669 modeli
This mount is used for mounting JSN-SR04T water level ultrasonic sensor on top of the IBC lid.
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
I draw. A lot. You can see my art on Instagram: @matthewjschultz or on my website: https://mjs.art As part of my artistic process, I create custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
I draw. A lot. You can see my art on Instagram: @matthewjschultz or on my website: https://mjs.art As part of my artistic process, I create custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena jednego wariantu
I draw. A lot. You can see my art on Instagram: @matthewjschultz or on my website: https://mjs.art As part of my artistic process, I create custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena jednego wariantu
Adam Ijaz hates you. Dbrand made an adapter for the Steam Deck Dock but didn't make it for the--let's face it--far more common JSAUX dock most of us purchased before the official adapter came out. Thankfully, one of Dbrand's minions took…
Wydruk około 2,37 €–2,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I draw. A lot. You can see my art on Instagram: @matthewjschultz or on my website: https://mjs.art As part of my artistic process, I create custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm…
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
I draw. A lot. You can see my art on Instagram: @matthewjschultz or on my website: https://mjs.art As part of my artistic process, I create custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
I draw. A lot. You can see my art on Instagram: @matthewjschultz or on my website: https://mjs.art As part of my artistic process, I create custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
I draw. A lot. You can see my art on Instagram: @matthewjschultz or on my website: https://mjs.art As part of my artistic process, I create custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu
Hello, Today I have for you a Keg for pouring drinks into 4 glasses . It is the highlight of every party! Automatically divides drinks into 4 glasses. Absolutely amazing! Interesting appearance. For proper functionality, you need to use a…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
As part of my artistic process (drawing, woodworking, etc.) I design, create, and 3D-print my own custom art stencils. Based on the stencils I use in my social media videos , this stencil is part of a new line called my "Creative Stencils…
Wydruk około 1,49 €–1,82 € nettoWstępna wycena jednego wariantu
Another niche art item. While creating art I often need strips of tape that are exactly 1/16" or 1/8" or ¼" (etc.) wide. While I could pull out a cutting mat and a ruler to do it, I wanted a quicker, easier option. This simple jig has…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
I sometimes need a straightedge to draw lines, but if I don't need to measure the lines, I've found that – for me – rulers are less than ideal. So I designed a straightedge that works better for the way I like to draw. The straightedge is…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
I use r0tring isograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
I use Koh-i-Noor rapidograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
I use Staedtler Mars Matic technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
I handcraft and sell a wood “PencilBrush”; think paintbrush, but with pencil lead instead of bristles and paint. You can check that out, here: https://pencilbrush.art I've been thinking about the same thing but with pen ink. Inspired by…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
SHREW MOUSE REJSEK
Wydruk około 4,62 €–5,65 € nettoWstępna wycena jednego wariantu
ijsjes houder voor kinderen.
Wydruk około 5,21 €–6,37 € nettoWstępna wycena jednego wariantu
When adding the Nevermore air filtration system and two additional the bed fans I wasn't happy with the cable management solutions that I found 😕. I started with designing these clips for the cable routing but that left me still missing a…
Pliers specialized in removing JST connectors commonly broken all across 3D printers. This tool allows proper removal without snapping wires. Filament : Inland Peak Green PLA Printer: Creality Ender 3 S1 Both parts should be printed flat…
UPDATE : A new and improved angled version is now available for download! https://www.printables.com/model/475497-angled-jst-tweezers _____________ I've been using this JST tweezers whenever I'm modding 3d printers. If you're like me, I…
I'm currently in the process of upgrading the bulk of my 3D printers with 32 bit silent stepper driver boards. My first upgrade was to the CTC A10s which is a Creality CR-10 knockoff that came preinstalled with an Anet 8 bit mainboard…
Introducing the meticulously crafted 1:48 scale F-35 A/B Model by SmarThuis - Thom Veen. This model boasts recent updates, notably featuring a seamlessly integrated rear section for enhanced structural integrity. Assembling the components…
REVISION HISTORY 2023-07-23: v1.01 released - resolved issues with overhangs in the “teeth” 2023-05-08: v1.00 released PROBLEM I found out that though my JST tweezers, being very effective for pulling out and connecting back JST…
JST-XH.2 Connector Depinner This allows the user to quickly and easily depin up to a 15 pin JST-XH.2 connector. This is a common need for anyone modifying or working on printers. Filament: Inland Lime-Magenta Silk PLA Slow speed 210C…
So yeah, I ripped one of those cables today… The hook works with the Honeycomb Storage Wall .
B2B JST XH Straight Connector pitch 2.54mm 2/3/4/5/6/7/8/9/10/11/12 pin
JST Connector Pliers - Update Improved version of our original JST Connector Pliers Filament: Inland Lime-Magenta Silk PLA Updated: 10mm M3 screw now holds both sides together Added: JST 8pin de-pinner into handle Attachment ring for…
JST Tweezers These tweezers are specifically designed for effortless disconnection of JST connectors. BENEFITS: Designed for FDM Printing No support needed Smooth Operation
On Printables there are many variations of pliers designed to pull JST connector plugs out of their sockets. To me, they were all sub-optimal. I decided to design some JST connector pliers that addresses all the deficiencies I found. The…
🎧 DIY 3D-Printed Headphones – High-Performance Sound, Maker-Driven Design! 🔊🛠 It all started with an obsession— headphones . After 25+ years chasing the perfect pair , spending thousands on different models, I finally asked myself: why…
This is a splitter that turns one fan header into two. It makes it much simpler for wiring up toolheads that have two part cooling fans (Dragonburner, Xol, etc). There are two types of the main body. One designed to fit in the space on an…
Remix of JST Connector Pliers to add a few features: 3D printed screw to hold everything together Narrower head to fit in more places (eg. can now reach most of the connectors in the Bambu Labs X1 head when changing hot ends) Teeth…
It is designed so that no support material is needed when printing, therefore it is an angle below the radius for easy print. Diameter: 40 and 45 mm Height: 55 mm Printet with PETG.
A 5x2 Gridfinity tray for the Iwiss SN-2549 crimping tool. Probably also fits: SN-28B SN-58B SN-025 SN-01BM as these seem to use the same chassis. Versions available: Half-height (3u) - the tool sits about 3mm proud of the top of the tray…
A remix of the JST Connector Pliers to keep them from falling apart. This model will need one heat-set insert for a 3mm screw and a 3mm x 6mm screw to keep them together. As with the original model, print in your choice of filament with…
There are 6 parts of 3D printing drawings Jsaux provide 1. A Deckmate adapter, after using this part you will be able to use Deckmate accessories on the ModCase system. 2. An Hard drive adapter with its own adapter to replace the ModCase…
Model of JSB 10m target shooting pellet. One with JSB logo, one without logo. Model without logo - print upside down.
I just make the original 2_pin connector pin entry larger and added chamfer because metal part wouldn't enter the original design. Now it works like a charm. Print Settings Printer: AM8 Rafts: No Supports: No Resolution: 0.12 Infill:…
I probably feels a bit on the late site of things to make a release like this… I did made a design soon after his passing but it was a bit to detailed for on a lower. and was giving me a hard time to load in a 3d modelling program. so…
This is a little sleeve that fits JST-XH connectors typically found on balance port of LiPo battery used in RC models. My fingers are too big to grip on the little flange and the cables are extra thin. I wasn't too confident handling…
Protector Case Kit for JST-XH Connectors (2-9 Pin) Keep your JST-XH connectors secure with this Protector Case Kit, designed for 2-9 pin connectors. This kit provides durable protective covers that help improve cable management while also…
Is shorter than LDO one, and goes at the back of the printer for an easy access to it. BOM : 3 wago 2 pins as on the pics 2 JST XH female 2 pins 2 x 40 mm cables Some heat-shrinkable sleeve Iron soldering Just have to solder 2 wires to…
Protective caps for Li-Po balancing connectors - JST-XH 2.5mm. Available sizes: 2S, 3S, 4S, 5S Additionally, more sizes can be made by editing the original STEP file (slicing in the middle and adding/subtracting 2.5mm). Please print a…
Pinzas soporte para electrónica, se pueden crear varias para la misma base, deslizan sobre la base para ajustarse. No necesitan soporte. Altura de capa: 0.2 Relleno: 5% Velocidad: 60
5° tiltet holder to correct the tilt of the sensor
Designed for my Voron v0.1, I wanted to ensure the carbon filter fans where serviceable without having to open the electronics compartment. This snap-in mount holds a 2-pin JST-HX "socket" with a rear channel that allows the wires to…
Here is an easy to print and use extractor to remove cables from JST-XH (2.54 mm) connectors. Best way to print is like shown in thumbnail image. You might need to rotate object. Support is required for better dimension accuracy. Can be…
JST-SM 2.5mm 2PIN Connector
Cover for jst xh2.54 male connector 2 pin fast and economical printing to connect additional accessories to a motherboard for example. Assembly requires : a soldering iron a glue gun 2P connectors :…
I used JSN-SR04T waterproof ultrasonic sensor to calculate the water level in a water tank. The idea is to calculate the distance to the water level and use that number to calculate the volume of water inside the tank. The sensor is…
These are just a simple single-piece holder for JST socket connectors used as cable ends that allows easier connection/disconnection and weather resistance (if filled with glue/epoxy/etc.). As designed, they require the connector be glued…
Universal AB Clip version, remixed from kekerino 's project These are the .stl files for half of a clip of either the 2S, 3S, 4S, 5S, 6S, 7S, or 8S size clips. Both halves of a full clip are the same, and they just snap together on either…
Mold for make cable shell for JST-XH or similar connectors. It work with PETG and glue not to hot, about 170-180°C Please note! I made these parts in the context of battery balancing cards. The S indicates the number of cells. And there's…
Three card MicroSD holder that fits nicely between the mounts for the JSAUX Modcase Steam Deck case. When the kickstand is installed, the holder is completely covered. In the pics above, I've just affixed it with some double-sided tape.…
A universal component for mounting power banks or other accessories using 3M VHB tape or Magsafe Magnetic rings. You can also design Velcro fastening openings based on this component. Download the .STEP file to create your own accessory.
Suports free, You will have two sizes, #1 small version #2 Larger Version.
JSN-SR04T Waterproof Ultrasonic Distance Measuring Module case with lid. Feel free to remix if needed, the lid is very tight the first time you try to put it on. I need to find a way to get it to not move around so much inside even…
Remix lapací pasti na sršeň asijskou přizpůsobené na klasickou českou sklenici na med. Průchod pro sršeň cca 8,5mm, únikové otvory cca 5x10mm. → Monitorovací past najdete zde Tisk PETG nebo PLA, bez podpěr. Zhruba 20g filamentu. K…
I made this model for my Voron 2.4 so I could cleanly split the connections for the chamber LED strips. It only takes about 10 to 30 minutes to print and requires no support material. What I used: JST XH Female Connectors (x3) Some Random…
purpose this mount offers rugged angular adjustment even on rocking platforms for sensors AJ-SR04M / JSN-SR04T, used in many arduino/raspi-zero etc projects. material if you platform is used in direct sunlight, don't use PLA, as it will…
JST SM panel connectors for 1.5-2mm deep panels. Cutouts for 2-10 pins included.
Description This case is designed to house a Wemos D1 Mini and a JSN-SR04T ultrasonic distance sensor. It’s ideal for use with ESPHome and Home Assistant to measure distances, such as monitoring the level in a water tank. Design Overview…
As original, this allows the user to quickly and easily depin up to a 15 pin JST-XH connector.
JST Plug and Chassis-Socket Turn your JST connectors into a plug and Chassis-socket. Included are parts for 2- to 6-pins connectors. Chassis-plate: Press the female part into the back (the not flat side) of the chassis-plate. It is a very…
I needed to install the 4 Trident bed fans from https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/CannedBass/Trident_Bed_Fans and needed a way to connect them nicely. Since I don't like using Wago connectors for such…
Pliers specialized in removing JST connectors commonly broken all across 3D printers. This tool allows proper removal without snapping wires. Improved with a thin fastener so they don't come apart, simply apply a dab of superglue on the…
From original version I changed pitch, now 2.5mm, and some other measures. It's smaller and faster to print compared to previous version I posted. Usage: Insert connector press, release and pull wires N.B. I suggest to add a support as in…
Just use : 4 JST XH male 2 pins 8 x 40 mm cables some heat-shrinkable sleeve 2 x m3 T-nut (hammered also) 2 x m3 screw (lengh 8 to 10/12 mm depending if using cover or not) Just have to solder cables to jst and secure it with some…
Tweezers to safely remove JST XH type connectors. New narrow tips to slide in between rows of connectors like limit switches etc. Designed for XH 2.5mm but I'm sure it will work with most common printer plugs. Original 5.5mm height and…
Perfect for connecting two fans to one wire.
Easy Wallmount for Einhell TE-JS 18 Jigsaw. Maybe also for other ones.
A Deckmate compatible adapter for mounting Deckmate accessories onto the ModCase. Download the .STEP file to create your own accessory.
Thanks To SnappyFPV Just a Remix for 2s 3s 4s 5s & 6s JST-XH balance connectors. I didn't test them all please let me know if they work. Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 100 Category:…
Here is a universal mount for a Jsaux Mod case, can be used to mount a power bank, external ssd etc. I just use double sided tape and it works great! I recommend at least 6 walls and 15% infill. Petg is recommended.
I ended up re-modeling this adapter to 75mm x 75mm only and moving the VESA mount down to give clearance to the Display Port cable. Made to fit hardware and allow final mount assembling after monitor is reassembled. It is a tight and…
A VESA Mount Adapter for securing the Steam Deck to a VESA Mount. Download the .STEP file to create your own accessory.
I liked revnull's idea to add a connector inside the chamber of the V0.1 so I decided to make fitment a little better and create a 3 pin version as well. There should be a slight friction fit with this print and I would still suggest…
Remix from a Wall mount on Thingiverse from the User mpuromaki , which didn't fit for the R18JS Jigsaw, so i stretcht it in the right direction
jst connector pliers that don't require glue and use a snap-in M3 hex nut with an M3 through screw (M3x12 pictured). Only the remixed side of the pliers is included here, see JST Connector Pliers (remixed) for the other half and printing…
Tip/Donate Remix from the awesome model from https://www.thingiverse.com/ssulti - Thank you! Added a small bracket/rail in the back to allow for the attaching of the HB1101 JSAUX dock. The rail is a tight fit, you may want to sand or trim…
My Jsaux modcase's stand became sad and loose, and I haven't even had it for a year, so I scoured Printables for the files I needed to combine, and voila! A replacement stand!
This phone mount is made for people who have the JSAUX grip/case on their steam deck and use a phone that is magsafe compatible. I printed it on its side, and you'll need support. To finish the project, you'll need a specific magsafe ring…
JST XH 3D-Printed Connector for 4S Battery The JST XH 3D-printed connector is a fully functional component designed for 4S batteries. Its dimensions are carefully crafted to push the limits of 3D printing capabilities while ensuring…
This is the 3D Modeling ToolKit for JSAUX ModCase of ASUS ROG Ally X. You can design accessories for ModCase of ROG Ally X. The mount structure of Ally X one share the same design of Steam Deck one. So you can basically use the existing…
I tried several JST adapter models for connecting BLTouch sensor to an Ender 3v2 board. This model prints easy and works great. I believe you could terminate this “properly” but I simply used super glue: >Remove plastic ends from dupont…
The Wall Mount for the Steam Deck ModCase is designed to securely hold your Steam Deck on any wall surface. It provides a sleek and space-saving solution, keeping your device easily accessible and off your desk. The mount is sturdy, easy…
An adapter to use deckmate accessories with the JSAUX ModCase
I started with one of the old blueberry badge holders they gave to government employees. Modified with a bottle opener on one side. Added added the JSF F35 logo to the center. Holds 4 badges, two each side. Can use vertical or horizontal.…
Say hello to our latest HB0609! The HB0609 will be shipped together with a DOCK BASE compatible with ROG Ally X, ROG Ally, Steam Deck, Steam Deck OLED, and Legion Go handhelds. The HB0609 features a replaceable acrylic sheet where you can…
Once again, a clear note: Do not install these additional LED strips directly on the connection where the original LED strip is connected! The current requirement is too high and you will at least damage the front panel board! v2 (update…
I was building another Voron and wanted some JST splitters to make connecting things like the bed fans, electronics bay fans, and some additional sensors a little easier. It can mount anywhere on 20 series extrusions with a couple m3…
My version of the JSAUX ModCase has 3 plastic tabs on each side for the stand mount so the original version of this does not fit. My guess is that i have a newer revison of the ModCase that made the original design not fit. so i made a…
Easy way to transform your Dupont cables for JST XH 2.54mm sockets. Print in PLA or PETG. No support needed. Freecad file is included.
'64' style O-scale model railroad box car Print instructions Should be printable using any common filament. Please see complete build instructions at: https://web1.letis.com/modelrr/64boxcar.pdf
I remixed original model because of the impossibility I had to close sleeves without breaking tabs. This version comes with reinforced tabs and some chamfer to easily close sleeves. Fusion360 project attached, only change ‘Pins’ variable…
A replacement component for the universal kickstand to replace the original kickstand on the ModCase. Mounting a hard drive is just one option; the hard drive or other accessories can be fixed using 3M VHB tape or Magsafe Magnetic rings.…
This is a collection of models related to the JSAUX Modcase for the Steam Deck. Their intended use is to be imported into a CAD project, so you can build compatible accessories around them <3. JSAUX has released an official set of models…
