Wyniki wyszukiwania: jewellery

Sortowanie

128 modeli

P
PrintablesClive Harris

Jewellery Tree

Jewellery Tree ,Hang jewellery from branches ,branches have holes for ear rings etc .Tray for smaller bits .Tree and cat glued to tray.Tray has recesses underneath to add weight ,stops unit falling over.I glued steel into recesses 55mm x…

Pobrania
982
Polubienia
265
Ocena
4,93
P
PrintablesJaded Dragon

Crescent Moon Earring/Jewellery Stand by jessjolliffe, remixed for 4 racks

remixed https://www.thingiverse.com/thing:4905821 to have 4 racks and removable base for flat printing. Have not tried to print, hope it works. Holds 40 pairs of earrings or 80 individual earrings.

Pobrania
701
Polubienia
201
Ocena
4,71
P
Printablesso_much_mirrors

Jewellery hanger

I needed something simple so my wife can put her jewellery in one spot, away from cats' paws. Print instructions Print with no supports, any material will do. Prints fit tightly into one another, no need for glue.

Pobrania
606
Polubienia
201
Ocena
5
P
PrintablesHarms3D

Jewellery deer

Modell by TVVGGE from Thingiverse. Just wanted to share here too. Printed the one on the cover in 0.1mm in PETG Prusament Signal White without supports. If I were to print it again, however, I would use PLA instead of PETG.

Pobrania
567
Polubienia
126
Ocena
5
P
Printablesmuddymaker

Jewellery Chest

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker I designed a pirates treasure chest for the boys and the…

Pobrania
481
Polubienia
109
Ocena
4
P
PrintablesMike2121

Deer Jewellery Box

We saw https://www.thingiverse.com/thing:3375898 and thought this looked beautiful, so we printed it, then my sons girlfriend wanted to turn it into a jewellery box, so I imported it into Tinkercad, cut TVVGGE's base extended it and…

Pobrania
453
Polubienia
90
Ocena
5
P
Printablesbruchsturm

Jewellery Tree with hidden box IKEA Skadis Mount

Found this jewellery tree on Thingiverse and wanted to design a mount for my Skadis pegboard. It uses the Skadis T-Clip System by Will and has 2-3 mounting points, depending on the version. The original was quite small, so I scaled it to…

Pobrania
428
Polubienia
87
Ocena
5
P
PrintablesGH2022

Heart Shaped Jewellery Box

A heart shaped jewellery box with a rose on the top. Print Settings Rafts: No Supports: Yes Notes: You will need supports for the lid. Do a filament change to green then again to red Post-Printing May need a bit heat If the lid is tight…

Pobrania
314
Polubienia
46
Ocena
0
P
PrintablesJivinace

Double Jewellery Hands (Remix)

A remix of @dgo42_867207 's “Jewelry Hand” model (which itself is a remix of imaterialise 's “Jewelry Hand” model). A two hand jewellery stand with each hand slightly slanted outwards so they are suitable for easy hanging of rings,…

Pobrania
275
Polubienia
28
Ocena
5
P
PrintablesCaro122

Jewellery stand

this is an easy to print low poly jewellery holder for all sorts of jewellery needs

Pobrania
274
Polubienia
56
Ocena
0
P
PrintablesTJ78

Jewellery Stand with Hand and Box, Schmuckständer mit Hand und Ablagefach

Hier ein Schmuckständer für Ketten Ringe und sonstiges Kleinzeug und könnt es skalieren wie Ihr es braucht. Ihr benötigt nach dem drucken noch Kleber. Viel Spaß Ergänzung der 3 Teile als einzelne Objekte Update vom 05.07.2023: Print in…

Pobrania
256
Polubienia
34
Ocena
5
P
PrintablesKamil Rajtar

Jewellery Stand - Earrings wall and box

Combo box for earrings and rest of jewallery addons. Earrings wall as separate part for printing in horizontal orientation and passible to usable individually.

Pobrania
195
Polubienia
48
Ocena
0
P
PrintablesMrObvious

Trinket/Jewellery Drawers

Chest of drawers for storing trinkets or jewellery. Can be printed at a range of layer heights, images shown are printed with the body at 0.3 µm and drawers, feet and handles at 0.2 µm. Print body and all 4 drawers, then print 4x drawer…

Pobrania
191
Polubienia
102
Ocena
0
P
PrintablesRon

Ikea Skadis Ring holder - Jewellery holder

A simple ring holder for the Ikea Skadis. Fits snug on the Skadis pegboard and will hold severl rings. Printed in PLA and with no supports.

Pobrania
190
Polubienia
30
Ocena
2
P
Printablescbo

Holder for jewellery (earrings, chains, rings)

Holder for some earrings. Holders on the back can be used for 5 chains or rings.

Pobrania
188
Polubienia
26
Ocena
0
P
PrintablesNiklavs

Jewellery storage

I added the cutouts in the frame to save on time and material but this will still be quite a long and heavy print. ~9h for the frame ~2h for large drawers (x2) ~1.5h for small drawers (8x). ~0.5h for the hooks. So around 25h of print time…

Pobrania
179
Polubienia
99
Ocena
0
P
PrintablesPapaBravo

Tray Array for Jewellery or other small items

The other half never puts her jewellery away and prefers to sling it all in a small bowl at the end of the day. She then has to fish out the items she needs the next morning. So, I made her this organiser tray array that consists of 17…

Pobrania
177
Polubienia
37
Ocena
0
P
PrintablesDr. Wombatson

Jewellery Gift Box for Valentines Day

Happy Valentines Day! If you need to send flower ,jewellery and little surprise to your girl friend or wife, just make this model and fufill all these things.

Pobrania
177
Polubienia
66
Ocena
5
P
PrintablesDust

Jewellery box insert or tray

Designed as a simple jewellery box insert or tray. To replace the one that was stolen by thieves! :( openscad source is included in case someone wants it as a base for something else.

Pobrania
165
Polubienia
18
Ocena
4
P
PrintablesFranks3y

Squiggle Jewellery / Jewelry dish

A fun pie dish shaped jewellery dish. Printing and Assembly The dish shown in photos was printed at 0.2mm layer heights using a 0.4mm Nozzle. It should print well with larger nozzles, although the crisp edges may become more rounded.…

Pobrania
164
Polubienia
31
Ocena
5
P

Jewellery Tree Stand

This Jewellery Tree Stand consists of 3 parts. NO SUPPORTS OR GLUE NEEDED!!!

Pobrania
163
Polubienia
32
Ocena
3,75
P
PrintablesArtim

Jewellery hanger/stand (earring)

Printed in 0.2mm White Nebula PLA No supports needed Printed on Elegoo Neptune 3 Pro

Pobrania
159
Polubienia
36
Ocena
5
P
PrintablesLayers Studio

Simple Jewellery Tree Hanger

This modern, simple jewellery tree hanger is the perfect storage solution for necklaces. It is 3D printed and made of wood, giving it a stylish and sleek look. It is designed to keep necklaces secure and organized, perfect for any bedroom…

Pobrania
157
Polubienia
40
Ocena
0
P
Printablesmuddymaker

Coffin Jewellery Box

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Coffin Jewellery Box. You'll need 4 8x3mm neodymium magnets.…

Pobrania
153
Polubienia
54
Ocena
0
P
PrintablesTomtom5893

Mechanical Jewellery Box

I designed this jewellery box to resemble a carousel. When you turn the little ball on the top of the “tent”, the four drawers will slide out from the sides. Ideal for storing a few small items like rings and small neclaces. Here's a tip:…

Pobrania
149
Polubienia
63
Ocena
0
P
Printables3D Elf

Beard Bling Jewellery Charm Ornaments

Pimp up those beards with Beard Bling Simply twist the charm around the beard hair until it tightens, Easy to create your own Beard Bling, from logos, characters to simple shapes. Anything is possible. The 16mm spiral has a 3mm rod for…

Pobrania
144
Polubienia
90
Ocena
0

Keyring/Jewellery Display Stand

I designed this when I was struggling to find a way to display handmade keyrings at craft shows. But could be used for hanging necklaces or bracelets as well. The top piece has a slit in it to be able to place a sign on top to display…

Pobrania
139
Polubienia
21
Ocena
0
P
Printablesryanba

Copenhagen Round Tower - Jewellery Box

A jewellery box / small container made to look like the Round Tower in Copenhagen, complete with its internal spiral slope. To print: For all 4 parts (RoundTowerBody, RoundTowerObservatory, RoundTowerRoof, RoundTowerPin): 20% infill 0.4mm…

Pobrania
136
Polubienia
21
Ocena
0
P
Printablesmuddymaker

Crystal Jewellery Stand

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Crystal Jewellery Stand. Step file included for those that…

Pobrania
132
Polubienia
51
Ocena
0
P
Printablessouthbaygsr

Jewellery Box Divider and Tray for Ear Rings

The divider can sit in the bottom of the drawer and the trays can stack on top. The dimensions are 211mm x 100mm x 11mm tall. 0.3mm, PLA, Sovol SV01

Pobrania
131
Polubienia
20
Ocena
0
P
Printablesrav

Jewelry Jewellery stand display shelf

Print 1x base and 3x peg - depending on your printer pegs may need a drop of super glue... or not :)

Pobrania
130
Polubienia
49
Ocena
0
P
PrintablesTurgon

Jewellery Stand / Necklace holder

No supports or glue are needed. Jewelry stand designed to hold long necklaces. It is 25 cm tall in total, with a 20 cm base and a 15 cm top section. It is designed to hold 18 hooks, allowing for 18 necklaces.

Pobrania
116
Polubienia
16
Ocena
0
P
PrintablesMathis

Jewellery (Schmuck)

Box für Uhren, kette, Ringe und schmuck. Kann aber auch für andere nützliche Dinge als verstauraum genutzt werden.

Pobrania
114
Polubienia
8
Ocena
0
P

ClearMindCasting Jewellery Resin Calibration Object

Yet another resin calibration object, hopefully we don't need these some day. -Designed specifically for jewellers to slot stones of 6mm, 5mm, 4mm, 3mm, 2mm, 1.5mm, and 1mm and test exactly how accurate a resin print will be in reality.…

Pobrania
113
Polubienia
6
Ocena
0
P
Printablesolivvybee

Stud Earring Insert for Stackers Jewellery Box Classic Trinket Layer

This is a small tray insert for the Stackers jewellery box Classic Trinket layer, for holding stud earrings. Each tray fits exactly into one of the compartments and can hold 4 large pairs of stud earrings or more if the earrings are…

Pobrania
111
Polubienia
32
Ocena
5
P
PrintablesWidsa

Gayer-Anderson Cat Egg cup/ Jewellery holder

Reworked the 3d model from Scan the wrold: https://www.myminifactory.com/object/3d-print-gayer-anderson-cat-at-the-british-museum-london-4010 Added cup to be used as an egg cup or Jewellery holder. Please note for egg cup you will need to…

Pobrania
105
Polubienia
18
Ocena
0
P
PrintablesD33DOz

Trinket Tray | Jewellery holder - Heart

This is a design for a Trinket Tray. Re-size as necessary. 3 Models attached. You can customise these by selecting "Add part" on your slicer and adding Text and centring it. See pictures for example. For private use only. For donations or…

Pobrania
99
Polubienia
10
Ocena
0
P
PrintablesTs3D

razor keychains / jewellery

keychains / jewellery

Pobrania
96
Polubienia
21
Ocena
5
P
Printables3D Print Fun

Keyring or Jewellery Stand with hidden magnets

I needed a holder/stand for my keyrings, so I came up with this idea and made it with hidden magnets so that it could be put together with little effort. No clue is needed. Only some support for the "arms". I have printed it in PETG for…

Pobrania
87
Polubienia
8
Ocena
5
P
PrintablesShaya
Pobrania
85
Polubienia
18
Ocena
0
P
PrintablesBen Cresswell

Cylindrical tiered jewellery organiser

Rotating Jewellery Organiser Keep your favourite jewellery neatly organised and beautifully displayed with this elegant rotating jewellery organiser. Designed to sit perfectly on a dressing table, bedside cabinet or bathroom vanity, this…

Pobrania
83
Polubienia
24
Ocena
0
P
PrintablesRixxn

George Russell F1 Pose Jewellery Hanger

This jewellery hanger showcases George Russell in one of his well-known celebratory or race-ready poses, transformed into a sleek, minimalist accessory stand. The design incorporates hooks and slots strategically placed along the…

Pobrania
82
Polubienia
2
Ocena
0
P
PrintablesThael

Sphericon - mathart sculpture or jewellery (pendant, bracelet)

Print Settings: Layer: height:0,2 perimeters: 3 solid layers: top4 bottom4 Infill: 10% Support:none Advanced: extrusion width: default: 0,45 first layer: 0,45 perimeter: 0,45 external perimeter: 0,45 infill: 0,4 solid infill: 0,7 top…

Pobrania
81
Polubienia
17
Ocena
0
P
PrintablesLayersLab

Foldable Jewellery Organiser

Foldable Jewellery Organiser Jewellery organisers come in two versions. Each design is stored in its own folder and the main difference lies in the first box containing a jewellery-holding panel while the other has space for a mirror…

Pobrania
80
Polubienia
73
Ocena
4
P
PrintablesSDio

Crystal Ore - Jewellery Ring Holder

A basic jewellery & ring holder with crystal ore design

Pobrania
79
Polubienia
23
Ocena
0
P
PrintablesNeil Ramsay

Jewellery / Jewelry 2.35mm rotary bit holder

A holder for up to 60 2.35mm rotary bits. Space beneath each for a 12mm high label (standard Ptape) for organisation. Comes in two versions: the basic bit holder the bit holder with a lip and a lid.

Pobrania
72
Polubienia
17
Ocena
0
P
PrintablesNeil Ramsay

Paintbrush, Pencil, or Jewellery files holder with rotating base addon

This is a 9-sided tool holder (why 9? Why not!) that I designed specifically for separating out my jewellery files into identical cuts, but it could be used with anything, really. Pencils, wood files, paintbrushes… anything that would fit…

Pobrania
68
Polubienia
4
Ocena
0
P
Printablesgrosi

Simple Jewellery Stand

I designed this jewellery stand for my wife. It is possible to use some cork or similar to improve the look and feel. Print settings 0.4 nozzle 0.2 layer height 4 wall loops only little support for the joint (see screenshot) tested with…

Pobrania
67
Polubienia
13
Ocena
4
P
PrintablesPakoke

Tree jewellery hanger

Jewellery tree like hanger, printable without supports, easy to assemble,

Pobrania
66
Polubienia
12
Ocena
0
P
PrintablesTirthak

Jewellery Organiser

Can display 15-16 Pairs or earrings and 18 necklaces, remaining things can be divided in the compartments below

Pobrania
64
Polubienia
24
Ocena
5
P
PrintablesDavid_J

Jewellery Stand

My wife has a number of fine gold chains that invariably tangle if stored in a jewellery box, and she's has been asking me for a solution... so here it is. Designed in OpenSCAD, so the design can be varied to suit the materials you have…

Pobrania
64
Polubienia
23
Ocena
0
P
PrintablesHana Matenova

Stackable boxes/organizers for jewellery and hair accessories

Boxes of different heights. For clips, hairpins and other hair accessories. A low box suitable for jewelry. The boxes can be placed on top of each other nicely. Printable without supports.

Pobrania
61
Polubienia
11
Ocena
0
P
PrintablesMarcB

Surf fin jewellery hangers

I printed it in woodfill fillament, but I guess almost all other types will also be fine. Used bluetag to attach it to the inside of a mirror cabinet. I printed with a layerheight of 0.15mm and a 0.6mm nozzle.

Pobrania
58
Polubienia
17
Ocena
0
P
PrintablesAna Pereira

Jewellery Box

A compact Jewellery Box where you can save your special objects. On this box you have differents compartments where you can store rings, necklaces, watches, bracelets, earrings.

Pobrania
56
Polubienia
12
Ocena
0
P
PrintablesNeil Ramsay

Jewellery / Jewelry tube cutting jig

A jig for cutting thick wire or metal tubes with a jeweller's saw. Requires 3x M5x6 heat-set inserts and 2x M5 bolts. Slots for mounting to a desk or board with 4mm or #8 wood screws (countersunk). 3 parts: 1x Sled: has a 45 degree slot…

Pobrania
55
Polubienia
10
Ocena
0
P
PrintablesDMTMKGWM

Jewellery Box with Compartments

A jewellery box with removable and interchangeable compartments based on the need.

Pobrania
52
Polubienia
11
Ocena
5
P
PrintablesThael

Sphericon / mathart, sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
50
Polubienia
10
Ocena
0
P
PrintablesTheMadRobot

Jewellery wire forming tool

My wife likes making jewellery and wanted a tool to model the wire she uses into various size shapes so I designed 2 tools for this purpose with metric measurements on them Square tool forms wire to the following sizes…

Pobrania
47
Polubienia
9
Ocena
0
P
PrintablesSteph

Jewellery earring plug plate

Heavilly inspired by the wall mounted design by Phi.gl I chose to make a more simple solution only for earrings, as I did not need the additional storage for other types of jewellery I have made this by hand, on Tinkercad, so don't expect…

Pobrania
46
Polubienia
9
Ocena
0
P
PrintablesThael

Sphericon / mathart, sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
45
Polubienia
9
Ocena
0
P
PrintablesBredda _

Table Tray for jewellery and items

Organize in Style: The Modern Hexagon Valet Tray Transform daily clutter into a curated display. Designed for the discerning individual, our valet tray’s sharp, architectural lines make a bold statement on any desk or nightstand. The…

Pobrania
44
Polubienia
8
Ocena
0
P
PrintablesThael

Sphericon / mathart sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
44
Polubienia
13
Ocena
0
P
PrintablesAxeOfDurin

Jewellery box for IKEA Alex

Hey i want to introduce my 3D model of a jewelry box designed to seamlessly integrate into the drawer of an Ikea Alex desk cabinet. This bespoke jewelry box offers a compact and elegant storage solution for your precious accessories while…

Pobrania
43
Polubienia
16
Ocena
0
P
PrintablesIR Blinx

Jewellery Hooks

A wall mounted set of hooks to hang jewellery on. 2 hook options

Pobrania
42
Polubienia
10
Ocena
5
P

Modular Jewellery Organiser (and accessory) Drawer System

Introducing the Modular Jewellery Organiser Drawer System , a customisable 3D-printable solution for organising and storing jewelry. This modular drawer system is designed for flexibility, allowing you to mix and match inserts for…

Pobrania
41
Polubienia
6
Ocena
0
P
PrintablesBruno Germany

Tin with lid / Jewellery tin

70 mm high tin nice design with lid. Both parts dont need any support material during the print. The models are designed with Fusion 360 !

Pobrania
41
Polubienia
8
Ocena
4

Modular jewellery holder

Arrange the tray the way you need it. New inlays incoming soon :)

Pobrania
41
Polubienia
35
Ocena
0
P
PrintablesDazza

Anglo-Saxon Style Jewellery Box

Anglo-Saxon Style Jewellery Box. Pretty little box to keep items you've pillaged in.

Pobrania
40
Polubienia
9
Ocena
0
P
PrintablesEmjay

Deer Jewellery Stand

Just slightly thicker antlers to holder up larger ring weights. You will need to glue the antlers in place to hold them in place. Print Settings Printer: Prusa Mini Rafts: No Supports: No Resolution: .20 Infill: 15% Filament: Prusament PETG

Pobrania
39
Polubienia
1
Ocena
0
P

Spinning Jewellery Hanger

This compact jewelry hanger spins using a lazy Susan bearing, giving you easy access to your accessories. Designed with multiple hooks and slots, it can hold bracelets, chains, rings, and more—perfect for keeping your collection…

Pobrania
38
Polubienia
14
Ocena
0
P
PrintablesIon G

Jewellery Chest

Jewellery Chest

Pobrania
37
Polubienia
11
Ocena
0
P
PrintablesThael

Sphericon / mathart sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
36
Polubienia
6
Ocena
0
P
PrintablesJason Ankiewicz

Fold out safety box with pull out lock pin//Safe organizer for cash jewellery etc

This model was designed to address a very common issue all of us face, Whether you have a small safe or a big safe it is always unorganized with cash , jewellery or any other valuable's always laying around unorganized. This safety box…

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesGon Garcia

Sanding Tool for jewellery

i love making pendants, rings and similar stuff out of silver or nickel silver, (or alpaca as we call it in Argentina). one of the more tedious tasks is the sanding.. and some times there are small parts where only sand paper could be…

Pobrania
34
Polubienia
11
Ocena
0
P
PrintablesTelegramclam

Jewellery Divider

Jewellery divider

Pobrania
33
Polubienia
8
Ocena
0
P
PrintablesMadbeyk

Jewellery container with easy thread

Made of two parts. Both are very easy to print, without supports. Enjoy.

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesThael

Sphericon / mathart, sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
32
Polubienia
7
Ocena
0
P
PrintablesBene

Inlay for Jewellery Box

This inlay for a jewellery box consists of two parts. The lower part is only a cross to separate the box into 4 compartments. The upper part has 4 boxes with a base and walls

Pobrania
31
Polubienia
6
Ocena
4,5
P
PrintablesThael

Sphericon / mathart, sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
29
Polubienia
10
Ocena
0
P
PrintablesAkshay Rao

Jewellery hanger

Jewellery hanger

Pobrania
27
Polubienia
12
Ocena
0
P
PrintablesThael

Sphericon / mathart, sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
27
Polubienia
9
Ocena
0
P
PrintablesLegieps

Simple Jewellery Container

This little Container I have designed for my GF, she has lost everxtime and everywhere lost her jewellery. One day I thought it was enough and this is the result of it... The thread is M 60 x 1mm. Print Settings Printer Brand: Creality…

Pobrania
27
Polubienia
9
Ocena
1
P
PrintablesHenk

Jewellery holder

My wife has several brooches, jewellery, that you have to attach to clothing by means of a safety pin. However this makes two holes in the fabric. This gadget corrects that. It is a holder for a thin magnet (20 x 2 mm). Together with…

Pobrania
27
Polubienia
7
Ocena
0
P
PrintablesThael

Sphericon / mathart, sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
25
Polubienia
7
Ocena
0
P
PrintablesTada

Jewellery/ Lithopane Candle box

hinge pins are 1.75mm filament that will be cut after instalation. standart size candle is required, 35 mm dia. lithopane should be 117x61x4 mm outher dimensions.

Pobrania
24
Polubienia
10
Ocena
0
P
PrintablesNeil Ramsay

Jura Inside Ring Vise Trendsetter Jewellery Practice Wheel Adapter

This is a two-part holder to mount the Trendsetter jewellery practice wheels onto the Jura inside ring vise. It comes in two parts, both printable without supports. It slides in between the various gaps in a Trendsetter practice wheel to…

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesThael

Sphericon / mathart sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
22
Polubienia
8
Ocena
0
P
PrintablesThael

Sphericon / mathart sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
20
Polubienia
7
Ocena
0
P
PrintablesThael

Sphericon / mathart sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
20
Polubienia
7
Ocena
0
P
PrintablesFranky Storms

Jewellery from The Cycle: Frontier

This is the lootable rare item from the video game, The Cycle: Frontier. Item Description: A simple and easy way to carry ones riches and memories. Also very easy to lose during an emergency evacuation.

Pobrania
20
Polubienia
3
Ocena
0
P
Printablesjoeltron

Hive Displays [embedded magnet modular jewellery displays]

A magnetic spring sheet bed is going to assist greatly as it will keep the magnets securely in place in the event of any collisions, however, a glass bed should also work. Ensure your hot end is non-ferrous (standard copper nozzles are…

Pobrania
20
Polubienia
4
Ocena
0
P
PrintablesIt Is What

Box for coins / jewellery / others

This model was originally created for large colllectible coins called ‘Fauna and flóra’ ( more about it in the end ), but you can appreciate it for your own purpose (any other collectible coins, jewellery or other things you want to store…

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesEvaS

General Leia Organa Cuff Jewellery for Cosplay Halloween

The cuff prints flat. You can use hot water or a hairdryer to heat up the PLA and bend it to fit your wrist. Please use caution when working with heat. I bent it to shape and then spray painted the cuff. If you print the individual…

Pobrania
19
Polubienia
8
Ocena
0
P
PrintablesThael

Sphericon / mathart sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
19
Polubienia
6
Ocena
0
P
PrintablesThael

Sphericon / mathart, sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
18
Polubienia
5
Ocena
0
P
PrintablesImplode 666

Jewellery Set Stand

Print configurations: Scale: 200% - since model is a bit small Support: No Infill: 15 - 20% Nozzle: 0.6mm

Pobrania
17
Polubienia
4
Ocena
0
P
Printables3DGeoMetrics

Fluted Jewellery Tray with Divider Insert – Modern Ribbed Organiser (Supports-Free)

A modern fluted jewellery tray with a removable divider insert. Ribbed sides, clean lines, and it looks store-bought on a dresser or vanity. What's included (2 STL files) Tray: 175 x 100 x 46 mm, fluted sides - Divider insert: open…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesThael

Sphericon / mathart, sculpture or jewellery (pendant, bracelet)

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Pobrania
17
Polubienia
6
Ocena
0
P
PrintablesDexMoto

Lidl esmara stackable jewellery tray lid

Lidl esmara stackable jewellery tray lid

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesK3vPrints

Jewellery chain holder for Ikea BILLY

The whole thing was uploaded once as a complete part and divided into two parts which should fit most printers in terms of size

Pobrania
16
Polubienia
12
Ocena
0