2747 modeli
This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The Replaceable Single Edged Curved Blade Version is available to my Clubs members. Supports…
Wydruk około 10,75 €–13,14 € nettoWstępna wycena jednego wariantu
This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Wydruk około 5,42 €–6,63 € nettoWstępna wycena jednego wariantu
This is a katana for Dummy 13. It is about 90mm long and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out this remix done by DrunkenGlitchy for a more well defined guard!…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
Are you a skater? You will like it. It's very simple and rad! If you like this model, a coffee helps me stay balanced - both on the board and while modeling ☕ 👉 buymeacoffee.com/nexl Thanks for the support 🙏 Print instructions Material:…
Wydruk około 3,23 €–3,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Need a ride? Why not Fingerboard... An Open Source Project - Fusion360 File Available! Print instructions Print, Peel, Snap and Play PS: Model toy in the G-code is 86% scale of .stl model files.
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
The 21 Cup Rubbermaid containers are getting harder to find and usually more expensive. Here is another great option from the community. https://www.printables.com/model/952313-filament-dry-box-with-rollers This is a spool skate that fits…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My cats love playing with these! Print Settings Printer Brand: Prusa Printer: MINI+ Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Any PLA/PLA+ Notes: Use Brims Category: Pets
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Two hooks to mount a skateboard to the wall. Fits skateboards with a wheel diameter of up to 54mm. Print instructions 0,2 mil quality setting, no support, no brim
Wydruk około 6,08 €–7,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These skateboard riser pads will elevate your skateboard deck by 1/8 inch and therefore there will be less wheel bites. Wheel bites can occur if the space between your skateboard deck and your wheels is too small. So if you take a sharp…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Easy small Skateboard Holder for the display of your Skateboards, made for a friend. For the 0.4mm nozzle, I personally use 0.2mm layers and 99% gyroid infill - from what I read and watched, it should provide the best integrity and part…
Wydruk około 5,93 €–7,25 € nettoWstępna wycena jednego wariantu
Put the Blades (Biggest → smallest) in the “opening”. Close the “opening” with the cover with Glue The individual Blades might get stuck inside of the other, but can be pushed back in the Handle with a little bit of Force.
Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu
The mount consists of two separate hangers as you can see in the pictures. They take every standard skateboard truck and also every longboard truck I tested with (Paris, Caliber) and every wheel size from park skate wheels to 90mm…
Wydruk około 1,66 €–2,02 € nettoWstępna wycena jednego wariantu
This is my latest shape for a professional Fingerboard. Print instructions i would suggest to print it in PLA lying on the side of the board with support material on build plate
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Hook that attaches to the handle of the bag to carry your skateboard on your back. The model is designed for an Eastpak floid bag but adapts well to other bags. I suggest printing the part vertically to optimize resistance to layer…
Wydruk około 1,58 €–1,94 € nettoWstępna wycena jednego wariantu
Silicate Canister for storing silicate balls, for absorbing humidity. V2 is specifically designed in vase mode to reduce time and material.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
The two main parts are printed in PETG with an infill density of 65% to ensure sufficient hardness and robustness. A tolerance of 0.15mm was added to the letters to fit and hold without anything else. They are printed in PLA with 100%…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Skateboard hanger combined Hi. This is my first Fusion 360 design. I've found this amazing Skate hangers from @Maker81 (https://www.printables.com/model/128064-skateboard-wall-mount-wandhalter) and used it for my sons skateboard. But…
Wydruk około 11,47 €–14,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Some roller skates for Lucky 13 to make his life even more sportive…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EMO robot skateboard Let's be honest… EMO needs another skateboard he can ride on! =) I am pretty sure: When I don't look at him he is practicing some new tricks… ;-) EMO will hold (a little bit) on to the board with 2x neodym magnets…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Show off your deck's artwork - holds deck ~2.25" from wall to clear shaped decks. #10 screw to mount board. Can be mounted horizontal or vertically, with or without trucks attached. Has 6 mounting holes for old-school or new-school truck…
Wydruk około 5,46 €–6,67 € nettoWstępna wycena jednego wariantu
Continuing with my Mandalorian Funko style coasters, here's Bo-Katan! The color layer changes are a little tricky here, so use the included gcode file, or refer to the uploaded picture for where to change colors. Happy printing and this…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
Simple aber effektive Katzenklappe für ein Fliegengitter an der Terassentüre. So kann die Katze im Sommer, wenn die Terassentüre offen ist, problemlos rein und raus, ohne dass das Fliegengitter im Weg ist. Einfach mit PLA drucken und dann…
Wydruk około 2,67 €–3,26 € nettoWstępna wycena jednego wariantu
i will glue this to the wall, no holes Print instructions i printed this for my koowheel longboard, i glued this part to the wall 1 year had past, and it dit not let go.
Wydruk około 7,26 €–8,87 € nettoWstępna wycena jednego wariantu
Design These are designed to be compatible with the official Kato N gauge diorama kits 28-889 Kato UniTrack Diorama R183 & 28-888 Kato UniTrack Diorama S124 Straight Kit As used in the Kato Dioramacircus. These models offer support for…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
Inspired by: https://www.printables.com/model/121432-e-paper-display-tap-handle https://www.printables.com/model/268334-eink-tap-handle
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
Hiermit drucken Sie einen Brillenständer im Katzendesign aus. Sinn und Zweck ergeben sich aus den Fotos. Die farbigen Bilder stammen von BlocksCAD, mit dem ich das Objekt erstellt habe. Ich habe einen weiteren Ständer entworfen:…
Wydruk około 4,19 €–5,12 € nettoWstępna wycena jednego wariantu
Hacksaw Katana Handle for conventional hacksaw blade. A hacksaw cannot cut more than the width of the frame, but with a side handle, it can cut as long as a saw. The hacksaw blade will break if pushed too hard, but if used with care, it…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
This case is used to store Bauer Hockey Skates runners. It can also be used for other models of runners like CCM, although True's runners won't fit. Checkout my other models for the TRUE model.
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
A historic Sikh Weapon Katar Push Dagger designed in Fusion 360 not an accurate model with the rounded handles, just a simple extrusion of the 2D outline will work on this in more finer detail in the near future
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Um zu erkennen ob die Radschrauben meines Wohnwagens sich gelockert haben bzw. gelockert wurden habe ich diese Indikatoren designed. Mit der Hilfe sieht man auf den ersten Blick ob mit den Radschrauben alles in Ordnung ist. Die…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Maneki-neko ohne Funktion
Wydruk około 3,22 €–3,93 € nettoWstępna wycena jednego wariantu
/* Note: because this product does not seem to be available in the US the description is only in german */ Das ist ein Griff für den Littycat Mülleimer für Katzenstreu. Da ich den Mülleimer zwischen zwei Katzentoiletten hin und hertragen…
Wydruk około 4,50 €–5,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
This coat of arms of the city of Katowice was designed as a tactile graphics for blind people, but can obviously find far more applications. How to print No rafts or supports needed. Print in any scale.
Wydruk około 11,98 €–14,64 € nettoWstępna wycena jednego wariantu
I have printed two of them, one that fits in my mobile toolbox, the other in the drawer of my workbench. That way, those guides are always where I expect them to be, I know exactly how to position them on my work piece even without…
Wydruk około 3,04 €–3,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based off of the Umbrella Cockatoo and sculpted the head/beak in Blender. I modeled the cylinder and the feathers in Fusion 360. This took me about 7 hours to make everything. I added the AMF file so you can use my raft/support settings…
Wydruk około 4,80 €–5,86 € nettoWstępna wycena jednego wariantu
Pedagogové mateřské školy vytvoří, edukativní stavebnici, kterou děti samy poskládají tak, aby ozubená kolečka do sebe zapadala a utvořila funkční stroj.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
When you build a bambo katana for your kids... you need a stand too.
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
This case is used to store True Hockey Skates runners. It can also be used for other models of runners, like bauer, although I have also made another smaller case for the bauer ones, since the True model is much wider. Checkout my other…
Wydruk około 1,88 €–2,29 € nettoWstępna wycena jednego wariantu
Eine weitere Möglichkeit den wunderbaren Frostpendeln Sticker am Rad zu befestigen. Zur Montage werden 2 Stück M3*10 Schrauben und 2 Stück M3 Muttern benötigt. (Für besseren Halt 2 Stück M3*12 , 4 Stück M3 Unterlegscheiben und 2 Stück M3…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
inspired by Lucky Fox labs
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
This is a backer for the Ultimate Picture Frame (UPF) by Kat Creates. The UPF is a fantastic project that enables you to build picture frames of any size. Learn more here: https://katzcreates.com/ultimate-picture-frame-shop Faye offers…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
100x160mm sign, advertising ACME Rocket Skates, as seen in cartoons. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see the…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
Printed with PLA, on 0,2mm layer on MK4 + MMU3 (won't be needed, also uploaded code for regular MK4 with Input Shaper)
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Beschreibung Das Modell der ehemaligen katholischen Kirche „Zum kostbaren Blut“ (Rheinstraße 8, 35684 Dillenburg – Frohnhausen) ist das fünfte einer Reihe von Modellen profanierter, umgebauter, umgewidmeter oder abgerissener Kirchen der…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
I designed this small, Gogo's-style skater boy figurine using AI to help process the reference pictures. The original model is large-scale, so I printed it at half-size, resulting in a total Z-height of 56 mm. It definitely needs organic…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
katana s desingem Naruto
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…
Original Model by Mr_Andre https://**********.com/en/models/1033319-stainless-katana-sword-print-in-place#profileId-1016589 Design Concept This red column features a unique stackable design that can serve as an intriguing display piece or…
This remix of the original Banana Katana introduces significant improvements for enhanced functionality and stability. The original Banana Katana model features a banana that unfolds into a long sword. In this remix, the model has been…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This is an evolution of my original Collapsible Katana design with a some improvements: The kissaki is now included as part of the innermost sword section, which means no assembly is required to print it. This results in a much cleaner…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
A remix of 3D Printing World 's Collapsing Katana except I removed the robot logo on the bottom of the katana.
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Das Katana ist insgesamt ca. 910mm Lang und der Griff ist ca. 210cm hoch. Wenn ihnen das Modell gefällt bitte nominieren. Veröffentlichen, verteilen,…
Infill, 20% a new version https://www.printables.com/model/752394-dummy-13-katana-holster-v2 holster v1 and v2 require minimal support V3 requires no supports
This version of the single edge curved blade collapsing katana prints in place all as one part. The Replaceable Blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
katana s desingem the witcher na hraní či na dekoraci
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
Update 23. Dec. 2023: Problems in the Cura Slicer have been fixed Update 11.Nov.2023: Added additional parts and variant + Katana Based on DUMMY 13 Beta - Oct. 2023 Get your Dummy 13 here: /model/593185 I designed this part to create…
Eine süße Katzen-Mini-Kollektion mit vier verschiedenen Posen. Bitte aktivieren Sie die Stützen beim Druck, da diese Katzen sie benötigen. Die Figuren sind in unterschiedlichen Posen gestaltet. Unterstützung erwünscht Ich freue mich über…
For little makers. Need some magnets and glue. Second thx soap warrior! Category: Toys & Games
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Modified blade to be thicker With the original blade model, the blade pieces kept breaking whenever I swish-flicked it open because of how thin the walls were, both in PLA and PETG. So I increased the width of the walls of the blade…
katana bez loga
This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…
A simple bookmark that shows the famous katana on the outer face and which uses a fin to separate a book's pages. An easy, fast print. The bookmark works best on paperbacks but it can also accommodate hardcovers by simply pulling the…
A bookmark is always useful and this one is ideal for the last few meters. Another bookmark: https://www.printables.com/model/349162-koala-bookmark
There is two versions of this katana. The first (v1) use one 5mm metal rod to solidify the blade, the second (v2) use two 3mm metal rods. There is two versions of the scabbard. The difference is the position of the kurikata (the little…
Wanted to make some probably decently proportionate katanas.
Check out the new V2 too :) https://www.printables.com/model/692209-robust-finger-skateboard-v2-durable-rollable-fully/files Board 1: WIth Chamfer Board 2: With radius Printing Instructions: Print the axis massive with as many perimeter…
'Tis the season, Die Hard fans… Welcome to the Nakatomi Plaza building! *TRY WITHOUT SUPPORTS FIRST* - experience has shown that it prints cleaner than with supports, and also avoids the difficult removal, where the pillars may break.…
Title says it all. I've optimized the size for the bed of the Prusa Mk3. As it was too big at first, I made it modular for printing at the maximum size. I've also included a smaller one that can be printed in one go. The legs and body are…
2 Katanas and a holster
Sword stand for Japanese Katana. Holds a single sword. Printed with Proto-Pasta “Empire Strikes Metallic Black” HTPLA. Everything just snaps together, no glue or screws required. Tolerances are tight, so some very light sanding might be…
Deadpool Collapsing Katana (Print in Place)
This is an old version. You can find the updated version here . Introduction I'm Seb, I'm a student and I've been working on the idea of 3D printing a skateboard for more than 2 years. The goal was to print both the trucks and the board…
Fingerboarding is so much fun, this project allows you to print a modular skatepark. All models are made with 3d printing mind so no small features or difficult overhangs. All parts are compatible with each other. Combine and mix…
Is now tighter
Model of the Mandalorian Kom'rk class (Mark 3) spaceship from the Mandalorian. https://starwars.fandom.com/wiki/Kom%27rk-class_fighter/transport The Wings can be rotated and folded. For the folding mechanism its important to print two…
I have designed these PS5 skates for a buddy of mine. He was super happy about them so I am assuming they fit well enough
Le adapte vanas ruedas a los pies del DUMMY 13 unas ruedas
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Okuyasu used Za Hando to remove most of Josuke's body! A meme of Josuke from part 4 of Jojo's Bizarre Adventures.
I like the original katana for lucky but the guard felt lacking to me so I model up a quick guard and edited the origin i printed this with the normal printing settings as lucky 13 (super glue required when putting the guard on)
Give it a “like” and a download, so I can get those sweet sweet Prusameters :) --- This is a simple and effective wall hook for hanging skateboards or scooters on the wall, such as in a garage. I printed a few, and realized I could also…
For optimal results, print the model using a 0.4 mm nozzle. Almost all parts can be printed "in-place" (as a single piece) without support structures—only the lid needs to be attached afterwards. All blades are fully interchangeable. I…
this is a wall mount for katana and wakizashi (the little sword on the top). I decided to make this support because the swords are bulky on my desk. the screws that you need are 4 M3
Once we hit 70 followers, a new 3D model will be released!
Make your keys prettier with this Akatsuki keychain
I split the katana and blade so that you can have the blade and handle different colours. Print instructions Print the blade first in the color of your choice. When slicing the Handle, add a "Color Change" in PrusaSlicer at 180mm just…
