Liczymy pasujące modele…
A simple but characteristinc design for a modern headphone or headset stand. Great to display or rest your device on your desk. Best to print in - no special settings required, standard print settings are just fine Happy printing!
Wydruk około 3,49 €–4,27 € nettoWstępna wycena jednego wariantu
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Since this stand is pretty big I split it into two pieces which can be printed together on one plate on the Prusa i3 MK3S. The print does not need any supports when printed as setup in the “Headphone Stand Split Complete.3mf” file or if…
Wydruk około 6,75 €–8,25 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Wydruk około 18,09 €–22,11 € nettoWstępna wycena jednego wariantu
Once upon a time, I printed this: Cat Ears for Headphones by usernamexx - Thingiverse Today it broke :( So I designed my own to improve upon the design. What makes these better in my opinion is that it prints in a single part and is hence…
Wydruk około 4,41 €–5,39 € nettoWstępna wycena jednego wariantu
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu
UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…
Wydruk około 4,39 €–5,37 € nettoWstępna wycena jednego wariantu
Check the hight of your headphone before printing this! You want your stand be some cm higher then your headphones. Feel free to give me a tip if you like it! :)
Wydruk około 31,20 €–38,13 € nettoWstępna wycena jednego wariantu
Want to have a cool place to put your headphone? Print yourself this nice retro item! All parts are seperated so you won't need a MMU, just print them in your desired colors. Assembly is pretty straight forward, just put all pieces…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Remix of this model https://www.thingiverse.com/thing:4694896 to store two controls and a headset
Wydruk około 5,48 €–6,70 € nettoWstępna wycena jednego wariantu
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
A headphone hook designed to be glued under a desk or under a shelf using double-sided tape. Print instructions The "shelf" part of the hook is ca. 50 mm deep, scale the model accordingly if your headphones have bigger bridge than that.…
Wydruk około 6,23 €–7,61 € nettoWstępna wycena jednego wariantu
This is my original design for Miniature Over-Ear Headphones , specifically scaled to be the perfect accessory for collectible figures like Labubu, Pop Mart, and other 1/12-scale art toys . The unique print-in-place construction means no…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Shure sm57/58 Microphone Desk Clamp Stand + Headphone holder. Don't forget to print the screw that is a separate file.
Wydruk około 7,44 €–9,10 € nettoWstępna wycena jednego wariantu
A headphone hook for 1.5" (38.1 mm) drum rack tubing (common size of Roland e-drum racks). You can choose between two designs ("Headphones" labeI in writing or a simple icon). It clamps onto the tubing using two M6 bolts. UPDATE: Added…
Wydruk około 5,22 €–6,38 € nettoWstępna wycena jednego wariantu
Did you ever find yourself debating whether to buy headphones with proper noise cancelling or headphones with good cat ears support? No need to choose anymore! Now you can have state of the art noise cancelling AND superb cat ears! With…
Wydruk około 2,45 €–3,00 € nettoWstępna wycena jednego wariantu
I saw the head with headphones by Master Gadget and liked the idea, but didn't want to print them attached to the head. My daughter wanted a cat head and so I decided to create some that could be attached to any head. Enjoy! Printing: I…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Uchwyt wydrukowałem z matowego materiału PLA. W stojącym uchwycie można włożyć telefon w podstawie a na wsporniku powiesić słuchawki Uchwyt jest idealnie spasowany co oznacza ze nie konieczności klejenia lub skręcania. I printed the…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
Hello, I designed simple heaphones holder. There are 2 versions. First (screw version) is for every desk and you can screw it with simple screw. Second version (Ikea Bekant version) is for Ikea Bekant desk,…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
This is a simple design I made in Fusion 360 for my new Tin Audio T2 headphones. With the addition of a simple Velcro wrap, it holds them secure and the cord doesn't tangle! Print instructions I printed it in PLA at 0.2mm layer heights,…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Hanger for headphones can be attached to the table side with screws. Available as FreeCad v0.18 file. Print instructions Nothing special. The lower the weight of the headphones, the less infill required. I used 50% infill PLA for my…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
A simple, easy-to-print desk-mounted snap hook. The original design is built for a 3cm desk, but you can change this directly in the slicer. The simple design snaps right onto the desk and has an option for padding if you are worried…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
These Bear Ears attach to the headband of almost any pair of headphones. They only need lengths of 20mm Velcro (2 sided hook and loop that attaches to itself, commonly used for cable management) and attached around the band. They come…
Wydruk około 3,07 €–3,75 € nettoWstępna wycena jednego wariantu
My ear cushion from my Marshall Major III was very used. So I make an adapter for use a ear cushion from a Marshall Monitor II that I had. It's printed with my prusa MK3S+ in 0.2 mm and with organics supports everywhere. I have recycled…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
Headphone holder for your honeycomb storage wall. If you want to check the honeycomb storage wall then go to: https://www.printables.com/model/152592-honeycomb-storage-wall If you like my model, please be so kind as to upload your own and…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
Imported from Thingiverse: https://www.thingiverse.com/thing:4299784 This is a cable organizer and a headphone holder all in one. It splits in two to allow for wrapping a longer cable or hanging two objects. This thing is designed to be…
Wydruk około 3,46 €–4,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in two parts First attach main part to wall, then insert second part into holes ====================================================================== Hello, I have updated this model. Instead of two holes a third was added for…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
A simple and clean hook for hanging up your headphones. Attaches to your desk with a small wood screw and can be printed in under an hour (42min). The hook is designed to provide extra support so that it cannot bend. Simple solution for a…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the excellent model by JYC_RS. I printed this a while ago but was never happy with the overall stability. So I added some weight pockets to the base. The new version is visually identical, while the total mass increased…
Wydruk około 10,21 €–12,48 € nettoWstępna wycena jednego wariantu
Print out of something strong like PETG, ABS etc. Doesnt need to be perfect so .20-.25-.30 layer heights would all work, but the smaller the stronger… I printed with 100% infill and support on the upper pin.
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended print settings: Material: PLA/PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
Needed a proper angled mount to store and display my headphones. I meassured out the angle of my ceiling (see picture) and designed a sturdy 3 part ceiling mount. There are spacers in the back, for my wall/ceiling I designed the spacer to…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Headphone Stand by MakerBot - Thingiverse
A remix of mistertech's headphone holder with a reversed cord holder. Works on desks up to 40mm thick.
lumo · headphone stand modern minimalist headphone stand assembly important · make sure that: your filament is dry so that it deals appropriately with the tolerances your build plate is properly clean so that there aren't adhesions issues…
Inspired by nature's powerful rhythms and ever-changing dynamic beauty, this headphone stand is my abstract interpretation of the power of "waves" and "Onami". The form draws from the sweeping power curves of crashing waves, translated…
headphone stand · reDesk modern minimalist headphone stand with grid patterns the base screws into the threaded stand, the tolerances are tight, so be mindful and patient and you'll be able to tighten it right into position , and will…
Check out this Spider-Man headphone stand! 🕸 It's the perfect way to keep your desk organized and show off your favorite superhero. I'd appreciate a Like if you enjoy my work! Don't forget to visit my profile for many more cool 3D prints…
Headphone holder for M4 countersunk screws Model without holes https://www.prusaprinters.org/prints/16725-headphone-holder Bigger version https://www.prusaprinters.org/de/prints/43493-headphone-holder-big
A headphone holder with a screw for tightening it to the desk. There is a version with and without a hook. The main purpose was a place to store a seperate microphone and help with cables. Hooked version needs supports on buildplate.…
Two minimalistic headphone stand designs. Both designs come in two variants, one for smaller printers where the base is detached and a full one.
Soporte para auriculares ajustable en altura No requiere ningún tornillo para su montaje, es todo impreso en 3D. Archivos 3mf incluidos, preparados en Prusaslicer y Bambustudio. La placa es personalizable. En los archivos encontrarás una…
headphone holder / headphone stand Printable without support
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Universal headphone holder for use with IKEA Skadis pegboard. 4 hooks for maximum…
This unique Batman headphones stand is a perfect accessory for fans of the Dark Knight. The Batman inspired design makes the stand not only practical but also a stylish addition to any desk. It keeps your headphones safe, organized, and…
UPDATE 28JAN2018: I have added a "WIDE" version that can accommodate headphone headbands up to 55mm wide. The original model accommodates headphone headbands to 45mm wide. UPDATE: The "Long" version of the screw could grip on to a 1mm…
headphone & headset holder / stand The bottom is hollow, if you want to put something heavy in there like sand.
This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense Strong and practical under-desk headphone hanger Zip tie your headphone cable to the hanger for…
New Sizes!! Hang your "cans" (do people call headphones cans anymore?) on your SKÅDIS pegboard (Article Number: 903.471.72, etc). 2 new variants added with headband width in the filename: 28 mm headband 48 mm headband (the original was…
Harry Potter Headphone Stand Would make a great gift Easy to print, slots together. Use supports for the top Stands just over 20cm tall UPDATE: I have updated the top file to a thickened version that is easier to slice. The original…
Intro I have originally setup a Bambu Studio project file that has everything laid out, however, if you're not using Bambu Studio or it's printers, please refer to this image for layout, printing orientation, number of parts needed, etc.…
Modernly designed holder for headphones with clear, minimalist shapes. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL +…
This one-of-a-kind Deadpool headphones stand is the ultimate accessory for fans of the Merc with a Mouth. Taking the form of Deadpool's iconic mask, this stand is rendered in a sleek, all-black design that makes it a sophisticated and…
needed a quick solution to get headphones off of monitors. BOOM! move it slightly to the right. (or left if you mirror it :) My headphones have a 30mm headband, so that's what this one is made for. [find enclosed the f3d file for…
Headphone holder With screw holes https://www.prusaprinters.org/prints/15235-headphone-holder
Can be printed in any material on a printer with sufficently tight tolerances without supports. The screw needs some inital force to start turning well. If your printer tolerances are too loose, consider scaling the screw slightly.
Simple under-desk headphone holder. Uses minimal material and is easy to attach with screws. Fits up to 30mm wide headbands. Print instructions: 3 perimeters Detect thin walls
Inspired by the elegant lines of Gothic architecture, the Gothic Throne Headphone Stand showcases your headphones in style while keeping them secure. The sturdy base prevents tipping, and the curved top preserves headphone cushions.…
Modern designed headphone holder with decentered arm. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for…
I created this model to solve an issue I frequently found in many existing headphone stand models. Other models I saw all included the hook below the actual clamping mechanism which did not really work for me due to obstructions in my…
Headphones hanger, you adjust size of it by bolt, sometimes thread is not fitting so you need to use sandpaper and maybe some grease. You can change dimensions in freecad.
Jedná se o remix stávajícího držáku z Thingverse. Upravena šírka plochy pro třmen sluchátek, délka šroubu a jeho závit. Pro lepší fixaci ke stolu je možné na dosedací plochu přilepit tenkou gumu. Pro tisk bez podpor je nutné držák…
Simple headphone stand Suggested print settings Add a modifier to print the base plate at 80% infill to increase the weight and stability of the stand.
Call of Duty Headphone Stand, slots together. Makes a great gift Print the top with supports touching buildplate @3DPrintBunny
Update: 2/8/2023 : Added a variant with an even stronger total load capacity by addressing the weakest bend in the first model, but you can't push it quite as far into a desk because of the curve. See “Variants” for which one to print.…
Wasn't too impressed with the selection of headphone clamp holders here on Thingiverse, so decided to make my own version. This design uses a moveable clamp protector located at the end of the tightening bolt so that when you do tighten…
Use a toothpick to attach the top crystal Make sure to add proper supports for the bow tie or use the included 3mf file Differences from the remixed model: Better looking top sim crystal, actually symmetric Fixed geometry in some places…
Combo headphone hook holder and a single SD card holder. I've originally made the hook for my Koss Porta Pros, which have a very narrow headband. Due to popular demand, I've also added a version for wider headbands. And there's also the…
Here is a statue headphone stand that was inspired by the classic marble sculptures of the renaissance. When I had the idea for this I couldn't find anything online that was similar, so I made it myself. This probably wouldn't be a good…
Now your headphones won't take up space on your desk. There's a couple of similar designs out there, but I haven't found any that would be nicely curved on the top and front, so I designed my own. There's a bit of angle so it clamps…
Wall mount/stand for an Xbox (or similar) controller, and headset. Holes are sized for #8 wood screws (which I believe should be equivalent to 4mm wood screws if you don't use freedom units). Intended to be printed on its side, but people…
So, COVID_19 has you stuck at home, binge watching Game of Thrones (again), and you need another beer (not Corona, that wouldn't be cool) so you go to put down the headphones that your wife makes you wear because she's sick of your choice…
With the screw you can adjust any desktop width up to 4 centimeters ! 3D PRINTING SETTINGS Nozzle : 0.4 (0.6 to increase print speed) Layer height : 0,28 mm min No supports needed Wall line count : 3 (it's important for the stand…
easy to print without support For every headphone
I needed to mount headphones to the underside of my desk, so I remixed my old headphone hanger design to accommodate this new mounting requirement. This model also contains infill modifiers around the screw/bolt holes to create a solid…
Made this for my sis to hang her headphones. A lot of hangers are great and waste less filament, but I wanted to make her something special. Holds my big MDR-Z7s no problem, you could scale down if you have smaller cans. You can fix it to…
****** Make sure to check out the entire clamp and rail system lineup!!****** https://www.thingiverse.com/hardline23/collections/clamp-on-rail-system Welcome to my SECOND released project for Thingiverse! I normally do more industrial…
A desktop headphone stand. Designed to fit Sony WH-1000XM4 headphones. This model just barely fits onto the print bed of a Prusa i3 MK3. Lay the model on it's back and rotate the it 45° around the Z-axis and hit the arrange button…
Headphone holder for table No screws, no support Print settings: 8 walls 0.2mm layer 30% infill no supports Use PETG
Moai Head Keychain – Decorative Easter Island Keyring I designed and printed this Moai head-shaped headphone stand for personal use. It serves as both a stylish decorative piece and a practical stand to hold your headphones securely.…
A hanger designed specifically for the Bose qc35 ii (it will probably work for others as well)
Headphone Stand/Holder 5000 (Attachable to Table) Enhance your workspace with our 3D-printed headphone stand, designed to securely hold your headphones while keeping your desk organized. This stand is both stylish and functional,…
Headphone holder_dzino, Headphone holder_dzino2025
This is a Star Trek headphones stand. Great as a gift. Prints in two part and slots together, glue for stability. @3DPrintBunny
If you ever feel like you could use an extra hand to hold things for you, then you have found what you've been looking for! This sculpted hand looks extremely cool. You could mount it on the wall of a living room to hold items to display,…
Not much to it. It clamps onto your desk or table up to 36mm thick. Took inspiration from multiple other designs. I like the “S” shaped hangars since I won't bump into it but I hadn't seen any that have a locking screw like others so…
Modern Headphone stand to hold and display your headphone in a stylish and modern way. Easy print that fits on 256mm beds. the stand is 250 mm tall, 80 mm wide and depth of 70mm. If you want to support future models you can join a patreon…
ALL GAMER MUST HAVE UPGRADE!!!! A Hight quality dragon on FOR BIG adjust size 24 cm Hight !!! You can mode it to lamp !!! Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire
Keep your desk clutter-free and your headset always within reach with the Headset Desk Mount . This compact hanger is mounted with 2 screws under your desk, providing a secure spot to hang your headset. With its minimalistic design, it…
This is a simple wall mount for a PS5 official controller and headphones. Just print everything out of PETG (I used Prusament PETG) and glue it together with superglue. To fix it on a wall, use Mamut Glue or similar one-component glue.…
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
This is a one screw headphone wall mount for Hyper X Cloud II also possible to use it as lanyard holder
A simple IKEA Skadis headphone holder, which is made for wider headsets. The width of the holder is 5 cm. Print with supports. PLA, 20% infill
A simple headphone stand design with a slight curve on the front face to create a textured finish. Prints without supports. Mine is printed in Polymaker PolyTerra Dual Extrusion Matte PLA (Gradient Wood) which gives a nice wood…
Lord of the Rings Headphone Stand Would make a great gift Easy to print with no supports, slots together no need for glue. Stands just over 20cm tall @3DPrintBunny
A nice modern headphone, headset stand. Easy to print. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for…
This is a headphone stand with Goku in Ultrainstinct from Dragon Ball Super, it's a model that encourages truth and determination just like Goku. This headphone stand comes in 2 parts, the actual stand with the figure and then the…
PS5 Controller and Headset Wall Mount (or Single Controller) This wall mount provides a versatile solution for organizing your gaming space, allowing you to conveniently store one PS5 controller and a pair of headphones (or a single…
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
![Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger](https://media.printables.com/media/prints/664262/images/5232779_79e6456f-825b-420c-b549-25ccaeddc536_e9b42033-6509-4546-87ec-a2d2b3b002b1/dsc_3556.jpg)
