3979 modeli
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Inspired by the energy of waves and the elegance of natural rhythm, this sculptural phone stand merges functional balance with fluid aesthetics . Part of the Meyui Onami series , this piece explores how motion and stillness can coexist in…
Wydruk około 14,59 €–17,84 € nettoWstępna wycena jednego wariantu
I use an Apple leather case and that fits good. If you look for a stand where the charging cable can be used: https://www.printables.com/model/401057-iphone-stand EDIT : I added a second version for those who use an apple wallet on thier…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena jednego wariantu
A Minimalist IPhone case with hexagonal Design on the back and a nice snug fit. Works fine with Both PLA and PETG.
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Credit for this design goes to https://www.thingiverse.com/jburd/designs I simply added the cable tracks on the back. I also added an addition file with and extension to support a phone if it isn't magnetic (tested with iPhone 11 and it…
Wydruk około 18,96 €–23,17 € nettoWstępna wycena jednego wariantu
I wanted a fun and better way to use the MagSafe chargers for my iPhone and Apple Watch, so I designed this! :) Printed on MK3S with painted on supports for hands and top of circle face. 3mf attached is the slicer file with settings and…
Wydruk około 7,25 €–8,86 € nettoWstępna wycena jednego wariantu
This cellphone stand is designed for iPhone's and features corresponding recess for power- and AUX-Cables. Printing Recommendations: 0.2 mm layer hight, supports needed (touching buildplate), 15 % infill. Print from PLA will work fine and…
Wydruk około 3,13 €–3,83 € nettoWstępna wycena jednego wariantu
Designed to work ideally with an iPhone 14 Pro or similarly sized iPhone (13, 13 Pro, 14 should be similar) to charge with Apple MagSafe USB-C charger. V2 - Added TPU Base After months of use, I wanted to revise this to fix a couple of…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
Just a simple MagsSafe phone stand with the infill visible. Use the .3mf file to specify an infill that suites your taste. Adaptive Cubic is my favorite infill for this model. Printed at .3mm with supports using Eryone Navy Blue Matte…
Wydruk około 1,59 €–1,95 € nettoWstępna wycena jednego wariantu
iPhone phone stnad
Wydruk około 3,89 €–4,76 € nettoWstępna wycena jednego wariantu
iPhone mount for bike handlebar for phones with a case. Easy clip in, no obstruction of the screen, angle is adjustable. The phone is fully usable while in the mount. You will need additionally 4x M3.5 x 16 screws (ISO 7046) 4x M3.5 nuts…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Whether you've got flexible filament or not, these cases make for an easy print and a sweet looking phone. I designed these cases to print without support, so they turn out very clean. Both versions also provide a buffer for the screen…
Wydruk około 1,67 €–2,05 € nettoWstępna wycena jednego wariantu
I got excited about Apple iOS StandBy Mode and designed a stand with the following in mind: Minimalistic , functional design, compatible with any iPhone model. Suitable for desks (as companion) and bedside tables (as alarm clock).…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
If you like my work please support me. :-) Buy me coffee at ko-fi.
Wydruk około 0,94 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Uploaded the G-Code as well for the prusa mini+ with painted on supports. Supports are needed!
Wydruk około 10,42 €–12,74 € nettoWstępna wycena jednego wariantu
Here is my iPhone Monitor Mount, the perfect solution for using your iPhone as a webcam during Zoom and other FaceTime calls. This mount is designed to work with a Viewsonic monitor and may work with a variety of other monitors. This…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook Pro and the Apple Studio Display, but might fit other MacBooks and…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
Mount any 67mm camera lens filter to your iPhone. It's precisely measured to fit an iPhone 12 (Pro), without a case. I'm using it with a ND2-ND400 (9 Stops) Filter from K&F for filming. Advantages over commercial products I found: All…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
I printed in ASA to be able to withstand the heat in my car. Edit 6/18/24: I added 2 files one for 162mm length phone w/ case and a Step file to be able to adjust the model to your liking. Just make sure the pegs that go into the vents…
Wydruk około 5,98 €–7,31 € nettoWstępna wycena jednego wariantu
Wird das iPhone geladen und liegt quer hat man einen prima Wecker am Bett. Um dies bequem zu realisieren habe ich diesen Ständer mit integriertem Kabelhalter designed. Mein iPhone ist in dieser Hülle . Gedruckt in PETG, Düse 0,6 mm, layer…
Wydruk około 3,33 €–4,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook, but might fit other MacBooks. Here's the version that uses the MagSafe…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
I would print in PETG. The fit is tight and the top will stay secure just with the snap fit over the camera. The bottom needs is also tight but may need a tiny bit of adhesive to not slip off when taking it in and out of your pocket.…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Recreated in Fusion360 based on original design by @80am33. Included a version with names, so you can customize it in Fusion360. Enjoy!!! Recriado no Fusion360 baseado no design original do @80am33. Inclui uma versão com nomes para que…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena jednego wariantu
Harry Potter Hogwarts Phone Back Cover
Wydruk około 3,81 €–4,65 € nettoWstępna wycena jednego wariantu
iPhone 12 and 12 pro case with a hexagonal tile pattern. This case protects the screen as well as the camera lenses
Wydruk około 6,25 €–7,63 € nettoWstępna wycena jednego wariantu
With the upcoming standby mode in iOS 17 I wanted a way to mount my phone while charging to make use of the feature. As I already had a MagSafe charger I designed this model to allow using it rather than need to plug/unplug cables. I've…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
apple Iphone 17e case
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
I have designed a stand specifically for the Apple Air M1 screen, providing a secure holder for the iPhone 14. Additionally, this versatile stand can also be used as a screen cover for the built-in camera. Two models are included : one…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
Strong and solid iphone holder for my car dashboard. It fits on the top dashboard lip, and is very specific for the BMW 320 series 2022. I 3D scanned the dashboard lip, and reconstructed the holder following the shape. It fits perfectly,…
Wydruk około 6,48 €–7,92 € nettoWstępna wycena jednego wariantu
My second approach for an easy to use and rarely to clean strainer for floor level shower drains. This time I replaced the original tube ("TECE Tauchrohr" see pictures) by an own designed one.The new tube is for the siphon-function in…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
PRINTER : Kobra 2 pro BRAND: Anycubic MATERIAL: PLA LAYERS: 0,2 mm INFILL: 15% BRIM: No SUPPORT: Only on Base and Base Slide (look in pictures) PLS READ ALSO TEXT DOWN BELOW!!! UPDATE: updated versions with better fit for IP 13/12 mini.…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
So if you're a user of Heges or a 3D scanner that uses the TrueDepth camera you must hate how you have to hold the iPad towards the subject and not even being able to see it, well this will fix that issue, just place a 2.5mm mirror on the…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Iphone 7, 8, and SE2020 case that should be printed with solid materials like PETG or PLA . I recommend PETG as it provides just a bit of flex to the case which can help with getting it on and off. PLA will work just fine just be careful…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
MacOS Ventura and iOS 16 introduce Facetime being able to use the iPhone's camera as a webcam. For this, the iPhone needs to be attached to something. I chose the screen, this is for an LG 38" display. The holder fits over the front and…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
Der Handyhalter ist mein erster 3D-Entwurf, dennoch finde ich, dass er mir gut gelungen ist. Die zweite Version verfügt über eine Aussparung für die Kamera, eine raue Oberfläche auf der Vorderseite und eine mit Hexagonen bemusterte…
Wydruk około 15,98 €–19,53 € nettoWstępna wycena jednego wariantu
Iphone 17 Pro Slim case
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
Introducing my Cold Shoe Mount for Quad Lock® … it’s the fastest way to mount and secure a light or microphone to your Quad Lock® case. You no longer need a phone clamp or a tripod to mount gear to your phone. Instead, I made the first…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Iphone 17 Pro Replica sized as the original
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
Printed with PETG to make it more sturdy
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Apple TV iPhone FaceTime MagSafe charger holder for iPhone 12 to 14 up to Pro MAX models. Fits up to iPhone 14 Pro MAX as shown here. Beginning with iOS 17 Apple will support FaceTime calls with Apple TV like shown here . I directly saw a…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
Wall mount basket iPhone 12 ProMax and remote Sber TV Корзина для настенного монтажа iPhone 12 ProMax и пульта дистанционного управления СберТВ.
Wydruk około 2,04 €–2,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Iphone 3G OR 3GS replica sized as the original
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
Uses a standard 56 MM diameter MagSafe charge “puck' and the standard Apple Watch charge ”puck". Has a takeup spool for long wires and a relief for the camera “bump”. Printed here in PolyTerra PLA at 0.3 later height (no support) This…
Wydruk około 3,08 €–3,77 € nettoWstępna wycena jednego wariantu
This is an iPhone stand designed to print flat on the build plate in multiple pieces that snap together. Goals were to print fast, use a minimum amount of filament, and to pack into a very small space. Although tested with iPhones, this…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena jednego wariantu
Developed a personal project involving the design, prototyping, and 3D printing of an iPhone 12/12 Pro case with integrated MagSafe wallet and rear MagSafe charging opening. Created in Onshape by PTC and manufactured on a Creality 3D CR-6…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu
Desk variant of my “ Charging butler / iPhone + Watch + AirPods Pro wall mount charger ”. Charging butler / Apple iPhone, Watch, AirPods Pro desk charger with Apple “Standby Mode” support in iOS 17 and with integrated 65W power supply to…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
Mit Hilfe des Wandhalters, kann man den IKEA Siphon LILLVIKEN stabil und auf einfache Art und Weise an der Seitenwand des Unterschranks befestigen. IKEA hat hier keine Befestigung an der Wand vorgesehen. Der gesamte Siphon, inklusive…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
The MagSafe Compatible iPhone Stand is a practical and versatile 3D printable design tailored for users eager to fully experience the new StandBy mode in iOS 17 while keeping their device charged using Apple's original MagSafe accessory.…
Wydruk około 4,05 €–4,95 € nettoWstępna wycena jednego wariantu
See the original model. Although it was originally designed for non-Max iPhone versions, it's also working well with an iPhone 17 Pro Max. Be sure you have good bed adhesion prior to attempting this print -- the skeletal design leaves a…
Wydruk około 2,33 €–2,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design is suitable for iPhone models 6S, 7, 8, SE 2nd generation and SE 3rd generation as they share a similar design and dimensions of their cases. All butons and cameras are accessable. For a perfect fit you should use a phone case…
Wydruk około 0,94 €–1,14 € nettoWstępna wycena jednego wariantu
so you can play ur phone like a ds when using the delta app
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
Compatible with iPhone 13
Wydruk około 10,30 €–12,59 € nettoWstępna wycena jednego wariantu
Your phone can be mounted in front of the driver to provide driving directions. I found the iPhone maps more reliable than the cars' maps. I mounted it easily in an older Ford Explorer and in a Lexus ES350. It needs a ledge about 1 - 1-½"…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Aiphone IX-EA IP Video Door Station Intercom Junction Box Junction Box for the Aiphone IX-EA IP Video Door Station Intercom. I tried in ABS and PETG, having way better results with PETG. ABS tends to warp easily. Two holes for the Aiphone…
Wydruk około 6,05 €–7,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Built in camera of display is not covered. I used the slicer to make an additional slot for buttons on the left side of the phone. See images.
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
FIXED MagPowerstation Q820 - iPhoneSE podstavec k bezdrátové nabíječce iPhone SE je krátký a nefunguje bezdrátové nabíjení. Tento doplněk přizvedne telefon o 15mm a zfunkční bezdrátové nabíjení iPhone SE.
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
This stand for your Iphone is a luxery one so your Iphone can function as a night-alarm clock, or during the day on your desk. You can use it with or without a (book)case. In case you have a book-case, it can fold on the top over the…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
iPhone XR Phone Stand (Specialized Sirrus)
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
Simple and quite chunky phone stand for monitoring my Prusa Mini. Printed with Polymaker Polylite PETG
Wydruk około 3,66 €–4,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you want to empty a barrel etc using a siphon but find it uneasy to start the siphon - this is an easy way to do so. This shaker siphon is a actually just a valve. By shaking it down into the water (or other liquid), that water can…
Simple and elegant stand made for the Apple Magsafe charger. Easy to print in place. UPDATED for both new 2024 and old 2020 magsafe charger versions. Idea Inspired by the Twelve South Forté stand used by Apple to showcase the new StandBy…
iPhone 16, iPhone 16 Plus, iPhone 16 Pro and iPhone 16 Pro Max cases Print it in TPU for maximum convenience. If printed without top and bottom layer, it will be easier to peel from the print bed. Check my other models for even better…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
Modular Desk Organizer System – Standard Set This Desk organizer design includes four interchangeable components sized to fit together naturally. The set consists of a Classic Phone Stand , Pen Holder Module , Storage Cup Module and a…
These are four to scale models of the new iPhone 12 (12 Mini, 12 Pro, 12, 12 Pro Max). They are perfect if you want to check which size fits into your pocket. Print instructions I have printed the models upside down and standing with a…
iPhone 17, iPhone 17e, iPhone 17 Air, iPhone 17 Pro and iPhone 17 Pro Max cases Print in TPU of your choice with SNUG type support at 30 degree overhand threshold. Two variants available - thin with camera border and regular (thick) -…
The charging cable can be used while in the stand. I use an Apple leather case and that fits good. Printed on the side. No supports needed!
My dbrand grip case broke and I don't really want to get another one because they are expensive. I made this model based off of the dbrand grip with a couple of my own touches. You can expose the infill on the bottom to create a unique…
Description Simple form, easy to print, no supports Disclaimer: This charger is designed to fit only the original Apple chargers *2025-02-10 Big Update. Currently Apple released 2025 a new charger (Ø 55,5mm and a height of 4,37mm). The…
A simple stand for iPhone 11, 12, 13, 14, 15 and 16. I use an Apple leather case and that fits good. Cutout in the front to still be able to swipe up. I added a second version for those who use an apple wallet on thier phones Printing…
Print at 0.16mm Supports: yes
These models are from the (new) iPhone 14 Pro. The .obj file is for renders. (Usdz file is available but i couldn’t upload it here.) The .3mf file and stl are for 3D printing. If you just want your dummy in one single color, then you can…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
Case for the iPhone 13. It has grips on the side to help prevent drops. Fits the regular iPhone 13 only. Designed for PLA/non-flexibles.
This is a relatively easy to print phone case for the iPhone 15 Pro Max so you can protect your shiny, new, titanium phone. The case consists of two pieces: the case and the camera guard. Print the case in TPU or other flexible filament,…
I took the iPhone 13 CAD models from Front Page Tech and 3D printed them! I converted the STEP files to STLs then printed them out on the Prusa Mini in Red Prusament. The original STEP files along with my exported STLs are included. My…
This model was drawn in Fusion 360 based on the actual iPhone 17 Pro Max technical drawing. The model measures 163.43 mm in height and 77.98 mm in width. The model includes the power button, volume buttons, action button, microphone and…
UPDATE 1 Added Case model with Honeycomb pattern on the frame ______________________________________________________________________ This Case consists of the main cover and a mini bumper for the cameras that fits between the iPhone 13…
IPhone 15 pro case. should be printed in tpu.
Simple case for iPhone 13 Pro Prints easily with PETG or PLA
I designed this case for my iPhone 14 Pro Max when I first got it and was waiting to buy a regular case. I printed this in Ninjaflex TPU (85A shore hardness) which works well. Something in the low 90A scale would be better in my opinion…
Printed in TPU with a 0.6mm nozzle. You may need to slide a knife along the top of the buttons to free them from the case. Use your slicer to create the pattern on the back using infill only with no top or bottom layers for the bottom. I…
iPhone Halter für iPhone 12/13/14/15/16/17 Pro in Verbindung mit dem MagSafe Ladekabel. Durchgangsloch zum Herausdrücken des MagSafe. Bei bedarf mit einem doppelseitigen Klebeband auf dem Tisch fixieren. iPhone stand for iPhone…
I don't know if this counts as a remix, but I believe in giving credit when it's due. I printed and used Leo DIY's case. The print came out great and the case fit well, but I had a hard time pushing the lock and volume buttons. I used his…
Remix of https://www.thingiverse.com/thing:4946346 to make it compatible with the IPhone 11 Print Settings Rafts: No Supports: No Resolution: 0.15 Infill: 100% Filament: 3DJake TPU Orange Category: 3D Printing
Feel free to like and share your make!
I mean I was gonna make just one entry for new iPhone lineup but Apple chosen to 🦆 the naming scheme. here you go brand new iPhones 17, 17 Pro and 17 Pro Max If you’re looking for rest of iPhone 17 models (I mean Air) check link bellow ⤵…
D: Schutzhülle für das Apple iPhone 7 und iPhone 8 Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. E: Safty case for Apple iPhone 7 and iPhone 8 I printed the case in PLA as a hard case…
cover for iPhone 14, material TPE/TPU, layer height 0,2mm, no full top or bottom layer, honeycomb filling
Gona make your own holder or case for your new iPhone? Maybe you want to see how it look before order starts? I printed flat @ 0,1 layer height
TPU 95A Buse : 0.4 mm Wall : 0.4 or 0.8 mm Infill : 5% 2 versions : 1 thick (3.5 mm) 1 thin (2 mm) I added an other version with larger holes to press buttons. I encourage to download these version. The idea is to create a soft material…
This is an iPhone 15 case. I haven’t tested it yet but I aim to test it the next few days. If you make it and test it, please tell me in the comments if it fits or not.
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
This model is free. If you appreciate this model, please leave a download and a like! iPhone 14 Pro and iPhone 14 Pro Max. Stylized dummy phones to see if it fits in your pocket/purse/bag/jacket. Based on measurements and reference images…
This self-designed flexible case fits perfectly on the Apple iPhone 13 pro (iPhone 14 pro version included as well). It offers precise cutouts and covered buttons that are easy to press. I had to experiment with the print settings quite a…
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
