ASRock H170M-ITX/DL panel shield for UNYKAch UK1029
ASRock H170M-ITX/DL panel shield to be mounted in a rack case UNYKAch UK1029
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
31 modeli
ASRock H170M-ITX/DL panel shield to be mounted in a rack case UNYKAch UK1029
A vertical wallmount for the LEGO Rescue helicopter Set 42145 I printed mine in ASA 0.2 Layerheight 3 perimeters 0.4 nozzle 20% infill grid. Prusament ASA Orange. Also printed a test in PETG, which most likely would've been enough Wall…
I made this model in order to keep using my old case, the Thermaltake Versa H17, but with my new processor that produced much more heat (i5-12500). However, the stock H17 is not a very good case in terms of airflow, and there are…
Just a simple case with a snap-in lid. I also added the blend-file if you want to modify it for your use case.
I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the measurements were pretty low. There is plenity of space for the cables, so you should be able…
This is my first attemp for a sensor case, which reads temperature, humidity and lux. It uses a d1mini flashed with Tasmota and a DHT22 and BH1750 (GY-302) as sensors. The data is published via MQTT to my HomeAssistant instance. This is a…
Surprisingly, I couldn't find a case that would work for me so I had to design one. My board is AZ Delivery but it probably should fit others if not you can play with parameters in Fusion 360. The sensor can be screwed with m3 bolt.
Original project: https://www.printables.com/es/model/189821-d1mini-sensor-case-dht22-bh1750 I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the…
The include .3mf file fits an Adafruit BH1750 (light sensor board) snugly and has holes for the pin wires. This design doesn't have the STEMMA QT/Qwiic connection accessible, as my current project cannot use it, but allows for soldering…
Base verticale pour boitier PC Deepcool CH170 ou CH160. Ce model permet une meilleure ventilation, ici il y a des prises d'air sur chaque face, vous pouvez également ajouter un filtre à poussière (ou a objets si vous avez des enfants) que…
I was missing the I/O-shield of a MSI H170M PRO-VDH mainboard. So the easiest way is to create my own. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.28 Infill: 25% Filament: OWL Filament…
Print model I/O shield for ASUS H170M-PLUS. Print Settings: -Printed in PETG -0.15mm QUALITY -External perimeters first -No Supports
A case for an ambient light sensor using a Seeed XIAO RP2040 microcontroller and a generic BH1750 light sensor. The case has a sleek cubic design and is modular. The microcontroller mount for the XIAO is easy to replace and remodel, in…
I/O Shield For Gigabyte GA-H170N-WIFI motherboard
Halter für GY-302 BH170 Licht Sensor Helligkeitsensor (kompatibel mit Arduino und Pi) Passend für C-FUNN 6 Stücke 300* 6Mm Transparent Acryl Rundstab Solid Rod (…
IO shield edited from USB C to USB A
I liked the Wemos D1 Mini Case from FoxPrint3D because it's open for Dupont Connectors. When I built a light sensor with a BH1750 I figured where to put the sensor, and the best place for me was right on top the case. Unfortunately it now…
For use with nema 14 round LDO-36STH17-1004AHG with a 25mm fan Print Settings Rafts: No Supports: No Resolution: .2 Infill: 100 Filament: amazon ABS Black Category: 3D Printer Accessories
Halter für GY-302 BH170 Licht Sensor Helligkeitsensor (kompatibel mit Arduino und Pi) Passend für C-FUNN 6 Stücke 300* 6Mm Transparent Acryl Rundstab Solid Rod (…
Busch Mueller Button Case for Canyon H17 This mount allows the light control button to be attached to the Canyon H17. The screw holes are designed to fit the included screws. There's also a bit of space so that insulating tape can be…
Halter für GY-302 BH170 Licht Sensor Helligkeitsensor /Light Sensor Brightness Sensor (kompatibel mit Arduino und Pi) Passend für C-FUNN 6 Stücke 300* 6Mm Transparent Acryl Rundstab Solid Rod (…
Fits the gap between my UV-5R and my SRH177A using a barrel adapter.
PERSONAL USE ONLY Velleman WSAH171 protective case. You need to print the push button 4 times. The ticker side of it needs to stay inside the case, that is the part that presses the button. Needs support on the battery spot
This is a small case for the light sensor BH1750 which can be plugged into the Flipper Zero's GPIO pins. The BH1750 can be wedged into the slot and then wired to a tree and a two pin Dupont Connector which fit into the cutouts on the…
The perfect BH1750 sensor housing for use with Flipper Zero. Perfectly transmits light and allows for accurate data. Small and compact. You can make this module yourself I printed this model with a layer thickness of 0.12. PETG
This is a JVC IF-C01COMG card cover for DT-V1710CG, DT-V1910CG, TM-H1950CG and TM-H1750CG, probably would work on the 15" series too. Is compatible only with aftermarket cards built using the IF-C01COMG Clone board THT Full size designed…
Simple IO shield for the Asus H170-Plus D3 motherboard Good if you've lost yours or bought it second-hand without it (like me!) Recommended to print in PETG, ABS, ASA etc (PLA will work temporarily but might warp because IO plates are…
Halter für GY-302 BH170 Licht Sensor Helligkeitsensor (kompatibel mit Arduino und Pi) Passend für C-FUNN 6 Stücke 300* 6Mm Transparent Acryl Rundstab Solid Rod (…
This is a small case for the light sensor BH1750 which can be plugged into the Flipper Zero's GPIO pins. The BH1750 can be wedged into the slot and then wired to a tree and a two pin Dupont Connector which fit into the cutouts on the…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…