the hexagonal cutout on the stand support. I also changed how the wire is routed. The charger itself is held in very simply; you should be able to press fit charger into…
Simple charging stand for the Fitbit Charge 5. The original charger is put into the stand from the top and will stay in place there. The watch clicks into place and is hold there by the magnets of the charger. The stand can be printed…
Customization watch strap for Fitbit Versa Print instructions Nozzle; 230 C remove stringing if any with a hot needle. ABOVE SETTINGS BEING UPDATED- WILL HAVE NEW GCODE 5-19-19
Had poor luck with official fitbit charger. Decided to try this 3rd party charger and created this stand to fit it. https://a.co/d/3miagqw Hope you enjoy. I have added the cad files. Feel free to edit.
This is a STL for a replacement bumper for my son's Fitbit ACE LTE watch. He likes to take the bumper off and fidget with it on the school bus, so it was only a matter of time before the bumper flew off and got lost. The version marked…
Simple charging stand. This was a side project for my daughter's watch and I tuned it specifically to the tolerances of my MK3.9S+ printer using a 0.4mm nozzle. YMMV!! Requires M3 screws for assembly. Hardware M3 - 8mm x 3 Printing…
Stronger remix of https://www.thingiverse.com/thing:5023863 Category: Gadgets
I remixed thing:4915190 by vikram31 to make space to fit the charging cable for a fitbit charge 5 within the stand. Category: Gadgets
A stone-shaped low poly stand for your Fitbit fitness/health tracker. It fits both small and large band sizes of the following models: Fitbit Charge 6 Fitbit Charge 5 Fitbit Luxe Both halves can be easily connected with the dowel pins (In…
A stand to hold the charging adapter for the Fitbit Charge5
Same idea as the stand by Bruno Germany but a similar style to mathewsamual. Magnetic cable end should lightly click into place. The cutout in the back makes it pretty easy to remove if needed. Cord can be woven through the stand so it…
A small adapter that let's you loop through a Fitbit Air strap for the Casio CA53W. I printed using TPU 95A. I've only had it on a few days so I can't speak for it's longevity but it's been a fun project!
Stand for the Fitbit Ace 3
Your Fitbit charging cable for the SENSE will fit in this stand. A save place during you are charging the smartwatch. I have printeted the stand with PETG and have used some support structures (have look at the pictures). I have designed…
Added a gridfinity mount to a Fitbit charger. I also shortened how far the charger sticks out so it all fits in a single square. Also print on it's side
UPDATE: I've made an improved version that doesn't require support: This is my (old) version of an adapter for NATO straps to attach the Fitbit Air to them. This adapter prints perfectly from PLA and isn’t very bulky. However, it won’t…
I printed in a flexible TPU; the material was flexible enough to squeeze the band over the rigid clasp of the band without any need for disassembly or damage.
I removed the spring clips off a basic Fitbit Charge 4 charging cable and created a stand for it to mount securely into with no additional hardware. The Charge 4 snaps in securely and makes good contact with the charging pins. Cantilever…
A simple replacement for the Fitbit Inspire (HR) band holder/keeper/loop/retainer, mine was so worn down it teared apart. Printed with Real Filament White TPU 98A on a Prusa Mini+. It is a tight fit. You could try a more flexible filament…
A charging stand for the Fitbit Charge 2 for bands that remain a loop when removed Print instructions Category: Gadgets Print Settings Printer: Tevo Tarantula Rafts: No Supports: Yes Resolution: .2 Infill: 15 Notes: Must print with…
Hey everybody ! This is a stand for a fitbit luxe. I got inspired by another model from a fitbit charge 5, but that one didnt work for the luxe. Have a good one y'all ! You you have any questions, just ask. It requires minimal supports…
This is a case/holder for the Fitbit Charge 4 I designed after the latch on mine broke, preventing use of a normal replacement watchband. It is designed specifically to fit the watch band links found here -…
This is a replacement for the Fitbit Versa watch bands (both sides). Both bands broke and the old design was to flimsy so I decided to design a thicker band using TPU.
Prints on its side , no supports or adhesion. 0.2 resolution 20% infill. The charging port fits nice and snug in the oval hole, set your watch on top and no more having to balance your watch/charger hoping it doesnt get knocked and…
Years ago, I wanted a stand for my huawei smart watches but didn't like the options available. I ended up designing a stand out of wood and mimicked the watch pillow it originally came with to make my stand. Eventually, getting a Fitbit…
A charging dock that holds the connector in place while charging the watch. I've included 2 models: one for a thin wristband (pictured) and one for a thicker band. I've also included the SCAD source in case you need to modify it for your…
If the latch that holds your Fitbit to the band breaks, you need a new way to connect it to a band, or you need a new Fitbit - and this is way cheaper than a new watch. This should attach securely to any standard 20mm watchband, just use…
I wanted a charge stand for a Fitbit Luxe, and I loved the model from grizzie17. So I decided to make one model adapted to the Luxe Watch.
Das ist eine einfache Ladestation für eine Fitbit Sense 2. Die Öffnung ist so eng, das sie mit sanfter Kraft eingedrückt werden muss. Dann hält sie gut, wird aber schwer sie wieder raus zu bekommen. Ein Loch auf der Rückseite würde…
Replacement strap retainer thing for Fitbit Charge. Print instructions Category: Fashion Print Settings Rafts: No Supports: No Notes: Print in the the orientation it comes in as. I made this using petg and with one perimeter with no…
Introducing a sleek and practical charging mount tailored exclusively for the Fitbit Charge 5 and 6, utilizing the original USB cable. This meticulously designed mount elegantly plugs into any USB wall socket, effortlessly concealing the…
I liked the design, but I wanted to be able to print the whole thing without supports. So I altered the model very slightly to enable this. It takes a little more plastic, but I think it looks a bit nicer as a result. It's also a mirror…
Mounts the Fitbit Air sideways onto any 26mm bicep-style band, such as the Polar OH1 or Verity Sense optical sensor strap — keeping the tracker secure and flush during sports. Best printed in TPU for flexibility and a snug, skin-friendly…
Fitbit comes with a short usb charging cable, so created a little shelf for it to sit on while charging! Print instructions Category: Accessories
This was inspired by this model. However, I wanted it mounted to my Mophie Charging pad . I also designed it with these 3rd party chargers (I didn't have the original Fitbit one), so I can't guarantee the Fitbit ones will work flawlessly.…
This is an adapter to attach a Casio F-91W watch to a Fitbit Air wristband . The Fitbit is then worn on the underside of the wrist. Note that this works better if you don't have a small wrist. If your wrist is too small the end of the…
My fitbit band broke, I always wanted to have a survival bracelet with me but having both the fitbit and the bracelet was too much to carry. So I designed this for having both the bracelet and the fitbit in one small package :D Print…
A drop-in replacement for the watch band retainer loop from a Fitbit Charge HR, modeled using measurements from original part. Metal clasp must be removed temporarily to install this part. Print Settings Printer: Original Prusa i3 MK2…
My original Fitbit Blaze watch band holder broke, and I grew tired of using rubber bands and twist ties, so I designed this with Tinkercad. https://www.tinkercad.com/things/5Lc093YhNvq Print Settings Printer Brand: Creality Printer:…
Many Fitbit Charge 5 suffers from tracker falling off users wrist unexpectedly. This is caused by the locking latch that suppose to keep the band locked. See several user reports and Fitbit answer here . For me none of the suggestions…
fitbit watch support with brand and version
I love my FitBit, but I find the bottom of the body uncomfortable and it leaves a deep impression in my arm. I've looked around for other solutions, and there really wasn't much that interested me, so I decided to design a wristband for…
bracelet Replacement for Fitbit Versa/Ionic Print Settings Printer Brand: Creality Printer: Ender 3 Pro Resolution: 0.2 Infill: 100% Filament: TPU Category: Accessories
My wife needed a place to keep her Fitbit Versa 2 as well as her other daily jewelry and things. Remixing from @joefoeus version I added to the 1x1 stand and increased the size of the charger placement, since we have a 3rd party charger…
Did this in .12 just for fun to see how well it would look even with wet filament I have had laying around for over a year. It turned out ok, you can print this on the logo face to save on color switches or you could probably get a…
I wanted to make a slim custom sleeve and wristband for my new Google Fitbit Air using the drawing files provided by Google. It took a while to figure out their pdfs and the tolerance so I figured these might be useful to others, too.…
This is a slimmer version of the Fitbit Air adapter, remixed and modified from the original design by leonzz. It is designed to fit flexible 14mm metal bands, such as those for the Xiaomi Smart Band. Compatible max width: 15mm Compatible…
It's a chargingdock for your Fitbit InspireHR
The Fitbit Air doesn't come with a USB adapter, so this won't work for everybody. I created this for an adapter that I think came with a Pixel phone (the face dimensions are 40mm x 25mm). It should be simple to remix this to fit your…
The magnetic pins on the charger was starting to annoy me, if you didn't align it just right it wouldn't actually charge, grrrr To combat that, I mocked this up so you have to place the Fitbit on the stand and it's already aligned and…
Easy stand for fitbit charge 5. printed at 200° with bed at 65°.
I printed mine in PLA, .2mm layer height
Small stand for the fitbit air charger
Modulare Ladestation für Fitbit Air und Pixel Watch 4, Pixel Watch 3 inkl. 4 Armbandhalter. - die Module der Station sind beliebig kombinierbar - Die Variante auf dem Titelbild besteht aus: (von links nach rechts) - Abschlußblende -links-…
The Fitbit Flex is a wonderful movement monitor, a tiny device that captures motion during the day so you know how much you moved, how you slept, and so on. You wear it in a wristband which looks great, but is constructed of three pieces…
I was tired of buying new TPU bands for my fitbit that would inevitably disintegrate after a year or two so I set out to model my own adapter. I ended up creating this PLA adapter for standard 22mm watch bands. Print as oriented with…
Fitbit Charge 3 charger stand. Fits over USB plug. Included parametric CAD model.
My fitbit band broke, I always wanted to have a survival bracelet with me but having both the fitbit and the bracelet was too much to carry. So I designed this for having both the bracelet and the fitbit in one small package :D Print…
A stone-shaped low poly stand for your Fitbit fitness/health tracker. This design is smaller than my original Low Poly Fitbit Charge Stand , which makes it more portable and also more convenient if you are using a stretchable band.…
This is a watch band retainer for the Fitbit Charge HR. It may work on other FitBits, I'm not sure. Best printed out of TPU. *Originally uploaded elsewhere in December 2017, reuploading here
Newer version of the fitbit band for the Charge 2. Nicer, sleeker design intended for a delicate wrist. I no longer wear this fit, but the band is still useful and was designed to be more comfortable. I printed mine using Sainsmart TPU at…
This is an adapter to attach a Casio F-105W watch to a Fitbit Air wristband . The Fitbit is then worn on the underside of the wrist. Note that this works better if you don't have a small wrist. If your wrist is too small the end of the…
Wanted a permanent Solution for my Fitbit Versa 3 to charge. Modified the linked File. The Mount is available in left&right orientation so you can chose, what fits you the best.
NO glue required; the charger head fits in with friction. I added a bit of wood to keep the stand from toppling over, but it's not required.
I have thinner wrists and use the shorter bands which would not all properly span the original model by @Traincrossin. This printed great on my Prusa Core one with the 0.20mm SPEED profile, 5% infil. Filament in picture is Sovol Magic…
Fitbit Charge 4 excess band loop replacement. I broke the band loop on my charge 4 for the second time so I had no spares to use. The band loop is about 22x5x8mm(inside dimensions)x1.6mm thick with a small nub inside to help it hold…
Fitbit Sense Charging Stand i made it a little bit higher and the base more sturdy
Redesigned the Upper Part to take a PrimeCables MagSafe Charger and a Fitbit Sense\Versa charger
Update: changed the design to better fit the iPhone changer with a tapper to slide in for a snug fit My wife bought a Chage 5 Fitbit and I was looking for a way to hold and charge the watch at the same time. I saw a similar design on…
Keep your fitbit charge 5 charging cord organized.
Hey everybody, This is a mount i made for a fitbit luxe. It's installed as an undermount, you can use a screw or double sided tape. Category: 3D Printing
A simple clip on adapter for a Fitbit Versa 2 charger, with two 4mm holes on 45mm centers. I recommend printing in PETG or nylon, since it's a very snug clip on fit. I used M4x8mm screws to ensure clearance under the radius while still…
The ring on the band of the watch fitbit surge breaks off quickly and the band becomes blah. I have replaced the band many times and the ring is always the first thing to break. I made it soft by making it only 2 layers thin (0.6mm)…
All in one stand and charging unit for any version of fitbit watch where the magnetic charging plug is at the bottom of the watch. I designed it so you have a light friction fit on the mag charging plug, this i found allows a better…
its a stand for recharging your fitbit watch
Measured from the dimensions of my original, it was broken already so they may be slightly off but the fit feels good on my Large Fitbit Surge. I would recommend printing in PETG or TPU if you're able to remove the supports on the TPU…
I wanted to add the Fitbit Air to my Xiaomi Smart Band to keep everything on the same wrist. This type of adapter allow me to change my band color to match outfit! Is comfortable and small enough that it can sit on the side of my wrist to…
Use the smallest layer height your 3D printer supports to ensure the printed part is strong enough. Compatible with nylon quick-release straps (20mm size). I haven't tested it with stainless steel straps yet, so I can't confirm…
I'm using watch stands for all my Pebbles and so, I missed having one for my Fitbit Ionic. I've designed this in FreeCAD. It worked perfectly with the tolerances of my printer, but I've also included the source file in case you want to…
There are many useful health wearables on the market, but you only have so many wrists. This allows you to fit an Aktiia G1/ Hilo blood pressure monitor on the wrist strap of a Google FitBit Air so you can use both without your wrists…
A dock for the Google Fitbit Air with cable management. The lid screws on. Wind the cable up to your desired length and then screw the lid on.
My FitBit zip pocket clip broke. This file took about 2 minutes to print and easily fixes the problem. Instructions Used 123D Design . Part size is 10 x 13 x 3 mm. Inner hole measure about 7 x 1 mm. Inspired by Mother Necessity Category:…
Printed with tree supports in matte black PLA
I made this model because the adhesive on my Fitbit clasp pin wore out, and I'd rather make a solution than purchase a whole new band. This clasp pin is bulkier to account for using size to remain in place, instead of adhesive. It is…
Expanded the hole for the wire on the side to accommodate the strain-relief rubber near the connector.
Charging stand for Fitbit sense and magsafe charger. i used the following magsafe charger. Amazon.com: 15W Samsung S24 Ultra Fast Wireless Charger MagSafe Charger for Samsung Galaxy S24 S23 Ultra S23 FE S23 S22 S21 S20 S10,Pixel 8 7 6…
