1284 modeli
Příchytka na čalounění - dočasně trvalé řešení zlomené příchytky. Tisknuto z PET-G a drží (z PLA praskla). Temporary (forever) solution. I printed it from PET-G and works fine (or ABS/ASA should be OK, from PLA it cracks - too fragile…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Remix of Comfortable Leatherman Wave belt holster by WaveSupportApparatus. Mostly the changes are of a cosmetic nature i.e. I've tarted it up a bit by rounding some of the hard edges. I've also engraved the words " Leatherman…
Wydruk około 3,17 €–3,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holster for Kel-Tec P17 Reupload from thingiverse.com by d94jonca Kel-Tec P17 mag carrier https://www.printables.com/pl/model/563952-kel-tec-p17-mag-carrier
Wydruk około 2,84 €–3,47 € nettoWstępna wycena jednego wariantu
prichytka calouneni dveri auta. ve sliceru je třeba nastavit “detekce tenkých stěn” aby se správně vytvořila první vrstva včetně křidýlek. Pokud potřebujete úchytku upravit, zde je zdroj https://www.tinkercad.com/things/ddFXnxxtSBB-autocudl
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A holster for heat gun or hairdryer that prevents the hot nozzle from touching the table or holster. Attaches ridgidly to table.
Wydruk około 3,14 €–3,84 € nettoWstępna wycena jednego wariantu
These are two holsters for the compact 16ml pepper-spray bottles of Walther . I needed a way to somehow attach it to a cord, to hang it in an easy to reach spot inside my car. I printed it vertically using Prusament PETG – the…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this to holster my Bosch Advanced Saw 18v140. The French Cleat version also holds 5 of the blades. It's designed with a chamfer in the bottom so it fits snugly! It might fit other similar jigsaws that have a roughly 70mm width.…
Wydruk około 5,23 €–6,39 € nettoWstępna wycena jednego wariantu
To attache the clips to the paddle you will need two M3x6mm bolts and two M3 nuts. The nuts drop into the slots. On the mini - print on the side with support under the clip.
Wydruk około 5,85 €–7,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I print from the STLs for either the dino bubbler (2pcs) or the costco bubbler (1pc) and then use Zip ties to secure. Dinosaur Bubbler Fusion Files https://a360.co/3Jgikki Costco Bubbler Fusion Files https://a360.co/3H77pZJ Snow Princess…
Wydruk około 9,48 €–11,59 € nettoWstępna wycena jednego wariantu
A few years ago, I bought a Hampton Bay Mena ceiling fan from home depot, and since then, the battery cover has gone missing, and I've often misplaced it because there was no dedicated space for it. I want to help YOU avoid that problem!…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Infill, 20% a new version https://www.printables.com/model/752394-dummy-13-katana-holster-v2 holster v1 and v2 require minimal support V3 requires no supports
NEW GEN UPLOADED This is a 3D printable fishing rod holster with customization built in! This holster is still in early stages but can hold an ultralight or medium rod well as long as you are wearing a decent belt. To all sweatpants…
Update 23. Dec. 2023: Problems in the Cura Slicer have been fixed Update 11.Nov.2023: Added additional parts and variant + Katana Based on DUMMY 13 Beta - Oct. 2023 Get your Dummy 13 here: /model/593185 I designed this part to create…
Fits a Zyn can, but I don't know what other tins it might fit, let me know if you want another size Zonnic Tin/can sizes added (5.2mm wider) - 12/18/23
Something I recently learned is that the belt clip is a bit weak, so I just made some changes 5/1/24 and will keep the old files up, but be warned they are not awesome. NEW files use an 8 mm diameter spring to close the lock. If using the…
A Simple & Extremely Useful, Fast Printing RGB LED Light Strip Remote Control ‘Holster’ Update: Now includes a second model for the larger/ longer remotes that seem to be pretty common measuring 125 x 58 x 8mm It features ‘vents' at the…
Is now tighter
I created a holster that fits a Glock 34 pistol that I use for all of my SWAT Dummies. I've included the pistol which has a red dot sight and a weapon light. *** UPDATE: I've included my entire drop holster collection here for you to…
Fully Parametric IKEA SKÅDIS (Skadis) Bin / Tray / Shelf Generator (w/Partition generation) ✨Updated to v2.1. Added generation of Baskets and Tool Holsters Need a custom-sized storage solution for your IKEA SKÅDIS pegboard? This…
Slim version remix of the original. Two versions - for the drill/driver and larger for the impact driver. Reduced overhangs. I printed mine upright in ABS, 20% infill, 3 walls, 0.2 layer height. My first model/remix. Used basic tools in…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Medium - Hard Tools Needed: Needle Files or Fingernail Files, Side Cutter, Deburring Tool, etc. Introduction & Instructions:…
V2.4 06 Dec 2023: Open frame version More beautiful Even slimmer Less bridging needed I prefer "inline" dual katana holsters, so I tried to design a modular version. Unfortunately it loses the X shape, but it doesn't hurt me much. I am…
If you need to buy the tracker: Seeed Studio SenseCAP Card Tracker T1000-E Make sure to use coupon code B737HUW8 for 10% off. Commercial Use and Attribution Notice: Alley Chat T1000 Holster © 2024 by Alley Cat and Majestic AV, LLC. is…
I love Dummy 13, so why not make some things to hold the things I love
UPDATE: I took out the lump because it wasn't really needed and gets in the way of most lanyards and some mods. Added a version that works with M2.5 nuts for the Baofeng clip. I based it on the style of the holsters for my Alley Chat HT…
a belt held holster for your glock 17
Remix of the Zyn Tactical Snus Holder from @JacksonSediv_1247627 Fits a Velo can, but I don't know what other tins it might fit. Tactical Swedish Snus Holster for Velo's. Can be attatched on a Tool Belt or Pants. Does require supports,…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** For Makita LXT 18V Tools only: This is a tool holster and organizer designed for…
A holster created to fit the Glock Fidget Keychain – 3D-Printed Mini Slide-Action Toy by Rectangle. Works both with and without my flashlight accessory I created for it but fits a little tighter with the flashlight installed. I've created…
This piece replaces the factory Barrel Plug of a Safariland 63xx Glock 17 Holster to make it fit 19 and 45 Models. Reccommended Settings: Heat Resistent Filament 10%+ Infill 5+ Perimeters 0.1mm Layer Height Print Orientation and Supports…
Holster for AEP CYMA Glock CM.030 Mount for Molle or 50mm belt Used material screw: - M4x14 DIN 7985 - M4x8 DIN 7985 - 2x NUT M4 DIN 934 - 2x M3x10 DIN 913 - spring from pen diameter 4mm I recomend to use ziptie to belt mount like on…
Introducing my meticulously designed 3D model holster crafted specifically for the Ruger Mark 4 22/45 Tactical with a 4.4" barrel . Precision-engineered, the holster is molded to perfectly fit the contours of the Ruger Mark 4 22/45…
This is a quick model I threw together after coming across Samonsite's HSW Deburring Tool Holder model for RostaP's HSW . I am a big fan of the radial symmetry and decreased footprint of his model relative to other options, but my deburr…
DC17 blasters and holsters based on the animated series and as used by characters like Captain Rex. These are sized at 1:12 scale for customising 6 inch figures, 1:6 scale for 12 inch figures and 1:1 scale for life size props and…
Looking to spice up your robot? Print this dual holster to attach to your easy 13 robot! just print the holster with supports and the swords and your done, I recommend sanding the swords a bit if they don't fit.
Holster for CZ P-10C, P-10 F, P-10 M Mount for Molle or 50mm belt Used material screw: - M4x14 DIN 7985 - M4x8 DIN 7985 - 2x NUT M4 DIN 934 - 2x M3x10 DIN 913 - spring from pen diameter 4mm I recomend to use ziptie to belt mount like on…
An improved version of the Fishing Rod Holster! -Improved Desgin -No Supports needed Just put it on a belt and enjoy hands-free fishing! print upside down mirror the model to have a left side holster Also check out the old version:…
This Adjustable Angle Gun Holster is specifically designed for the Taurus PT-111. With its unique adjustable angle feature, you have the freedom to choose a custom angle for mounting the gun to your hip. Whether you prefer to use it with…
I based it on the style of the holsters for my Alley Chat HT Pocket, and I think it goes really well with the H2T design. Baofeng Belt Clip Generic Belt Clip Heat Set Inserts This is a new work completely owned by myself, but I am…
I created this holster for fishing with waders, allowing hands-free activities without risking your rod in the water. Here are the printing instructions for the fishing rod holster: Print upside down for optimal stability. Use supports to…
Holster for the amazing Sinden lightgun. I wanted a holster that I could grip and wrap my finger around the trigger as I pull it out of the holster. This achieves that and it holds the gun firm and tidy. I still need to work out cable…
A friend of mine wanted a holster to screw into the bottom of his desk, but couldn't find one in the orientation he wanted. This holster clips around the trigger guard. This makes it easy to put in, but a little difficult to pull out. The…
Wear your beer on your belt. The base should print fine without supports. The clip may need bed supports. This was originally designed for and printed on a Lulzbot Mini. The fitting slots may be a bit loose and need glue if printed on a…
An easy way to store your various ToughBuilt holsters and belt attachments when not in use. I printed these in PLA and they work great!
I found a mag pouch holster thing I liked and redesigned it from scratch in Fusion 360. I wanted to be able to print it assembled so you would not need screws. I made two versions one clip on one belt-fed on Monday I'm getting my blue…
Hello, This is my Snus holster for everyone. It is completely self-drawn. I hope it brings you joy. Print Information: For Part 1, 2 and the Belt Clip you can use any Material you want. (At the picture its made out of PolyLigth PLA black)…
holster for the hdr 50 umarex revolver
To be clear, this is a remix of 3 different models mushed together to make One Thing. I really like Yacchi's Beyblade X Launcher Holder , but I found the belt clips to be a little too flimsy, and they snapped on me during use fairly…
Couldn't find anything as nice as I wanted so remixed some existing stuff on TinkerCAD. Fits the original pistols perfectly (maybe other stuff too who knows) and I believe it would fit most swords available too. Pictured is the Katana…
These are a remix of https://www.thingiverse.com/thing:3227074 I altered it to fit an uncle mikes duty belt. I narrowed the loop and shortened it a touch. Fits the belt much more snugly. The first one I did is the mid loop model. It sits…
I wanted a quick way to grab and put away my heat gun one handed, I had it hooked on the handle but that was too awkward while holding something else. Fusion 360 CAD file included, all measurements are parameterized, you can adjust for…
Use a 25mm M3 bolt and nut and an 8mm diameter spring.
This is a holster for the Ruger 22/45 Mark IV Lite pistol. It can accept a suppressor as that is how I carry mine. The hood is a little thinner than the original model, I tried to squeeze it and banged it around with no issues. I suggest…
The MMS Springfield Hellcat Platform Holster! Use in your car console, on your desk/table, on a nightstand, in your gunsafe, wherever you want! As per most of my designs, it is MMS Capable and as such is absolutely modular! Use any of the…
This 3D-printed katana holster is designed to perfectly complement your Dummy 13 figure, allowing the katana to be securely sheathed and easily accessible. The holster is scaled for a snug fit, ensuring that it attaches smoothly to your…
What is it ? This is an IPSC competition shooting belt adapter for affordable Cytac brand F-Speeder series of holsters. EDIT 11.4.2022: Added a Tri-Spacer that you can use instead of the regular holster spacers Different files Laser-cut…
This is inspired by Adam Savage's aluminum Leatherman holster, but I have a 3D printer, not a metal shop.
I remixed the popular Free P4 bit holder to hold the new Leatherman Arc and include a positive retention bit holder as well. The print is a bit bulky, but I've used it for a few months now and it was indispensable while remodeling my…
V1.0 28. Feb. 2024: Revised as an independent prop V1.0, 26. Jan. 2024: first released as part of “DUMMY 13 goes to COMIC CON - Deathstroke” This weapon was designed for my Deathstroke costume. You can print the blades in other colors, or…
Stanley Knife N°199 comes without any protection, so I made my own belt holster. I have done several iterations, but v5 works by far the best. Designed in Onshape:…
A simple homemade belt-loop holster for the Apple Vision Pro battery pack , to help save you $50 after spending $3500+. Note: see also my newer design (in “beta” pending final tweaks). It features a rotating clip and sleeker design. The…
Well, it's a holster for your side-burger and my contribution to world peace. Features: Quick-access finger hole Grease drip port Burger retention surface Multiple mounting options Load Specification: Designed for McDonald's…
modeling of a holster for robocop gun on armor thigh.
Assault Phaser Holster from Star Trek VI: The Undiscovered Country Holster for the Assault Phaser Sand the pieces. Align and glue holster1 and holster2. Sand again. Prime and paint. Repeat as necessary..... Glue the clamp between the…
Update: Updated the model and re-did the interface for the Amomax side. Slightly thickened the whole thing and generally made it a bit nicer. Printing Instructions No support needed in the nut hole on the bottom. For settings I would…
I wanted to create a dual purpose bottle opener and thought why not make a holster to hold that beer after opening it. Slide belt through the outmost slots and insert 2 pennies or similar sized coins. Designed for belts less than 45mm…
Crudely made but very functional. Should fit all currently available NACS to CCS adapters. Use it to hang your adapter out of the way in your frunk for safe keeping. Strong enough to easily support the all metal Lectron adapters. Not the…
took a riptide mainsail holster left hand iwb and converted it to right hand owb
Holster for this great multi-tool. A couple options depending on your needs and where it'll be mounted. I've added the V2 design for this after completely rebuilding in OnShape. Print instructions Print as is, using a brim if necessary.…
Tesla/NACS wall mounted holster. Remix of previous model to refine the look of the design. Link to onshape file:…
Less noticeable than an over the belt clip. Better support than a J-clip. Three lengths included. I like the shorter ones for subcompacts. Fits 1.5 inch belt. And after a few iterations and several months testing we have – Version 2! V2…
Holsters for Glock 17, both factory and 3D Printed FDMA designs. G17Holster_FDMA17_2.stl is the original design that was intended for use with the FDMA DD17.2 3D Printable Glock 17. This design went though several iterations and has been…
This is a really easy print with no need for any support material. The tolerance is .125mm, which I think it's perfect. It's loose enough to easily insert and remove the remote, but tight enough that there is essentially no play when…
Slingshot ammo clip that holds and dispenses 12x 3/8" (9.5mm) steel balls. There are two holsters, one that the clip faces to the front and one that faces to the side. You will need one 5/16" (8mm) diameter 1.8mm thick rare earth…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Medium Tools Needed: Needle Files or Fingernail Files, Side Cutter, Deburring Tool, etc. Introduction & Instructions: QuickClip is a…
Źródło oznaczyło ten model jako treść 18+.
An easy way to mount your Bose Radio in the cockpit.
Holster designed for the Mark IV 22/45 Lite. It should work with all the Mark IV's. I do not have them to test. For clip strength, I suggest printing it on its side with supports for the belt clip. That way you have the strongest belt…
Holster claws help with IWB printing, so I designed one for my Talon Retention G19 Covert series holster. That being said, they should fit other two-hole holsters. I uploaded STEP files so you can easily modify them in your CAD program of…
Print it standing on the bottom with auto tree supports
Remixed from Sergeevio's Springfield holster claw A holster claw accessory designed to fit any of the right-handed Tulster Glock IWB holsters. This holster claw fits snugly in the corner between the trigger guard and the frame, so that it…
Ruger LCP magazine holster with belt mount.
I really liked my ssx23 holster, so I got a similar holster for my Glock, and I made it the same principle From what I've tested, it fits, WE Glock 17, WE Glock 18, WE Glock 19 There are 3 included files. Holster Trigger Piece Holster…
A holster for the Venom Pro. Molle compatible - use the Molle tabs from your favorite model. I use the ones from BlitzShorta . Or if you don't have a Molle belt, use this Molle Belt adapter. Now includes Left & Right handed versions, and…
I designed this to allow my kids to clip their Yoto Minis to their bed rails. It's recommended to use tree supports, and there's an included support pin in the design. Since everyone is going to require a clip unique to their…
I'm printing these in PETG with 15% infill. But really all settings are at your discretion as long as the durability will suit your own purposes. I recommend ‘molle V2,’ especially for straps as the cuts are center on the molle clips…
This is another holster for the Sinden Lightgun. I love these lightguns, but for me, it's something that is used only on occasion. The majority of the time, the (very) long USB cords are just flopping around, begging to be tripped over or…
🤠 Dummy 13 Wild West Pack Saddle up and bring your Dummy 13 into the Wild West! This accessory pack transforms your Dummy 13 into a classic cowboy, sheriff, outlaw, or gunslinger with a collection of western-themed accessories designed to…
This C.A.T Retainer was designed for compatibility with the Gen. 7 C.A.T Tourniquet. Whether I'm in the outdoors, at the range, or on the shop floor, I want my everyday carry of necessary equipment to be easily accessible. This retainer…
Gun holster for arcade cabinets. Use customizer to set the board thickness of your cabinet so the holster fits snugly. Mirror file for other side of arcade.
This is a printable replica of the holsters that held the “Boomerang” Phasers in DS9, VOY, and the TNG films. It should snugly fit most phasers, but some modification might be required. I experimented with a printable Kydex pattern, the…
I really liked InverseSandwich's design, but I changed it to suit me more moved the belt loop higher, so that the top of the Wingman wont dig into me when I sit down made the bottom slot go higher to make popping the Wingman out easier…
Loosely inspired by Adam Savages Youtube video about making a belt holster from aluminium, I created this holster for my Leatherman Charge TTi. Belt size: up to 40mm wide and 3mm thick, but feel free to contact me if you would like a…
These clamps are made to fit UnimatrixRed's holster for his awesome Boomerang phaser. You can download the holster and phaser here: https://www.printables.com/de/model/404112-star-trek-boomerang-phaser The “front” (larger) clip will have…
This is a pretty ordinary wedge-shaped door stopper with a holster designed to tuck it into when not in use. Command strips are a great way to affix the holster to a surface (I liked putting mine on the backside of my door), since the…
A quick remix of Printit Tom's Riptide Mainsail Glock Holster to include a belt loop for 1.5" belts. The added thickness also adds a thumb rail for easier removal of the pistol. I primarily intended to use this as a costume accessory to…
Simple holster with a pocket fitting a ø20x5 mm magnet to store the Build Plate Cleaner by @kstudioca_1569715. Top and bottom layers are not strictly necessary. Check out my short and longer magnetic knobs here .
We use this to keep track of the air gun at the CNC mill. We super glued magnets into the back of it. I attached the solidworks file so you can feel free to modify it or use it as you see fit. In the next iteration I would 3D print the…
ID card holster, I found that other designs I have come across were not easy to print or use. Therefore I made my design for the cardholder as a starting project for B3D_Printing. The design is based on one that I use for college. A…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 I designed these for one of my costumes (Catwoman): /model/678691 DUMMY 13 outfit collection “DUMMY 13 goes to COMIC…
