R2D2 - Star Wars Home Decor
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
- Pobrania
- 9021
- Polubienia
- 1687
- Ocena
- 4,84
4770 modeli
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
An elegant attempt at rethinking a traditional Christmas tree Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
NOTE: This model is designed for a US Plug shape. I needed a simple & elegant wall mount for the HomePod Mini in the bathroom. I found several models on Esty ( SmartHomeEngineering & BurdProducts ) that I mostly liked but they didn't…
Any feedback would be greatly appreciated . Product page here: https://www2.hm.com/en_us/productpage.0812790001.html Nozzle: 0.4-1.0mm Layer: 0.2-0.8 (Recommended) No Supports needed Scale it as you like :)
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Any feedback would be greatly appreciated . Work in progress Use 6=9 Nozzle: 0.4 Layer: 0.2-0.24mm (Recommended) No Supports needed No Brim needed Scale it as you like :)
I designed this homeoffice cup holder for a christmas gift for my brother. Easy to clamp onto the desk. Printed the first 6 layers in red and switched to blue at layer 7. The last 4 Layers have been printed in red too. Support required !…
Our new foldable Christmas tree! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was…
Introduction: I designed a three part wall mount for my HomePod minis. The parts are: Wall Plate: Secures to the spot on the wall where you want to mount your HomePod mini. Note the arrow indicating the correct orientation. Gripper Plate:…
Most HomePod wall mounts I found had a baseplate that was actually obstructing the high frequencies of the sound when mounted overhead. So I designed this one with the smallest base possible. The HomePod holds fine on its own but you…
Adapter um ein Homematic IP Gerät an ein Danfoss RAVL Ventil anzuschliessen. Das sollte auch mit anderen Ventiltrieben, die auf ein M30 x 1.5 Gewinde aufsetzen, funktionieren. Getestet habe ich es aber nur mit verschiedenen HmIP Geräten.…
This is a wall outlet cover that has a removable shelf for the HomePod mini. It compactly hides the cable inside and creates a nice, stable shelf for the HomePod while keeping the other outlet free for use!
The 2025 Christmas Tree is out! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Emerald Green & Gold The…
Marge and Homer Valve Stem Cap : Bike Cap Fits Schrader Valve Stems.
The door holders wear out over time to the point of being non-functional, so I constructed more robust ones in the same dimensions: The upper part (female) measures 98 x 22 and has a hole spacing of 78mm. The two lower parts (male) have…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Needed a nice looking stand for the Homematic Thermostat. There are 3 versions. A supportfree, that you need to use double sided Table, and 2 with spring loaded mounts. The difference in the last 2 is only in the height. For best…
This is a wallmount for the Home Assistant ZBT-2 zigbee/thread antenna. The mounting holes are designed for M3 countersunk screws. Overall it has a snug fit and offers enough resistance that the antenna cant easily fall out of the mount.…
Update 07.12.2022: Es gibt eine veränderte Version, die leichter zum An- und Abbauen ist: https://www.printables.com/model/334310-eq-3-homematic-ip-danfoss-ravl-adapter-v2-m30-x-15 Alte Version: Adapter um ein Homematic IP Gerät an ein…
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) No Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
A waffle structure bowl! Easy to assemble and looks great in any place - can store decorative balls or fruits - depends on your liking. Print information: Recommended using a lower layer hight (0.15/0.2mm) and a smaller nozzle (0.4/0.3mm)…
Soporte Celular diseñado sobre la imagen de Homero Simpson.
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Simple Case i designed for the HB-RF-USB-2 PCB of Alex Reinert together with the ELV RPI-RF-MOD module. Case has a 7mm hole for an external antenna and a snap fit top. Tolerances are quite tight so make sure your printer is well…
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Simple Apple HomePod Mini Wall Mount – No Supports, Speaker-Friendly A refreshingly simple HomePod Mini wall mount that does everything the others don't. After trying the existing options — all either too complex, needing supports,…
Any feedback would be greatly appreciated . Use color change/pause at layer Nozzle: 0.4 Layer: 0.1-0.2 (Recommended) No Supports needed Scale it as you like :)
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.32mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
I needed a way to get my HomePod Mini off of the counter, hide the cord and power brick, and still leave access to the other outlet! Print this, remove the wall plate, and attach the print with a single screw. The cord threads through a…
Da bei meiner Homematic-Wetterstation ein Löffel vom Windmesser abgebrochen ist (gemäss meinen Kindern, hat der Ball diesen beinahe nicht berührt :-) ), habe ich eine neue Nabe und Windlöffel gezeichnet. Die Form und die Idee für die…
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Case for a Raspberry Pi 4 B running Home Assistant OS with two modules : Zigbee 3.0 USB Dongle RTL-SDR Dongle for 433 Mhz devices Other components used : 30mm fan (from my previous RPi 4 case) 4x m3 insert (CNCKitchen M3 standard insert)…
While designed to solve the problem of having no cup holders in my Motor Home this cupholder could be used in many places/vehicles. It hangs on door pockets, dividers, dashboard etc. Best printed in PETG for strength but also fine in a…
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) No Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Made on both the Prusa Mini and Bambu X1C (Bronze on the Bambu and Red on the Prusa Mini)
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 15% No Supports needed Scale it as you like :)
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
I was too lazy to replace my office duplex outlet with a GFCI or combo one, so I modified this design. If you use the sliced file, I tried to keep the supports to a minimum. Thanks, Jordanburgy, for the great design!
Danfoss Adapter Print: Material: PETG or PLA Layer: 0,2 mm Brim: 5mm Finnishing: Cut the Ring open at on of the Notches with a Saw. Afterwards you can Fit it onto the Valve. At last Screw on the Homematic Thermostat
These handy and aesthetically appealing stoppers are an ideal solution to keep your doors exactly where you need them while adding a unique decorative element to your interior. The carved cat motif is sure to delight all lovers of these…
A small and clean stand for my Homematic IP wall thermostat. Print it without supports in two pices. I tested it with the following Homematic devices: HmIP-WTH-1 (thermostat) HmIP-WTH-A (thermostat) HM-PB-2-WM55 HmIP-WRC6 HmIP-WRC6-A…
Print it with 0.15mm layer hight and black matte PLA. The notch simplifies installation. This makes it easy to screw in. Use at your own risk.
This is a holder for an Apple HomePod mini that allows you to screw it into a standard recessed light fixture (or any other light socket). It not only mounts your HomePod mini to the ceiling but provides power! All without impacting sound…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) No Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Simple rain sensor for my HomeMatic home automation system. It does not have a heated plate, so it is not suitable for very high humidity (false rain alarm when water condenses on the sensor plate) and it takes some time to dry and sense…
Requires Magnets with a 6mm diameter and 3mm thickness. Moreover a M3x12 Screw (or longer) + M3-Nut is needed, that fixes the hinge of the MagSafe mount. On the bottom there are 4 places for felt stickers (20mm diameter, 3mm thickness).…
Off-Duty in the Outer Rim Collection : R2-Homebrew. A first in a series of bas-reliefs that give us a glimps into the lesser know pastimes of the cast and creatures of starwars. It is widley believed that R2 began this hobby after…
This is for use with the Nintendo Switch game called Mario Kart Live Home Circuit. This is sliced for an MK3S with an MMU. Print instructions This is designed for a MMU to print. If not using the GCODE, load the base first. Then click on…
A remake of the Raspberry Pi 4 B Case - Home Assistant. One centimeter longer so it will fit the sonoff 3.0.
For 18 Homeopathy tube (Boiron)
A small adapter to get a 55mm HomematicIP thermostat, or any other HomematicIP 55mm device, attached to IKEA Skadis. The fit is not as tight as with the original one, could probably add additional spacing to the clips, but it holds it in…
Peça de substituição, batente fechadura de gaveta autocaravana Burstner que se estragou. Replacement part, Burstner motorhome drawer lock stop that was damaged.
A case for fitting the Raspberry Pi4 with Sonoff Zigbee V3 Stick . Needs: 4x Brass Inserts M3 x D4,6 x L3,0 4x Brass Inserts M3 x D4,6 x L5,6 4x BHS 3x6mm 4x ISO 7380-1 3x8mm Build should be selfexplaining, but: The 4 shorter Brass…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.32mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Bring peace and positivity to your space with this 3D printable Om Diya Holder . This minimalist design features a sacred Om (ॐ) symbol cutout on a curved backplate — representing calmness, balance, and unity. 🪔 Design Features: Smooth…
I wanted to hide the HomePod Mini's power cable without any "fancy" artifacts, so I came up with this design where you could hide the cable inside the stand and as a bonus get a little more bass thanks to the empty stand enclosure. Print…
This is a "lock" which means you can tell at a glance (just poke your head in the room) if the cage doors are completely closed. It's for piece of mind since otherwise to know the cage is fully closed you must physically tug on each door,…
MSLA Cyclop Printer ! If you like my work, you can help me by buying me a coffee, thank you! https://buymeacoffee.com/guillaumehy or paypal.me/guillaumehaouy I should point out that I am a 20 year old student, it takes me a huge amount of…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 15% Supports needed Scale it as you like :)
Gehäuse für HomeMatic HM-LC-Sw1-PCB Funk-Schaltaktor 1fach. Zum Fixieren wird eine M3x5 Schraube benötigt. Ich habs mit PETG gedruckt…
This is a ESPHome based Hichi/Volkszähler interface specifically for the Holley DTZ541 that has alignment pins instead of the more common round indent around the IR interface. UPDATE 2023-01-29 Previously mentioned issues with the…
The Phomemo P12 Pro label printer has been great for aiding in my Gridfinity organisation. So I wanted to organise the tool which helped me organise. This model is a 3x2 Gridfinity bin which holds the Phomemo P12 Pro along with 2 label…
A cool looking Raspberry Pi 3B case inside Home Assistant logo :) The model uses 2 colors yet it designed to be printable on a single nozzle printer thanks to Z hop feature. The model has a GoPro mount which allows mounting the case on…
This is a snap on handle for Home Decorators Collection cellular blinds. The blinds are quite nice, but it is difficult to pull the blinds all the way to the window sill since there is no handle to push down on. I designed a minimalist…
Case for HmIP-PCBS2 actor from HomematicIP with relais board installed. Easy to print, no supports needed. You might need to press the clip for the board in with your finger before it moves freely and you can clip in the PCB. One version…
I needed a display for my outdoor temperature sensor which is connected to Home Assistant. So I built one with a ESP8266, Lolin D1 mini with official OLED shield. It features a WIFI connected OLED-display, with capabilities to display…
This is the enclosure for smart window blinds I designed. They cost approx. $6 per window and work with both Alexa and Apple Homekit. Unfortunately, I am unable to upload all necessary files here. If you are interested in this project…
Pomo para armario con el logo de spiderman homecoming del traje, con metrica M7x1 6H Se recomienda impresion con soportes a resolucion 0.16 idealmente, relleno al 25%. Puedes realizar cambio de filamento para que el logo sea de un color…
Context After searching for a good HomePod Mini wall mount, I always encountered the same issues. either no cable management, or hanging below the socket, and most important with all the weight on the tiny Apple charger. Why yet another…
Strengthened connector and nice fit with PETG. Remixed from https://www.thingiverse.com/thing:2802987
Exclusive Commercial License on Patreon: For those looking to turn their prints into profits, I offer a Commercial License on my Patreon page. By subscribing, you gain the right to sell the physical prints without sharing the digital…
A smart Housing for the Homematic Smarthome Actuators - in this case for a 2x switch. The actuator is fixed by a smal gap where the tab goes in and opposite there is a small pin so it cannot move! The topcover is fixed with one M3 srew…
I created these Key Tags as a simple way to label keys with text and color-code them as well. I've provided 206 3MF and 206 MK4 g-code files with pre-defined text to get you going straight away! Choose from automobile makes and models,…
lightswitch cover for TRADFRI IKEA smarthome switches and buttons. Stop your familymembers and friends from turning off your smart lights the wrong way! No tools required!
Hi! I use a simple IR-Remote to control some of my smart-home devices and automations using home assistant. I built this little IR-Receiver using an ESP32 (CH340) USB-C Board and a KY-022 IR-Receiver. Both very inexpensive components. I…
Home Assistant Yellow stand for mounting device vertically, Printed on a Prusa Mini+ using Paramount3D PETG filament, but any filament is fine. Normal settings at 0.2 layer height.
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
This is a very simple and easy to print model of base plate or mounting for Apple HomePod. HomePod is fitting perfectly into a recess. Can be placed normally (vertically pointing up) or tilted on the side to expose touch panel more to the…
Use - D1 mini esp board - BH1750 light sensor
List of possible outcomes: 3x Video Game 2x Social Media 2x Watch TV 1x Take a Nap 1x Go for a Walk 1x Roll Again 1x Household Chores 1x Get to Work Two version available: Single color MMU version Disclaimer: This 12-sided die is NOT HR…
for english description see below. Deutsch 19 Zoll Gehäuse für ELV Charly. Was ist ELV Charly? ELV Charly ist ein Raspberry Pi (3B) kombiniert mit einem Homematic Funk-Modul RPI-RF-MOD (die selbe Hardware wie in einer Homematic CCU3). ELV…
Exclusive Commercial License on Patreon: For those looking to turn their prints into profits, I offer a Commercial License on my Patreon page. By subscribing, you gain the right to sell the physical prints without sharing the digital…
Exclusive Commercial License on Patreon: For those looking to turn their prints into profits, I offer a Commercial License on my Patreon page. By subscribing, you gain the right to sell the physical prints without sharing the digital…
Ich beschreibe hier eine parametrisch anpassbare Hohlraum Kabeldurchführung am Beispiel eines Homematic Leistungssensors Der Leistungssensor von Homematic IP wird an eine Moderne Messeinrichtung IMEI angeclippt. Wenn diese jedoch in einem…
An alternative base plate for the Homematic HM-LC-Sw4-PCB 4-Channel Switch Actuator using the https://www.printables.com/model/64242-din-rail-clip to be able to mount it to a DIN rail. The base plate requires two DIN rail clips that can…
I reused the bees from the linked original model to create a sign to make your bees feel right at home in their beehive box. PrusaSlicer will add layer changes for you to get each color. I used all Prusament PLA in this print – “Oh my…
Simple HomePod mini shelf for Ikea Nordli. Print 45 degrees to prevent support.
When i was looking for a fitting key holder for various keychains of mine, none were eaxactly what i was looking for. I remixed a few Printables with their shapes and designed a backboard with custom key hooks, which resulted in this…
15% infill .1 Layer height Organic support
I use the HC-SR04 sensor to measure the distance of a person approaching to turn on or off the light with Home Assistant automation. I use the D1 Mini board.
Výhoda této sponky je, že tolk nezmačká papíry.
After placing my Home Depot lighted candy canes into the ground in the front yard, two of the stakes promptly snapped off. I created this model to replace those stakes with a more robust design. Hope that it helps someone out!
Apple HomePod Mini support ring. Printed in Silver PLA, with supports. P. S. Don’t for get the ❤️ pls… 😊
Problem ist, meine Brauchwasserwärmepumpe Bosch5000DW baugleich Buderus WPT200.4 AS ist Photovoltaik-Ready. Was immer das heist? Den wenn ich diesen Kontakt schließe erhöht sich nur die Soll-Temperatur auf einen Eingestellten wert.…
A simple and easy to print model to give your Homepod Mini the look of a pumpkin. I didn't need any supports, however i did print it with a brim.
❗ WARNING ❗: I made this mount in a way that it will grip the rubber base of a HomepodMini. When I was trying to remove my homepod from it for the first time, I though that I will ripp the rubber base off :D but I managed to disconect it…