Wyniki wyszukiwania: lant

Sortowanie

14 345 modeli

P
PrintablesMaxT

Christmas Lantern Christmas Lantern Christmas Lantern

https://www.buymeacoffee.com/maxt ---------------------- Update log January 2024: Version 2 of the base has been uploaded, see below for more info SIZE The model will fit on Prusa Mini+ (180x180). Feel free to size it up or down as you…

Pobrania
38 147
Polubienia
10 413
Ocena
4,92
P
PrintablesSASSy Design

Bamboo Plant pot and Planter - Vase mode design

~ Design collaboration with Azurefilm ~ A nature inspired plant pot! We hope you enjoy it as much as we did design it! Used Filament: This model was printed using Sage HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us…

Pobrania
15 747
Polubienia
3963
Ocena
4,91
P
PrintablesUncle Jessy

Hanging Skull Planter - NO SUPPORTS!

Hanging / Sitting Skull Planter - No Supports needed for this model! Designed in Nomad Sculpt you can print and put your favorite plant in there! Two file options - with/without drain hole No Supports are required - similar to printing a…

Pobrania
14 114
Polubienia
4864
Ocena
4,94
P
PrintablesMODERN MACHINE

Vori Square Planter by MODERN MACHINE

COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== PRINT INSTRUCTIONS 6-12% infill 15% infill for tray 5 top layers 8 top layers for tray 2-3 outer walls. Tree supports for tray, build plate only. Fuzzy skin enabled for…

Pobrania
11 319
Polubienia
3608
Ocena
4,95
P
PrintablesCalebTimoteo

Super Mario Bros Pot Plants - Pipe, Brick Block & Question Block

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed (Print the pipe upside down) Scale it as you like :)

Pobrania
7950
Polubienia
3218
Ocena
4,89
P
PrintablesCalebTimoteo

Darth Vader Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Pobrania
7337
Polubienia
2444
Ocena
4,85
P
PrintablesCalebTimoteo

Grogu (Baby Yoda) - Star Wars Pot Plant

Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Pobrania
6893
Polubienia
2008
Ocena
4,81
P
PrintablesCalebTimoteo

Cute Pokemon Pot Plants - Pikachu, Bulbasaur, Charmander, Squirtle

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)

Pobrania
6500
Polubienia
2486
Ocena
5
P
PrintablesCalebTimoteo

Axolotl - Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Pobrania
3403
Polubienia
1152
Ocena
4,82
P
PrintablesDainty_Things

Self Watering Plant Bulb (several sizes)

Self watering bulb for planters. Just fill it with water and stick in soil. Comes in 100ml, 200ml and 300 ml versions If the bulb is getting empty too soon for your liking, try covering the opening with a bit of soil and then sticking it…

Pobrania
3339
Polubienia
808
Ocena
4,7
P
PrintablesRB3D

Self Watering Planter

Print Instructions Filament: PLA or PETG Supports: None! All my designs are created to 3d print without support. Perimeters: 3-4 (to achieve watertight seal) Layer Height: 0.15-0.3mm And finally …. share a picture of your print in the…

Pobrania
3099
Polubienia
621
Ocena
4,94
P
PrintablesCalebTimoteo

Darth Vader Low Poly - Star Wars Pot Plant/Pen Holder

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Pobrania
3064
Polubienia
838
Ocena
4,94
P
PrintablesSASSy Design

Animal Paw Pattern Plant pot and Planter - Vase mode design

A lot of you have requested that so here it is - a regular pattern Paw Pot design! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…

Pobrania
2510
Polubienia
840
Ocena
4,94
P
PrintablesCalebTimoteo

Pikachu - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed No Brim needed Scale it as you like :)

Pobrania
2509
Polubienia
795
Ocena
4,9
P
PrintablesTlangphoto

Polaroid instant One-step planter

Combine your love of Polaroid cameras and indoor plant life with this 3D printed planter shaped in the style of the Iconic Polaroid Instant camera. I designed this planter to be the exact size of a actual Instant camera, the exact…

Pobrania
2423
Polubienia
1548
Ocena
4,9
P
PrintablesCalebTimoteo

Cute Darth Vader - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (paint-on supports) Scale it as you like :)

Pobrania
2393
Polubienia
576
Ocena
4,79
P
Printablesogldr

Self Watering Plant Pot

Simple self watering plat pot with floating water level indicator. Inner pot diameter: 8 cm. The reservoir is designed to hold approximately 100ml of water. It is possible, though not recommended, to fill a bit more. When using an…

Pobrania
2279
Polubienia
546
Ocena
4,88
P
PrintablesA2S_dESIGN

Tutor plants

Strong and robust support for climbing plants. As it is stackable, it can be reached at any height. Print at 100% infill for greater strength

Pobrania
2224
Polubienia
1086
Ocena
4,85
P
PrintablesCalebTimoteo

Totoro (Studio Ghibli) - Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)

Pobrania
2213
Polubienia
801
Ocena
5
P
PrintablesFroggy Forge

Suspended aquarium planter

UPDATES 02/03/2024: STEP files added The idea of this print is to have plantes suspended in the edges of the aquarium, having only the roots sumerged in the water. The model has 2 pieces, the ring that is fixed by pressure on the edge of…

Pobrania
2154
Polubienia
806
Ocena
5
P
PrintablesKyle Withey

Green Lanterns (2026) John Stewart Ring

John Stewarts Ring from the up coming Green Lanterns HBO series. Not 100% accurate as only based on one shot from the teaser trailer.

Pobrania
2145
Polubienia
69
Ocena
5
P
PrintablesCalebTimoteo

Oddish - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)

Pobrania
1897
Polubienia
518
Ocena
5
P
PrintablesSASSy Design

Rhombus Plant pot and Planter - Vase mode design

A simple low-poly design of a rhombus structure pot. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…

Pobrania
1886
Polubienia
584
Ocena
5
P
Printablesphi.gl

Stackable Moss Pole - Climbing Plants Support

Update 2024-01: I finally realized why some users were complaining about the bad dimensions. It was meant for folding with the grooves out and the smooth side in. If you do it the other way around, it bends less and doesn't fit into the…

Pobrania
1739
Polubienia
389
Ocena
4,48
P
Printablesfifindr

Articulated Jack-O’-Lantern Buddy

Meet the Articulated Jack-O’-Lantern Buddy – a fun Halloween-themed figure with posable legs and cute little arms. Use tree supports with back seam position. ✅ 70 mm tall ✅ Articulated legs for playful posing ✅ Perfect Halloween…

Pobrania
1661
Polubienia
329
Ocena
4,29
P
PrintablesCalebTimoteo

Charizard - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

Pobrania
1647
Polubienia
503
Ocena
4,5
P
PrintablesCalebTimoteo

David (by Michelangelo) Head Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Pobrania
1590
Polubienia
458
Ocena
4,86
P
PrintablesSASSy Design

Atomic science Plant pot and Planter - Vase mode design

A simple yet beautiful science design inspired by the looks and vibes from the atomic-punk game - Atomic Heart Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some…

Pobrania
1590
Polubienia
568
Ocena
5
P
PrintablesJustin

Parametric Self Watering Planter w/ Water Level Indicator

This is a parametric planter with a vented, self-watering reservoir and water level indicator. I designed this in Fusion 360 and have included STLs for a 4", cylindrical version with interchangeable smooth, fluted, and knurled variants in…

Pobrania
1568
Polubienia
466
Ocena
4,7
P
PrintablesSASSy Design

SASSy Tile Mosaic Plant pot and Planter - Vase mode design

A hear a lot of compliments about our banner tile graphic so... Now you can enjoy it in as a pot design!! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…

Pobrania
1552
Polubienia
468
Ocena
5
P
PrintablesCalebTimoteo

Darth Vader Melted Mask - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Pobrania
1542
Polubienia
716
Ocena
5
P
PrintablesJon May

2023 Butt Planter

Spring is approaching, and I wanted to refresh my plants, so here's a new take on the butt planter ! I recommend printing with supports (on the build plate only) because the raised base allows for drainage. The planter is 149x122x131 mm…

Pobrania
1521
Polubienia
385
Ocena
5
P
PrintablesAndreas G

Collection of Flowerpots/Inner Plant Pots in various dimensions

Inner plant pots in various dimensions: easy to print and no support needed The pot in the pictures is d95-D140-H115 and is printed in PLA. If you need other dimensions you can scale the model or feel free to leave a commment - there will…

Pobrania
1499
Polubienia
319
Ocena
5
P
PrintablesDGA

Plant support

Simple plant support (trellis) Two versions one with straight spikes printed without supports Second version printed with supports\ Material: PLA, PET-G, ABS etc. Layer high: 0,3 or lower

Pobrania
1485
Polubienia
359
Ocena
4,89
P
PrintablesJoni the great

V2 Chip and Coolant Fan

I needed a chip and coolant fan for a couple of my jobs. So set out to design and print one. I have been running this one at 14,000 RPMS for about 10 weeks now and have zero issues. I am using an 1/2" ER 20 collet. Can be run on most CNC…

Pobrania
1481
Polubienia
48
Ocena
4,5
P

Strawberry Planter

I used Fusion 360 to design a Strawberry Pot, then 3D Printing to bring it to life. I'm going to grow some of my own food, and I LOVE strawberries! Learn how to make it yourself, just watch my tutorial! Print instructions This will fit a…

Pobrania
1467
Polubienia
198
Ocena
4,8
P
PrintablesSASSy Design

Tall Geometrical Bonsai Pot and planter

A simple and easy to print vase mode pot and planter for your plants. Best to print using dubble layered vase mode settings, using any filament you want. Happy printing :D

Pobrania
1403
Polubienia
348
Ocena
4,94
P
PrintablesTurbopstros

Bonsai / Plant Pot with Drip Tray, Drainage mesh

Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…

Pobrania
1389
Polubienia
447
Ocena
4,86
P
Printablesdroidik

Low poly stormtrooper planter

Fits 6.5cm (diameter) x 5.5cm (height) planter.

Pobrania
1378
Polubienia
498
Ocena
5
P
PrintablesSASSy Design

Orbit Plant pot and Planter - Vase mode design

Simple and easy to print - Looks great in a modern interior. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…

Pobrania
1343
Polubienia
337
Ocena
4,63
P
PrintablesSASSy Design

Ball Plant pot and Planter - Vase mode

A very simple yet beautiful design for a geometrical plant pot. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…

Pobrania
1318
Polubienia
324
Ocena
5
P
PrintablesSASSy Design

Quartz Plant pot and Planter - Vase mode design

A simple geometrical design inspired by a regular crystal structure. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…

Pobrania
1310
Polubienia
404
Ocena
5
P
Printableskaje

Lloid (Animal Crossing gyroid) planter

This is a re-mix of a re-mix, based on this: https://www.thingiverse.com/thing:3442346 Note : If you want to use this as an actual planter, PLA prints can be "leaky." I took the precaution of giving the inside of the prints a coating of…

Pobrania
1277
Polubienia
292
Ocena
4,88
P
PrintablesCalebTimoteo

Clone Trooper Helmet Phase 1 & 2 - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Pobrania
1245
Polubienia
346
Ocena
4,75
P
PrintablesSASSy Design

Parametric Rock Plant pot and Planter - Vase mode design

A new parametric model inspired by the structure of big rock formations. Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to…

Pobrania
1229
Polubienia
352
Ocena
5
P
PrintablesSASSy Design

Geometrical Design Pot and Planter - Version 1 - Vase mode

A simple yet very decorative design flower pot inspired by the structure of multiple intersecting crystals. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outter…

Pobrania
1190
Polubienia
355
Ocena
5
P
PrintablesBlue Hazel

Twisted Lantern Lampshade

Twisted Lantern Lampshade Lampshade for E14 lamp socket or vase cover. Printing: The lampshade was printed with one perimeter in vase mode. The light mount adapter is also printed in vase mode. For E14 socket a negative volume was…

Pobrania
1139
Polubienia
505
Ocena
5
P
PrintablesSASSy Design

Robotic Cell Plant pot and Planter - Vase mode design

An interpretation of a cell-based robot organism. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower…

Pobrania
1090
Polubienia
356
Ocena
5
P
PrintablesSASSy Design

Checker Plant pot and Planter - Vase mode design

A simple floor pattern inspired plant pot Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower layer…

Pobrania
1075
Polubienia
289
Ocena
5
P
PrintablesSASSy Design

Lava Lamp Plant pot and Planter - Vase mode design

Lava lamps are so cool! So... why not making a pot like them! Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the pleasure to review this…

Pobrania
1067
Polubienia
341
Ocena
5
P
PrintablesTantalus

Ghost of Tsushima Inspired Miniature Japanese Garden lantern

Legal Note: Ghost of Tsushima is of course copyright of Sucker Punch Productions all rights reserved. I was inspired to create my own version of a Japanese garden lantern after playing the brilliant game Ghost of Tsushima, I came across a…

Pobrania
1050
Polubienia
597
Ocena
5
P
PrintablesSASSy Design

Wavy Plant pot and Planter - Vase mode design

A new plant pot inspired by wave patterns. Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review this filament and we can…

Pobrania
1037
Polubienia
313
Ocena
5
P
PrintablesSASSy Design

Switch Pot and Planter for House plants - Vase mode

A simple yet very creative design. Fits great into modern interiors! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…

Pobrania
993
Polubienia
359
Ocena
5
P
PrintablesCalebTimoteo

Tatooine (Luke Skywalker's home) - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)

Pobrania
983
Polubienia
649
Ocena
5
P
PrintablesCalebTimoteo

AT-AT - Star Wars Planter

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Pobrania
955
Polubienia
522
Ocena
5
P
PrintablesDanLab

Customizable Self-Watering Planter Insert for round pots - Source included

I wanted a self-watering planter that I could insert in my various ceramic/plastic pots and would be fast, easy and economical to print. You can use this insert in pots you already have. Using the attached Fusion 360 file, change the…

Pobrania
955
Polubienia
370
Ocena
4,87
P
PrintablesCalebTimoteo

Baby Yoda (Grogu) Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Pobrania
929
Polubienia
191
Ocena
5
P
PrintablesSASSy Design

Alien Queen - Pot and Planter for your Plants - Vase mode design

More advanced Alien pot design for your alien plants and other strange green creatures. Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…

Pobrania
907
Polubienia
262
Ocena
4,88

Criss Cross Planter

The Criss Cross planter a neat design that will make your succulent the center of any table. The interior hole is 50 mm (~1.97 in)

Pobrania
895
Polubienia
216
Ocena
5
P
Printablesjonasl75

Self Watering Plant Pot With Water Indicator

Self Watering Plant Pot With Water Indicator The original outer pot is 150 mm in diameter for the inside pot to fit. I use silver silk filament from Ziro bought on Amazon for 259 swedish krona. If you wish other dimension you can message…

Pobrania
886
Polubienia
231
Ocena
5
P
PrintablesmoWerk

Planter Dish / Plate (Blumentopf Untersetzer)

18cm inner diameter (188mm outer) planter dish to put below planter or cover pots to collect and evaporate excess water. 140mm and 159mm inner diameter versions added. A variation with higher rim has been remixed by @FabianBaumeis_972452…

Pobrania
877
Polubienia
56
Ocena
5
P
Printablesonyx

Cactus Plant MMU

A multi material remix. This is intended to be printed as one part on a multi extruder system, not printed in parts and assembled. Remixed from: https://www.thingiverse.com/thing:2398762

Pobrania
874
Polubienia
134
Ocena
4,9
P
PrintablesCalebTimoteo

K-2SO - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)

Pobrania
870
Polubienia
502
Ocena
5
P
PrintablesCalebTimoteo

Moai Statue - Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)

Pobrania
861
Polubienia
252
Ocena
5
P
PrintablesSASSy Design

Flower Plant pot and Decor Planter - Vase mode design

While thinking of new ideas we realized that we never made a Flower flowerpot! So... We made one! We hope you like it! Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send…

Pobrania
818
Polubienia
229
Ocena
5
P
PrintablesPassforce

Sealant/Silicon Cartridges Cap

Sealant/Silicon Cartridges Cap Print in pla in 0.25mm

Pobrania
814
Polubienia
87
Ocena
4,77
P
Printablesthudbuzz

Succulent Plant Pot / Planter "Florence"

*** New collection of 8 plant pots - https://www.prusaprinters.org/prints/127174-plant-pot-collection *** The "Florence" plant pot / planter is 7cm in diameter and 6cm in height. The design is a solid shape, giving more freedom for wall…

Pobrania
791
Polubienia
167
Ocena
4,93

Cartoon Wheelbarrow Planter

Here, i want to share with you my Wheelbarrow Planter, that i made for my Garden. It was designed, so that it looks like it was made out of wodden Parts that could be found somewhere in a Forest. Its Ideal to be used with other Cartoon…

Pobrania
790
Polubienia
274
Ocena
4,44
P
PrintablesSASSy Design

Matrix Cube Plant pot and Planter - Vase mode design

A simple geometrical design inspired by the amazing Matrix movies! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…

Pobrania
780
Polubienia
169
Ocena
5
P
PrintablesCalebTimoteo

General Grievous - Star Wars Wall Planter

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint in support, use .3mf file) Scale it as you like :)

Pobrania
757
Polubienia
321
Ocena
5
P
PrintablesCalebTimoteo

Air Jordan I - Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Pobrania
744
Polubienia
152
Ocena
0
P
PrintablesSASSy Design

Lampshade Plant pot and Planter - Vase mode design

A simple design inspired by modern lamp shade structures. Used Filament: This model was printed using Off-White HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us some samples of their filaments, and we had the…

Pobrania
723
Polubienia
118
Ocena
5
P
PrintablesCalebTimoteo

Caterpie - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Pobrania
717
Polubienia
318
Ocena
5
P
PrintablesIgnacio Vidal

Kid Turtle Pot - Planter / Maceta Tortuga Niño Remix

I've remixed this nice model to convert it into a nice planter inspired in the chids tale “Manuelita” (He's Turtlue Kid) It was printed on a Artillery Hornet. with prusa slicer 2.5. (using prusa profile Hornet 0.20) Flament : PLA 3n3.…

Pobrania
715
Polubienia
130
Ocena
5
P
PrintablesMetikumi

Round and Plain Plant Saucers with Various Profiles and Sizes

I've designed a collection of simple, round plant saucers to complement your gardening needs, focusing on both aesthetic and functional versatility. Each saucer features a unique rim profile, allowing you to match it seamlessly with…

Pobrania
712
Polubienia
210
Ocena
4,9
P
Printableshitchhiker4200

A Self Watering Planter (One Print in Spiral Vase)

These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. A single piece/print design of the…

Pobrania
709
Polubienia
197
Ocena
5
P
PrintablesIsThisPrintable

Succulent Planter pompeijan villa

This Succulent Planter is inspired by pompeijan architecture. It has a little pool for excess water and an insert sieve to prevent root rot. I added tiny chairs and a tiny table mostly for fun, because they don't print very well. The…

Pobrania
659
Polubienia
187
Ocena
5
P
PrintablesCalebTimoteo

Jabba's Palace - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (paint-on supports) Scale it as you like :)

Pobrania
646
Polubienia
550
Ocena
0
P
PrintablesPolyForge

Calcifer – Démon du feu du Château ambulant

Cette figurine représente Calcifer , le démon du feu lié par contrat à Howl dans Le Château ambulant . Avec son apparence de flamme vivante aux yeux expressifs et à la bouche souriante, ce modèle capture l'essence du personnage tel qu'il…

Pobrania
636
Polubienia
243
Ocena
0
P
PrintablesMarin

Watering Can for Indoor Plants

Our grandchild has discovered that it is very cool to water indoor plants. The problem was that, all watering cans, we can find around us was too big for tiny hands. We googled to find some appropriate model to buy. We couldn't find…

Pobrania
633
Polubienia
98
Ocena
5
P
PrintablesStephan

Moai Planter

Moai Planter. Found on "MyMiniFactory" Scaled to 120% The *.stl file is from MyMiniFactory and I do not know which License is the correct one. Please let me know if somehting is not correct. Print instructions Filament: FilamentOne Glint…

Pobrania
625
Polubienia
121
Ocena
5
P
PrintablesSASSy Design

Wheat field Plant pot and Planter - Vase mode design

A simple plant pot inspired by a gaze upon a vast wheat field with no end. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…

Pobrania
618
Polubienia
162
Ocena
5
P
PrintablesCalebTimoteo

Venus de Milo - Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-on-Support) Scale it as you like :)

Pobrania
606
Polubienia
237
Ocena
5
P
Printablescastlekira

Elephant Succulent Planter

Simple elephant succulent planter. the 3mf file contains 2 version, tusk or no tusk. there are 2 cylinder modifier to check for pot size and also for drainage hole. the elephant should be printed “laying flat” on the pot hole opening with…

Pobrania
605
Polubienia
172
Ocena
5
P
PrintablesMaesgd

Twisted planter _270 with integrated water reservoir ( onepiece _ No support)

2nd variation of my original twisted planter. This time the planter is 270 degrees twisted compared to the original 60 degrees. A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the…

Pobrania
603
Polubienia
147
Ocena
4
P
Printablesseidlova

Oddish planter with plate

PLA; filling 15%; 0,15 mm Quality; No supports; Remixed oddish planter, drip plate are attached.

Pobrania
600
Polubienia
120
Ocena
5
P
PrintablesTmpx64

The Little Leaning Plant Pot

Fits small pots (5 x Ø 5,5 cm) for cactus, succulents, etc. but is also perfectly suited to be scaled up. edit 09/05/2023: New file “Tilted small flower pot adapter.stl” added. This adapter is meant to sit at the bottom if you want the…

Pobrania
595
Polubienia
490
Ocena
4,75
P
PrintablesSASSy Design

Star Probe Plant pot and Planter - The Invincible

We have been playing The Invincible recently and we loooooved the sci-fi style sooo… we got inspired for such a design! We hope you enjoy the design too! Print information: Recommended regular/base settings (15% infill, 5 top layers, 4…

Pobrania
592
Polubienia
239
Ocena
5
P
PrintablesAdam Kimmerly

Gasket and Sealant Scraper

In need of some plastic scrapers to remove old gaskets from a motorcycle motor without damaging the mating surfaces, I didn't have any good options around. But, that's an easy problem to solve. I quickly drafted up four versions of a…

Pobrania
584
Polubienia
64
Ocena
5
P
Printablesdodasch

Presta Valve Tire Sealant Funnel

A small funnel for tire sealant especially for Presta valves (with thread)

Pobrania
575
Polubienia
68
Ocena
4,71
P
PrintablesSASSy Design

LowPoly Shatter Planter

A Simple low poly planter for your plants. Happy printing!

Pobrania
564
Polubienia
177
Ocena
4,89
P
PrintablesCalebTimoteo

GNK Droid - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Pobrania
548
Polubienia
300
Ocena
4,75
P
PrintablesSASSy Design

Christmas Little Star Plant pot and Planter - Vase mode design

Small stars twinkle in the sky, as they do each day every day. So inspired by that we created a new pot design! Merry Christmas and Happy Holidays! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…

Pobrania
537
Polubienia
206
Ocena
5
P
PrintablesMrViddy

Hexagon Planters

>I Don’t Care if you sell my planter to make money as long as you give me Credit for my work. :) Thanks. The Planters walls are 3mm thick i put 20mm infill (Gyroid infill) Filament that I used: PETG Urban Grey…

Pobrania
518
Polubienia
132
Ocena
5
P
PrintablesCalebTimoteo

Baby Yoda (Grogu) Crib Hover - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)

Pobrania
508
Polubienia
227
Ocena
5
P
Printablesromanslezak78

Silicone Caulking / Silicone sealant straightener

1) remove the old silicone 2) clean with, for example, isopropyl alcohol 3) apply silicone and wipe with an 8 mm squeegee in the direction of the slant (so that the silicone gets everywhere without air bubbles) 4) tear off the silicone…

Pobrania
502
Polubienia
67
Ocena
5
P
Printablesemisticg

Modular Moss Pole for Climbing Plants (Modułowy palik do mchu dla roślin pnących)

PL: 🪴 Modularny palik do mchu dla roślin pnących 📖 Opis ogólny Ten kompletny zestaw modułów palika do mchu został zaprojektowany z myślą o wspieraniu i przyspieszeniu wzrostu pnączy roślin typu Monstera , Scindapsus , Epipremnum ,…

Pobrania
496
Polubienia
109
Ocena
5
P
PrintablesMaesgd

Twisted planter with integrated water reservoir ( onepiece _ No support)

A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the plant too much water without drowning the plant. Thanks to the reservoir the plant will be able to get the water in when he needs…

Pobrania
491
Polubienia
124
Ocena
5
P
PrintablesCalebTimoteo

Snoopy Pot Plant (Peanuts) - Home Decoration

Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)

Pobrania
477
Polubienia
165
Ocena
5
P
PrintablesSASSy Design

Sea Foam Summer Pot and Planter - Vase mode

An easy and simple summer pot inspired by the structure of sea foam. Printing settings: Vase mode - 2 or 3 layers Filament - Fiberology Easy PLA Light gray

Pobrania
462
Polubienia
185
Ocena
5