Liczymy pasujące modele…
Hello, I have South Park for you - Kenny, Stan, Kyle and Eric . The characters are authentic, inspired by the South Park series. Suitable for coloring. My kids love these characters :-). Happy printing! I used PLA/PETG as the material.…
Wydruk około 13,00 €–15,89 € nettoWstępna wycena jednego wariantu
This is a "Stein" sized to accept a standard 16 fl oz Monster Energy can. Included is a blank version and one with a modified Monster Logo cut into it. Neither is intended to hold liquid, simply to be a silly way to hold your Monster can.…
Green Lantern Kyle Rayner Inspired Domino Mask Pack Made 2 versions then mixed the two together. Enjoy Category: 3D Printing
This is a 2-part snap-together protective case for the HuskyLens AI vision sensor v1.1. The case & camera can be mounted with M3 screws. Holes in front are for bilateral white LEDs, RGB LED and lens. Raised arcs on top protect the control…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full South Park collection here: South Park DeskBuddys – Full Cast Collection by CheekyTomato | Printables.com Rate, 🟠like & comment …. Of course this you…
Quick remix of MandicReally's super awesome Kyle Cup. The original cups handle has 4 ridges which makes grooves for 5 fingers. Normally only 4 fingers are in the handle, so I feel there should only be 3 ridges / 4 grooves. I only made the…
Huskylens cover take an M2 screw for the hinge. Or try to use filament instead I added a mockup of the camera as well This design is still in progress.
So I decided to make a better design to hold my Elgato Stream Deck Mini on my desk. This mount uses screws or may even work with strong adhesive of some sort. The four holes on the mount use 4.15mm screw hole spacing, I used two of the…
Rewind a few years…maybe a little more than a few years. It's 1997 - Dark Forces II came out. Thanks to the popularity of the Dark Forces II the Kyle Katarn character was absorbed into the expanded universe. This was his first lightsaber…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
My first attempt at 3d modeling. Thought I'd start with Kyle Rayner's Power Battery. From DC Comics Made in Tinkercad.
Recently discovered Meshtastic. My first Device was the Heltec LoRa v3 with SMA antenna piece. I decided to make a case that still has access to the battery port and socketed pin area. This design could be improved on. Screws The case is…
This is a Monster Can designed to keep your friend Kyle from punching holes in drywall. Print instructions Materials Can: Prusament Galaxy Black Logo: 3D Solutech Clear PETG Lid: Prusament Galaxy Silver Body Cover: Prusament Galaxy Black…
A Compact Flash Card Holder/Case that I made for my Dad. Feel free to modify and print. Lid can be a little snug. Note: My printer needs the bed tuned a little bit better again so the lid looks a bit funny on the image at top which I…
The lightsaber of Kyle Katarn: hero of the Rebellion, Jedi Master and all around cool guy! Kyle is the star of the Dark Forces/Jedi Knight video Game series, and this saber made its debut as Kyle's personal lightsaber in Star Wars Jedi…
Compact Flash card case with lid to hold four CF cards.
This Husky lens mount can pivot up and down, it uses the two mounting holes on the husky lens and has two screw holes to mount it in place. This mount requires 1x 40mm hex screw 2x 10mm hex screw and one nut. (for REV Robotics Parts)
A vibrant keycap inspired by Kyle Broflovski from South Park. With his bright green hat and expressive face, this design perfectly captures his sharp wit and strong personality. Great for fans of the show and collectors who love classic…
This is my attempt at Kyle Katarn's Lightsaber from The Jedi Knight games. You just need to print one of each part, everything should just slide into each other, but you may need to sand it and glue some parts. Here’s the assembly and…
Print from PETG Infill: 15% Fill pattern: Rectilinear Support: Organic Higher temperature for V6 nozzle in bgcode Original here
this is a Huskylens Cam mockup for further 3D constructions. it was not designed to be printed! I used it to construct cases like this
This is Kyle (full name: Kyle Josef Gru), Gru's adorable yet likely deadly pet from Despicable Me. Rumored to be half-dog, half-piranha, he's nonetheless one of my favorite characters of the franchise. And in the midst of all the madness,…
Bring the iconic redhead from South Park to life with this amazing 3D printable STL model that captures Kyle's distinctive winter hat and unmistakable charm! This detailed figurine showcases Kyle's classic pose and features, making it…
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
Loose copy of an existing design of a Nib holder and did an XOR boolean with a 10% scaled up nib holder from the collection (one with the longer threads) to cut out a hole. I should've used the shorter thread one in hindsight probably…
This is a mini version of my Kyle Gru model, designed to be a pencil or straw ornament. It can be printed in one color and easily touched up with some white model paint and a fine-tipped brush, or the 3MF file is set up for a…
So I needed a nice way to hold a bunch of Standard SD and MicroSD Cards. made this little holder/organiser. Might make a lid later as the design has some areas to help support one. This currently holds 12 SD and 12 MicroSD. I had to…
This simple mount allows you to attach Kyle Warren Gridfinity Screw Together baseplate ( https://www.printables.com/model/300603-gridfinity-screw-together-baseplate ) to the side of any 2040 V-Slot aluminum extrusion using 12mm M3 screws.
First attempt at hueforge and posting a model, so any advice/changes feel free to let me know. Printed on AnkerMake M5C took about 5 hours. Project: Larson 2021 Cup Series Champion update.hfp Print at 100% infill with a layer height of…
Made this for my brother, Car is Audi TT Nameplate version has hole on both sides
This custom light saber hilt, "The Kyle," doesn't listen to anybody and does what it wants. Despite multiple warnings it drinks Monster even though his kidneys are failing. Arguing with it will only result in a fist through the dry wall.
This is a model I made in Tinker CAD. Hope you like.
The best walker phone holder I could find is designed by Kyle Cotton. I reduced the bulk and streamlined it to mount closer to the walker to have fewer problems snagging in tight quarters.
Stan Marsh and Kyle Broflovski from the show South Park as simple single color key chains. Their faces and hats are extruded to different heights to give them more interest than simple outlines. Both are roughly 40mm wide, 50mm tall and…
Simple nameplate, I did in black and pink. It is 4x8 inch. Holes in back for magnets. Magnets I used - https://www.amazon.com/dp/B089CZG942?ref=ppx_yo2ov_dt_b_product_details&th=1
Wall mount for Jackyled Power Strip with (6) outlets and (4)USB ports https://www.amazon.com/Protector-JACKYLED-Spaced-Outlets-Extension/dp/B07Y98YFKZ Design is in no way affiliated with or endorsed by Jackyled.
Kyle Broflovski (South Park)
I completely redid this wallet, changing the location of the bands, added a second push slot to make it universal, separated the airtag holder onto the money clip to make the money clip more substantial and hold the money better. And this…
MrFox recently got himself a new toy; A DFRobot Huskylens 2 and wanted to mount it to his faithful old DFRobot Maqueen Lite v5 . It is quite a tight fit between the wheels and the micro:bit slot. Print two plates. Mount the bottom plate…
Just a friendly little Kyle who wants to be your friend.
I would suggest printing it in multicolor blue green. It looks good with support PLA and make sure you look up your ring size and how many millimeters is it so you can scale
Desk LED (SKYLEO) - Additional rotation axis (XY) The original LED has only 2 rotation axis so that it can be mounted only (perpendicular) on the left or right side of the desk. This model makes it possible to mount the LED on the back…
Simple display stand for a set of puzzles.…
casing for huskylens v1 https://my.cytron.io/p-gravity-huskylens-ai-machine-vision-camera-with-silicone-case cytron's rekabit https://my.cytron.io/p-rekabit-simplifying-robotics-w-microbit smoke sensor…
Tool for holding glass against grinder for finishing
Kyle Crane Statue – Dying Light: The Beast Bring Kyle Crane from Dying Light: The Beast into the real world with this detailed, seven-part collectible statue! This model features the iconic Dying Light protagonist and is designed to be…
This is designed for a multi-color printer. This can be printed on a single color printer, but you'd need to set the printer to pause on color changes, determine the color sequence for the first 2 layers, and swap the colors in that…
This is Kyle (full name: Kyle Josef Gru), Gru's adorable yet likely deadly pet from Despicable Me. Rumored to be half-dog, half-piranha, he's nonetheless one of my favorite characters of the franchise. And in the midst of all the madness,…
This is a 2-part snap-together protective case for the HuskyLens AI vision sensor v1.1. The case & camera can be mounted with M3 screws. Holes in front are for bilateral white LEDs, RGB LED and lens. Raised arcs on top protect the control…
Desk LED (SKYLEO) - Additional rotation axis (XY) The original LED has only 2 rotation axis so that it can be mounted only (perpendicular) on the left or right side of the desk. This model makes it possible to mount the LED on the back…
Miles de Modelos Gratis en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/gratis Cientos de Ajedrez en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/ajedrez Pasos Semana Santa en :…
The Terminator - Kyle Reese (Michael Biehn) - 1984 3D printable model.
