1573 modeli
Splicing tool 1,75mm +2,85mm - filament welding - filament connecting If you like it --> press like it :-) Use your last meters to create a tool, with which you will never have last meters again! Instead of last meters, you will have…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have been constantly getting lost when playing Gloomhaven so i decided to create a dashboard for players that would save some space on the table and help to organize your stuff. It lets you manage basicly everything you need during…
Wydruk około 7,17 €–8,76 € nettoWstępna wycena jednego wariantu
to print: Print in PLA 0,2 mm layer hight support on enjoy it1
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Here's a stab at creating the Ghost Falcons and the Twilight Archon for the Aesther Diviner class in Gloomhaven. To be honest, I don't have the faintest idea what a "twilight archon" is supposed to be or what it's supposed to look like…
Wydruk około 2,05 €–2,51 € nettoWstępna wycena jednego wariantu
Even though I've used the old version in the picture, the new version should work as well. I would heavily suggest printing it on it's side while using organic supports! You can download the pre-sliced gcode or 3mf to import your settings…
Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu
One-sided tokens to replace the double-sided tokens in game. Uses the Gloomhaven font (Pirata One Regular) and uppercase to make some characters easier to differentiate. These are designed to allow you to change filaments as you print to…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
This is a remix that uses the scad file provided but the original designer to make a template for every Frosthaven class. I added the Gcode for a .25 nozzle and noted the color I use for each character in the filename. note some…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Magnetic Initiative tracker for use with the sliders from my monster card boxes , all the creature trackers can be found there. You need to add a pause in the print to add the magnets in the holes of the Stand. 3x3 mm magnets in the stand…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Prints at a 45 degree angle in one piece with support to the bed only, or in two pieces that can be glued together. Separate and full STLs available, along with the gcode I used to print.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
This is a remix of Wolph42's Gloomhaven Full Storage available here: https://www.thingiverse.com/thing:3658149 You will need to print the “bottom” monster storage box from Wolph42, but use the Lids of this remix. His version had nice…
Wydruk około 1,56 €–1,90 € nettoWstępna wycena jednego wariantu
Just a shorter version of the original.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
I love the Gloomhaven organizer by TowerRex but it doesn't come with nearly enough dividers for all the cards. E.g., I like to put dividers between the monster ability cards to keep the monster types separate. Print instructions…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
Based on the Frosthaven initative tracker from Thingiverse by jojobao. I made my own version. Economical print with 6 slots (half of the original and slimmer); this way you only need one with tracker e.g. 4 monster types and 2 players;…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
Created a simple brush holder so it couldn't fall out or drip outside the bucket.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A spare part for the pump or what it was for, again I have no idea
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Absolutely love the idea by @LeonH for the monster trays and other card holders. I printed all in PLA (prusament galaxy black / eSun fire red / eSun white/Sunlu green (turquoise)) with 0.6 nozzle and 0.3mm layer height (text with 0.2mm).…
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
Intro A compact and practical bit holder designed to be small, strong, and easy to use . This V2 version adds an ergonomic, textured handle and an improved variable bit fitting that grips bits securely while keeping the tool…
Functional hook for razors, sponges or even keys. Easy to attach with double-sided tape. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. It means a lot, and us designers really appreciate it. Overlay tile replacement for the board…
[1/27/2026] – Update (v4) Increased top SMA pass-through diameter to allow full seating of the SMA nut (hex socket compatible) Added internal thread to the previously unthreaded corner through-hole [11/29/2025] – Update (v3) Widened SMA…
This Insert stores Frosthavens content in the original box without box lift and it is extremely optimized for fast setup. It is designed for the box with these dimensions: 16.14 x 11.81 x 9.84 inches or 41.0 x 30.0 x 25.0 cm The standard…
Premium versions of the models found here: landable and multi-color landable and Printables Store . This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 3 Tile Type: Difficult Print Settings Supports: No…
Multi-material/Multi-color version pictured above available on my Gumroad Store Yet Another Wooden Crate. This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 2 One version has a flat bottom for easier printing.…
Filament leftovers? No problem, print this MUST HAVE sign!
A new organizer with little waste of material that actual fits everything. I really like the ideas behind some organizers that I saw at Thingy, but they use very thick walls and big filling blocks that add time and material in excess. So…
Multi-color/Multi-material and Flat-Top/Landable Treasure Chests available on my Gumroads Store and Printables Store . Overlay tile replacements for the board game Gloomhaven or any 28mm table top gaming. Tile Count: 6 Gold, 6 Silver Pick…
Table with chairs version is available on my Gumroads Store and on my Printables Club . This is a overlay tile replacement for the board game Gloomhaven. Table only model available here. Tile Count: 3 Print instructions Supports: No…
After watching my XL print, i noticed a bad behavior that could only be solved by a new part. I really think this is a must have part. I get that prusa(as every other manufacturer) want to have as short as a part list as possible.But this…
This is the PERFECT Gloomhaven / Frosthaven / Jaws of the Lion standee! You can print this and rush to show it off to your wife, which will undoubtedly raise an eyebrow at your excitement, in complete disbelief at how great your next…
Landable 2 and 3 hex versions for sale on my Gumroad Store and Printables Store . Overlay tile replacement for the board game Gloomhaven. Finally, players and monsters can now land on every hex of these boulders. No more worrying about…
You can fly/land on me! Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Note: I made these a while ago and never published them. I didn't love the way the models looked when rendered in thingiverse. I finally printed…
This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Print instructions Supports: No Resolution: 0.10mm Infill: 15% Encouragement If you like what I'm doing or use this in your game consider buying me a coffee…
I remixed some playerdash boards for Gloomhaven found on thingiverse. For the supports I recommend to place custom a few lines and enable the bridge function in your slicers. (consult the pictures) Remixed from:…
Multi-material/Multi-color version pictured above available on my Gumroad Store Yet another Wooden Barrel, this one has rope! This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 3 One version has a flat bottom…
Rock terrain for Gloomhaven board game. Tile Count: 6x (1 hex) Boulder 4x (2 hex) Large Boulders 4x (3 hex) Huge Boulders If you like what I'm doing consider buying me a coffee: Buy me a coffee Print instructions Supports: No
Rock Column terrain tile replacement for Gloomhaven board game. You can flip this on both sides for variation. Tile Count: 6x (1 hex) Rock Column Print instructions Encouragement: If you like what I'm doing consider buying me a coffee:…
Prints easy without support. I recommend to print the wallmount and hook as oriented in the .stl with no infill and 4 to 5 perimeter, because that way you get the most stable print. The amount of books you can hold with this wallmount is…
2d image extruded and remeshed of a cat holding a knife with the text "i have Stability - the ability to stab" to be printed in 2 colors bambulab AMS version bambulab NO AMS with Preprogramed pause for manual filamet swap at layer 15…
!! You will find more for free / pay what you want in my ko-fi shop !! Ruined dungeon walls for the MagHex system for use in Gloomhaven and Frosthaven. Contains a 3x3 mm MagHex base. Prints well on .2 and even on .3 layer height.…
Meu primeiro modelo 3D projetado, fatiado e impresso. Existem algumas falhas no desenho, pois aproveitei um vetor que criei originalmente no CorelDraw, por tanto algumas arestas estão abertas, mas não afeta a qualidade final :) My first…
All I did was add holes in the bottom of Robagon 's and liquidlogic 's pillars for 6x3 magnets to use them in Xevin 's MagHex Gloomhaven Tile System (links below) but other magnetic systems will work too. It was an easy and fast edit on…
This is yet another bookcase overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Original non-commercial version here: https://www.thingiverse.com/thing:2758101 Print instructions Supports: No Resolution: 0.08mm Infill:…
Stalagmites tile overlay replacement for Gloomhaven board game. I was not having good luck printing other stalagmites when scaled to 28mm, so I made some that hopefully will work better. Tile Count: 6x (1 hex) Stalagmites Print…
I made a quick remix of Robagon's excellent bush model because I wanted to have more points in the top layer so that models could stand on it more easily. So, I used the same tricks that I used when making the JotL Destruction tokens to…
Finally some prints of my own (12-08-23) I finally received my Prusa Mk4! I have the ability to rapid prototype a lot faster and have uploaded a new design with many small changes. The overall look hasn't changed but I'm getting good…
This is my take on inserts for Gloomhaven: Jaws of the Lion Everything is stored in the box securely with the lid fully closing, but each tray can be taken out easily to decrease setup and take down time. The character decks are sleeved…
A box for Philips 7000 series 16 in 1 shaver (MG7736/15), that fits all pieces that come with the shaver. Features: Lid of the box stays upright when open - does not flop down to either side. This can be modified by removing the stops on…
Tile overlay replacement for the board game Gloomhaven. Tile Count: 6 (you can always use some extra) Yet another Bear trap! This was just for fun. Note: Never stick your hand in a live bear trap! Print instructions Supports: No…
Update May5 2022 Added the XP and HP pin (heart) stl files from DocKuro 's post just in case people cant find them. Also fixed errors in the Character Board stl and the gcode files. I use Duramic PLA+ Filaments and they print very well…
Fits the newer Ender 3 Pro without needing to reverse bed bolts! The case is 52mm tall, so you can double check the bolt under your bed won't rub into the case. The 3rd photo shows which bolt to watch out for. This is a remix of…
This is the Living Bones model that I've been working on for the board game, Gloomhaven. I'm still fine tuning the model, but I think that it's gotten to the point where it's printable and so I want to show off my hard work! Speaking of…
Flying monsters or summons can land on crystal version 2.0 and 2.5, available on my Gumroads Store and my Printables Club . Overlay tile replacement for the board game Gloomhaven. Tile Count: 2 Print Settings Supports: No Resolution:…
Complete Barrel Pack can be found on my Gumroad store or in my Printables Club . It includes a higher detailed version of my original barrel, now with corded rope, and some multi-barrel models. Less than 10 percent of people who download…
Warning: The following may contain game spoilers. Read at your own peril. If you want to print off the initiative tokens, Recommend printing off the monster labels twice so you don't have to keep removing them from the box. Update…
This is a Rubble overlay tile replacement for the boardgames Gloomhaven & Frosthaven. It has small flat section on top for easy monster landing and like my other models no supports needed. In-Game Info Tile Name: Rubble Gloomhaven Tile…
Você irá encontrar chaveiros de diversos times de futebol brasileiro .
Increased the length of the anti tipping brackets for better stability. This holds the attack deck for a gloomhaven monster, including the monster stat card. This is meant to be used together with thing 2810528 so that dice are no longer…
I HAVE A PLAN. IT’S A BAD PLAN, BUT IT’S A PLAN. 😂🔧 A motivational workshop sign for those moments when you confidently announce, “I’ve got an idea!” and everyone nearby immediately starts looking for the fire extinguisher. Perfect for…
Doors! I've been working on this for a while, trying to come up with something that would keep a door in place nicely but would also leave room for all the models to stand in the door once removed. Same door fits both bottoms. Print door…
These boxes can be used to store everything that comes in the character envelope for a class (and, if you use the biggest one, even the character mini). This is a remix of jgrg1's character boxes on thingiverse . I've made a few changes,…
Overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Print instructions Supports: No Resolution: 0.10mm Infill: 15% Encouragement If you like what I'm doing or use this in your game consider buying me a coffee or sending…
Overlay tile replacement for the board game Gloomhaven. Two files are mirrors of each other for the two different colored tiles. Tile Count: 4 (4 yellow, 4 gray if you want to get technical) Print instructions Print Settings Supports:No…
Alright, my friend's in need of a countdown for those pressing deadlines. Ended up with this. V1 Ring Counter VASE/SPIRAL MODE- Size of ring: 21mm Printed on Ender 3 v2 Cura settings: quality-low .28mm bed temp-0 (use EVA glue), else 60…
Overlay tile replacement for Gloomhaven board game. Tile Count: 2 Different version of shelf non-remix so I could drop the non-commercial license. Got rid of the "cabbage" ;) Original non-commercial version here:…
I'm using this remix for the Hound (or Wolf) monster in Gloomhaven. I scaled it, made some slight sculpt modifications and posed it. Thanks to Agademer for making one of the cooler wolves on Thingiverse! Category: Toy & Game Accessories
Overlay tile for the board game Gloomhaven. The large version is more like a full size wardrobe. The small version is probably closer to the correct size. Since obstacles do not block line of sight in the game I assumed they where below…
Trays to hold your Frosthaven enemies Together, these two trays hold all the standees for the normal and elite monsters that come with Frosthaven (https://cephalofair.com/pages/frosthaven). Each group of monsters has its own niche which…
My wife and I are getting ready to start Jaws of the Lion, but I realized that the first scenario (and a few thereafter) has a cool set of palisades that I had no overlay for... so I made one! I quickly flipped through the scenario book…
The edges are beveled so it isn't harsh on your cards. It is designed to fit cards with or without card sleeves.
Overview The model is meant for storage and organization of Frosthaven's overlay tiles. The organizer replaces one of the stock inserts that come in the box. The value of the organizer is that each set of overlay tiles is displayed in its…
This is a charging stand for Philips 5000 series (specifically S5582/20) electric shavers. The design uses a sleeve to clamp the cable. Please check that your charger plug is the same as that shown in the image. If it is different, then…
Resolution: 0.1 mm (cca 46 min) or 0.15 mm (cca 26 min)
This is a Nest with bones overlay tile replacement for the boardgames Gloomhaven & Frosthaven. It has a flat top for easy monster landing and like my other models no supports needed. In-Game Info Tile Name: Nest Gloomhaven Tile Count: 4…
Basic insert for Gloomhaven: Buttons & Bugs. Supports SleeveKings standard thickness sleeves I have thought for better token storage but nothing else that I could make work in the available space. There is about 2mm of lid lift (proof…
Thorns overlay tile replacement for Gloomhaven board game. This printed better than I thought it would but beware of stringing. Print instructions Supports: No Resolution: High
UK: Belt tension gauge so you are sure you have tensioned the belt perfectly... DK: Bælte Spændingsmåler så er man sikker på man har spændt Bæltet Perfekt op… Printer settings: Filament: PETG Layer: 0,15 Nozel: 0,40 Infill: 0,20 Support:…
Gloomhaven: Jaws of the Lion Dashboard
Stairs overlay tile for Gloomhaven board game. Rev1 has fewer stairs, Rev2 has more stairs and cracks, Rev3 has better brick definition and slightly larger scale. Tile Count: 4x (1 hex) Stairs Print instructions Supports: No Resolution:…
Here's a nice fast one! I remixed MZ4250's Assassin NPC into a Bandit Guard for use in Gloomhaven! I changed around the hood and cloak a bit, giving him more of a bandanna instead of a scarf, and put appropriate weapons in his hands. This…
Multi-material/Multi-color version pictured above available on my Gumroad Store Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Square and Spiral versions with corresponding broken versions as well if you like you…
This is a miniature for the Gloomhaven Giant Viper monster. This is a bit on the large side, but I wanted to make sure that the scale pattern came through successfully. It doesn't entirely fit on my bases, so I'm printing a batch right…
!! You will find more for free / pay what you want in my ko-fi shop !! Modular boat scenery for Frosthaven. Split into front and rear. Will eventually be expanded with more assets to combine with the MagHex system. SIDE and WALL pieces…
Frosthaven included AoE abilities with complicated shapes that can be difficult to line up by eye. So I made these simple overlays that cover all non-trivially-shaped AoE abilities amongst three of the starter classes up to level 9. The…
UPDATE: Added V2 with material removed for less filament use, raised wall height to keep from seeing the color of the last card, and put a slope in bottom of the vertical car holder to keep them tipped back. Inspired by Gloomhaven Battle…
Dieser Leuchtturm ist eines der Wahrzeichen von Bremerhaven. Er steht auf der Nordmole der Geesteeinfahrt. Gebaut wurde der Leuchtturm in den Jahren 1912-14 und steht seit 2001 unter Denkmalschutz. Am Abend des 17. August 2022 brach das…
Updated and improved Single Color and Multimaterial/Multicolor version available on my Gumroad Store and my Printables Club . Flying monsters or summons can land on top of the water. Overlay tile replacement for the board game Gloomhaven.…
A simple shaver holder for your shower. Man and Woman edition :-) This holder is make for 6mm shower glass. The woman edition is made for a Gillette Venus - for the Man is made for Gillette Mach 3 but many more shaver's will be fit. I…
Simple and minimalistic shave distance guard for Philips Oneblade razors. Parameterized Fusion, so you can easily customize. Included are 2 and 6mm.
English. Are you tired of Gloomhaven's damage tokens creating chaos on your table? Solution to save and manage damage tokens easily. Español. ¿Harto de que las fichas de daño de Gloomhaven queden esparcidas y desordenadas por toda la…
Following along the path I started with the wood panel tiles , these are "flat" walls based off components from Devon Jones , in particular the bits from his ruined walls . Thanks so much Devon for providing all these bits! I'm modeling…
I didnt like the bush models available so i decided to fix something myself. Really loved the tree model and used the tree canopy as my model for the bush. Printed with 0.4mm nozzle at 0.1mm layer height. Category: Games
I remixed another of MZ's NPCs, this time to be the Gloomhaven City Guard. I did significantly less to this model than I did to the archer and so am a little hesitant to even bother posting it, but I decided to do so in case anyone wants…
Simply modeled at Tinkercad
These boxes can be used to store the components for Frosthaven classes. This page contains the character-specific files meant to be used with the base box here . For each box you will need to print 3 models: one of the…
After my first play through of this game I realized it was going to be a nightmare to pack everything away neatly in the same box. The insert I designed takes up about ⅔ of the box space. The original organizer has two small card storage…
This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Print instructions Supports: No Resolution: 0.15mm w/ 0.25mm Nozzle Infill: 10%-80% Notes: I put more infill in the spikes so hopefully they survive minis…
Here's my take on the Frosthaven summon (from the starting class, the Boneshaper), the Shambling Skeleton! I did my best to make this guy as printer-friendly as possible, but as you can see, it still needs some supports. That said, it's…
A completely original ‘3D’ board game! Parts to Print (print at 200um linear advance for better results) Body trunk x 1 (brim required) Ring OR Ring V2 with Grip x 4 Pawn 3 Pcs x 4 of different colors (support required) Tiles 12 Pcs x 4…
Flying monsters can land on me! More gas traps, ha!!!! Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Print instructions Supports: No Resolution: 0.01mm Infill: 15% Encouragement If you like what I'm doing consider…
![[REMIX] Stone Pillars for Gloomhaven with 6x3 magnet Holes for Maghex](https://media.printables.com/media/prints/191252/images/1793058_b3977f03-5ded-4370-ab38-6b3fc28d5ee3/img_2250.jpg)
