Wyniki wyszukiwania: hasbro

Sortowanie

29 modeli

P
PrintablesShwalamazula

Hasbro Spengler Neutrona Wand End Cap

UPDATE - 22 November 2020 Added a set of new caps for Aux Jack mods. There is a flat cap with Aux Jack. Additionally, there are caps with the 3/4" stub with just the jack, the jack + 2 circuit holes, and the jack + 4 circuit holes. There…

Pobrania
172
Polubienia
15
Ocena
0
P
PrintablesAJ Quick

Ghostbusters Power Cell Interior Panel Hasbro Proton Pack

This is a replacement interior panel for the Ghostbusters Haslab Proton Pack. This panel includes a cut out for a Talentcell 3000mah Battery Pack: https://amzn.to/3HDwbBf Uses a USB cable mod from GBFans.com:…

Pobrania
555
Polubienia
24
Ocena
0
P
PrintablesButterkeks

Hasbro-Connect4-Slider-Replacement

This Project was made for a friend, and there the sizes seams to fit well. So here the disclaimer: I did not check the size for myself, please use the FreeCAD file if you need so! Here I give you an STL to repair a may broken slider from…

Pobrania
190
Polubienia
6
Ocena
5
P

Ghostbusters Spirit Halloween 80% Stock Wand AND Hasbro Spengler Wand V Hook Kit

This model is something I made based on a lack of an existing “perfect” solution. I wanted to convert the crappy peg-on Spirit Halloween 80% wand to a printed V hook that doesn't easily break and can be later converted to use for a Hasbro…

Pobrania
183
Polubienia
17
Ocena
5
P
Printableswilly.is.making

Tip Cover for Hasbro Neutrona Wand

This is a reversible wand tip modification for the Hasbro Neutrona Wand. Simply press the printed part over the existing tip. The fit is very snug, so it shouldn't fly off during normal use. I've tested it on both the Spengler wand and…

Pobrania
163
Polubienia
14
Ocena
0
P
PrintablesLa Rotta Pinzon

Double launcher connector for hasbro beyblade x proto launcher

This will work perfectly and exact on your hasbro proto starter launchers. Enjoy!

Pobrania
118
Polubienia
10
Ocena
5

Ghostbusters Hasbro 1984 Proton Pack Cyclotron Press In Rings

These are a friction fit, press in mod that requires no permanent modifications to your 1984 hasbro proton pack. They can be a tight fit, so use caution. These files were created using reference from…

Pobrania
107
Polubienia
9
Ocena
0
P
PrintablesJeremy

"Don't Break The Ice" Replacement Cube - Hasbro

This is a replacement ice cube for the Hasbro “Don't Break The Ice” game (non-vintage model). It is a relatively straightforward print. Printing Orientation You can print this either face down or face up. You can print it face-up with…

Pobrania
90
Polubienia
14
Ocena
0
P
PrintablesAlexander

Stand for Hasbro Kylo Ren Force Fx lightsaber

Stand for the Star Wars Black Series Kylo Ren Lightsaber Force FX by Hasbro A hole in the bottom has been added to prevent the lightsaber to swing back and forth Printed using pla with 15-20% infill, no supports needed Height: 265 mm…

Pobrania
84
Polubienia
11
Ocena
4
P
PrintablesManta Design

Hasbro Beyblade X Stadium Twist Locks

Need an easier way to take down your Beyblade stadium? These quick release locks have you covered! Simply insert and twist to lock in place. Features a raised and textured design for easy removal. Tested to fit the Hasbro stadium but may…

Pobrania
80
Polubienia
13
Ocena
0
P
PrintablesAndy D

FurReal Hasbro Friends - C1156EU4 - Kami -> Futter (Spielzeug Katzen Futter)

Meine Tochter hat leider das Futter von der Katze verloren und ich habe dies anhand eines Fotos nachmachen können. Für alle Eltern die keinen 3D Drucker haben, ihr könnt euch gerne melden, ich Drucke euch das dann ;-) ich kenne das…

Pobrania
70
Polubienia
2
Ocena
0
P
Printableswilly.is.making

Orange Hat Light for Hasbro '84 Neutrona Wand

The '84 version of the Hasbro Neutrona Wand does not have a painted hat light on the main body like the Spengler version does. This is a simple cover that fits very snug, so no glue is needed. Just print and press on. I printed mine with…

Pobrania
53
Polubienia
6
Ocena
0
P
PrintablesTheNewHobbyist

Hasbro Pulse Proton Wand Stand

While I liked the look of the stand that shipped with this prop, I found it pretty flimsy. I took measurements and copied of the parts I liked into a new Fusion 360 model. This print is much more stiff than the original stand and works…

Pobrania
53
Polubienia
4
Ocena
0
P
PrintablesCholoseg

Hasbro Tie Striker (Rogue one) wing replacement

//* Nerf dart carrier uploaded, sorry I forget it Recently I bought a Tie Striker in a flea market without a wing. My son was so excited with it that I did a spare wing for replace the missing one. There is two versions: Ala.stl is the…

Pobrania
43
Polubienia
3
Ocena
0
P
PrintablesIan Gendel

Hasbro Spengler Wand End Cap CNLINKO LP-16

This is a modification to the End Cap to allow you to use the CNLINKO LP-16 M16 Connector https://www.amazon.com/dp/B0816BMDKQ?ref_=cm_sw_r_apin_dp_Z64RTF47HAMNZWPDRRAZ I had another person make this for me based on the original design

Pobrania
40
Polubienia
4
Ocena
0
P
PrintablesBCCS

Beyblade X Hasbro Starter Launcher Grips (by Dufyfuf)

Set of grips for Hasbro starter launchers Easy to use and ready to install. You can choose from couple of different sizes . Find yours and get ready to fight! The starter launcher is supposed to easily click in. If you're having trouble…

Pobrania
37
Polubienia
7
Ocena
0
P

Anna & Elsa Castle stairs for Disney hasbro toy

This massive stairs was printed on my Anycubic Chiron with 0.6mm Nozzle, 2 Walls and 8% Infill, without any supports but 30mm brim! Filament Use was about 400g. On the highest point it is 416mm high. To print the right side of the stairs,…

Pobrania
37
Polubienia
13
Ocena
0
P
PrintablesTapRackBang

Hasbro Lightsaber Forge

Just a couple things I modeled up to replace parts on my boys toy lightsabers. No supports required for anything, just print them with the flat base on the bed. The blade takes a litte bit to get it worked loose, but after that it's…

Pobrania
24
Polubienia
3
Ocena
0
P
PrintablesDavid Adams

Hasbro Clone Helmet Targeting System

Hasbro Clone Helmet Targeting System functional

Pobrania
20
Polubienia
5
Ocena
0
P
PrintablesSiegerKleber

Game of Life Hasbro bracket

Card bracked for all banknotes and item cards

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesMachinimax

Hasbro Battle Droid Blaster Upgrade Kit

Hasbro's Battle Droid Blaster is one of the most accurate toy props they have ever released. That is not to say it doesn't have a few imperfections but this upgrade kit will help fix them! THIS IS NOT A FULL MODEL OF THE BLASTER. Just…

Pobrania
18
Polubienia
7
Ocena
0
P

Astromech R2D2 Hasbro 2002 Interactive inside structure for Pi 5

DE 🇩🇪 „Diese 3D‑Chassis‑Modelle zeigen das finale Innenleben eines modularen R2‑D2‑Projekts. Sie dienen als Referenz, um ein bestehendes Hasbro-2002‑R2‑D2‑Modell mechanisch und elektronisch zu tunen (Elektronik, Sound, Licht, Bewegung –…

Pobrania
12
Polubienia
1
Ocena
0
P
Printablesmeagerfindings

Hasbro Tonka Remote Control Steering Wheel

My first 3d model, so it could certainly be improved. The original steering wheel's spokes formed a “T” with the top third of the wheel not having an spokes in it. Changed this to be more of an “X” shape to allow my toddler to turn the…

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesKlinWer

Hasbro RoboRally insert

The insert consists of six segments, no support needed. Print settings: 0.20mm STRUCTUAL Filament: PETG 15% Grid infill Prusa Core One HF0.4 nozzle Segment time [h] filament [g] Segment_1_v3 07:20 170 Segment_2_v3 07:22 160 Segment_3_v3…

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesFurial

Monopoly Builder Hasbro - replacement house piece

Use supports with 2mm x/y distance from the model so it will be easy to remove them or refer to attached .3mf file. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other…

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesAbel Argueta

Hasbro Escape pod 2004 small turbines

Replacement part for the Hasbro Star wars Escape pod 2004 small turbines model.

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

Hasbro RoboRally insert

The insert consists of six segments, no support needed. Print settings: 0.20mm STRUCTUAL Filament: PETG 15% Grid infill Prusa Core One HF0.4 nozzle Segment time [h] filament [g] Segment_1_v3 07:20 170 Segment_2_v3 07:22 160 Segment_3_v3…

P
Printables

Monopoly Builder Hasbro - replacement house piece

Use supports with 2mm x/y distance from the model so it will be easy to remove them or refer to attached .3mf file. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other…

P
Printables

Astromech R2D2 Hasbro 2002 Interactive inside structure for Pi 5

DE 🇩🇪 „Diese 3D‑Chassis‑Modelle zeigen das finale Innenleben eines modularen R2‑D2‑Projekts. Sie dienen als Referenz, um ein bestehendes Hasbro-2002‑R2‑D2‑Modell mechanisch und elektronisch zu tunen (Elektronik, Sound, Licht, Bewegung –…