Wyniki wyszukiwania: lapping

Cute Monkey Clapping Keychain

Easy to make a Monkey clapping keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

flexi dragon with flapping wings

I cared a lot about this dragon. Mainly the system for moving the wings gave me a hard time. I hope it makes you happy.

(Mostly) Print in place flapping swift

Print in place / flexi-wing swift model that flaps its wings when you push the button. Model size is approx 180mm wingspan, 100mm length and 30mm tall. STL file contains the lower body with all the wing parts and flapping mechanism, upper…

Flapping Bat Print in Place Toy

Watch for the flying bats !!! It flaps the wings like a bat (check video below) Give it a Try it is a fun quick print. Fusion360 File Available! Print instructions The hole is 4mm diameter, it calls for a bamboo barbecue stick. It should…

Flapping Airplane (Ornithopter)

“This plane can flap its wings and fly like a bird.” It requires some work, but you enjoy making it. ～Things to prepare other than 3D printer output products～ 3D printed parts ….1SE Plastic straw ….2EA (diameter 4mm, length 130mm) Plastic…

Adjustable Bottle Cutter PET REMIX (more overlapping of the bearings)

A bottle cutter that uses 608ZZ skateboard bearings (8x22x7mm), and 19.2mm metal disks to adjust the height. BOOM: 2 X 608 one face grinded bearings (8x22x7mm) (I used basic sanding paper (80) and lots of patience to grind both bearings.)…

The Claw - Multiboard overlapping panel

THIS IS A WORK IN PROGRESS, I have printed and put up a few of these now and think they are pretty good, and look pretty neat installed. Still looking to get some feedback. I have provided a set of 8x8 “Claw” connector tiles. There is a…

Flexi Mini Manta Ray - Flapping Fins - Print in Place

Free for personal use! For commercial license, check the Extra service section. "Silent wings across the deep -- the gentle giant now fits in the palm of your hand🐋" Articulated Mini Manta Ray -- a compact, palm-sized flexi model inspired…

Overlapping Segments Rotary Digital Clock

Darrell Aldrich's smart idea of overlapping segments digital clock is used to make the digits relatively larger than former Rotary Digital Clock . Instead of painting segments, printed part is just sticked to the rotor. Darrell Aldrich…

Overlapping Pen Caddy V2

A sharper square version of my overlapping pencil cup. Not vase mode, scale up to your desired size. Fast print. Original is HERE

Round Overlapping Ventilation Grille with Insect Net

Round Overlapping Ventilation Grille with Insect Net Upgrade your outdoor ventilation system with our robust Round Ventilation Grille , featuring an overlap profile and a built-in insect net. Engineered for exterior applications, this…

Flapping Bat - similar to Kirkland Glitter Bats

This is a model based on the kirkland glitter bats - It is broken into 4 pieces that create a bat. I have printed it with Prusament galaxy black, .2mm Quality, 20% infill and a brim.

Origami flapping bird bubblehead (with flapping wings)

Origami flapping bird …but it's 3D printed. I wanted to create something unusual, so I added mechanical twist to bubble-head toy concept. My inspiration was origami crane (or swan), which is also able to move wings. Instead of pulling the…

The Flapping Butterfly

Enchanting simplicity of a flapping butterfly, now in the form of a delightful 3D-printed toy! Came up with this idea for an easy 3D printed Easter gift for the kids!

Overlapping 6-Piece Burr Puzzle

The gap0.1mm version worked for me, the other two are for more generous printers

HYMER Eriba Swing - Front-clapping bracket

I created this model for the front flap of a HYMER Eriba Swing caravan. To seal the screw connection, I used two O-rings (ID=7.10 x SD=1.8) plus additional sealant during assembly. I printed it in ASA with a layer height of 0.2 mm.…

Seatbelt Holders - Stop the flapping!

A lot of vehicles out there have the issue with the seatbelts (especially the rears) flapping and clapping against the plastic trim or the seat when the windows are open and they are unbuckled. This model was designed for my 2026 Ford…

Overlapping 4x4x5 Cuboid

This twisty puzzle brings an interesting twist to the classic 4x4x5 cuboid, drawing inspiration from Tony Fisher's Overlapping Cube. Designed with overlapping layers, it reveals additional pieces on the 4x5 faces, echoing Fisher’s…

Flapping Vampire Bat - Pull-String Halloween Jumping Jack with 22 cm Wings (No Supports)

A pull-string vampire bat for a door, a window, a bedroom or a Halloween tree. Pull the little pumpkin and the bat flaps its 22 cm wings; let go and they drop back. Big white eyes, white fangs and a fuzzy belly. HOW IT WORKS • Each wing…

Food printing: overlapping circles pattern

These interlocking circles are both a mathematical composition and a traditional Celtic motif. It can also be found as a basis of mandalas. We have successfully printed this design in meringue, royal icing and chocolate. To find recipes…

Flapping Butterfly

The servo motor mounting bracket was made for the MG90S 9g (typically black) micro servos normally used with arudino microcontrollers. I've also included one for the SG90 9g servo (typically blue). The ServoEasing library was used within…

Curtain Hook with overlapping

Extended the original to make the side overlap.

AMD Ryzen IHS lapping aid

Disclaimer: I don't take any responsibility of anything. Especially regarding this device :). Anyway, lapping CPUs has been a bit extreme side of PC hobby for 20 years or so. Most of the time I don't bother but this time I wanted to see…

Cat Flap Mosquito Screen - Oneway Flapping mod

We let our cats leave the house only on certain conditions but let them come back whenever they want, So i've designed this modification to replace the original “Top” part. Print and install all the other parts as in the original. The…

Closer for overlapping curtains

The blackout curtains for the sliding door at the condo kept gapping open, letting the sun to get into our eyes. I could not find a solution online, so designed this one. One of the pictures shows the print from the outside, the other…

Stereographic projection flat overlapping circles

Three sets of concentric circles overlap. High res version created locally with openscad and this script: http://jsfiddle.net/threonin/3j2c2pwe/ Category: Math Art

Roller blind holder to prevent flapping

Holds the bottom end of a Harry Corry roller blind. These sometimes flap around in the wind and scrape slightly against the wall, making a noise. If the weighted bottom bar of the blind (" is in this pocket this will not make (so much)…

Balistuff washer lapping puck

This is sized for washers with a 3/16" I.D. and are .020" thick. I recommend lapping on 2500grt paper on a very flat surface, and then polish with a microfiber cloth that has fine lapping paste. You will be pretty surprised by how much…

Flap the Bat - Halloween Automaton with Flapping Wings

A black bat flies in front of a big yellow full moon. Turn the little pumpkin knob in the cloud and the bat bobs up and down while both wings flap – up when the body goes down, down when it goes up. A pure mechanical automaton made of…

Overlapping Ovals

Just a remix of a simple cylinder by SzymiX . I was testing something with this co-extrusion filament trying to see if I could make the colors spiral up the print. Sadly test one was an utter failure…Onto test two.

30mm Wheeler Scope Lapping Kit Gridfinity

I needed an organizer to hold my scope ring lapping kit, and decided to CAD one up and make it gridfinity too, hope you enjoy. Printed on a Bambu A1 with Red Matte PLA Print settings: Layer Height: 0.2mm 2 perimeters, 5 top, 3 bottom 15%…

Gridfinity bin wheeler lapping tool V2

This is a gridfinity bin for a Wheeler Lapping tool

Masport Cleveland - Reel Mower Backlapping Adaptor

Helpful adaptor for backlapping your Masport Cleveland. Uses a drill with a ½" adaptor

Chibi Todo Aoi From Jujutsu Kaisen Clapping Boogie Woogie Figurine 3D Printable

Detailed 3D printable Chibi Todo Aoi From Jujutsu Kaisen Clapping Boogie Woogie figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon…

Kingfisher RC diff ring lapping tool

This is a tool to assist in lapping (or polishing) ball diff rings for RC cars. The idea is to mount the diff ring on the gear, and use that gear in the base plate to move the diff ring around on the grinding surface. I made for gears for…

Kinetic Butterfly, Print in Place, Flapping Wings, Eccentric Cam - 3D Printable STL File

A unique 3D printable creation — this Kinetic Butterfly, Print in Place, Flapping Wings, Eccentric Cam Mechanism Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - PLY File -…

Knife Screw and Pivot Lapping Jig

This is a custom lapping jig for folding knife hardware. Its meant to sand down those last few thousanths of an inch you need to have the perfect length for a bushing, pivot barrel, or screw. This is loosely inspired by knife component…

McLane Backlapping Adapter

This tool is used fit on the sprocket of a McLane reel mower so that the reel can be backlapped. Two different versions available. My preferred print is used with a 5/16 Carriage Bolt and Anti-spin washer from Home Depot. The other print…

Gridfinity bin wheeler lapping tool

Functional Clapping Hands Baseball Cap Attachment

Overview Bring one of cartoon history's greatest novelty hats to life! Inspired by the iconic clapping-hands cap from SpongeBob SquarePants , this model turns any standard baseball cap into a fully functional, wearable clapping-hands hat.…

Parametric Reel Mower Sharpening Adaptor (Backlapping)

Back lapping is a cheap and easy method of sharpening a reel mower. I have marked in the images what measurements you need to make the adapter fit your mower. Add some extra for tolerance reasons. When in doubt go larger, so long as the…

stupid clapping machine

This stupid contraption i made is really really dumb but it should work hipothethicly , the idea is to have a audio monitor looking for sudden sound spikes looking like an hand clap and if so make the servos go together and mimic a clap…

Flapping vulture

A flapping vulture, printed in place.

Closer for overlapping curtains

The blackout curtains for the sliding door at the condo kept gapping open, letting the sun to get into our eyes. I could not find a solution online, so designed this one. One of the pictures shows the print from the outside, the other…

Seatbelt Holders - Stop the flapping!

A lot of vehicles out there have the issue with the seatbelts (especially the rears) flapping and clapping against the plastic trim or the seat when the windows are open and they are unbuckled. This model was designed for my 2026 Ford…

Overlapping slim Magnetic curtain clips

Magnets 10mm 8mm 6mm x2.5mm. layer height 0.15-0.20mm. Nozzle 0.4mm

Articulated Owl — Wing-Flapping Wise Friend

A wobbly little wonder. The Articulated Duck brings that soft, cheerful energy straight to your print bed — articulated wings and body flow that makes it feel like it’s waddling even when still. Dual-color prints highlight its bright beak…

Overlapping Magnetic curtain clips

Magnets 10mm 8mm 6mm x2.5mm. I printed them in esun pla+. and layer height 0.15-0.20mm. Nozzle 0.4mm

Overlapping curtain clips

I recommend printing it in PETG or ASA And if they do not hang directly in sunlight, you can use PLA 25-30% Infill 0.15-0.20 Layer height