Klingon Symbol
Need a backing for a Star Trek Item? Stick this behind it.
- Pobrania
- 51
- Polubienia
- 6
- Ocena
- 0
Liczymy pasujące modele…
Need a backing for a Star Trek Item? Stick this behind it.
Here is a fun and easy to make Klingon d'k tahg knife from Star Trek. Features side blades that open using a simple slide lever on the back. Update February 11 2023 - Added an alternate side blade with a notch cutout, as seen on DS9. It…
i cut it into easy to assemble parts and optimized it for printing
For the more skilled soldier of the empire, the mek'leth favors skills of speed and dexterity over strength. Designed in Fusion360 (this was a new type of designing for me and I am proud how it came out). I printed this in PLA with a…
Klingon Bird of Prey All the assets for this model were pulled from a video game, therefore is not my original creation Converted the game 3d files to import to freecad and then made several corrections in order to be 3d print friendly…
Here is a D'k tahg for a Klingon warrior as seen in Star Trek. It consist of three parts including the blade and two halves of the handle. It is assembled with two 6-32 screws and nuts. One side of the handle features a round counter sink…
I could not find one here so I made one. Klingon Bat'Leth right out of Star Trek. Update I really wanted a smooth surface. Well I sell doming epoxy for a living for doming name badges, jewelry and promotional items. I decided to dome the…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 45° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Klingon Bat’leth A bat'leth is a curved blade approximately 3 feet to 5 feet long, with two spiked protrusions at each end and three handholds along the back which can be used to twist and spin the blade rapidly. The bat'leth (Klingon:…
Here's my take on the TOS Klingon disruptor. There are separated disc sections that need to be arranged in the correct order, so refer to the diagram to assist. The emitter base is a thin fragile part so there are two options: one printed…
Here's an easy Klingon communicator to make. Uses 6x2mm magnets. No supports needed. Display stand included. Filaments Used PLA, CC3D Antique Gold and Prusament Galaxy Black and Silver. Buy prints of this model: Ancient Stone Inspirations…
A good friend of mine had a Star Trek Themed wedding. I decided to design a Baldric based upon the one Worf wore in TNG. It is made up primarily of the rings and loops. The loops have an opening that allows the rings to be connected to…
Today is a good day to dry!! Upgrade your bathroom with superior Klingon technology. This 24th century design upgrades your single bathroom hook to the next level in aesthetic design and functionality. It is capable of hanging at least 2…
Klingon Bird of Prey Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
Incense holder replica from DS9 - Sons of Mogh Caution - PLA is combustible, put an aluminum plate inside to prevent potential fire. Do not use unattended. Use at own risk. Version 1.1 - improved support for legs. Badge.stl is needed by…
From the Original Star Trek TV Series
Klingon Bat’leth A bat'leth is a curved blade approximately 3 feet to 5 feet long, with two spiked protrusions at each end and three handholds along the back which can be used to twist and spin the blade rapidly. The bat'leth (Klingon:…
Here's my version of the Klingon communicator prop. It's a simple model and easy to assemble. The lid has a cutout area that you need to be careful about removing the supports at. Display stand included. Update November 6 2026 - Added a…
A Klingon drinking cup to hold your Blood Wine. Profile taken from an image of one of the props used on TNG. Print, distress with a little heat and paint. Drink the blood of your enemies.
Klingon Bat'leth 2 for Dummy 13
Klingon Battle Cruiser Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning…
Klingon Bat'leth 1 for Dummy 13
Originally published here: Decahedron dice with Arabic, Roman, Braille, Draconic and Klingon numerals by tato_713 - Thingiverse This was designed for a request of making a decahedron dice with numbers from 0 to 9 for DnD playing. I later…
Wanted to make my own Klingon padd with a swappable display. Screen graphics and back label are included and I'll add more. Display stand included with DS9 and TNG options. Filament used was Prusament galaxy green PLA.
This model has been scaled down to fit the most common sized FDM printers on the market, and split into two pieces allowing easier two color prints for the bulk of printers that have only single extruders. I noticed this design appears on…
A sister class of ship to the Bortas, the K’T’inga is a Klingon battleship with huge arsenal of torpedo launchers. The main launcher is positioned right at the central section of the bow, below the bridge, giving the Captain of each…
So, I'd seen a few tree ornaments that looked pretty similar floating around here and there, but nobody had offered a download - at least, none that I found on a (very) quick search. So I decided to make my own. There's nothing special…
Klingon Mek'leth A mek'leth was a traditional Klingon bladed weapon. While Klingons often carried disruptors, they prefered to use bladed weapons in combat, with the two most common ones being the mek'leth and the bat'leth . The mek'leth…
After seeing my remix of the Star Trek Com Badge, a friend asked me for a Klingon badge. I used the same 8mm magnets (they measure about 8mm x 2.7mm). I've tried to not cut tolerances too tight. I believe I am using…
Star Trek Klingon Keycap printed with Black and Red
Mit Hilfe dieser Schablone kann man ganz einfach klingonische Schriftzeichen zu Papier bringen.
Klingon Kur’leth The kur'leth was a type of Klingon sword, similar in shape to but longer than the mek'leth , with a second grip near the tip of the main blade.
The IKS Rotarran was a Klingon Bird-of-Prey that was in service with the Klingon Defense Force in the late 24th century. The Rotarran served with distinction during the Dominion War, with General Martok using the vessel as his flagship.…
Klingon Emblem Refrigerator - Designed for Muli-material printers so you can get all the colors. Printed using a Prusa MK3 in PETG with 15% infill. Enjoy!
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
Another Solidworks model from my digital archives, this is an example model I made while I was a TA for an Engineering CAD course that I used for instructing my students. The purpose of the assignment was to design a wheel rim that would…
This my version of a Puffy Klingon D7 to go up against the Puffy Enterprise. 4/5/18 - Updated the D7 head to be more proportional and fixed the base so the Warp engines can clear the base. Original base staff was too short. While you are…
Finally got around to upgrading my d'k tahg model with a bunch of new customization options for the distinguished Klingon warrior. Update September 12 - Added stand 1 with tag option. Update August 15 - Fixed the sheaths to fit the knife…
Klingon Mek'leth 1 for Dummy 13
Just a remix of a remix!
The iconic Klingon D4 class is a tiny fighter vessel used to intercept and destroy enemies. The D4 has many common uses, such as a troop carrier for infiltration and extraction missions. Squadrons of D4 patrol the surface of Kronos as an…
Klingon D7 Battlecruiser for Minimates. DST made several versions of the Enterprise but no other ships. They made a Kor Minimate. He needs a ship to command and the Enterprise needs a counterpart to battle. The parts starting with "left"…
It's possible to print in dual color with a normal printer. At the start of 9th layer insert the GCode command for pause the print, the command depends on the firmware Klipper = PAUSE Prusa/RepRap = M601 During the pause you can inser the…
This is another version of a dog tag with Klingon symbol Instructions Best to use .35mm nozzle or smaller. .15mm layer height I made the hole a bit bigger in this model, it may look better if you make the hole a little smaller. Category:…
Klingon symbol in a dog tag. It's not the whole symbol with the circle but I will have more uploaded soon Instructions Best to print this with a .35mm nozzle or smaller. I used .15mm layer height, 2 perimeters. Category: Keychains
Klingon Mek'leth A mek'leth was a traditional Klingon bladed weapon. While Klingons often carried disruptors, they prefered to use bladed weapons in combat, with the two most common ones being the mek'leth and the bat'leth . The mek'leth…
Historically utilized by the Klingon Imperial Defense Force, the D3 class of vessel was used primarily for escort and bombardment missions up until the 2150s. It was then re-classified as an Interceptor and has since been widely adopted…
The central column of strength in the Klingon Defense Force, the Korinar class is most prevalent in the Kronos system as the eyes and ears of the Chancellor in local space. A formidable reactionary vessel, the Korinar is a strong…
Wallmount for this Object: https://www.bluebrixx.com/de/bluebrixxspecials/104584/Star-Trek-Klingon-Bird-of-Prey-BlueBrixx-Pro The V1 version of the wall bracket is for fixed mounting at a 45 degree angle to the wall. With the V2 version,…
This is the logo for the Klingon Fan Club, Ring of Fire Fleet. It is meant for costume\uniform use, but can be used for anything you wish. Print Settings Printer Brand: FlashForge Printer: Adventurer 3 Rafts: No Supports: No Resolution:…
The Jejtaj is a weapon wielded like a pair of brass knuckles. However, with enough practice, one can parry bladed attacks. (Sorry NOT alot of info on this Klingon Battle Blade)
The top part which connects to the spaceship is quite weak. I've reinforced it numerous times to the point it's almost double the width of my original design. it can't be made any bigger without ruining the style. The connector on the top…
Klingon ship - cookiecutter >> If you want to buy me a coffee, you can for any amount, I will be very grateful. << Print parameters Nozzle: 0,4 Supports: NO Material: PLA, PETG Infill: 40% Wall Count: 3 Don't forget to follow my profile…
the trefoil-like emblem that can be seen in TOS
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1YQfF7590i2
This keychain is inspired by the Klingon 'd'k tahg' featured in the Star Trek franchise. It prints in 2 identical parts which are then glued together with the aid of built in alignment pegs and holes. The 3 colour print takes approx. 1…
I created this low-detail model to print to go along with other Star Trek ships I've been printing to wargame with. The model prints pretty well at 1/5000th scale (35mm long, in real-world terms). This thing was made with Tinkercad. Edit…
Battle it out using either Starfleet Command or the Klingon Defence Force in this Star Trek version of Tic Tac Toe. Note: I have provided an alternative lid option that uses the spelling “Defense” instead of “Defence”. Both .stl & .3mf…
This is a Klingon inspired badge/thing with a custom declaration. Was printed on Geeetech A10M. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Generic PLA Gold/Silver Notes: Printed at 200% as I was using up…
Embrace your inner Klingon with this boldly designed Star Trek Klingon Dice Box , perfect for tabletop RPG players and Star Trek fans alike! Shaped like the Klingon emblem, this box holds your dice securely for travel, making it the…
KLINGON LIGHTER SLEEVE (STAR TREK TNG) FOR BIC LIGHTERS. IF YOU LIKE THIS MODEL THEN PLEASE LIKE AND SUB. THANK YOU
Created for use in Star Trek Catan board game. The bottom part functions as an "outpost" for the Klingon race. The top part upgrades to a starbase for an additional victory point. Modified model by Frank Strauss from myminifactory dot com…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5IFgZsBPld7 Print instructions Category: Props Summary This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5IFgZsBPld7
Klingon badge magnet. stop @ 14 to change color.
Made with the blood of your enemies, it adds a striking, futuristic touch to any dungeon, perfect for Star Trek fans or sci-fi enthusiasts (not for petaQ's) . Its 3D depth enhances its visual impact, making it a standout piece of decor.…
From the Axanar Star trek Fan Film Universe the Kingon D6 Battlecruiser in 1 to 1000 Scale to fit to the Polar Lights 1 to 1000 Star Trek Series cut in Pieces for easy printing, all Pieces allready in printing orientation for Pins use…
What can you do with numbers? Well, I decided to create some special house numbers: Klingon numbers from 0-9. You can use 1-4 numbers to display your house number. For this, you have 4 different number holders that can be attached to the…
My attempt to create a Klingon Warrior from Star Trek, The Next Generation. You may need to resize to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to…
Glory to You, and Your House! Command the respect of the Klingon Empire right from your display shelf with this 3D printed Gowron bust. As one of Star Trek's most memorable Klingon Chancellors, Gowron's fierce presence is undeniable. This…
This is a Star Trek Klingon themed sleeve that I designed to slip over an Ikea Grono table lamp. (At the time of this posting the lamp can be purchased from Ikea for ~$18 USD here ). I also added a multi-color LED bulb that I found on…
The Klingon insignia was designed by Matt Jefferies. I just made some arrangements to use it as a fancy lamp shade or whatever
This is a direct replacement for the metal wire that holds up the KBOP in the 1993 Williams "Star Trek: The Next Generation" pinball game. When printed in transparent or black, it is less noticeable and more attractive than the stock wire…
This is my take on Kang from Star Trek: The Original Series. You may need to rescale this design to fit your needs.
Klingon Ashtray is a single object print which requires no supports, it is inspired by a Klingon blood wine cup which has appeared on various Star Trek Franchise Productions. The stainless steel liner is purchased separately; it is 8cm in…
Replacement torpedo discs for the Dinky USS Enterprise (Dinky 358) These will also fit the Klingon Cruiser (Dinky 357)
Whether you are raising a flagon of bloodwine to celebrate a glorious victory or starting your day with a steaming mug of raktajino, your surfaces deserve to be defended with honour. Presenting the Rotarran coaster—a bold piece of…
Klingon Disruptor for Minimates Category: Toy & Game Accessories
Get ready—and you’d better keep your bat’leths sheathed. He is the man who invented the “stare,” the undisputed champion of the Klingon High Council. The Chancellor of the Empire, the conqueror of House Duras, and the man who never…
⚔ Character Overview This figurine depicts a young Starfleet cadet of Klingon heritage , blending the strength and pride of Klingon culture with the curiosity and determination of humanity. With his confident stance, determined gaze, and…
The top part which connects to the spaceship is quite weak. I've reinforced it numerous times to the point it's almost double the width of my original design. it can't be made any bigger without ruining the style. The connector on the top…
Battle it out using either Starfleet Command or the Klingon Defence Force in this Star Trek version of Tic Tac Toe. Note: I have provided an alternative lid option that uses the spelling “Defense” instead of “Defence”. Both .stl & .3mf…
Wanted to make my own Klingon padd with a swappable display. Screen graphics and back label are included and I'll add more. Display stand included with DS9 and TNG options. Filament used was Prusament galaxy green PLA.
This is my take on Kang from Star Trek: The Original Series. You may need to rescale this design to fit your needs.