MagMad 3D Printed MagSafe Stand
3D printed version of the Nomad MagSafe charging stand. Pause mid-print to insert 3 ASC ¾" washers for weight in the base.
- Pobrania
- 1744
- Polubienia
- 113
- Ocena
- 4,86
807 modeli
3D printed version of the Nomad MagSafe charging stand. Pause mid-print to insert 3 ASC ¾" washers for weight in the base.
I printed the sculpture little bit bigger than in .stl . As a template, I used sigma squidward. Enjoy your printing, and a enjoy moai! And don't forget to follow me for more models;}
WARNING: This is a CHALLENGING project. You will need a well-calibrated 3D printer, and the patience to handle a lot of very fiddly small screws. This replica model is based on accurate blueprints and measurements from an actual World War…
Print in the original orientation of the STL file. Enjoy printing! Prints without supports Dimensions: 32*32*32mm when collapsed. Might need a little bit of breaking in. Based on this LEGO Minecraft magma cube. I saw it and immediately…
The PW-Mk.1 or Project Wingman Mark 1 is a fictional fighter jet from the game Project Wingman . This fighter jet has twin Cordium engines, essentially just nuclear engines. For its armaments it has guided rocket pods on along the top and…
I wanted a rear light for my old MBK Mirage that light up when I go through a tunnel and when I pull the breaks. The Sigma Blaze does it perfectly. You'll find what you need to plug it under the saddle with two serflex. NB : this bicycle…
Distanzscheiben für Sigma Sport Navihalter, da ohne Scheibe mein ROX 4.0 kontakt zum Vorbau hat. Längere Schrauben ist notwendig → Original M3x6 (Senkschraube) Spacers for Sigma Sport navi mounts, as my ROX 4.0 has contact with the stem…
Blanking plate for consumer unit (Schneider Pragma Mini) Universal blanking plate for safe covering of unused module positions in consumer units. Originally designed for Schneider Pragma boards, but also compatible with many other…
A minimalist pen holder for 7 Sakura Pigma Micron pens , designed for clean looks and efficient printing. Optimised for 0.6 mm nozzle with single-wall extrusion for a light yet rigid design. Works perfectly with a 0.4 mm nozzle if you add…
Die vorgesehene Montageposition des Wärmemengenzählers ist unglücklich. Entweder hochkant oder irgendwo an der Wand. Dieser Halter löst das Problem flexibel. Mit dem Halter kann der Zähler an den Speicher gehängt oder auf den Brenner…
Original by Rnagp - https://www.thingiverse.com/thing:4862154 Waited for this to show up here long enough. Here it is! Supports on bed plate only. I used a .4mm nozzle, 2 walls and 15% infill. Turned out perfect! Pics of them on chickens…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
This original design puzzle box, with hidden latches, sliding panels, a mystery dial, and covered with runic symbology, is the perfect place to keep your most valuable keepsakes safe (from anyone without a hammer). It requires just the…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop This system uses 3 pieces: Rings - Solid rings, especially .10mm layers are almost unbreakable. Links - Oblong links that connect the rings in whatever pattern you want. Locks…
Build Videos P1: https://www.youtube.com/watch?v=nPZfvoYlkRc P2: https://www.youtube.com/watch?v=hSb7K_NrlCI Hey everyone! This is my model of the Wingman from Apex Legends, it's pretty accurate, I've made a few videos on how I designed…
Buddy Christ is a parody religious icon created by filmmaker Kevin Smith, which first appeared in Smith's 1999 film Dogma . Buddy Christ . Is a photogrammetry model made using 100 photos from a “Buddy Christ” acquired eBay, and many hours…
All related data and arduino sketch in: https://github.com/Menyiques/Enigma Printed on PLA on a MK3S with MMU2S. Working video: https://www.youtube.com/watch?v=k2SRl5kKgS8
Introducing our newest creation: the Magma Dragon Figure ! 🐉🌋 Embark on an epic adventure with our intricately designed 3D printed toy, perfect for dragon lovers and those with a fiery spirit. Now available as a convenient keychain, you…
Watch the video here: https://youtu.be/v\_L7Zu5NkXQ Cuphead and Mugman are here! Whether you rage quit the game, or love the punishment, one thing is for sure, Cuphead is a beatiful game. So I was very excited to try to bring these two to…
My remix of the vasemode tulip envisioned by Pezliz and brought to life by Bugman_140. This is a more closed up version to add some variety to your bugman tulip bouquets. I've also added my own “twist” on a vasemode stem. Prints in spiral…
I had seen a set of pallet coasters but wasn't quite happy with the model, so I fired up Fusion and recreated to spec a GMA pallet, then scaled it to about 1:11th (3.5:40). Found it would actually slice quite nicely at 0.20mm height, so I…
Build, Battle, and Defend – Try the Free Gatehouse Sample! This Gatehouse is a completely free sample from my larger Modular Medieval Castle set — designed for 28mm wargaming and fantasy RPGs like Warhammer, Dungeons & Dragons, and…
STL files to 3D print mold components and PDF files for patterns to make a Medium multitool sheath (patterned to a Leatherman Fuse - also fits a Wingman with clip attached). Finished inside dimensions are: - Medium Multitool 4 x 1.3 x .7”…
Fourth set of Sonic figures based on Dr. Eggman and other Sonic villians. Set includes · Modern Eggman · Metal Sonic · Chaos · E102-Gamma (Still Painting, will update when done) · Infinite (Both with the blocks as a base and Infinite and…
The mount holds the bike light in a snug fit. Use M3x4 screw to fix the light in the mount (optional, but recommended). Due to the tight fit, PETG is recommended (Also because of the dynamic loads on the part during driving) Printing in…
Version 2 here! [still printables site] Witch King of Angmar Bust The perfect helm didn't exist. At least not what i see as the “right” proportions of the helmet. So i designed it my self after many attempts here it is. ⚙ Considerations:…
Bring a galaxy far, far away to your desk - with a wiggle! This R2-D2-inspired flexi bot is an articulated, print-in-place design - no supports, no assembly for FDM, just instant Star Wars fun! 🛠 Easy support free print in place printing.…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
fruit du demon de akainu remplissage 20% imprimer avec support
Found over at https://sketchfab.com/models/2601297f223a441086c7a44fc34a879d And a special request by Corey http://www.thingiverse.com/ROCKETNERD/about Good luck with printing and post the results : ) Merry Xmas Jace PS I've uploaded all…
WC Pusher Plate (Drückerplatte), compatible to Geberit Sigma I accedentaly bought a Delta pusher and had to fit it to a Sigma backend. Instead of returning it and getting a fitting (and more expensive one) I made a Sigma-compatible pusher…
Adapter for Geberit Sigma Flush Plate on UP100 Cistern The Geberit UP100 is a popular concealed cistern model. However, its compatible flush plates often lack the aesthetic appeal of the Sigma series. Unfortunately, Sigma flush plates are…
Adapter for toilet module GEBERIT DELTA. You can use the GEBERIT SIGMA buttons. Instructions: remove DELTA button remove black frame and parts add adapter frame and new parts use spring and blue wedges add new SIGMA button Printed on…
A set of gaming tokens or markers for use in table top gaming. This set is part of series of releases with similar dimensions that allows for multicolor printing with a simple layer switch. This set is for the game Age of Sigmar, and was…
Add brutal cavalry power to your tabletop army with this 28mm Orc Hogrider - straight from the world of Vogland! This highly detailed miniature features an enraged orc warrior riding a snarling hog, designed for fantasy RPGs, wargames,…
These are the runes of the runeword Enigma "Jah - Ith - Ber" from Diablo 2.
Dogman Bookmark.
Dr Eggman, a character from Sega's Sonic the Hedgehog series. Doctor Ivo "Eggman" Robotnik is the main antagonist of Sega's Sonic the Hedgehog franchise. Eggman is a mad scientist who seeks to steal the mystical Chaos Emeralds, defeat…
INTRODUCTION / DISCLAIMER Two versions of the frame : one compact single deck for analog only, and one split-deck with a longer tail for HD systems. This frame is designed for a tilt between 0° and 30°, as there isn't much room on the top…
I had the porblem that my bicycle lamp sigma aura 100 was mounted on my handlebar and it did shine onto the garmin navigation device. I had the opportunity to mount it under the mount with a GoPro-Mount. So I designed a holder for my lamp…
Simply add beer and add the lid, then watch as Slugmageddon effectively lures and traps slugs, keeping your plants safe and thriving.
This is Mini VogMan - the chubby-cheeked, thumbs-up, always-positive maker sidekick from the VogMan universe. Whether he’s cheering you on in a build or making a surprise cameo in a YouTube video, Mini VogMan is the printable embodiment…
This is a remix of the handle (hilt) and pommel of neburindustries' Lord od the Rings - Sword of the Witch-King of Angmar sword ( https://www.thingiverse.com/thing:4128110 ). I wanted to be able to run the rod all the way from the pommel…
I wanted one, so I made one. Not scaled, sizings eyeballed, but it looks pretty good and is decently accurate to the geometry I could see without having the models themselves. This includes the inner face of the orb. The model is around…
Add muscle to your orc warband with this battle-hardened warrior from the world of Vogland! This 28mm fantasy miniature is designed for tabletop RPGs, wargames, and display builds. A perfect fit for any orc horde, enemy faction, or brutal…
Garmin/Sigma Rox 11 mount above stem Again another Gramin / Sigma Rox 11 mount for a handlebar diameter of 31.8mm. I Designed this for my own needs (fits perfect over a canyon v12 stem) so i hope it fits for you. It's easy to Print but…
Mount a light to a gravel bike upside down is not as simple as thought. The solution to my SIGMA Aura 80 light was to design and print a bracket to mount it beneath my QUADLOCK out front mont via a gopro adapter. Print upside down (flip…
Replica of the apex legends wingman.
This is a model i made to be possible to brint without too much struggle. You need supports on the sight and lower front of the model. Dont need to support where the guid pins will go later. You need to glue those two half together. PLA…
a copy of the fortnite medallion
I really liked InverseSandwich's design, but I changed it to suit me more moved the belt loop higher, so that the top of the Wingman wont dig into me when I sit down made the bottom slot go higher to make popping the Wingman out easier…
What a frustration not to be able to simply detach the lamp from the handlebar without removing the whole mount. So, I designed a sturdy mount that can be attached to a GoPro mount. This mount considers physical constraints, so the…
PRINTING SESETING: MATERIAL: PLA, PETG, ABS, ASA SUPORTS: Normal ADESION: YES
Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.
Printed in PLA with 4 perimeters - 2-piece print without support (One-piece print also attached, but more complicated to print) Combine parts with glue and screw tight (in the correct orientation) 10mm M3 screw used also find my Print in…
Easy open tab for the leatherman wingman utility knife. I got tired of trying to open it one handed and decided it needed an upgrade. Slight interference fit, meant to be lightly hammered or pressed into place to hold it in. I used a vice…
A points tracker for Age of Sigmar Spearhead. Points broken down into victory points and battle tactics. Fits 16mm dice. Printed with Polymaker marble PLA with ironing.
Just a little plastic piece from a Sigma Aura 60 Lamp (Mine works fine after 1 year of using it) Print Settings Printer: custom kinda Anet+ kinda E3D+ Rafts: Doesn't Matter Supports: Yes Resolution: 0,4 Infill: 100 Filament: Old stuff PLA…
The 10-series was the name for upper mid-size cars produced by Austin in four different reincarnations from 1911 till 1947. Within the legendary collections of wargamer models created by M_Bergman (…
I created this lens hood because the stock one did not allow me to install a magnetic filter ring on the lens.
An other mount for my Sigma Rox 11 (Garmin Base). This time for the Canyon G5 Stem . You need two M3 countersunk screws ... i used my dermel to shorten them. Design is basd on an other mount from Lars Vogelenzang but build from scratch.…
Not every orc goes to war fully dressed. Some just go full beast mode. This “Au Naturel” Orc of Vogland is a hilarious yet battle-ready addition to your 28mm fantasy lineup. Perfect as a berserker, wild brute, or NPC chaos-maker in your…
use this print so you can use your Pigma Micron markers in the Cricut Joy Plotter. I used 100% infill, but less will do I guess
this is a working for profile for JgMaker Artist D Pro printer. it may work with the non pro version I don't know. supports .16mm and .20mm layer height for right now only supports .4mm nozzle
Remix of original short and long latches with 2.5mm pins.
Meet the Flexi Magma Dragon! The first release in my new Magma Series! Six more creatures will join the collection over the next few days. For the cleanest results, especially when removing supports, I recommend using my provided print…
Roblox Blox Fruit - Magma Fruit Supports - Yes
I've knocked these together very quickly for the new edition of AoS, but would absolutely be compatible with other games. The central circle is 40mm in diameter, and the outer edge of the larger circle sits 3-inches away - no need to…
For 6 citadel paints and 3 brushes
He doesn’t wait for orders. He doesn’t care for armour. He charges first - and sometimes even survives. The Berserker of Vogland is a frenzied, axe-wielding warrior designed for 28mm fantasy battles, RPGs, and miniature painting. Whether…
https://fpvcncdrone.com/ suggested me to make a cage for the Pragma, so, here it is : p **********************************************************************************************************************…
A Perfect fitting Lens Hood for the Sigma 17-50 f2.8 Tested on a A1 mini
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
🧙♂ Witch-King of Angmar Figurine – Dark Lord of the North This highly detailed 3D model depicts the Witch-King of Angmar, the feared leader of the Nazgûl from J.R.R. Tolkien’s legendarium. Captured in a dynamic battle pose, the figure…
A points tracker for Age of Sigmar Spearhead. Points broken down into victory points, battle tactics, and points from twists. Fits 16mm dice.
Made for my kid's birthday party handouts. Add filament swaps at layers 6 and 9 (no need for multi material printer) Start with blue, then yellow, then black filament. Fits a large split ring, I found mine at Walmart.
Handlebar mount for the sigma buster light. I recommend to be printed in ASA. I used a mix of ASA for the main body the grey pieces and a PC for the black. ASA is better for the flexibility and pc for rigiditity. But just ASA/ABS will…
Needed a mount for my new bike and since there was no space on the saddle pole left for the default BLAZE mount, I decided to design one. The BLAZE light snaps into the mount, so no extra fixation is required and it can easily be removed…
Two models are available: Square Adapter Mount (Recommended) - Easier to print and does not require any supports. Circular Adapter Mount - Looks better but requires requires additional supports. Printing Instructions Note that depending…
Keyrambit spiner do kręcenia kluczami. additional elements:https://allegro.pl/oferta/lozysko-kulkowe-61803-6803-2rs-17x26x5mm-15713802966 material: PLA, PETG, ABS, ASA infil: 40% supports: NO
For the Wingman Frame Kit and Wingman BNF All meant to be printed in TPU, 0.3mm layer height, ~0.5mm width, no supports.
Overview: Make your first impression unforgettable with the TagMate , a sleek, 3D-printed NFC business card designed to combine functionality, style, and innovation. Whether you’re looking to share your contact details, direct clients to…
Here's a Fusion 360 Parameterized model for making your own Lagging tool. To use this, you'll of course need to be running Fusion 360 and from there, all you need to specify is the diameter of your pipe insulation (in either metric or…
Whistle in a moai head, simply the chaddest whistle in the world
Sigma ROX4 Speedometer Holder for fix with cabel ties
This is a small mod that can be screwed to the back of the Sigma 18-35mm f/1.8 lens that makes the image appear like that of an anamorphic lens, mainly by elongating the bokeh. This effect can be seen pretty clearly in this video by "We…
Dimensionally accurate 3D scan of A6400 & Sigma 18-50mm Some surfaces were unable to be scanned correctly, however overall shape is accurate. Basic mesh repaired model provided, however the repaired surfaces may not be accurate.
Gridfinity Leatherman Wingman holder
Behold the Eggman Easter Egg, the egg-citing creation that turns egg hunts into epic adventures. Why choose Eggman? Let me break it down for you: 1. Eggceptional Design: Eggman is not your run-of-the-mill bunny or chick. He’s a quirky,…
Meet the Flexi Magma Lizard! One of the creatures from my new Magma Series, inspired by molten lava and volcanic landscapes. For the cleanest results, especially when removing supports, I recommend using my provided print profile. If you…
50mm Version des tollen Aero Lenkerhalters für Sigma ROX GPS 11.0 von CBiker (https://www.thingiverse.com/thing:2612827). Die Verbreiterung war Notwendig wegen Umstieg auf 48mm Lenkerhalter. Zusätzlich wurde die Lenker-Fixierung leicht…
Enjoy this Sigma/ Troll Face keychain! You can use it to add a hint of personalisation to your belongings, pin it to your shirt as a badge, gift it to somebody, and many more! Please note: This is an AMS version if you would like to print…
I had problems positioning my Sigma Aura 60 light straight on my handlebars because of space problems. So I came up with the solution of hanging it under my Garmin Edge mount using a GoPro-Adapter. So I designed a holder for my lamp to…
Let this strongman help you open your tissue box, he’s here to assist you! Print settings : Nozzle: 0.4mm Layer height : 0.2mm with adaptavive layer height Infill : 5% grid Wall loops: 2 Supports: Tree (auto) Printed with : PLA You can…
Mimigma hat sich einen Kürbis übergestreift! dieses Modell hat mehrere Teile um es gegebenenfalls mit Lichtern auszurüsten. Leider habe ich kein MMU und musste es anmalen (ich gelobe Besserung). Verwendet beim Druck unbedingt Stützen! Ich…
This is a lens hood for the Sigma 170 to 500 telephoto lens. This is the second lens hood I designed for myself, and yes, I'm pretty hard on my cameras and equipment. Most of my glass is Nikon, and it is easy to get replacement parts for…
Bracket to attach the SIGMA bubble tail light to a GoPro Mount. The advantage of this holder is that the SIGMA Blaze does not need to be modified. The original side "wings" which serve as rubber holders of the original attachment, do not…
Changelog: 2023-03-16: Added new version for handlebar diameter 25.4 mm, as requested (offset 21 and 22 mm). Changelog: 2020-11-24: Added new version with 5.0 mm offset, as requested. And changed file names according to screenshot…