Backpack Strap Adjuster (25mm)
An adjuster for nylon straps commonly found on backpacks. This one fits 25mm wide straps.
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 1533
- Polubienia
- 144
- Ocena
- 5
1775 modeli
An adjuster for nylon straps commonly found on backpacks. This one fits 25mm wide straps.
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This print-in-place openable backpack will fit both “EASY 13” and “MINI 13” poseable jointed figures by soofazone , which have a slot for a rectangular pin on the backside of the chest piece - as opposed to “LUCKY 13” , for whom this…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a partial remix of and inspired by u/along_for_the_ride11 's awesome BAK-1 100 Round Holder for Magpul Backpacker X22 that I purchased from them. I have received permission from them to share my variant. Please see HERE to…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
Wanted a Hook to hang my empty backpack on at work. Didn't want to put a hole in the wall. Thought I'd try to use 3M command strips. Wasn't sure if it would be strong enough, but so far, so good.
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
Smartphones put power in the hands of everyday people to hold awful behavior to account, but holding up a phone makes you a target. This print lets you use your phone as a body camera, and attaches to a shirt, lanyard or backpack. Add an…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
Opens sideways when the nut is not tightened and the nut stays attached (and will not get lost) even when unlocked. Lets you open your bag with ease using two hands while at the same time making it more difficult for pick-pocketers to…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in ABS with 100% infill
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Apple Magic Keyboard and Trackpad Desk Stand V1
Wydruk około 4,25 €–5,19 € nettoWstępna wycena jednego wariantu
Proven on the trail, this is a convenient and lightweight solution for hydration in the outdoors. Great for work or school, too. Attaches with a standard zip tie that tucks into a recess to hold it in place and out of the way. Hook it to…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's best to print in PET or ASA for strength, but my first print was in PLA and worked for initial testing just fine. Put on a backpack strap, molle, or even a belt loop. You might also enjoy: Skilhunt Flashlight Magnetic Charging Stand…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
This is a heart for those who love Dance and want to show it off by having it hang on a necklace, backpack or dance bag. Options are endless!!! Red made on my Bambu X1C and the green on my Mini Prusa
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Bestie heart can be used for necklace/backpack/keychain. Fun little gift to make for your kids class. Enjoy!
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
A HDD cover thats fits lenovo thinkpad models x60, x60s, x61 & x61s.
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
Love Heart necklace for you or someone you love or better yet for all the girls in your kids class at school... Enjoy!!
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Printed using Prusament PETG Jet black. Please be advised, the carried swords will interfere slightly with the display stand version of the waist. Original dragon slayer sword model: Dragon Slayer Sword for Lucky 13 by kh4rj0 | Download…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This chair is smidge lighter than the lightest chair on the market. It is proven with a 160 lb user. Beyond that, please test carefully, use at your own risk. The quality of the printing makes a difference in the strength of the chair…
Wydruk około 5,88 €–7,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3.5" by 2.5" Backpack hanger
Wydruk około 3,17 €–3,88 € nettoWstępna wycena jednego wariantu
Just to have a little bit less mess on the table. V1 - smaller, screws under the hood V2 - with screw openings on the wings Layer 0.2mm 4 Perimeters No Supports No Brim PETG or whatever For 3mm screws with sunken head.
Wydruk około 2,11 €–2,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After hanging my backpack into first model, the model in question did not even hint about bending under load.. Doubled as a backpack and jacket hook. First impression: Hook is definitely flexier than v1, seems to do fine however under…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A case designed to efficiently store a Makita Macpac 2 cordless screwdriver, along with nuts and adapters, in a space-saving manner. No supports needed.
Wydruk około 6,75 €–8,25 € nettoWstępna wycena jednego wariantu
Das Modell soll das Abrollen und Lagern von Backpapier vereinfachen . Es ist extra minimalistisch und vielseitig .
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
Helps to bundle up excess lengths of backpack strap.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Dream Big necklace, backpack, keychain for Valentines Day for the kids in your child's class or just anyone! Enjoye!!!
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
DIY carbon tent stakes made from recycled arrow shafts. I've been testing and tweaking these for a bit and this is the most durable and lightest I've come up with yet. The other designs I've tried on here that look more traditional tend…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This item is part of an initiative carried out in cooperation with the Dobre Praktyki foundation: https://www.dobrepraktyki.org/nasze-projekty/wydruki-3d Created for paramedics in order to keep most important syringes ready to use at…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
Wall-mounted gift wrapping paper holder. For storing wrapping paper rolls, or similar light-weight, roll-like things. Maximum diameter per roll probably around 5cm. Mounted via two wooden screws of size 3. Included are versions for 2, 3,…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
🎒This 3D printed Backpack Strap Clip aims to hold two straps together securely, enhancing comfort and eliminating never ending falling straps, keeping straps aligned and tangle-free during activities🚴. Uses Ideal for backpacks or shoulder…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Also comes with a stand adapter on the back, should be easy enough to delete if it's not desired. ========== Added 200% version (remember to scale up) and stackable version for whatever reason ========== Added reinforced version to fix…
A simple and aesthetic backpack hanger/organizer. Designed for backpack storage but with gyroid infill at 60% and 3 wall loops held up to 9 kg (19.8 lbs). Designed mainly for a 25 mm rod, comfortably fits up to 27 mm, needs to be scaled…
It can hold heavy backpacks and, for no additional cost, lightweight backpacks too. Perfect for students who have bags full of heavy books. For best results, print in PETG with 15% infill. No supports needed. 9/9/26 Update V2.1 has been…
A robust hanger designed for storing heavy backpacks, handbags, and other bags with a handle on a standard closet rod. The shape supports the strap securely and keeps the bag hanging neatly without slipping. Tested with a 10 kg backpack…
NEW - Easy fit hinge! - AND - Snap close lid! - NEW The following backpack types are available: Regular backpack Just the internal storage Accessories backpack Internal storage Two holsters One for the Dummy 13 Katana by @kh4rj0 One for…
This mount allows you to quickly and securely attach your camera to the shoulder strap of your backpack. Using this mount you can access your camera at any time during activities such as hiking and never miss a moment. These types of…
It is not easy to find to buy a good Emergency Whistle for Outdoor Survival so I made my own Extremely Powerful Whistle ! You can use for your safety to scare animals or in case of emergency, have an awesome adventure and leave no trace.…
The original MAKPAC is expensive, so why not after all 3D print it? Yes - possible, but there are no models available and 3D printing a 30x40 cm piece will cost you almost the same as buying an injection moulded part. Also most printers…
Inspired by Heroclip by GearAid https://www.gearaid.com/pages/heroclip this hybrid gear clip allows bags, backpacks or jackets by hung on places, where they otherwise wouldn't. About 60 cm (2' for those from the other side of Atlantic) of…
Quick Release Buckle Clip (backpack & belt Clip)
Holds a strap that's way too long for comfort, has just enough clearance to hold the strap tightly and safely so it doesn't move on it's own Tugging the long end of the strap releases it from the holder Printed with 0.6 mm nozzle, so it…
Gridfinity baseplate for Makita MakPac Support needed (Someone printed it upsidedown and it worked but I didn't try) It does not fit in the MakPac type 4 (sorry el_flexos ). I'll try to create a new version for it. Makpac Case Type 1…
Prints nicely without supports, in photos with .4mm nozzle with 3 perimeters Faster to print than go look for from online stores, guarantee you that.
🎒 Backpack Clip 32mm A simple and reliable clip designed to attach gear to your backpack, bag, or belt. 🔩 🎯 Perfect for: Attaching gear to backpacks 🎒 Hiking & outdoor use 🥾 Everyday carry (EDC) 🔑 Happy printing! 🙌 📸 Printed one? Post a…
A quick and simple remix, but one I just had to make after seeing the All-Terrain Assault Benchy. Now Dummy 13 can have shoulder-mounted cannons, too! Two versions: one with the 13 on the backpack, one without (there's a 13 on the cannons…
Simple strap to keep loose ends of backpack straps contained. Designed for 20 mm (3/4") wide straps. Print with 50% infill, no supports or brim. Printed in PETG. To use: Start by wrapping the end open loop of the strap around the square…
Version 2.0 Now Available The new version has a thicker base structure and inset guides to strengthen the arms and provide overall better grip. Much less chance of the case slipping off the strap or deforming over time and the overall…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATED 7/11/24] “Fishie” the fish-themed shoe…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Reuploaded for contest: Backpack Boosters. Inspired by Heroclip by GearAid https://www.gearaid.com/pages/heroclip this hybrid gear clip allows bags, backpacks or jackets by hung on places, where they otherwise wouldn't. About 60 cm (2'…
Makita offers this storage container product with or without the matching insert boxes. It's cheaper than the usual organizer of this kind, and interlocks with other toolboxes as well. The container's internal structure provides the usual…
These are mounting blocks to mount your makpac boxes to something. I built them to mount my makpacs to a roller board. They are designed to fit on a 300x400 mm board. To mount your makpak just press in the front side, and the push down…
Just print with the outward face on the platter and it should be all good ! Feel free to also check out my wheels file here .
Ever wanted to roll your backpack straps into a nice cylinder? Don't say you didn't do it as a kid. This SnapStrap simply snaps and holds your backpack strap tight so that it doesn't come loose anymore. Secondary its also really fun and…
.4 nozzle .12 layers lines I printed mine vertical with a raft cause of the curve on the bottom.
I remixed this model because I felt that the finger joints were too flimsy. I've had prints that use the same type of fingers break along the layer lines. I also increased the width of the model to 70mm to accommodate the new finger…
I am providing all required information and probably way too much for a simple clip . I recommend to read at least the installation and removal recommendations if you only intend to use the ready to print GCodes. Otherwise you should…
2nd verion: https://www.printables.com/model/1024677-mini-travel-case-backpack-key-hanger Watertight version: https://www.printables.com/model/1046539-mini-waterproof-pill-travel-case-container-for-bac
This is a very heavy duty coat/backpack hook for cubicles with 3" thick walls. It can hold 30+ lbs when printed in PLA with 4 perimeters @ 200 micron layers. It has a saddle-shaped hook to keep the edges from digging into the handle of…
This is a portable sluice box that I designed for backpacking. There are two styles of riffles to choose from. The whole system is modular, so you can use as many or as few sections as you want, and what riffles you want to use. Each…
Stack and clamp your Makita MakPac or Festool Systainer boxes on this convenient waggon for convenient transportation and for quick rearrangements in narrow shops and build sites at any time by simply rolling them around on wheels. This…
The best places I’ve found to mount a Pi on the Sovol SV06 and SV06 Plus require drilling and tapping so I came up with this “backpack” concept to clip onto the controller housing. It lightly plays into PLA’s compliance to hold firm and…
GoPro backpack mount. You'll need the original or similar M5 screw to fit your Gopro.
this is a hook to hold your backpack on a wall
Sometimes it's the simplest tool, it's the one that helps you the most. Practical hook to use during excursions to carry the hat without having to place it on the ground. Dimension hook (mm - Width x Height x Depth): 105 x 45 x 5 My print…
DISCORD SERVER: https://discord.gg/PmNhTSpWCt MY WEB PAGE: https://la3emedim.fr/ INSTAGRAM: https://www.instagram.com/la_3eme_dimension/ I offer you the BHH (Backpack Holder Hook) a hook so that your bag no longer touches the ground, the…
Basic dimensions are down in a drawing, you should scale the model to fit your bag and clothes rod. Print on the side, no supports needed. Add enough wall layers to achieve your required strength.
Printed with 3 perimeter walls around the bottom of the model and 4 perimeter walls around the hooks. 5% infill for the bottom and 15% for the hooks. Material used is PLA+ from Eryone. Print it laying flat on its side so that the layer…
A parametric FreeCAD model, within the spreadsheet there are 3 simple parameters: Width - set the width of the nylon strap you wish to make a buckle for EndThickness - set the thickness of the material on either side of the strap Depth -…
This is the second piece of several pieces that will eventually make the Predator gear. The idea is that these props could be used by cosplayers. This one the Shoulder Cannon Backpack for my Plasma Caster . It does not require any glue or…
These wheels should be much cheaper to make and more practical than the Dolly Trolley as you can lift the whole stack of cases and the wheels will stay on the stack. I have a stack of 4 cases and it rolls without any problem, I would not…
Just print it :)
Simple BTT SFS (Smart Filament Sensor) V2.0 holder for Voron back panel. There is almost 1mm gap between backpanel and holder. Its just for tolerance. You can use 1mm foam tape to fill the gap. STEP file included.
Update: I made a new design, and love it even more: https://www.printables.com/de/model/929626-crane-hook-carabiner This is an adapted version of my USB key clip with improved sturdiness and a flatter appearance to better fit onto a…
A weapon's platform for the Atelidae series. 03.14.24 - Looks like I neglected to add several parts. Fixed that. This piece should fit any guns that fit the hands. Assembly -
In addition to the carabiner, you might need a buckle that attaches to a strap or MOLLE webbing on your backpack and, optionally, a locking pin to ensure the element won't slip away accidentally. Both components can be obtained from the…
Longsword and backpack for my Sentinel remix - https://www.printables.com/model/751923-sentinel-13 Swap filament for good effect.
Updated Version of the great mounting blocks from the original model for newer MacPacs
Description It's a solution to hang heavy things. Hook is designed for a backpack, but you can use it for anything else. You will need two of 4mm screws. Print Settings Layer height: 0,2 Supports: No Infill: 20% Filament material: PET-G…
UPDATE: NOW INCLUDES A VERSION THAT SUPPORTS THE DIGITAL IMAGE TRANSMISSION MODULE!! I don't like the Neo 2 drone cases I've tried, so I made my own. If you just need storage, I recommend you buy a great molded (Pelican-syle) padded case…
Store backpacks and other items neatly in a wardrobe off the floor. Three variations available for different handle strap widths. Supports heavy backpacks with no issues if correct print settings are used. Print entirely with walls for…
Mini organizer container / box for small items ( pills, candy, ... ). Perfect to hang on your keys or backpack.
Total pack weight of <120 grams. Rock solid in ABS, other material mileage may vary Utilizes diablo 9 inch carbide tipped wood blades. May need to drill out retention hole in blade with other brands. Print Specs ABS .4mm nozzle .2mm layer…
3D model of the touchpad spacer for the Framework Laptop 16 with improvements for tolerances. Recommendations: Print with supports (for the hooks) Leave the spacer on the build plate until it cools down to prevent warping Print with a…
This practical hook is designed to clip onto the edge of a table or desk, keeping your backpacks, coats, or bags off the ground. Its minimalist, angled design ensures strength and stability while blending seamlessly with various home or…
Please read the description to the end before downloading! This is a remix and redesign of the "Wrapping Paper Cutter, utility knife 2.0!", https://www.thingiverse.com/thing:5158937. I have a pack of 70mm long carpet knife blades, and I…
Notes Update 2023-02-23: Added new clip v3 STL which has highly improved strength over v2; changed material recommendation after field testing. 21c-p2 hook.stl must be printed on its side with supports enabled as shown in the images, not…
To give back to the P1P community I released my custom backpanel that mounts directly on the stock P1P. No modification is needed and the model is easy to print without supports. Backpanel is orientated correctly when imported into your…
Supposed to wistand around 15Kg (using PLA) but has handeled more. Was designed and printed a year ago, never broke it. Initial dims: 82 x 44 x 5.5 mm
This buckle is originally made for a replacement. The width of a strap should be around 16mm or less. I assume you could just scale it up if you have a wider strap. You can print this with no supports (and if you print with them, I'd…
Trackpoint cap for Lenovo thinkpad keyboard. There are two types, a bulging one and a dented one. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: SainSmart TPU Clear…
by Retrorobotis Original https://www.thingiverse.com/thing:5235035
After publishing my first version of the can holder , I thought it was lacking the ability to fold, so it's volume could be reduced when not in use, to be convenient and easy to store and carry. This has now been addressed. The files are…
Backpack Clip 32 mm – V2 (by 14matt) This is Version 2 of my 32 mm backpack clip, designed for improved performance and durability. Compared to the previous version, this model is twice as strong , offers double the flexibility , and…
Remix of a model by ktansai ( Thingiverse ). I added tabs in the corners so it has room to place rubber feet on the bottom. I cut off the bottom ~5mm in the slicer to make it more ergonomic for me, but left the model sized as ktansai…
This innovative bottle holder design serves a dual purpose: it allows you to cool PET drink bottles in lakes and rivers and easily attach them to backpacks. This makes it perfect for outdoor activities like fishing, hiking, and camping.…
This model is compatible with the lego system.
Simple backpack hanger that is printed in such an orientation as to maximize the part strength.
This has built in supports. Print as oriented and no supports. Lid is designed to use 120mm Fan.
Replacement for broken male part of buckle for camera backpack Lowepro Orion Trekker II. Print settings: Layer height: 0.2 mm; Perimeters: 3; Solid layers - top/bottom: 7; Infill: 50%; Supports: No.
Tired of your backpack straps dangling and getting caught on things? These backpack strap clips are designed to keep your straps neat and tidy while being easy to adjust. With a strong locking mechanism, these clips won't pop open on…
The bag is cool but you gotta carry your Katana? No prob, just ripped a hole at it's bottom for you.