93 modeli
We needed something to be able to hold the EFT unit to a charging base but also be easily unmounted, but the ones offered only allowed a more permanent solution. So I designed a base and screen holder to allow such a thing. I made it for…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Die elektrische Luftpumpe bis 25 psi hatte keinen Adapter für meinen Duotone Wing. Ich habe einen konstruiert und gedruckt. Er funktioniert prima. Vieleicht kann ihn ja der eine oder andere auch gebrauchen. Gedruckt in PETG oder PLA. Die…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of KP3S — Modular 4010/5015 Fan Shrouds with BLTouch Mount — Kingroon left panel with grill and m4 screw holes to fit 4020 fans. Some fitting problems . You should use +10mm longer screws on the left side. I advise you to use screws…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Halterung für SKS Luftpumpe, Deckenmontage / Bracket for SKS air pump, ceiling mounting
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a quick release plate for the Fidelity Electronic FTP-1. Used a standard, 1/4-20 UNC Screw that fits most cameras, was threaded so no need for glue. Print Settings: PLA 0.30 mm (make it 0.2 it if you want it prettier but slower)…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Luftpumpenhalter zum einfachen transport einer Standluftpumpe auf einem Followme-cargo. Zur Montage wird folgendes benötigt: 4x Zylinderkopfschraube M4x35mm 4x Zylinderkopfschraube M4x20mm 8x Mutter M4 2x Zylinderkopfschraube M3x15mm 2x…
Wydruk około 4,52 €–5,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introducing a replacement 3D printed mouse wheel for the Swiftpoint Z Mouse! This model was created due creator's original mouse wheel hex dowel snapping off, rendering the switch and wheel unsupported and unable to rotate. The problem…
full guide on: https://learn.adafruit.com/3d-printed-daft-punk-helmet-with-bluetooth Build a Daft Punk Thomas Helmet with bluetooth control! In this project we'll build the iconic Daft Punk Helmet with the ability to change animations and…
UTP/FTP Rubber Grommet Weather Seal for outdoor Security Camera / Junction Box The cut is thinner than the standard nozzle diameter, so you may need to use a cutter after the print is done. Use flex filament. Tested on a Hikvision…
Damit die Duftperlen nicht in den Luftauslass geblasen werden können, kommen diese in die kleinen Behälter. Die Behälter stellt man einfach auf den Luftfilter und verbleiben dort, bis die Duftperlen erneuert werden müssen. In jedem…
A 1x1x3 Kraftprotz glue holder build with Gridfinity Rebuilt
A small holder for a single air gun. Four mounting holes for M4 or wood-screws. Ein kleiner Halter für eine Druckluftpistole mit vier Befestigungsbohrungen, passend für M4 oder Ø4 Spaxschrauben. Printed in PETG; 0.25mm layer height; 0.6mm…
3D scan based outer shell/chassis of the Z2 mouse. Bare frame, top cap for LED section & base frame. Accurate enough to use instead of the original shell as I didn't want to destroy the original during modifications. Reliably printed…
Problem Das Abzugszüngel für die alte Feinwerkbau Luftpistole ist gebrochen und hält nicht mehr fest. Das Ersatzteil würde im Versandhandel wohl 7,50 € plus Versand kosten, aber wozu hat man denn einen 3D Drucker…? Druckhinweise,…
Print yourself a new tall trigger button cap for the Swiftpoint Z / Z2. This part is the same geometry as the original but may include some small modifications for the 3D printing process.
Skadis holder for four kraftprotz glue bottles. One of these glue bottles has a diameter of 38 mm. Printed in white PolyMaker PolyTerra PLA; used supports for the skadis hooks.
Print yourself a new long finger tip button cap for the Swiftpoint Z / Z2. This part is the same geometry as the original but may include some small modifications for the 3D printing process.
Print yourself a new short finger tip button cap for the Swiftpoint Z / Z2. This part is the same geometry as the original but may include some small modifications for the 3D printing process.
Print yourself a new short trigger button cap for the Swiftpoint Z / Z2. This part is the same geometry as the original but may include some small modifications for the 3D printing process.
Enhance your video conferencing experience with the MacLiftPro Stand, a precision-modeled stand compatible with the 16-inch MacBook Pro M1-M3 series. This innovative stand elevates your MacBook Pro, addressing the dreaded 'frog…
Upgrade the cheap feeling stock scroll wheel on your Swiftpoint Z2 to the hefty metal wheel from Logitech MX Master 3/3S which is widely available online for ~$15. This adapter keeps the electromagnets for the ‘ratchet’ click. For the…
Simple FTP keychain that doubles as a stencil. Print instructions Category: Signs & Logos Summary Simple FTP keychain that doubles as a stencil. Print Settings Printer Brand: Prusa Printer: I3 MK3S </div> Rafts: Doesn't Matter Supports:…
The ergonomics didn't quite work for my hands and I felt I always was reaching for the main buttons. When I pulled prints from bed, I gave them a little bend while they were hot to fit the tiny curve of the mouse button. Attached risers…
This is a quick release for the LiftPod . With a printed spring it snaps in quickly and securely, also you can rotate the LiftPod after it snaps in place. Even if you pull on the camera or the stand it won't fall down. However if you want…
Zip tie attached hose adapter for the FX 4 Stage PCP Air Pump or the identical Gehmann M100 4-Kolben compressed air pump. The hose holder can also be mounted without a cable tie, but then it might slip. The adapter should fit all pumps…
Lochabstand 63,5 mm. Sollte bei den meisten Bikes/E-Bikes Standard sein. Länge 100mm Durchmesser 25.0 mm Luftpumpe mit 25.0 mm Durchmesser passt . Solltet ihr es drucken würde ich mich über ein Bild freuen .
Casco Daft Punk Guy-Manuel
Adapter um Standuppaddleluftpumpe für andere Sachen zu nutzen
Korn für Steyr LP Auf meiner alten LP 5 hatte ich noch ein sehr schmales Korn. Bevor ich ein neues kaufe, wollte ich erst testen, welche Breite ich brauche. Daher habe ich mir die Körner konstruiert. Die Körner sind in verschiedenen…
Use PETG for heat resistence in your car. It makes a tight fit. If you like a loose fit you can scale it above one percent up.
This mount lets you attach the FlexPod to the back of your monitor using the 100x100 VESA mounting points. Perfect for holding cameras or lights, and probably does a good job for tablets/iPads etc. Category: Office
You want to hang your stand air pump to the wall? Now you can do it! ;-) For customizations I added the Step-File. I like likes and makes, not only because of the Prusameters. Willst du deine Standluftpumpe an die Wand hängen? Nun kannst…
1x1 Gridfinity Holder for Kraftprotz Super Glue Bottle.
Update 14/03/2020 : Added a slightly modified version as an alternative and a version more like the original from AA. Cheek piece for FTP900 or any air rifle in general. Print it as in screenshot upside down for better results. Print…
I was inspired by SergeBakharev's mount. I needed one with a bump for the VESA mount indent in my monitor. Decided to parametrize it as each monitor might have different screw sizes. The LiftPod mounting arms have the same spacing as in…
Ich habe hier mal ein Parkside Heißluftpistolen halter Konstruiert. Ich habe ihn aus Carbon Pla gedruckt. Nozzel 200 und 60 Bed Temperatur. Infill habe ich auf 25% Stützen Nein Das Modell der Heißluftpistole ist : PHILGA 20-LI B1 Dieser…
This is a simple 100mm VESA mount for the Liftpod mounting system . I modified the design from SergeBakharev in Blender because I only needed a single mountpoint.
Ich habe die Düsen für meine FLEXTAIL TINY PUMP X-Luftpumpe abgezeichnet, für den Fall, dass ich eine verliere. I traced the nozzles for my FLEXTAIL TINY PUMP X air pump, just in case I lose one.
Mit Resten von drei PET-G Rollen gedruckt und mit drei 6mm Schrauben montiert.
After extended use the top buttons on this mouse can wear out. These are 3D printed alternatives to extend the life of your mouse. There are two versions. One is a textured version like the original for SLA printers and the other is for…
I created a holder for the Kraftprotz Superglue 90g for the skadis wall. Support is required for the hooks. Print settings: Infill: 15% gyroid Layer height: 0,2 mm Filament: Prusament PETG
Simple holder to store a “Kraftprotz” superglue bottle. Specific superglue: https://amzn.eu/d/fruOrak or https://www.3djake.at/arka/arka-kraftprotz-superglue
Magnetic feet for LiftPod These magnetic feet make the LiftPod stand more stable on metallic surfaces. Disc magnets ø8mm x 3mm are required. It is recommended to use flexible printing material. It may be necessary to glue the feet into…
passend für Proxxon MH 550: https://www.conrad.de/de/heissluftgeblaese-inkl-zubehoer-500-w-proxxon-micromot-mh-550-27-130-822638.html Category: Tool Holders & Boxes
Easy to print, without any supports. Use two 4mm or 4,5mm bolts to screw it to the wall
Lagerbehälter für Kraftprotzkleber oder anderes mit gleichem Durchmesse für Skandisboard. Funktional aber Ausbaufähig
Gridifinity Kraftprotz Glue holder, 1x1 non stackable Thinkercad link: https://www.tinkercad.com/things/0dsL10ImjW6-glue-holder-kraftprotz-gridifinity Edit 12/04/2025: Based on requests, the model is now less tight and allows to pick the…
Skadis Wall Mount for Parkside Heat Gun This wall mount is designed for IKEA Skadis pegboards and fits Parkside heat guns. It provides a secure and space-saving storage solution, keeping the tool easily accessible in workshops or hobby…
Venturi Düse für Pressluftpistolen für höheren Luftstrom zum ausblasen und reinigen von Bauteilen. Durch den Venturieffekt wird der Luftstrom deutlich gesteigert. Ohne Stützstruktur zu Drucken. STEP Date zur einfachen anpassen an eigene…
Labor Ständer für 16x1,5mm Rohr Für die gedruckte Grundplatte benötigt man: 4x Senkschrauben M4x20 4x kurze Gewindeeinsätze M4 Aus gewichtsgründe habe ich eine 24mm Siebdruckplatte 200x150mm genommen. Dazu benötigt man: 4x…
This is an additional arm directed mostly to VESA mounted LiftPods. The side mounts on VESA mounts allows to mount an side web cam or any additional accesories. But for some of those they are rotated in the wrong axis (90 degree to the…
Ist eine Bessere Version von meiner älteren Bierkiste eben nur mit einer Einkerbung für eine Schriftplatte
Ein einfacher Wandhalter für eine Fahrrad-Luftpumpe der verhindert, dass das Ding immer umfälllt.
Hello there, this is a gridfinity compatible bin capable of holding one bottle of kraftprotz glue. It uses 1x3x6 units in the standard gridfinity system but sadly nothing can be stacked on half of it. Its my first somewhat self designed…
See https://github.com/SMerrony/picowtftpanel for details. This display uses the cheap 3.5" SPI TFT Module (SKU: MSP3521).
A smaller hand rest for Air Arms FTP900. Category: Sport & Outdoors
The rubber button caps on my Z started deteriorating so I figured why not print new ones, so here we are. Print Settings: These files are not designed for any specific print settings, that being said, I printed them with the Standard…
Die sind zwei Kappen für eine Luftpumpe die mir leider geklaut wurden. Jetzt kann ich mir soviel Nachschub drucken wie ich will. Ich habe beide mit TPU 95A gedruckt.
This mount keeps vertical style rear light perpendicular to the ground. That was main purpose when designing. Second purpose was to make it theftproof / unmountable. So the only way to take off the light is to unscrew whole thing. OTH…
LiftPod – Print-in-Place Desk & Bathroom Organizer Keep your everyday essentials organized with the LiftPod, a versatile organizer for your desk, bathroom or vanity. If you find this model useful, please leave a like! ♥ Features Nifty…
A lightweight barrel clamp for FTP900. If you have a free float conversion with carbon shroud this barrel clamp can be used instead of the factory one. The design does not touch the barrel but has 1mm clearance around the shroud, its just…
Support structures: Yes Material: PLA
In mobile use of the Gehmann M100 or the identical FX 4 Stage Air Pump, the bulky and heavy original stand is a nuisance. That's why I made a folding stand. Two simple M8x55 screws or printed bolts (56x8, glue if necessary) can be used to…
Tilantie Luftpflanze Rahmen Rebuild nach einem Design auf cults... Durch die Löcher wird ein dünner Nylonfaden gezogen in dem die Tilantien eingehängt werden. Benötigt werden 2X M3 Schrauben, um die Füße zu befestigen. Bitte beachtet auch…
Für meinen Anbauteileträger Dynabike Klapprad https://www.printables.com/de/model/841288-anbauteiletrager-dynabike-klapprad Gedruckt habe ich die Teile aus ASA, da witterungsbeständig. 30% Infill 4 Wandlinien 3 Obere und untere…
Neue Ablagehalterung für die Daytools Heißluftpistole LS-8908 zur Montage auf dem Gehäuse. Die seitliche Anbringung des Halters hat mich schon immer gestört, weil hier Platz verschwendet wird. Hier also ein Halter, der auf dem Gehäuse…
Staub/Dreckschutz für die SKS Airmotion 12.0 Luftpumpe
Updated LiftPod clamp to accept wider arca swiss plates e.g. on camera L brackets. Provided on its own and with the moving jaw of the clamp included as that is part of the same file in the original liftpod files and not available to print…
pretty self explanatory. print recommendation in pictures
I created this battery connector in order to better support a diagonal connection layout with my EEL based battery pack. You would properly want to use a flame retardant filament - for me it was enough for now to protect the terminals.
I used mamut glue to mount. Use zip-ties to mount cable.
LiftPlane turns your airplane tray table into a stable viewing station. Compact fold for storage. Engineered to fit most tray tables without blocking the surface. Prints in one piece—no supports. Part of the LIFT series. If you would like…
Venturi Düse für Pressluftpistolen für höheren Luftstrom zum ausblasen und reinigen von Bauteilen. Durch den Venturieffekt wird der Luftstrom deutlich gesteigert. Ohne Stützstruktur zu Drucken. STEP Date zur einfachen anpassen an eigene…
Skirt and TFT50 screen frame with an optional SD card remote reader for updating Firmware. These parts are designed to fit and blend with the original Voron 2.4 skirts. Parts Used: BIGTREETECH Upgrade PI TFT50 V2.1 TFT LCD Display Micro…
Soporte para pegamento Kraftprotz de Arka para el panel Skadis
In order to practice with my air pistol in the basement, I constructed a simple shelf to safely store the air pistol. I designed it so that the round magazines for the pellets, the air cartridges and the container for the pellets all have…
Anti-Scratch Pads for Sega Dreamcast CD area Reproduction of the original soft pads inside the Dreamcast lid to prevent disc scratching. Thickness : 0.5 mm Quantity per console : 2 pieces Can be made by : – 3D printing in TPU – Laser…
Kraftprotz Glue Side Shelf Holder for Bambu Lab Printers Keep your glue/adhesive right where you need it with this dedicated side shelf holder designed specifically for Kraftprotz glue . This accessory mounts neatly to your Bambu Lab…
Schlauchadapter für Doppelhub Luftpumpe mit " Hose Barbs" zum selbst halten ohne Kleber Kurze Ausführung zum Anschluss an Pumpe und Schlauch mit und ohne drehhilfe Lange Ausführung zum Anschluss an den Schlauch Hose adapter for a…
This is a Replacement Rubber Drafting Pen Boot for the HP DraftPro DXL/EXL carousel (HP 7575/7576) Pen Plotter. It also fits the 7475A and others. My DraftPro carousel was missing several pen boots that prevent the pens from drying out…
Keep your Kraftprotz Super Glue bottle secure, upright, and ready to use with this custom-designed magnetic bottle holder. Designed to prevent the bottle from tipping over and leaking inside drawers, the holder features four recessed…
For DIY my e-bikes I often simply use u-shaped profiles out of aluminum bolted to the frame via waterbottle mounts. This works fine so far but you have to produce slots in the profiles for the mounting straps. Since I do not have…
this is a 76 percent keyboard plus a numpad on the left side see https://github.com/RyanChomistek/lefty for the kicad project and gerber files
einfache Bodenplatte für die Heißluftpistole YIHUA 959D-II + Oberteil für die Düsen. unter der Bodenplatte habe ich eine antirutschmatte geklebt. Oberteil habe ich mit doppelseitigem Klebeband befestigt…
Glue Holder for Kraftprotz or other 38mm cylinder objects (Diameter: 38mm) for Honeycomp Storage Wall. You need one hollow insert. I printed it with petg, 3 walls, 20% infill.
Designed for the MODRA System. Designed for 39 mm diameter 3D printing glue bottles such as Kraftprotz 3D Druck Sekundenkleber. Keeps the bottle secure and always within reach. Recommended Print Settings Material: PLA 19%, PETG 15% Walls:…
pretty self explanatory. print recommendation in pictures
Kraftprotz Glue Side Shelf Holder for Bambu Lab Printers Keep your glue/adhesive right where you need it with this dedicated side shelf holder designed specifically for Kraftprotz glue . This accessory mounts neatly to your Bambu Lab…
einfache Bodenplatte für die Heißluftpistole YIHUA 959D-II + Oberteil für die Düsen. unter der Bodenplatte habe ich eine antirutschmatte geklebt. Oberteil habe ich mit doppelseitigem Klebeband befestigt…
Lagerbehälter für Kraftprotzkleber oder anderes mit gleichem Durchmesse für Skandisboard. Funktional aber Ausbaufähig
Daft Punk TB3 and GM08 helmet to be printed in one piece Each Below are the printing parameters. Thanks for stopping by :) No comercial use. Personal use ONLY Link to Patreon :) patreon.com/Artoys3dPrint Casco de TB3 y GM08 de Daft Punk a…
![Daftpunk Helmet [Thomas Bangalter]](https://media.printables.com/media/prints/7156/images/50835_a09826a7-6b83-4f26-af9f-b181e4214238/hero_ex_6_7156.jpg)
