Kabel Clip
Wall Line Count: 4 Size: 60x20x25mm 4mm Screw (4.5 Screwhole) no Supports works with PLA an PETG
- Pobrania
- 1622
- Polubienia
- 74
- Ocena
- 5
1199 modeli
Wall Line Count: 4 Size: 60x20x25mm 4mm Screw (4.5 Screwhole) no Supports works with PLA an PETG
über likes makes und follower würde ich mich sehr freuen, Peace MazZe I would be very happy about likes makes and followers, Peace MazZe
I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…
Rámeček má vnitřní rozměry 28.6x73.8mm. Na adaptér se nasadí snadno a nehne se. Otvory na kabel jsou užší a ze začátku jde kabel do nich ztuha, ale časem se “ojedou” a kabel nevypadává. edit 23.7.2023: Nahrál jsem další dvě verze, kde…
I was annoyed that my Festool vacuum cleaner has no clip for the cable. So I designed this cable holder in Fusion360 and printed it on my MK3S+. I use PETG for it and 30% infill.
Bezšroubková verze držáku kabelu k servu osy X. Stačí nacvaknout a přichytit kabel stahovací páskou i s límcem kabelu. Materiál Prusament PETG, 100% výplň, rozlišení 0,2, podpory na tiskové podložce.
Wandhalterung für Verlängerungskabel oder Schlauch. Kurze und Lange Version. Wird ohne Support stehend gedruckt. Befestigungslöcher haben 6mm.
Um die empfindliche Verbindung von Kabel und Stecker am Schrittmotor zu schützen, habe ich diesen Winkel entwickelt, Er besteht aus drei Teilen, gedruckt in PETG 100% Infill, Teile werden mit Sekundekleber verbunden. *******************…
Bitte nehmt an einer Abstimmung teil, damit ich abschätzen kann, wieviel Aufwand ich in meine Beschreibungen einbringen sollte.: https://www.pww2.com/abstimmung Ich habe die PV Anlage von der Firma Kleines Kraftwerk gekauft. Das sind 4…
The characteristics of my model: fixable on the desk with a clamp or weight it lower and better accessible, better for me to work better wire alignment, because of two clamps the model is for diameter up to 1,8mm scale 170% (like in the…
Hello friends from all over the world :) This is my first 3D-model on printables. A friend of mine has the original Prusa enclosure for his mk3s+. With the air filtration system and the LED strip, there are a few wires to guide along…
The 3-way charging cable table mount let you optimize your office table space. Due to the table mount you have quick ans easy access to your charging cables without looking for them under your table. Attention: If you print the table…
for English see below Bisher habe ich Lautsprecherkabel und Netzwerkkabel aus dem Bühnenbau auf Kartonagen gewickelt. Jeder kennt wahrscheinlich das resultierende Problem: es entstehen Kabelschlingen, je länger das Kabel umso schlimmer.…
Wandhalter für Kabel und Schläuche in verschiedenen Größen (50x50, 80x80 und 50x80) und mit verschiedenen Befestigungsbohrungen (Version X.0 mit Flachsenkungen (z.B für Linsenkopfschrauben) und die Version X.1 mit Kegelsenkungen (z.B. für…
Před tiskem čti PDF soubor /výkres !!!!!!!!!!!
If you need to mount a RJ45 Cable including Connector, you can use this wall mount. Drill a Hole big enough for your Connector and mount it using this wall mount. printed in PETG Layerheight 0,2mm, Nozzle 0,4mm
Kabelschutz Der Kabelschutz schützt das Kabel vor abknicken an den Enden. Dadurch wird die Lebensdauer des Kabels verlängert.
Model kabelové šachty s oddělanými dlaždicemi
[EN] Cable grommet for Schnaider Unica series frames. To assemble, you need to supply 45mm of stripped wire with a cross section of 2.5mm, or two M2 screws as hinges. It is then inserted into the frame between the metal insert and the…
Ich habe die Halterung um 90° zu den von PRUSA gedreht, damit die Führungen besser an einander vorbei kommen. Zusätzlicher Halter für 4+6 mm PTFE-Führung für Soft TPU Drucke. Bei Soft TPU unter 85A ist der Widerstand in den langen PTFE…
Hierbei handelt es sich um einen Remix des Models von rtarbutton (dickes Dankeschön ;-) ) mit dem Namen “ LTT Magnetic Cable Arches ”. Die Gründe des Remixes waren Die Konfigurierbarkeit der Magnetkraft durch den Einsatz verschiedener…
hey um die label in der schublade zu organisieren ein einfacher Kabelwickler, hab spass beim drucken Hey to organize the label in the drawer a simple cable organizer, have fun printing
Der Kabelwickler V2 ist für längere und dickere Kabel gedruckt mit 15 % Infill und einer 0,4 Nozzel über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Zur Beschriftung von 5l Benzinkanistern Mit Stopp bei 0,6mm zum Filamentwechsel
Ich brauchte auf der Baustelle eine einfachen abdeckung für den Kabelauslass aus der decke somit ist dieses Model entstanden. 10 x 10 cm groß 3,5 cm hoch über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Netzwerkkabel lassen sich Platzsparend aufwickeln und aufbewahren. Verlegte Kabel sind oft zu lang und sind schwer irgendwo zu “verstecken”. Mit dieser Kabelrolle lässt sich die überschüssige Kabellänge bequem auf wickeln, mit den…
Da wir das Gerät nur bei Gebrauch aufstellen, nervte mich auf Dauer das Kabel. Ich habe eine einfach anzusteckende “Kabeltrommel” entworfen, damit endlich Ordnung bei Nichtgebrauch entsteht.
Ceiling light cable cap. Cable diameter 6mm, diameter 70mm height 96mm. Fixing bolt included. Krytka kabelů stropního světla, průměr otvoru pro vodič 6mm, celkové rozměry 70x96mm. Šroub pro zajištění je součástí modelu.
Ich beschreibe hier eine parametrisch anpassbare Hohlraum Kabeldurchführung am Beispiel eines Homematic Leistungssensors Der Leistungssensor von Homematic IP wird an eine Moderne Messeinrichtung IMEI angeclippt. Wenn diese jedoch in einem…
PG21 threaded blind stuffing to close unused PG21-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Eine Abdeckung für einen 22x10 Kabelkanal
Ich habe mir diesen Halter konstruiert um meine Kabel besser verlegen zu können. Da an meinem Flexispot diverse möglichkeiten sind solche Halter anzubringen, wurden als erstes 2 verschiedene desinged. Hauptgrund war eine gute Verlegung…
Ein einfacher “print in place” Kabelkanal in verschienden Größen mit Schanier A simple "print in place" cable duct in various sizes with hinge
Praktisch zum schließen und öffnen mit Spiegel-Klebeband auf glatten Flächen zu befästigen.
Der Verschlussstopen dient dazu, die Bodenöffnung bei einem Frankia Platin so zu verschließen, dass eine Kabeldurchführung für ein 3 x 2,5 qmm - Kabel möglich ist. In der zweiten Version ist zeitgleich die Durchführung des…
Es können 3 Kabel in der Halterung geführt werden. Die Halterung ist für eine Tischdicke von 35mm ausgelegt. Weitere Größen auf Anfrage. Ich führe in der Halterung 2 Displayportkabel und 1 USB Verlängerungskabel um meinen Laptop…
Kabeldurchführung für 50mm Bohrungsdurchmesser für Wände bis 170mm Dicke. Ist ohne spielraum Erstellt, so das es ohne Kleben hält. Cable duct for 50mm hole diameter for walls up to 170mm thick. Is created without any clearance so that it…
Ein aus mehreren Teilen bestehender Kabelkanal. Dieser kann auch individuell auf Ihre Bedürfnisse angepasst werden. Schreiben Sie uns einfach eine Email mit Ihren Maßen.
Zavěšení konce prodlužovacího kabelu z PLA na 20% otvor 41x54 mm hák pro šířku 20 mm
Es gibt so viele Kabel in dem Haus in dem ich wohne, dass ich jedesmal von neuem anfange das richtige Kabel zu suchen. Markierungen mit Klebeband oder Stift vergehen mit der Zeit oder sind so unleserlich, dass ich dann doch wieder anfange…
Nagelschelle, um bis zu 3 parallel verlaufende Kabel anzubringen.
Print Settings (slicing in PrusaSlicer): Layer height 0.15mm (0.2 is possible too, but 0.15 is nicer) – specifically I use 0.15 BALANCED. Nozzle is standard 0.4mm but it doesn't matter. Material PLA. Infill is also basically irrelevant (I…
PG21 threaded blind stuffing to close unused PG21-openings in housings. Adapter for 1xPG7 cable gland for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffing with PG7-thread. [1] Thread types: PG thread…
PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-3)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
##German Version / Deutsche Version:# Nachdem ich meine Satellitenschüssel vom Dach des Wohnmobils entfernt hatte, hatte ich eine offene Kabeldurchführung. Der provisorische Verschluss war keine Augenweide, also: kurz vermessen: 80mm…
Zum befestigen von Stromkabeln. In unterschiedlichen Breiten
Hab hier einen Einschub für eine HT Rohr halter. Die ¾ Kreise haben ein Durchmesser von 10mm und 30mm ich hoffe jemand hilft es vielleicht :)
My version is 15 mm longer with a slightly raised back side so that the cable does not rub against any edge of the printer structure during printing. It has raised edges of the cable guide groove to prevent jump out during printing. The…
for English, see below Zugegebenermaßen ist dies ein sehr einfaches Modell. Wesentlich ist jedoch die Idee dahinter, das Netzteil (außerhalb des LACK Gehäuses) über 2 PC MOLEX Stecker Leitungen mit dem MK3/MK4 zu verbinden. Die beiden…
Beim Vorwerkstaubsauger der älteren Art sind die oberen Kabelhalter oft nicht mehr die Besten, sie lassen sich aber mit dem Modell erneuern
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-4)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Kabelführung unter Tisch M3
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-6)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
Úchytka kabelu na rameno mikrofonního stojanu BESPECO SH13NE.
Chytka kabelu do průměru 10mm. Ideálně pro našroubování nebo přitlučení do stěny.
Kabelführung befestigt durch Doppelseitiger Klebstoff. Kabel wird durch Kabelbinder fixiert.
PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-7)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…
I needed a junction box to hold a small 5V PSU-Board as well as a Relais-PCB within an REV-Ritter cable duct. Here is an qick model for that. It can be fixated wihin the duct with the two T-Screws. I left some space on the bottom of the…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Úchytka kabelu k lampám Napako a Lidokov. Použití pro stolní lampy s tyčovým ramenem v průměru 8mm a pro kabely s průřezem 6-7mm.
věšák na prodlužky, USB a LAN kabely. 3 v jednom.
cable holder diameter 7 and tube diameter 38 (držák kabelu na trubku)
Nemusí pasovat pro všechny modely, vyráběno původně pro Sennheiser PC 310. Tiskni na bok, model s držákem kabelu s podporou.
Die Beschreibung dieses Deckel Set richtet sich vor allem an diejenigen, die das u.a. bei Amazon erhältliche “ Brandsseller Aufbewahrungsbox Dekobox - Rattan-Optik - 3er-Set schwarz” (Link: https://amzn.to/3VxbGMG ) bereits besitzen. Ich…
EN: Since the relatively delicate cable clip on my electric lawn mower often broke, I scanned one that had been glued together using a normal flatbed scanner and made myself a wider, more stable version. Since I wanted to spend as little…
Kabelclip für das DIY Autodarts Set von Robbel. Ich wollte den Stecker von meinem LED Strip nicht umlöten weshalb ich mir diesen kleinen Clip erstellt habe.
Eine Box die die Kabel meiner Fußbodenheizung aufnimmt. Hält durch 8 kleine Magnete. Mit Epoxy eingeklebt. A box that holds the cables from my underfloor heating. Holds with 8 small magnets. Glued in with epoxy. Neodymagnete 6 x 2mm…
Halter für Kabel zum anschrauben oder ankleben. Fürs anschrauben wird eine Senkkopfschraube benötigt. Cable holder for screwing or gluing. A countersunk screw is required for screwing.
Hallo du Macher, ich habe hier eins der praktischsten Drucke die ich bisher für meinen Weinsberg CaraLife Van konstruiert habe. Mit dieser kleinen Klammer kann man kinderleicht Kabel oder kleinere Sachen an das Nutschienensystem des Vans…
Durch diesen Druck kann man Kabel an der Wand befestigen
držák kabelu proti samovolnému odmotávání z cívky , možno zajistit kabel/kabel , nebo kabel/ stěna cívky.
Zavěšení konce prodlužovacího kabelu z PLA na 20% otvor 40x47mm hák pro šířku 20 mm
Otočná kabelová průchodka na mixér ETA Promise 1046, ale asi i na jiné.
Hier wurde ein Kabelhalter für Einzelader-Stromkabel konstruiert und gedruckt, die die Standardhalter im Schwenkbereich der Tür zu hoch aufbauten. Vielleicht kann ja noch jemand so einen Halter brauchen. Es werden noch folgende Kaufteile…
Ich musste durch meinen Kaltkeller ein Kabellehrrohr entlang der Decke legen. Diese ist allerdings mit mehreren Zentimetern Styropor gedämmt. Dies ist eine einfache Platte, um den Druck der Klemme besser auf das umgebende Styropor zu…
I wanted to make giant numbers using the lighting string cable. There were however no clips to fasten the light sockets to a board. These clips fit perfectly on the lamps, and secure the lamp on the board. Two clips are needed for each…
Wickelelement verschraubbar an welchem Kabel / Drähte mit Kabelbindern fixiert werden können
Following the creation of my Webcam Mount ( https://www.printables.com/model/1353224-magnetic-webcam-mount-for-core-one ) and mounting the Raspberry Pi on the side of my Core One, i wanted to tidy up the cables a bit. Here is the result.…
Jednoduchý držák kabelu k žebríkovému topení. Účel je zřejmý - aby se „neválel“ po zemi. --- A simple cable holder for ladder heating. The purpose is obvious - to prevent it from "rolling" on the ground.
Während des Umbaus unseres Wohnzimmers, wollten wir die störenden Kabel des aufgehängten Fernsehers in der Wand verschwinden lassen. Dafür haben wir in die Wand geschlitzt und ein DN50 Rohr eingeputzt. Für die Kabelführung dient diese…
Držák kabelu pro Průša MK3S. (mám na MK3,5 :-) )
Info k tisku: Výplň 100%, kvalita 0,10 mm FAST DETAIL. Při tisku z PLA bez límce, při tisku z PETG nutný límec.
Mit dem M30 Kurzbolzenadapter können Sie formschöne T-Stoß-Übergänge von runden Querschnitten auf M30 Gewinde machen!
Soubor modelů obsahuje: Stohovací polička pro hromadné nabíjení tabletů iPad 10,9" (originální kabel Apple se vkládá během tisku). Pro jiný kabel bude nutné model upravit. Stojánek na 30 ks Apple pencil podložka pro hromadné nabíjení 10…
Object description: This wire stripper is as the title says, a tool which cuts in the outer insulation of a cable that you can easily peel it off. I made the experience that a lot of professional tools work with a spring mechanism and cut…
Simple cable ties to print yourself. Created for the last meter contest on Printables.com. The cable ties are surprisingly stable and also flexible enough when printed with PLA, but you should switch to PETG or TPU if you want to put a…
I want to install a reasonable cable management in my 3D printing cabinet. What is closer than the channels to print. Sneakypoo was so friendly to design one that I just had to enlarge. The STL files are not completely bug free so only…
Easy printable Cable organizer clip for desk! With mounting holes and/or double-sided tape mating. You will find different sized for 3x/ 5x/ 7x/ 10x Cables. Happy Printing😁👍
Ikea skadis Storage box for Zip Ties / Kabelbinder. Box inner-height: 12cm, 15cm, 18cm, 20cm On the pictures you can see Version 1. Version 2 comes with rounder edges to improve stability. I printed mine with a 0.6 nozzle and 0.4 Layer…
This is a simple Flex Cable Zip Tie Design, inspired by the original Design from Extrutim | Printables.com The original design was too thick for me and also the mechanism did not work properly for me. I have uploaded 3 different lengths,…
Additional holder for short PTFE guide for Soft TPU prints. With Soft TPU below 85A, the resistance in the long PTFE guides is so stong that the filament cannot be conveyed. With approx. 2 cm long PTFE guides on each clip, problem-free…
Ein Kabelkanal zum ankleben, mit doppelseitigem Klebeband oder Heißkleber. Die zweite Variante kann mit 3mm Schrauben befestigt werden. Das Modell ist 20 cm Lang kann aber im Slicer auf eine beliebige Größe skaliert werden Ein Tipp die…
Wandhalterung für ein Wallbox Ladekabel mit Typ 2 Stecker. Das untere Loch ist von den Maßen her so erstellt, dass man mit der “Nuss” einer Knarre hineinkommt. Fotos werde ich noch einstellen.